Ive just installed Windows 7 beta onto an empty partition in my PC thats running Vista Home Premium x64. If I boot the PC i get no boot menu, it goes straight into Vista. If I put the Windows 7 installation dvd in my drive it goes straight into Windows 7. Both operating systems are working fine but how do I create a boot menu instead of using the installation dvd to start Windows 7?
View 2 RepliesI have XP (x86) installed on one partition.
Last night I installed Windows 7 (x64) on a separate partition.
Anytime I had tried this in the past, using Vista, it always detected the Windows XP partition, and gave me a boot menu with "Earlier Version of Windows" option to boot to.
This is not so with Windows 7.
How can I get the boot menu to show both options, to boot to XP or to Windows 7?
In the previous O/Ss, you were able to configure the boot menu options in dual boot scenario's by editing the 'boot.ini' this however, is not the case in Windows 7 and past 2000 O/s.
This is because i have an operating systen showing up in my menu that does not exist anymore and i dont want to wipe the O/S (Windows 7) to remove it as i have other O/S that are working fine.
MSI Wind 210 Netbook, 250 gig hd, vista (came with it) then upgraded to Windows 7 (2nd boot option)I deleted the dual boot menu using partition doctor (dumb mistake, dont ask) now all that shows up when I goto boot is,bootmgr is missing,press any key to restart,pressing a key.intel undii, pxe-2.1 (build 082)reboot and select proper boot device,thats it,It came with restore via the f3 key option on boot , but that shows nothing
View 9 Replies View RelatedOk, i have windows 7 already installed fine on my 2x raptor raided drives, i decided to install xp 32 on a new partition on the 2x raided raptors, after using nlite to integrate my raid drivers into the new xp iso (no floppy) it installed fine on the new partition.
However, i saw no boot menu on reboot and every time xp would load by default with f8 showing no other OS to boot. I then ran the windows 7 64 dvd and attempted a repair of startup option, it failed 5 times in a row quoting a corrupt boot sector.
I was all ready to give up when suddenly it just repaired it after the 6th attempt, i did nothing different but it said to reboot so i did and to my incredible relief my win 7 install started booting again.
But again, no boot menu and this time the xp boot has been lost! Is there any way i can manually add something to get a dual boot function running?
So I just got my hands on Windows 7 and wanted to play around with it, and everything works but:
Previous Computer Setup:
I had a dual boot with XP and Vista that worked perfectly (both OS's were on separate HD's and worked / booted correctly.)
Drive C: --------> Vista (Now Windows 7)
Drive D: --------> Windows XP
Problem:
After upgrading my Vista to Windows 7 (Via clean install) I lost my boot menu to choose XP. Now everytime I flip the power it boots DIRECTLY into Windows 7.
How do I recover my boot screen option so I can boot back into XP when I need to?
i did a terrible mistake. i installed windows 7 first on one drive and then i install windows xp on separate drive. and when i restart there was no boot menu to choose the OS from list only windows xp started straight away. i did not knew about EasyBCD . and i put my windows 7 DVD and run recovery. now i can goto windows 7 but xp is missing again. is there any way i will not install xp from beginning and windows 7 can add boot menu in startup to choose xp or 7.
View 4 Replies View RelatedI have successfully formatted my second HD into 3 partitions: Windows 7 x86, Windows 7 64 bit, and XP. The startup menu works fine but the two Windows 7 lines are the same. I may not be using the correct term for startup menu, but it is the one that appears when dual booting. Anyway, I would like to find the file so I can change the two identical lines to different lines. That is, instead of both saying "windows 7" I can change them to "Windows 7 x86" and Windows 7 x64" or something like that. Anybody know where that file is?
View 5 Replies View RelatedI have messed up my dual boot of XP Pro and Seven
Seven was working well, but XP was playing up.
I did a restore from an earlier acronis image of XP.
XP now works again, but as you have guessed I have lost the dual boot menu to select Windows 7 when I bootup.
