I have successfully formatted my second HD into 3 partitions: Windows 7 x86, Windows 7 64 bit, and XP. The startup menu works fine but the two Windows 7 lines are the same. I may not be using the correct term for startup menu, but it is the one that appears when dual booting. Anyway, I would like to find the file so I can change the two identical lines to different lines. That is, instead of both saying "windows 7" I can change them to "Windows 7 x86" and Windows 7 x64" or something like that. Anybody know where that file is?
Last night I installed Windows 7 (x64) on a separate partition.
Anytime I had tried this in the past, using Vista, it always detected the Windows XP partition, and gave me a boot menu with "Earlier Version of Windows" option to boot to.
This is not so with Windows 7.
How can I get the boot menu to show both options, to boot to XP or to Windows 7?
Ive just installed Windows 7 beta onto an empty partition in my PC thats running Vista Home Premium x64. If I boot the PC i get no boot menu, it goes straight into Vista. If I put the Windows 7 installation dvd in my drive it goes straight into Windows 7. Both operating systems are working fine but how do I create a boot menu instead of using the installation dvd to start Windows 7?
My pc switches on but doesn't boot. I normally just get a black screen with a flashing underscore in top left corner. I can get into the start up menu and then the boot menu and boot the pc that way. I have on the odd occasion received an error message, something about the keyboard, i cant remember exactly its been a while since i seen that message.
In the previous O/Ss, you were able to configure the boot menu options in dual boot scenario's by editing the 'boot.ini' this however, is not the case in Windows 7 and past 2000 O/s.
This is because i have an operating systen showing up in my menu that does not exist anymore and i dont want to wipe the O/S (Windows 7) to remove it as i have other O/S that are working fine.
MSI Wind 210 Netbook, 250 gig hd, vista (came with it) then upgraded to Windows 7 (2nd boot option)I deleted the dual boot menu using partition doctor (dumb mistake, dont ask) now all that shows up when I goto boot is,bootmgr is missing,press any key to restart,pressing a key.intel undii, pxe-2.1 (build 082)reboot and select proper boot device,thats it,It came with restore via the f3 key option on boot , but that shows nothing
Ok, i have windows 7 already installed fine on my 2x raptor raided drives, i decided to install xp 32 on a new partition on the 2x raided raptors, after using nlite to integrate my raid drivers into the new xp iso (no floppy) it installed fine on the new partition.
However, i saw no boot menu on reboot and every time xp would load by default with f8 showing no other OS to boot. I then ran the windows 7 64 dvd and attempted a repair of startup option, it failed 5 times in a row quoting a corrupt boot sector.
I was all ready to give up when suddenly it just repaired it after the 6th attempt, i did nothing different but it said to reboot so i did and to my incredible relief my win 7 install started booting again.
But again, no boot menu and this time the xp boot has been lost! Is there any way i can manually add something to get a dual boot function running?
So I just got my hands on Windows 7 and wanted to play around with it, and everything works but:
Previous Computer Setup:
I had a dual boot with XP and Vista that worked perfectly (both OS's were on separate HD's and worked / booted correctly.)
Drive C: --------> Vista (Now Windows 7)
Drive D: --------> Windows XP
Problem:
After upgrading my Vista to Windows 7 (Via clean install) I lost my boot menu to choose XP. Now everytime I flip the power it boots DIRECTLY into Windows 7.
How do I recover my boot screen option so I can boot back into XP when I need to?
i did a terrible mistake. i installed windows 7 first on one drive and then i install windows xp on separate drive. and when i restart there was no boot menu to choose the OS from list only windows xp started straight away. i did not knew about EasyBCD . and i put my windows 7 DVD and run recovery. now i can goto windows 7 but xp is missing again. is there any way i will not install xp from beginning and windows 7 can add boot menu in startup to choose xp or 7.
I'm running Windows 7 Home Premium, 64 bit, on a Gateway, motherboard is EG43M. It is a dual-core Pentium, CPU E5300 @ 2.60GHz.
I have a virus that calls for running Windows Defender Offline. I'm trying to boot my PC from a USB drive to run WDO, but it doesn't work. I've tried pressing F12 on startup to enter the Boot Menu to change it. How do I gain entry to the Boot Menu to change to boot from USB drive?
