BSOD When Trying To Dual Boot With XP Pro 64bit
Dec 23, 2009
I've followed your steps and have created a partition of 50GB for installing XP Pro 64bit.
However, when I boot from my Windows C.D, it loads up the Windows files but then I get a blue screen error....
A problem has been detected and windows has been shut down to prevent damage to your computer.
If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:
Check to be sure you have adequate disk space. If a driver is identified in the Stop message, disable the driver or check with the manufacturer for driver updates. Try chaging video adapters.
Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.
Technical Information:
*** STOP: 0x0000007E (0xC0000005, 0xF85F9AD9, 0xF898B7A4, 0xF898B4A4)
What could the problem be?
View 4 Replies
ADVERTISEMENT
Oct 22, 2009
Whats the score with dual booting with raid 0? I guess i install the older OS(xp 32bit) first with the 32bit xp driver and then install windows 7 64bit on a separate partition with the 64bit driver. My real question is will this cause any kind of conflicts etc if using some of the drive partitions(1250gb drive numerous partitions) as communal drives. Is there anything i need to be wary of when running these two os at different "bits" within the same physical drives?
View 1 Replies
View Related
Dec 11, 2010
I am trying to dual boot 7 64bit and xp 32bit I have 7 up and running on a 90gb ssd and I have two 500gb WD drives in RAID 0 where I am wanting to create a 60gb partition to run xp. I have setup my raid array in bios but for some reason the boot option is grayed out. I installed xp anyway and got it to boot but as soon as I start loading drivers or updates then it crashes mother board is a xfx750i.
View 5 Replies
View Related
Nov 3, 2009
I have Windows 7 Home Premium 64 bit upgrade currently installed on my pc, but I am having wireless internet installation problems. TP-Link WN851N adapter (No Win 7 drivers availabe, but it works fine with Linux Ubuntu 9.14).
My ethernet connection works fine.
So as a process of elimination (I am on holidays and heve to much spare time lol) I want to install Win 7 32bit in dual boot with Win 7 64 bit.
Can it be done?
View 1 Replies
View Related
Jul 31, 2010
I have installed w7 64bit to take advantaqe of the 4GB ram. My scanner and a few progs I use do not work even with compatability mode. On another pc with w7 32bit the scanner and progs work. Would it be possible to install both W7 32bit and 64bit on the same pc either on different partitions or hard drives and use either? If this is not possible and I have to use just 32bit is there a simple way of converting from 64bit to 32bit without totally removing the installation?
View 7 Replies
View Related
Jan 28, 2011
I had Windows XP and Windows 7 32-bit dual boot set up on my system. I decided to do away with XP and install Windows 7 64-bit instead. But I can't fully migrate to 64-bit yet as some of my old software don't run in 64-bit. So I clean-installed Windows 7 64-bit after formatting the XP partition. But now I no longer get a boot menu to boot into Windows 7 32-bit. I can only boot into 64-bit. But the 32-bit partition is in tact. Is there any way I can get a boot menu with options to use both 32-bit and 64-bit versions?
View 9 Replies
View Related
Feb 21, 2011
I have 3 hard drives in my computer. One for Windows XP Professional, one for Windows 7 Ultimate and one just for storage. My question is can I change my Windows 7 installation to 64 bit and still be able to run XP?
View 4 Replies
View Related
Jul 17, 2010
Basically i would like to know how to have a dual boot on my PC, where when i start up my PC it automatically starts up the 64bit version of Windows 7 but if i choose i can easily change to the 32bit without a hassle.
2nd Question, if i make a dual boot PC i would have to split my HDD im guessing. If i would split up my HDD and save something while using the 32bit version how would i get the saved file over to the 64bit version? Do i have to use a USB or can i drag it into the 64bit part of the HDD?
View 7 Replies
View Related
Jul 20, 2010
1) Can I just add my old Windows XP Pro 32-bit SATA hard drive to my new computer (due to arrive in a few days) that has Windows 7 Home Premium 64-bit installed and set up a dual boot? It would be nice to keep all my programs and files as they are. Or do I have to do a clean install? XP Pro was pre-installed on my 2nd to last system and I have a Product Key.
2) Once a dual boot is setup would there be a way to allocate different memory to each O/S? My new computer will have 8GB RAM and I want to take full advantage of it for the 64-bit O/S, but I understand that 4GB of RAM is the maximum for 32-bit systems and that it is sometimes a problem going that high (so I was thinking like 3 GB for the 32-bit O/S).
3) If I have both 7 64-bit and XP Pro 32-bit installed, will the old hardware like my scanner or a fax/modem card work like it did on my old computer for the new XP boot because they are not listed as compatible under Windows 7?
The reason I want to have a dual boot with XP Pro is I'm worried some of my most used programs will no longer work on the 64-bit system. And I heard the virtual XP is not that great, besides the fact that I would have to upgrade for $89 to get that capability.