I know boot.ini does not apply with Seven.
Please tell me how to get my neatly tweaked Seven back on the boot menu,
i have a new work laptop with xp sp3 on it. I want to install w7 64 bit as a dual boot, but only have 1 physical drive. i cannot remove my current installation as it is pre-build from work, but can partition the drive etc. However on trying to install w7 64 bit I get a message saying cannot install windows 7 on efi drive with mbr, not gpt. Can I do what I want without screwing up my xp installation?
View 5 Replies View Relateddual booting windows 7 home premium x64 with linux fedora 14 on dual independantly dedicated drives. i am a college student with moderate computer (windows) knowledge but am doing software development and would like to play around with some linux for a class. i have no prior experience with linux and have minimal knowledge of operation. i am currently running windows 7 and would like to keep it as my primary os. i do not wish to share media files across drives or os's, windows does that just fine as is and i dont want to get into a third drive. my current drive is a 1tb wd black caviar hdd. it is also currently 2/3rds full and the desktop is about 6 months old so i would rather not partition the drive for a dual boot. i would think that there are some other advantages for the os's operating independantly off their own drives other than if one hdd dies i should still have the other with its os still ok. i have read some topics about RAID configs with dual boot setups with dual drives like this but am not very familiar with RAID. is there a RAID config that would be beneficial in this situation? i currently do not have a RAID card. my tower internals are not very accessible and i dont like the idea of disconnecting drives depending on which os i want to operate.
View 5 Replies View RelatedAs currently configured, XP is on drive C:, Win 7 was added to drive E:, and the system is currently run as a dual boot. Attempting to boot without the XP drive present will yield a "NTLDR is missing" error very early in the boot process.
I have already tried the following:
(1) I moved the hidden Windows Boot Manager files (bootmgr as well as the associated Boot folder) from the XP drive root to the Win 7 drive root.
(2) After physically removing the XP drive, I rebooted to the Win 7 installation DVD, and used the "Repair Your Computer" option to pull up the "Recovery Tools". Then, using the command prompt utility, ...
(3) I attempted to write a new boot sector to the Windows 7 disk using the command: Bootrec /fixboot, - that yields an error though. The Bootrec /fixmbr claimed success, but ultimately did not make Win 7 drive bootable.
I had to reconnect drive C: just to boot into Win 7 again to write this. I do have files backed up, but to format and reinstall files would take many hours beyond just the time to transfer 400 GB of data, since I have dozens of purchased applications that need to be freshly reinstalled and validated as well. Basically I want my E: drive now to be my boot drive while the C: drive is reformatted and used for general storage.
Any idea how to make my Win 7 drive bootable? Do I need a partition program that is more adept at creating a viable boot sector, or is that even the problem?
I am running an Advent desktop PC and its stats are as follows; Intel Core i5-2310 CPU @ 2.90GHz 8GB RAM Win 7 64 bit.The problem I am having is when ever i boot up the computer it shows the Advent logo-screen where I can access the boot menu etc but then it goes to a black screen with a cursor/underscore flashing in the top left... This screen stays for quite a while and I am not sure if it stops because of a key I have pressed or just because it has run its course but after it disappears the computer goes back to the logo-screen for a moment and proceeds to boot up as normal except slightly slower than usual.It is a relatively new computer and it has no problems running at all once the boot up is complete it is fast and as friendly as ever.
View 4 Replies View Relatedwhen booting up windows 7 why do I have to key in F1 for windows to start up
View 1 Replies View RelatedI have Win XP 32 bit on my old drive. I buy Win 7 full retail and a new HD. I set bios to boot from cd etc. Win 7 starts up. It shows the 2 drives, so I select new drive...no problems. It starts install. I leave it to do its stuff.When I come back its up and all ok.I dint get any option to boot from XP. The drive was listed as "SYSTEM" but not old Windows or anything.
Also ASUS chipset drivers dont work and they were listed as 7 drivers.I tried Vista drivers but it normally shuts down and restarts. Nothing.
