Dual Boot - BSOD At StartUP
Dec 22, 2009
I have a problem when I install Windows 7 + XP in different machines. I do this:
1º HDD --> Partition 1 60 GB || Partition 2 60 GB || Partition 3 The rest of the disk || Partition 4 (40 GB)
NTFS NTFS NTFS FAT32
2º Install windows in partition 1.
3º Restore an image of XP in partition 2 and change "boot.ini" to start in second partition.
4º Install GAG.
Everything seems to be ok, but sometimes I get a BSOD on startup with both: Windows 7 and XP.
When I get a BSOD I restart the computer and it usually works.
Any idea?
I have passed MemTest86 and I have no errors.
The error code is 0x0000007B ( ...., ...., ...., ...)
View 11 Replies
ADVERTISEMENT
Nov 10, 2009
After installing Windows 7, the MBR was corrupted and I had to reinstall... no problem with 7, but now I have two instances of Windows7 on the mbr screen at startup. the one that works and a non-working one under it. Again, not a real problem, but for the sake of neatness, can I remove this line from the screen? I am still dual booting with XP until I am confident that all my processes will work in 7, then I will want to remove the XP partition and bypass the screen to choose the OS.
Any place out there to get info on these things? Confession - the MBR was borked when I removed the IBM partition with XP utilities, etc and left the XP and 7 partitions, expanding 7 to use the space. Since I have Student download copy from DigitalRiver of 7 I don't have a disk to put in and repair. Disk is in the mail (right!) so a reinstall was the only fix I could come up with.
(Later) OK, I just read a little about a repair disk that I can make, now that I,m running again. Is this the right direction? Is there a fixmbr command?
View 5 Replies
View Related
Jul 20, 2010
I have recently "tried" a Linux .ISO CD and took the wrong option and partially installed ubuntu as a dual boot option. Since that time I have discovered Oracle VirtualBox and much prefer this route to look at and experiment with linux. However I have a legacy of my untutored fiddling in the form of a splash screen at power up [straight after POST] of a dual boot option - Windows 7 or ubuntu p which I dont want. Its an annoyance rather than a catastrophy but I am at a loss as what/how to 'edit' this startup file to remove the dual bootup option. I have tried FIXMBR from the repair option but the dual selection option remains.
View 3 Replies
View Related
Jul 15, 2009
I have successfully formatted my second HD into 3 partitions: Windows 7 x86, Windows 7 64 bit, and XP. The startup menu works fine but the two Windows 7 lines are the same. I may not be using the correct term for startup menu, but it is the one that appears when dual booting. Anyway, I would like to find the file so I can change the two identical lines to different lines. That is, instead of both saying "windows 7" I can change them to "Windows 7 x86" and Windows 7 x64" or something like that. Anybody know where that file is?
View 5 Replies
View Related
Aug 28, 2012
how to enable dual boot os selection during system startup after installing xp in Windows 7
View 2 Replies
View Related
Mar 7, 2012
I get BSOD both in XP and Windows 7, both installed on the same machine (on different HDD if it makes any diferenece). On XP i get : DRIVER_IRQL_NOT_LESS_OR_EQUAL On Windows 7 : IRQL_NOT_LESS_OR_EQUAL and MEMORY_MANAGEMENT
View 3 Replies
View Related
Dec 23, 2009
I've followed your steps and have created a partition of 50GB for installing XP Pro 64bit.
However, when I boot from my Windows C.D, it loads up the Windows files but then I get a blue screen error....
A problem has been detected and windows has been shut down to prevent damage to your computer.
If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:
Check to be sure you have adequate disk space. If a driver is identified in the Stop message, disable the driver or check with the manufacturer for driver updates. Try chaging video adapters.
Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.
Technical Information:
*** STOP: 0x0000007E (0xC0000005, 0xF85F9AD9, 0xF898B7A4, 0xF898B4A4)
What could the problem be?
View 4 Replies
View Related
Dec 26, 2012
Recently my computer has been randomly just giving me the BSOD. Normally this problem was resolved by a simple restart but tonight about an hour before I posted this, the blue screen sent me back to startup but instead of giving me the usual "Security mode" and Regular Startup. It gave me Startup Repair and normal startup. After clicking normal startup just to see if it would correct itself like normal,my pc instantly BSOD'd, bringing me back to my two options. I've been sitting here staring at the startup repair screen for about an hour now.