View 3 Replies
View Related
Oct 23, 2009
Im thinking I might regret. I was told its better to build ur own, so I did and nothing but problems! I had vista 64 / xp 32 bit bit and was having nothing but problems trying to get my video cards to work right! So someone told me to get Windows 7 and Ill have no problems. Wrong!
My problem now is that when I turn on the computer it doesn't give me the option to chose which operating system it just loads into Windows 7. Does anyone have an idea on how to fix this? When I hit the (my computer) option it sees Xp as the D drive. When I loaded Windows 7 I just threw the disc in and followed the directions. I didn't reformat anything cause the disc does it for u.
View 5 Replies
View Related
Jan 3, 2012
I am running Windows 7 home premium 64bit. When the notebook boots up, I get two options: Windows XP Pro 64bit 2003 setup and/or Windows 7. How I could remove the unwanted Windows XP boot? which is the {identifier} of Windows XP Pro 64bit 2003 that I should delete?in MS-DOS command: bcdedit/enum I found
"Boot Manager"
resumeobject {7ef9cf4c-22d�-11e1-9497-c3b9ceb2d7b8}
"BOOT Loader"
recoverysequence {7ef9cf4e-22d�-11e1-9497-c3b9ceb2d7b8}
resumeobject {7ef9cf4c-22d�-11e1-9497-c3b9ceb2d7b8}
[code]....
View 9 Replies
View Related
Jun 23, 2011
I have just purchased a new pc that came with Windows 7 Home Premium 64-bit, which wont run my company software, which was made in 1995, 16 bit. This 16bit software ran fine on my previous pc, which had Windows 7 Starter 32-bit. But the 64 bit Windows 7 version wont run it, I cant use Windows XP Mode on my version of Windows 7, need Pro - Ultimate Version.
I want to install and run the Windows 7 32-bit I have, on my new pc (I still have the installation disk) on a separate partition and keep the 64 bit version to. Is this possible to install both 32 bit and 64 bit versions of Windows 7 and then select which to run when the pc boots?
View 3 Replies
View Related
Mar 7, 2012
I get BSOD both in XP and Windows 7, both installed on the same machine (on different HDD if it makes any diferenece). On XP i get : DRIVER_IRQL_NOT_LESS_OR_EQUAL On Windows 7 : IRQL_NOT_LESS_OR_EQUAL and MEMORY_MANAGEMENT
View 3 Replies
View Related
Dec 22, 2009
I have a problem when I install Windows 7 + XP in different machines. I do this:
1º HDD --> Partition 1 60 GB || Partition 2 60 GB || Partition 3 The rest of the disk || Partition 4 (40 GB)
NTFS NTFS NTFS FAT32
2º Install windows in partition 1.
3º Restore an image of XP in partition 2 and change "boot.ini" to start in second partition.
4º Install GAG.
Everything seems to be ok, but sometimes I get a BSOD on startup with both: Windows 7 and XP.
When I get a BSOD I restart the computer and it usually works.
Any idea?
I have passed MemTest86 and I have no errors.
The error code is 0x0000007B ( ...., ...., ...., ...)
View 11 Replies
View Related
Mar 28, 2012
I have a new Toshiba Qosmio X770 laptop with Dual 120 Gb SSD drives. From the factory it had Win 7 Home. I upgraded immediately to Win 7 Ultimate x64. I set up the VM to use XP (Have to use XP because current dev projects with work are stuck in old ages on XP for the time being). I can run the XP Mode in VM fine and even Visual Studios functions fine. There is a problem with the 3rd party drivers for the USB comm boards we are using, the USB drivers apparently cannot be shared across the VM environment for the particular ones we are using.
View 1 Replies
View Related
Nov 20, 2009
i was wondering if i could get any tips or advice, i keep getting bsod error message when trying to install xp, it looks like i have to install the sata drivers, i think i have to slipstream the driver with xp as from my post here, but i cant find the sata driver for my toshiba hard drive anywhere. My sony vgn-aw120j does not have drivers for xp on the sony website and toshiba does not have drivers on theirs. my hard drive is a mk-3252gsx from toshiba,
View 9 Replies
View Related
Jun 25, 2012
I have another laptop and its a HP 2230s. I originally installed Windows 7 professional 64bit. But I have swapped the ram into my Lenovo ThinkPad. So the HP now has 2GB. I created a new partition and installed Vista Business 32bit on it. When I started the install windows .exe program in Windows 7, everything went well until it rebooted. When I rebooted, windows said something like:
Windows Boot manager:
The system cannot boot because of a recent change to files/hardware. (Something like that). Insert your windows disk.
So I just rebooted my laptop with the vista disk inside and installed. After, when everything was working, I wanted to go to the Windows 7 partition to un-install programs and copy some files over to the vista partition, the laptop just booted into vista.