I got this new computer and at some point I went into the boot option to try and install my PC to it's factory settings but when I opened up the boot option it showed something like this but not exactly:
1. MC43689SGDAL7
2. MATSHITADVD-RAM
This is very random and unusual and I have found no fix and as you should know it should look something like this:
1. CD/DVD Drive
2. USB
3. Hard Drive
4. something else
Even in my Bios menu it shows the same thing and I cannot change it so I can't boot from a USB or CD, etc.
I installed Windows 7 on a partitioned harddrive with vista on the other half. After the installation i have my boot menu with:Windows 7, Windows Vista, Windows vista still works but when i try and load windows 7 i get a boot error message
View 9 Replies View RelatedI have dual boot with Xp and windows 7.when i log into my Xp all the restore points being deleted from windows 7.when i check the disk management information in 7 it shows windows 7 create a logical drive with my Xp primary drive.even i am hide the drive from both windows means Xp drive from windows 7 and vice verse.So i like to unmount or remove the drive partition of windows 7 from Xp and Xp primary from windows 7.So that they dont affect each others system files with being deleted the partitions.
View 1 Replies View RelatedI installed opensuse 12.1 on dual boot along with my other windows 7 installation. Installation of opensuse is successful and i can use it. But when I tried to use windows 7 on grub, it says bootmgr is missing. I've already encountered this problem a long time ago so i tried to use bootrec /fixmbr, bootrec /rebuildbcd and bootrec /fixboot in the recovery console in the windows 7 DVD. Rebuildbcd and fixboot did not work and it said something like it cannot find my windows installation. I also tried bootrec /scanos, it returned a windows installation on D:\Windows but my windows is in drive C. I think this has something to do with me messing up the active partition in disk management a month ago but i already fixed it by setting the active partition to the system reserved partition. Only fixmbr is successful, but now i can't boot on any OS because it says: Missing operating system.I also tried bcdboot C:\Windows but it failed with a message that goes like: Failure when attempting to copy boot information..
View 2 Replies View RelatedI was having win 7 RTM and i tried to installl OSx86 in second hard disk
after few failure i successfully installed OSx86 in my secondary had disk now the problem is that i cant boot win 7
i changed boot order i tried windows 7 disk repair
but both failed
im getting some Boot mldr missing...
Actually even OSx86 is not booting i get OSx86 boot screen with two hard disk to select if i select windows disk it still says the same Boot mldr missing.
I can't get Win 7 to boot after setting up dual boot (Ubuntu 10.10) on my GF's laptop. I'll describe the problem and everything that has been tried so far. REALLY hoping somebody has an idea, I'm getting desperate.I installed Ubuntu last night via the Live CD. Used the Live version to install alongside Windows and partition the drive, install Grub, etc. At reboot, after POST it would just go to a black screen with a flashing cursor. I could only run off the live CD. A forum member determined the Grub was trying to load from the wrong partition. We changed that and voila! Grub now loads properly. I can boot into Ubunto via Grub with zero problems. HOWEVER: when I try to boot into Win 7 from Grub, it just locks at the same flashing cursor of death screen. The 7 partition is till intact, I can see and access all the files on the 7 partition from within Ubuntu, however 7 will not boot. I have tried downloading and burning the Win 7 repair disk and doing all of the following,Running the automatic Start Up Repair - several times. All it does is remove Grub, but booting still goes to the flashing cursor and I have to reinstall Grub again to be able to do anything after POST.I have used the command prompt to run "bootsect /nt60 SYS /mbr". Has the same effect as above.I have used all the bootsec.exe /fixmbr, /fixboot, and /rebuildBCD commands. Again, all have the same effect and I have to reinstall Grub to get anywhere.I don't have an installation disk to try and just do a repair install because Asus apparently doesn't feel that I would need one of these. All I have is the recovery disks from the Asus AIRecovery application that want to just re-format the entire drive and start over. This isn't an option. It's my GF's laptop (mine gave up the ghost last week) and we both have WAY too much highly important data on here. Not to mention she would castrate me . Now from all my research the only other thing I've come across that sounds possible is that the boot flag needs to be set to a different partition. Somebody had a somewhat similar problem and it turned out the way Dell set up the system the boot flag had to be moved to a recovery partition and it worked fine. I'm wondering if Asus has something similar going on, but I can't figure out how to move the boot flag. I'm going on 12 straight hours of working on this now
View 9 Replies View RelatedI setup an XP/Windows 7 dual boot on two drives. Currently C: Windows 7, D:XP
Love Windows 7 and now I'm ready to convert to single boot Windows 7.