View 2 Replies
View Related
Mar 28, 2012
I have a new Toshiba Qosmio X770 laptop with Dual 120 Gb SSD drives. From the factory it had Win 7 Home. I upgraded immediately to Win 7 Ultimate x64. I set up the VM to use XP (Have to use XP because current dev projects with work are stuck in old ages on XP for the time being). I can run the XP Mode in VM fine and even Visual Studios functions fine. There is a problem with the 3rd party drivers for the USB comm boards we are using, the USB drivers apparently cannot be shared across the VM environment for the particular ones we are using.
View 1 Replies
View Related
Nov 20, 2009
i was wondering if i could get any tips or advice, i keep getting bsod error message when trying to install xp, it looks like i have to install the sata drivers, i think i have to slipstream the driver with xp as from my post here, but i cant find the sata driver for my toshiba hard drive anywhere. My sony vgn-aw120j does not have drivers for xp on the sony website and toshiba does not have drivers on theirs. my hard drive is a mk-3252gsx from toshiba,
View 9 Replies
View Related
Jan 17, 2012
My home pc is currently running windows xp, it was turned off without shutting down and has since shown a bsod when it is starting up. This occurs in safe mode aswell as regular startup. I was advised to try repairing using my xp disk, or reinstalling the os I cannot find my XP disk but I do have a new retail copy of 7 home premium 64 bit. I was hoping I could fix the problem with that. I have changed the boot priority in BIOS to the DVD drive but it doesn't load, the disk spins up for a few seconds before spinning back down. This repeats for approx 30 seconds before giving up and booting the hard drive.
View 4 Replies
View Related
Jul 7, 2012
This is my first custom built computer. I've had the same similar problem for the past year. I have continuous problems starting up and BSOD. My computer will not start up properly at times. It also seems like this problem happens if my computer is off, not in sleep mode, for longer than 24 hours. It involves several restarts. I've checked my hard drive and memory for bad sectors and not found anything. I've run both the memtest and the windows memory test several times and found no problems.There was one post I found on a seperate site that talked about ASRock m/b having problem with Ram voltage so I've manually changed the BIOS to be the voltage required for the Ram. Seemed like it fixed it temporarily but quickly started getting more BSOD.Recently updated AMD drivers and was completely unable to get into Windows. When I restored the system to before the AMD updates I was able to get into Windows.
Some of the BSOD:Bad_Pool_Header Bug_Code Memory_Management
Below are my system specs:Processor: AMD Phenom II X4 840 3.2GHz Socket AM3 95W Quad-Core Motherboard: ASRock 890GX PRO3 AM3+ AMD 890GX RAM: 4 GB - Patriot G Series �Sector 5� Edition 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 Hard Drive: 2 TB - HITACHI Deskstar 7K2000 Graphics Card: Visiontek 900299 Radeon HD 4670 Graphic Card - 750 MHz Core - 1 GB DDR3 SDRAM - PCI Express 2.0 x16 - 1600 MHz Memory Clock - 2560 x 1600 - CrossFireX DVD Drive: ASUS 24X DVD Burner Windows 7 . . . - x86 (x64) - Professional - Full retail version - Age of system (hardware)? 1 Year - What is the age of OS installation - 1 Year (reinstalled once)
View 9 Replies
View Related
Oct 3, 2012
Had this error yesterday after starting the computer. Did a startup repair but it didnt fix it. Can't boot into safe mode. Right now doing startup repair again.
View 1 Replies
View Related
Jul 27, 2012
i used to get the BSOD very often so i decided to recover the system to the initial state . i did that and everything was fine , then i updated the windows 7 service pack 1 and finished the installation and rebooted my computer , the start-up at least took half an hour at that time and the service pack 1 installation showed "not successful " i tried to again to update the service pack1 which showed 73.6mb - 892.6mb so i updated it again and again the same thing happened.
View 7 Replies
View Related
Sep 12, 2011
i have a new work laptop with xp sp3 on it. I want to install w7 64 bit as a dual boot, but only have 1 physical drive. i cannot remove my current installation as it is pre-build from work, but can partition the drive etc. However on trying to install w7 64 bit I get a message saying cannot install windows 7 on efi drive with mbr, not gpt. Can I do what I want without screwing up my xp installation?