I downloaded the easy BCD editior and visual BCD editor. (in the vista partition), I clicked the auto fix in visual BCD editor. It detected my windows installations. At the boot screen, I can select either Windows 7 or Vista. But when I select 7, the same error message appears.
Then I rebooted my laptop with a USB containing the Windows 7 (64bit) recovery tools. After, I don't have the message again. But when it goes to the starting windows animation, it stops halfway and it gets a BSOD. I tried debugging mode, it worked.
I found out that the larger partition, (Windows 7) is the C: drive. But when I boot into the smaller partition, (Windows Vista), the drive is also C:!. So I don't know what I could do.
I insert the windows 7 disk and repaired my installation, it just boots into windows 7. But when I insert the Vista disk and repaired my installation, it just boots into Vista!
View 9 Replies
View Related
Oct 28, 2009
I use VPN-1 SecureClient to connect to my workplace and I hear that it doesn't play well with 64bit Windows 7. So I'm wanting to do all my non-work applications with Windows 7.And then when I need to do work, I'll just reboot under XP.
View 7 Replies
View Related
Sep 12, 2011
i have a new work laptop with xp sp3 on it. I want to install w7 64 bit as a dual boot, but only have 1 physical drive. i cannot remove my current installation as it is pre-build from work, but can partition the drive etc. However on trying to install w7 64 bit I get a message saying cannot install windows 7 on efi drive with mbr, not gpt. Can I do what I want without screwing up my xp installation?
View 5 Replies
View Related
Feb 4, 2011
dual booting windows 7 home premium x64 with linux fedora 14 on dual independantly dedicated drives. i am a college student with moderate computer (windows) knowledge but am doing software development and would like to play around with some linux for a class. i have no prior experience with linux and have minimal knowledge of operation. i am currently running windows 7 and would like to keep it as my primary os. i do not wish to share media files across drives or os's, windows does that just fine as is and i dont want to get into a third drive. my current drive is a 1tb wd black caviar hdd. it is also currently 2/3rds full and the desktop is about 6 months old so i would rather not partition the drive for a dual boot. i would think that there are some other advantages for the os's operating independantly off their own drives other than if one hdd dies i should still have the other with its os still ok. i have read some topics about RAID configs with dual boot setups with dual drives like this but am not very familiar with RAID. is there a RAID config that would be beneficial in this situation? i currently do not have a RAID card. my tower internals are not very accessible and i dont like the idea of disconnecting drives depending on which os i want to operate.
View 5 Replies
View Related
Nov 12, 2009
As currently configured, XP is on drive C:, Win 7 was added to drive E:, and the system is currently run as a dual boot. Attempting to boot without the XP drive present will yield a "NTLDR is missing" error very early in the boot process.
I have already tried the following:
(1) I moved the hidden Windows Boot Manager files (bootmgr as well as the associated Boot folder) from the XP drive root to the Win 7 drive root.
(2) After physically removing the XP drive, I rebooted to the Win 7 installation DVD, and used the "Repair Your Computer" option to pull up the "Recovery Tools". Then, using the command prompt utility, ...
(3) I attempted to write a new boot sector to the Windows 7 disk using the command: Bootrec /fixboot, - that yields an error though. The Bootrec /fixmbr claimed success, but ultimately did not make Win 7 drive bootable.
I had to reconnect drive C: just to boot into Win 7 again to write this. I do have files backed up, but to format and reinstall files would take many hours beyond just the time to transfer 400 GB of data, since I have dozens of purchased applications that need to be freshly reinstalled and validated as well. Basically I want my E: drive now to be my boot drive while the C: drive is reformatted and used for general storage.
Any idea how to make my Win 7 drive bootable? Do I need a partition program that is more adept at creating a viable boot sector, or is that even the problem?
View 9 Replies
View Related
Mar 2, 2011
Can I boot Windows 7 64bit on a 32bit processor if the Windows installation took place on a 64bit processor?
View 10 Replies
View Related
Jan 2, 2010
I have Win XP 32 bit on my old drive. I buy Win 7 full retail and a new HD. I set bios to boot from cd etc. Win 7 starts up. It shows the 2 drives, so I select new drive...no problems. It starts install. I leave it to do its stuff.When I come back its up and all ok.I dint get any option to boot from XP. The drive was listed as "SYSTEM" but not old Windows or anything.
Also ASUS chipset drivers dont work and they were listed as 7 drivers.I tried Vista drivers but it normally shuts down and restarts. Nothing.
View 9 Replies
View Related
Jun 30, 2009
Is it possible to dual boot a 32bit and 64bit system on the same computer?
View 1 Replies
View Related
Oct 14, 2009
I installed Windows 7 on a partitioned harddrive with vista on the other half. After the installation i have my boot menu with:Windows 7, Windows Vista, Windows vista still works but when i try and load windows 7 i get a boot error message
View 9 Replies
View Related
Oct 30, 2009
I have XP (x86) installed on one partition.