I'm not real savy re. bcdedit so will need very detailed instructions
I did find the command line in Windows 7 by going through accessories but I'm scared to go further without help.
Eventually I want to clean up the D:xp and use it for storage etc.
I'm guessing this procedure may have already be written up but I can't seem to find it.
How to Change the OS Name in Windows Boot Manager ?
View 0 Replies View RelatedI been trying to boot from a cd and it won't let me I went into the boot order and it seems to not have the cd option there
View 3 Replies View RelatedI am doing an upgrade from XP to Windows 7. I have done this numerous times with no problems until today. I put in the disc for the upgrade and loaded the Boot Device Menu (F12). Then I selected Onboard or USB CD-ROM Drive and I can hear the CD spinning but it does nothing. It wont load and the 'Onboard or USB CD-ROM Drive' option stays highlighted. I just installed XP doing this exact same method because I installed a new harddrive and I had no problems. It only occurred once I put in the W7 disc.
View 2 Replies View RelatedI recently added a hard drive to my computer (SSD), and installed Windows 7 x64 onto it. The result being a dual boot system, which by default boots to the SSD, and optionally (by Windows Boot Menu), can be booted to the original drive (standard mechanical drive).
Initial setup went fine, however I decided to customize the Windows Boot Menu, so that logical names could be associated with each operating system instance. To do this I used EasyBCD and I altered the names in the Windows Boot Menu from: Quote:
Windows 7
Windows 7
to... Quote:
Windows 7 - SSD
Windows 7 - Standard Drive
Shortly after the modification I noticed that I was no longer able to boot into the original OS. Instead I was being presented with a "Repair Windows" option. Figuring that my EasyBCD "tampering" may have had something to do with the issue I decided to change the names back to "Windows 7" in the Windows Boot Menu. However doing so had no positive impact on boot up of the original OS.
After booting again into the original OS I accepted the "Repair Windows" option, and then left the computer over night to do it's "thing". After completion of the "Repair" the situation has deteriorated -
* Windows doesn't load (the same as before)
* Windows doesn't present a "Repair Windows" option (it did before)
* The computer reboots a short period after the "Starting Windows" screen is presented
As a side note the drive is in good health, and all data on it can be read from within Windows 7 when I boot to the SSD OS.
I have installed a year before UBUNTU on my pc with dual boot (i.e. use either window 7 or ubuntu).the NTFS partition that contains the UBUNTU was corrupted and i wanted to take the dual boot from my PC. I used the instructions from the web site: http://www.makeuseof.com/tag/how-to-...t-environment/but the disk management tool would not let me delete the NTFS partition.Could any one help me delete the NTFS partition and use just windows 7 as the only boot. step by step help would be great.
View 8 Replies View RelatedI got windows 7 running fine for a while now and ever since my XP did not boot anymore.I was not worried to much about it since i did not need it at the time.But now i really REALY need it,See i got all my Cubase projects in there and my cubase plug-ins al setup in XP and i need to get to the projects?At first it did not do anything and using easyBCD did not help either.I cpoied ntldr and detect to the root of C: wich contains my XP and now it shows the bootscreen but hangs on a black screen.The thing is right before the bootscreen shows i see the text" invalid boot.ini" flashing by very quick.I am able to enter that winXP install in safe mode and i tried safe/vga mode as well wich works but thats all.