View 5 Replies
View Related
Feb 4, 2011
dual booting windows 7 home premium x64 with linux fedora 14 on dual independantly dedicated drives. i am a college student with moderate computer (windows) knowledge but am doing software development and would like to play around with some linux for a class. i have no prior experience with linux and have minimal knowledge of operation. i am currently running windows 7 and would like to keep it as my primary os. i do not wish to share media files across drives or os's, windows does that just fine as is and i dont want to get into a third drive. my current drive is a 1tb wd black caviar hdd. it is also currently 2/3rds full and the desktop is about 6 months old so i would rather not partition the drive for a dual boot. i would think that there are some other advantages for the os's operating independantly off their own drives other than if one hdd dies i should still have the other with its os still ok. i have read some topics about RAID configs with dual boot setups with dual drives like this but am not very familiar with RAID. is there a RAID config that would be beneficial in this situation? i currently do not have a RAID card. my tower internals are not very accessible and i dont like the idea of disconnecting drives depending on which os i want to operate.
View 5 Replies
View Related
Nov 12, 2009
As currently configured, XP is on drive C:, Win 7 was added to drive E:, and the system is currently run as a dual boot. Attempting to boot without the XP drive present will yield a "NTLDR is missing" error very early in the boot process.
I have already tried the following:
(1) I moved the hidden Windows Boot Manager files (bootmgr as well as the associated Boot folder) from the XP drive root to the Win 7 drive root.
(2) After physically removing the XP drive, I rebooted to the Win 7 installation DVD, and used the "Repair Your Computer" option to pull up the "Recovery Tools". Then, using the command prompt utility, ...
(3) I attempted to write a new boot sector to the Windows 7 disk using the command: Bootrec /fixboot, - that yields an error though. The Bootrec /fixmbr claimed success, but ultimately did not make Win 7 drive bootable.
I had to reconnect drive C: just to boot into Win 7 again to write this. I do have files backed up, but to format and reinstall files would take many hours beyond just the time to transfer 400 GB of data, since I have dozens of purchased applications that need to be freshly reinstalled and validated as well. Basically I want my E: drive now to be my boot drive while the C: drive is reformatted and used for general storage.
Any idea how to make my Win 7 drive bootable? Do I need a partition program that is more adept at creating a viable boot sector, or is that even the problem?
View 9 Replies
View Related
Jan 2, 2010
I have Win XP 32 bit on my old drive. I buy Win 7 full retail and a new HD. I set bios to boot from cd etc. Win 7 starts up. It shows the 2 drives, so I select new drive...no problems. It starts install. I leave it to do its stuff.When I come back its up and all ok.I dint get any option to boot from XP. The drive was listed as "SYSTEM" but not old Windows or anything.
Also ASUS chipset drivers dont work and they were listed as 7 drivers.I tried Vista drivers but it normally shuts down and restarts. Nothing.
View 9 Replies
View Related
Oct 14, 2009
I installed Windows 7 on a partitioned harddrive with vista on the other half. After the installation i have my boot menu with:Windows 7, Windows Vista, Windows vista still works but when i try and load windows 7 i get a boot error message
View 9 Replies
View Related
Oct 30, 2009
I have XP (x86) installed on one partition.
Last night I installed Windows 7 (x64) on a separate partition.
Anytime I had tried this in the past, using Vista, it always detected the Windows XP partition, and gave me a boot menu with "Earlier Version of Windows" option to boot to.
This is not so with Windows 7.
How can I get the boot menu to show both options, to boot to XP or to Windows 7?
View 9 Replies
View Related
Aug 8, 2012
I have dual boot with Xp and windows 7.when i log into my Xp all the restore points being deleted from windows 7.when i check the disk management information in 7 it shows windows 7 create a logical drive with my Xp primary drive.even i am hide the drive from both windows means Xp drive from windows 7 and vice verse.So i like to unmount or remove the drive partition of windows 7 from Xp and Xp primary from windows 7.So that they dont affect each others system files with being deleted the partitions.