My Husbands Toshiba Satellite P300 running windows 7 professional, will not boot past the black Toshiba screen F2 and F12 do not work it is frozen on the black Toshiba screen so I cannot change the boot menu to reformat.Is there another way to load the windows 7 or my repair disk? My granddaughter tripped over the cord and the computer had a small fall onto carpet but fired up and worked perfectly well, The third time I restarted it froze.
After installing Windows 7, the MBR was corrupted and I had to reinstall... no problem with 7, but now I have two instances of Windows7 on the mbr screen at startup. the one that works and a non-working one under it. Again, not a real problem, but for the sake of neatness, can I remove this line from the screen? I am still dual booting with XP until I am confident that all my processes will work in 7, then I will want to remove the XP partition and bypass the screen to choose the OS.
Any place out there to get info on these things? Confession - the MBR was borked when I removed the IBM partition with XP utilities, etc and left the XP and 7 partitions, expanding 7 to use the space. Since I have Student download copy from DigitalRiver of 7 I don't have a disk to put in and repair. Disk is in the mail (right!) so a reinstall was the only fix I could come up with.
(Later) OK, I just read a little about a repair disk that I can make, now that I,m running again. Is this the right direction? Is there a fixmbr command?
I have recently "tried" a Linux .ISO CD and took the wrong option and partially installed ubuntu as a dual boot option. Since that time I have discovered Oracle VirtualBox and much prefer this route to look at and experiment with linux. However I have a legacy of my untutored fiddling in the form of a splash screen at power up [straight after POST] of a dual boot option - Windows 7 or ubuntu p which I dont want. Its an annoyance rather than a catastrophy but I am at a loss as what/how to 'edit' this startup file to remove the dual bootup option. I have tried FIXMBR from the repair option but the dual selection option remains.
I have installed a year before UBUNTU on my pc with dual boot (i.e. use either window 7 or ubuntu).the NTFS partition that contains the UBUNTU was corrupted and i wanted to take the dual boot from my PC. I used the instructions from the web site: http://www.makeuseof.com/tag/how-to-...t-environment/but the disk management tool would not let me delete the NTFS partition.Could any one help me delete the NTFS partition and use just windows 7 as the only boot. step by step help would be great.
In 7 everything is all right.7 is c: and the boot partition is hidden.
But in XP the hidden partition is c: and visible.XP is d:,so some programs use default dir can't work.I tried disk management to change xp to c: but didn't succeed.
Anyway to change the drive letters and hide the 100m partition?
I had Windows XP Pro running on my PC and I've installed Windows 7 using dual-boot.I want to create a command line BAT file that will allow me to change the default OS system before I boot. For example If I'm working on XP and wants 7 to start-up automatically then I'll execute the batch file and it will manipulate the boot info so that i won't have to select it, and if i work in Windos 7 and want to automatically restart to xp i will run another BAT file.I was able to do it in windows 7 using the command line bcdedit.exe application tha can control any aspect of the boot settings, but i couldn't find anyway to control the boot settings from within XP because the boot "belongs" to windows 7 and XP doesn't even "know it" or able to access it.
However I have a third-party application able to do that called VISTABOOTPRO, so i can assume it is indeed possible, but i want to create a simple one-click procedure to do it for me.
i have a new work laptop with xp sp3 on it. I want to install w7 64 bit as a dual boot, but only have 1 physical drive. i cannot remove my current installation as it is pre-build from work, but can partition the drive etc. However on trying to install w7 64 bit I get a message saying cannot install windows 7 on efi drive with mbr, not gpt. Can I do what I want without screwing up my xp installation?