View 9 Replies View RelatedI have a laptop I bought a year ago on which a created a dual boot Win 7 (32bit)/Win XP SP3 install, each on a separate partition. It was my first Win 7/XP dual boot install, and my first personal system that I allowed to have a Win 7 install on it at all, so although I have plenty of experience working on pretty much every previous version of Windows, I have very little experience with Win 7 and dual boot configs.
Today about 2 hours ago my audio spontaneously stopped worked for no good reason, so after shutting down each program to see if that cured it (which it didn't), I restarted the system. Out of the blue, for the first time I've ever experienced it, I received the msg "MBR Error 1" - Press any key to boot from floppy. I don't have a floppy of course on my laptop, and if I press any key I simply get the same msg. I turned the system off for a few minutes to make sure it was a good cold boot, but every time I still get the same msg. I tried switching the BIOS setting from IDE to AHCI (IDE is required for XP to boot, AHCI required for Win 7), but I still get the same error msg before I'm even prompted with the OS boot selection, so it made no difference of course.
I looked up this issue and found various suggestions, but none of the ones I found took into consideration a dual boot config., they were all Win 7 specific solutions. I don't what to try and repair the MBR only to have it screw up my dual boot config and be unable to access XP, which is what I use almost exclusively, nor do i want to lose access to Win 7 if at all possible.
I had a backup HD of my complete system that I saved several months ago when I upgraded my HD, and I periodically refresh the most important files on it, so I'm currently running on the laptop in question using my old HD, and it's working just fine. Worst case I can just clone my old HD to my newer HD that's screwed up, but I'll still lose a lot of changes I've made to the OS since I upgraded the HD and have to reinstall and config a number of programs, so that's my last option. I'll also have to back up about 200GB of data from the newer HD which is much larger than my old HD, and then restore it back after the clone, something that will take a lot of time and unncessary effort if I can just fix the MBR.
I'm having a problem every time I power on the system. I'm dual booting vista ultimate with win 7 build 7100; with vista I have no problem, but with 7 every time I start the system the first boot attempt gives me the error 0xc000000e after the boot manager display: "the boot selection failed because a required device is inaccessible".;after a reset the system boots 7 with no problems. Win 7 is installed in a brand new hd(seagate barracuda 1.5tb) and vista on a second hd.
I've search the web for people with a similar problem with no success. I've tryed already many solutions but the problem persists(latest bios for the motherboard, latest intel sata drivers, etc). I'm hoping that this could be a bug in win 7 instead of a hardware failure for the hd. Again, the strange thing is that this only happen after the power on. After that first error, no matter how many reboots, the system always boot without problems.
I recently added a hard drive to my computer (SSD), and installed Windows 7 x64 onto it. The result being a dual boot system, which by default boots to the SSD, and optionally (by Windows Boot Menu), can be booted to the original drive (standard mechanical drive).
Initial setup went fine, however I decided to customize the Windows Boot Menu, so that logical names could be associated with each operating system instance. To do this I used EasyBCD and I altered the names in the Windows Boot Menu from: Quote: Windows 7 Windows 7 to... Quote: Windows 7 - SSD Windows 7 - Standard Drive Shortly after the modification I noticed that I was no longer able to boot into the original OS. Instead I was being presented with a "Repair Windows" option. Figuring that my EasyBCD "tampering" may have had something to do with the issue I decided to change the names back to "Windows 7" in the Windows Boot Menu. However doing so had no positive impact on boot up of the original OS.
After booting again into the original OS I accepted the "Repair Windows" option, and then left the computer over night to do it's "thing". After completion of the "Repair" the situation has deteriorated -
* Windows doesn't load (the same as before)
* Windows doesn't present a "Repair Windows" option (it did before)
* The computer reboots a short period after the "Starting Windows" screen is presented
As a side note the drive is in good health, and all data on it can be read from within Windows 7 when I boot to the SSD OS.