View 1 Replies
View Related
Apr 6, 2012
I installed opensuse 12.1 on dual boot along with my other windows 7 installation. Installation of opensuse is successful and i can use it. But when I tried to use windows 7 on grub, it says bootmgr is missing. I've already encountered this problem a long time ago so i tried to use bootrec /fixmbr, bootrec /rebuildbcd and bootrec /fixboot in the recovery console in the windows 7 DVD. Rebuildbcd and fixboot did not work and it said something like it cannot find my windows installation. I also tried bootrec /scanos, it returned a windows installation on D:\Windows but my windows is in drive C. I think this has something to do with me messing up the active partition in disk management a month ago but i already fixed it by setting the active partition to the system reserved partition. Only fixmbr is successful, but now i can't boot on any OS because it says: Missing operating system.I also tried bcdboot C:\Windows but it failed with a message that goes like: Failure when attempting to copy boot information..
View 2 Replies
View Related
Sep 24, 2009
I was having win 7 RTM and i tried to installl OSx86 in second hard disk
after few failure i successfully installed OSx86 in my secondary had disk now the problem is that i cant boot win 7
i changed boot order i tried windows 7 disk repair
but both failed
im getting some Boot mldr missing...
Actually even OSx86 is not booting i get OSx86 boot screen with two hard disk to select if i select windows disk it still says the same Boot mldr missing.
View 3 Replies
View Related
Dec 3, 2010
I can't get Win 7 to boot after setting up dual boot (Ubuntu 10.10) on my GF's laptop. I'll describe the problem and everything that has been tried so far. REALLY hoping somebody has an idea, I'm getting desperate.I installed Ubuntu last night via the Live CD. Used the Live version to install alongside Windows and partition the drive, install Grub, etc. At reboot, after POST it would just go to a black screen with a flashing cursor. I could only run off the live CD. A forum member determined the Grub was trying to load from the wrong partition. We changed that and voila! Grub now loads properly. I can boot into Ubunto via Grub with zero problems. HOWEVER: when I try to boot into Win 7 from Grub, it just locks at the same flashing cursor of death screen. The 7 partition is till intact, I can see and access all the files on the 7 partition from within Ubuntu, however 7 will not boot. I have tried downloading and burning the Win 7 repair disk and doing all of the following,Running the automatic Start Up Repair - several times. All it does is remove Grub, but booting still goes to the flashing cursor and I have to reinstall Grub again to be able to do anything after POST.I have used the command prompt to run "bootsect /nt60 SYS /mbr". Has the same effect as above.I have used all the bootsec.exe /fixmbr, /fixboot, and /rebuildBCD commands. Again, all have the same effect and I have to reinstall Grub to get anywhere.I don't have an installation disk to try and just do a repair install because Asus apparently doesn't feel that I would need one of these. All I have is the recovery disks from the Asus AIRecovery application that want to just re-format the entire drive and start over. This isn't an option. It's my GF's laptop (mine gave up the ghost last week) and we both have WAY too much highly important data on here. Not to mention she would castrate me . Now from all my research the only other thing I've come across that sounds possible is that the boot flag needs to be set to a different partition. Somebody had a somewhat similar problem and it turned out the way Dell set up the system the boot flag had to be moved to a recovery partition and it worked fine. I'm wondering if Asus has something similar going on, but I can't figure out how to move the boot flag. I'm going on 12 straight hours of working on this now
View 9 Replies
View Related
Aug 27, 2009
I setup an XP/Windows 7 dual boot on two drives. Currently C: Windows 7, D:XP
Love Windows 7 and now I'm ready to convert to single boot Windows 7.
I'm not real savy re. bcdedit so will need very detailed instructions
I did find the command line in Windows 7 by going through accessories but I'm scared to go further without help.
Eventually I want to clean up the D:xp and use it for storage etc.
I'm guessing this procedure may have already be written up but I can't seem to find it.
View 9 Replies
View Related
Mar 11, 2009
How to Change the OS Name in Windows Boot Manager ?
View 0 Replies
View Related
Dec 14, 2012
windows 7 startup repair on every boot but after startup repair hibernate works. How to fix?
View 1 Replies
View Related
Feb 23, 2012
I recently added a hard drive to my computer (SSD), and installed Windows 7 x64 onto it. The result being a dual boot system, which by default boots to the SSD, and optionally (by Windows Boot Menu), can be booted to the original drive (standard mechanical drive).