Last night I installed Windows 7 (x64) on a separate partition.
Anytime I had tried this in the past, using Vista, it always detected the Windows XP partition, and gave me a boot menu with "Earlier Version of Windows" option to boot to.
This is not so with Windows 7.
How can I get the boot menu to show both options, to boot to XP or to Windows 7?
View 9 Replies
View Related
Aug 8, 2012
I have dual boot with Xp and windows 7.when i log into my Xp all the restore points being deleted from windows 7.when i check the disk management information in 7 it shows windows 7 create a logical drive with my Xp primary drive.even i am hide the drive from both windows means Xp drive from windows 7 and vice verse.So i like to unmount or remove the drive partition of windows 7 from Xp and Xp primary from windows 7.So that they dont affect each others system files with being deleted the partitions.
View 1 Replies
View Related
Apr 6, 2012
I installed opensuse 12.1 on dual boot along with my other windows 7 installation. Installation of opensuse is successful and i can use it. But when I tried to use windows 7 on grub, it says bootmgr is missing. I've already encountered this problem a long time ago so i tried to use bootrec /fixmbr, bootrec /rebuildbcd and bootrec /fixboot in the recovery console in the windows 7 DVD. Rebuildbcd and fixboot did not work and it said something like it cannot find my windows installation. I also tried bootrec /scanos, it returned a windows installation on D:\Windows but my windows is in drive C. I think this has something to do with me messing up the active partition in disk management a month ago but i already fixed it by setting the active partition to the system reserved partition. Only fixmbr is successful, but now i can't boot on any OS because it says: Missing operating system.I also tried bcdboot C:\Windows but it failed with a message that goes like: Failure when attempting to copy boot information..
View 2 Replies
View Related
Sep 24, 2009
I was having win 7 RTM and i tried to installl OSx86 in second hard disk
after few failure i successfully installed OSx86 in my secondary had disk now the problem is that i cant boot win 7
i changed boot order i tried windows 7 disk repair
but both failed
im getting some Boot mldr missing...
Actually even OSx86 is not booting i get OSx86 boot screen with two hard disk to select if i select windows disk it still says the same Boot mldr missing.
View 3 Replies
View Related
Dec 3, 2010
I can't get Win 7 to boot after setting up dual boot (Ubuntu 10.10) on my GF's laptop. I'll describe the problem and everything that has been tried so far. REALLY hoping somebody has an idea, I'm getting desperate.I installed Ubuntu last night via the Live CD. Used the Live version to install alongside Windows and partition the drive, install Grub, etc. At reboot, after POST it would just go to a black screen with a flashing cursor. I could only run off the live CD. A forum member determined the Grub was trying to load from the wrong partition. We changed that and voila! Grub now loads properly. I can boot into Ubunto via Grub with zero problems. HOWEVER: when I try to boot into Win 7 from Grub, it just locks at the same flashing cursor of death screen. The 7 partition is till intact, I can see and access all the files on the 7 partition from within Ubuntu, however 7 will not boot. I have tried downloading and burning the Win 7 repair disk and doing all of the following,Running the automatic Start Up Repair - several times. All it does is remove Grub, but booting still goes to the flashing cursor and I have to reinstall Grub again to be able to do anything after POST.I have used the command prompt to run "bootsect /nt60 SYS /mbr". Has the same effect as above.I have used all the bootsec.exe /fixmbr, /fixboot, and /rebuildBCD commands. Again, all have the same effect and I have to reinstall Grub to get anywhere.I don't have an installation disk to try and just do a repair install because Asus apparently doesn't feel that I would need one of these. All I have is the recovery disks from the Asus AIRecovery application that want to just re-format the entire drive and start over. This isn't an option. It's my GF's laptop (mine gave up the ghost last week) and we both have WAY too much highly important data on here. Not to mention she would castrate me . Now from all my research the only other thing I've come across that sounds possible is that the boot flag needs to be set to a different partition. Somebody had a somewhat similar problem and it turned out the way Dell set up the system the boot flag had to be moved to a recovery partition and it worked fine. I'm wondering if Asus has something similar going on, but I can't figure out how to move the boot flag. I'm going on 12 straight hours of working on this now
View 9 Replies
View Related
Aug 27, 2009
I setup an XP/Windows 7 dual boot on two drives. Currently C: Windows 7, D:XP
Love Windows 7 and now I'm ready to convert to single boot Windows 7.
I'm not real savy re. bcdedit so will need very detailed instructions
I did find the command line in Windows 7 by going through accessories but I'm scared to go further without help.
Eventually I want to clean up the D:xp and use it for storage etc.
I'm guessing this procedure may have already be written up but I can't seem to find it.
View 9 Replies
View Related