dual booting windows 7 home premium x64 with linux fedora 14 on dual independantly dedicated drives. i am a college student with moderate computer (windows) knowledge but am doing software development and would like to play around with some linux for a class. i have no prior experience with linux and have minimal knowledge of operation. i am currently running windows 7 and would like to keep it as my primary os. i do not wish to share media files across drives or os's, windows does that just fine as is and i dont want to get into a third drive. my current drive is a 1tb wd black caviar hdd. it is also currently 2/3rds full and the desktop is about 6 months old so i would rather not partition the drive for a dual boot. i would think that there are some other advantages for the os's operating independantly off their own drives other than if one hdd dies i should still have the other with its os still ok. i have read some topics about RAID configs with dual boot setups with dual drives like this but am not very familiar with RAID. is there a RAID config that would be beneficial in this situation? i currently do not have a RAID card. my tower internals are not very accessible and i dont like the idea of disconnecting drives depending on which os i want to operate.
after installing Kaspersky pure in my computer, I got rid of the System fix virus but all the missing files or links,I did the uhhide from this forum and claimes back my desktop icons, but my startup menu still shows empty files,I cant seem my microsoft office and others
As currently configured, XP is on drive C:, Win 7 was added to drive E:, and the system is currently run as a dual boot. Attempting to boot without the XP drive present will yield a "NTLDR is missing" error very early in the boot process.
I have already tried the following:
(1) I moved the hidden Windows Boot Manager files (bootmgr as well as the associated Boot folder) from the XP drive root to the Win 7 drive root.
(2) After physically removing the XP drive, I rebooted to the Win 7 installation DVD, and used the "Repair Your Computer" option to pull up the "Recovery Tools". Then, using the command prompt utility, ...
(3) I attempted to write a new boot sector to the Windows 7 disk using the command: Bootrec /fixboot, - that yields an error though. The Bootrec /fixmbr claimed success, but ultimately did not make Win 7 drive bootable.
I had to reconnect drive C: just to boot into Win 7 again to write this. I do have files backed up, but to format and reinstall files would take many hours beyond just the time to transfer 400 GB of data, since I have dozens of purchased applications that need to be freshly reinstalled and validated as well. Basically I want my E: drive now to be my boot drive while the C: drive is reformatted and used for general storage.
Any idea how to make my Win 7 drive bootable? Do I need a partition program that is more adept at creating a viable boot sector, or is that even the problem?
I have no idea ho i did this but all of my startup programs on start menu as well as desktop shotcuts they end in .ink? And all of it has the logo for VLc media player? so basically when i click it it loads on that program but it will not load it as it only does media files. And all the time I have to right click to say open file location then it finally loads the program. So my question is how do I put it all back to normal? I'll post a screenshot so you can better understand what I am talking about.
I was watching a movie on my desktop, and all of a sudden, I clicked out of it, and all of my desktop icons were gone and when I clicked on the start up menu it gave me just an empty text.
if it is possible to change to send to menu to a move to command? For Reference: [URL]
That is a small, easy tutorial to add a move to menu to the right click context menu, but it still isnt what I want it to do.
I do not want to have to hold the shift key when I right click and send to whatever location I have in the send to menu. I also do not want to have to tell it where I want to move the file each time using the method shown in the above link. I simply want to my computer to just move the file to the location in the menu instead of copying it there. Can this be done? Am I asking to much of my operating system? I am running windows 7 Ultimate x64.
I am running an Advent desktop PC and its stats are as follows; Intel Core i5-2310 CPU @ 2.90GHz 8GB RAM Win 7 64 bit.The problem I am having is when ever i boot up the computer it shows the Advent logo-screen where I can access the boot menu etc but then it goes to a black screen with a cursor/underscore flashing in the top left... This screen stays for quite a while and I am not sure if it stops because of a key I have pressed or just because it has run its course but after it disappears the computer goes back to the logo-screen for a moment and proceeds to boot up as normal except slightly slower than usual.It is a relatively new computer and it has no problems running at all once the boot up is complete it is fast and as friendly as ever.
I recently went from Xp home 32-bit to Win 7 home 64-bit and there is one thing that its annoying to me I would love to change but I do not know if it can be changed or how to do so if if it can.
Now to be very specific I linked to what i would like to have changed. i would like to change that to this look:
see that folder with the green arrow under the favorites menu. that is what I'd lvoe to have back again.
i do not like this whole my computer->c:->Program files-> winamp-> skins(that is an example) and to go back have to click on on the previous folder name. It would be nice to have that button again. so i can move back to the previous folder easier and faster. as well as the back button so i can click move quicker between folders.