Initial setup went fine, however I decided to customize the Windows Boot Menu, so that logical names could be associated with each operating system instance. To do this I used EasyBCD and I altered the names in the Windows Boot Menu from: Quote:
Windows 7
Windows 7
to... Quote:
Windows 7 - SSD
Windows 7 - Standard Drive
Shortly after the modification I noticed that I was no longer able to boot into the original OS. Instead I was being presented with a "Repair Windows" option. Figuring that my EasyBCD "tampering" may have had something to do with the issue I decided to change the names back to "Windows 7" in the Windows Boot Menu. However doing so had no positive impact on boot up of the original OS.
After booting again into the original OS I accepted the "Repair Windows" option, and then left the computer over night to do it's "thing". After completion of the "Repair" the situation has deteriorated -
* Windows doesn't load (the same as before)
* Windows doesn't present a "Repair Windows" option (it did before)
* The computer reboots a short period after the "Starting Windows" screen is presented
As a side note the drive is in good health, and all data on it can be read from within Windows 7 when I boot to the SSD OS.
View 2 Replies
View Related
Aug 6, 2012
I have installed a year before UBUNTU on my pc with dual boot (i.e. use either window 7 or ubuntu).the NTFS partition that contains the UBUNTU was corrupted and i wanted to take the dual boot from my PC. I used the instructions from the web site: http://www.makeuseof.com/tag/how-to-...t-environment/but the disk management tool would not let me delete the NTFS partition.Could any one help me delete the NTFS partition and use just windows 7 as the only boot. step by step help would be great.
View 8 Replies
View Related
Feb 17, 2009
I got windows 7 running fine for a while now and ever since my XP did not boot anymore.I was not worried to much about it since i did not need it at the time.But now i really REALY need it,See i got all my Cubase projects in there and my cubase plug-ins al setup in XP and i need to get to the projects?At first it did not do anything and using easyBCD did not help either.I cpoied ntldr and detect to the root of C: wich contains my XP and now it shows the bootscreen but hangs on a black screen.The thing is right before the bootscreen shows i see the text" invalid boot.ini" flashing by very quick.I am able to enter that winXP install in safe mode and i tried safe/vga mode as well wich works but thats all.
View 9 Replies
View Related
Nov 9, 2012
I have a laptop I bought a year ago on which a created a dual boot Win 7 (32bit)/Win XP SP3 install, each on a separate partition. It was my first Win 7/XP dual boot install, and my first personal system that I allowed to have a Win 7 install on it at all, so although I have plenty of experience working on pretty much every previous version of Windows, I have very little experience with Win 7 and dual boot configs.
Today about 2 hours ago my audio spontaneously stopped worked for no good reason, so after shutting down each program to see if that cured it (which it didn't), I restarted the system. Out of the blue, for the first time I've ever experienced it, I received the msg "MBR Error 1" - Press any key to boot from floppy. I don't have a floppy of course on my laptop, and if I press any key I simply get the same msg. I turned the system off for a few minutes to make sure it was a good cold boot, but every time I still get the same msg. I tried switching the BIOS setting from IDE to AHCI (IDE is required for XP to boot, AHCI required for Win 7), but I still get the same error msg before I'm even prompted with the OS boot selection, so it made no difference of course.
I looked up this issue and found various suggestions, but none of the ones I found took into consideration a dual boot config., they were all Win 7 specific solutions. I don't what to try and repair the MBR only to have it screw up my dual boot config and be unable to access XP, which is what I use almost exclusively, nor do i want to lose access to Win 7 if at all possible.
I had a backup HD of my complete system that I saved several months ago when I upgraded my HD, and I periodically refresh the most important files on it, so I'm currently running on the laptop in question using my old HD, and it's working just fine. Worst case I can just clone my old HD to my newer HD that's screwed up, but I'll still lose a lot of changes I've made to the OS since I upgraded the HD and have to reinstall and config a number of programs, so that's my last option. I'll also have to back up about 200GB of data from the newer HD which is much larger than my old HD, and then restore it back after the clone, something that will take a lot of time and unncessary effort if I can just fix the MBR.
View 4 Replies
View Related
