I have a C:Users *directory junction* mapped to D:Users. I used the following to achieve this: "mklink /J C:Users D:Users".if I do a *system image*, will my files on D:Users be backed up? Or should I config another separate *file backup* (not system image) job especially for D:Users?In case D:Users gets backed up, when I restore it will my files be placed in C:Users ou D:Users?
View 1 Replies
Recently I had to re-install Windows, but beforehand I had setup a directory junction for my Google Chrome installation. I did this because my boot drive is an SSD and I wanted to limit some of the writes to it because of cookies, etc. So I setup a directory junction from my C drive (ssd) to my other regular hard drive. Since re-installing Windows, though, I cannot successfully create one. Each time I try and make one, I check my hard drive properties and see that when I am using Google Chrome it is still writing to my SSD,
View 9 Replies View RelatedAs I didnt want any User specific Data on my System Drive, after installing Windows 7 back then I was looking to move the Users Folder to a different Drive.I thought symlinks would be perfect for the task and so I copied C:Users over to E:Users, deleted C:Users and made C:Users a Junction to E:Users.Everything seemed to be working perfectly until today when I was reverting the System to a Restore Point created a few hours ago.Now after the reboot everything seems to be gone and Hell is open... When I tried to login with my Account I use for daily Operation it said "Preparing Desktop" at which Point I knew something terrible happened. As I had already guessed I had an empty default Desktop and all my Stuff, Settings and so on was not there. Additionally a Popup appeared notifing me that I was using a temporary Profile.So I tried to login using the built in Administrator Account, but that too was a temporary Account as the Balloon Tip showed me. I quickly checked E:Users and everything is still there its just not getting loaded for some weird reason.
View 9 Replies View RelatedI am trying to move my thumbnails cache from my SSD to a ramdrive, to stop excessive writes and also speed up the cache.I am using Dataram Ramdisk, and have moved FF cache, IE cache and temp files, and user TEMP and TMP files (but not system TEMP and TMP, which I moved to a HDD) so far.Moving the thumbnails cache is a bit more tricky, but should be doable using junction.
View 9 Replies View RelatedI have been thinking about getting a SATA controler card and a few SSD for my system. I have been looking around for something on this topic and thus far have not found anything talking about it or it is talking about moveing the entire disk.What I want to do is migrate system directories to seperate drives, with the existing install. So it would look like this [code] That is what I want my table to look like, I want to know is it possible with out having to perform a reinstall. Also would I have to assign each drive a new drive letter or would I be able to do NTSF directory mounting after I migrate to the new drive?The way I was thinking about it was, if I added the drives to the system, with drive letters, make a copy of the directory contents, then remove the drive letter and set it up as a mounted directory to a NTSF drive, that may allow me to do it. Then I would have to figure out what to do with the old data to get it off.
View 2 Replies View RelatedA few months ago I've been having problems with my graphic card (MSI R5850 Twin Frozr II 1GB) and PC as it was having BSOD's 24/7. When I was using driver sweeper for my graphic drivers, I think it deleted a directory or two too far. Sorted it out by cleanly installing on a old HDD, and then moving the directories he listed and its files over. Any info about these directories/folders have files in them, what they are called, And if possible can they be moved from one PC to another (e.g. from a friends)? Or are they directories only relative to the persons PC?
View 9 Replies View RelatedI need a solution that can take two given directories, take random files from each and create a new, smaller directory.For example Directory "Photos 2011" has 500 pictures in it and "Photos 2012" has 200 pictures.I would like the program to randomly choose files from each directory and create a directory of those random files into another directory.
View 9 Replies View Relatedi've been on 7-64 now for some 3 months. i used to see "documents and settings" -folder, including "all users" on my explorer tree.from what i understand, this was a junction/shortcut to c:users , however, the whole documents and settings folder is no longer appearing, and with it a bunch of shortcuts that were in the start menu of all users are missing.this leaves me with a creepy feeling that a lot of other program settings could be now gone.how to restore the junction? - i assume that many legacy programs will not work correctly without documents and settings on the system.
View 9 Replies View RelatedRunning Windows 7 and in certain directories file seem to disappear. Most of the disappeared are pdfs or web pages. Though the files do not show up in Windows Explorer, if I try to restore the files by copying from my back-up drive, it tells me they already exist. Also, if I start Adobe Reader and try to open files in the supposedly empty directory, all of the missing pdfs show up.
View 4 Replies View RelatedI was moving the default storage directories from c:users... to the root of D: when I fubared with the desktop one.I pointed it at the root of D: instead of D:Desktop and now I have everything in D:oot on my desktop.
View 3 Replies View RelatedI am sorting out some old backups of old machines and I would like to go through and find all the images that are there so I can delete ones I don't need, ones from installed softwares and that. Is there a program that will show me every image (or just even selected file types so I can do non images too) from all the sub directories from one folder?
View 3 Replies View RelatedHow do you actually add directories to path? Every tutorial I've come across just says tack the path on to the end of the PATH variable after the previous variable's semicolon. That doesn't work. For instance if I want to add a path B:MinGWin I would just add it to the system variable PATH like soand now anything in the bin directory of MinGW should be in the path. Why doesn't this work? It still pulling the "this is not an internal or external command" nonsense on me. I've also tried adding directories on the C drive to path and ended with the same results.
View 2 Replies View Relatedgot a new computer about a month ago and immediately installed Avast as anti-virus. Also have been using Peerblock. Haven't visited any sketchy websites or opened any suspicious e-mails/programs as far as I remember. Last night, I noticed my network icon in the bottom right showed a red "X" even though I am still able to use the internet. I then noticed I would get an error whenever I tried to click the icon to access my directories under explorer or access the control panel. The error message in each instance is "Windows cannot access the specified device path or file. You may not have the appropiate permission to access the item."I am the only user on the computer so am the Administrator. I have 2 Harddrives, both have Windows 7 64-bit installed, the primary being a solid-state drive, and the other being a conventional HD. I ran a full Avast check which didn't find much, just 1 sketchy mp3 I've had for a long time on one of my external HDs (I have 2 connected total) which didn't solve the problem. Also downloaded and ran Spybot S&D which found 2 things but correcting those didn't solve problem. I've rebooted several times and nothing has changed in terms of my access.Also, sometimes when I'm trying to install something it'll say that Windows Installer is messed up and I can't even seem to replace that via the files I tried to download off microsoft's website.I haven't tried booting from my conventional internal HD but I'm afraid that'll get corrupted too so I'm hesitant to yet.
View 3 Replies View RelatedUpgraded Vista to 7. Have 2 directories on the C: drive ($INPACE.~TR and $WINDOWS.~Q) that weren't there before upgrade. Are these old Vista data and do I need them?
View 2 Replies View RelatedI have had to do a fresh installation due to the hd failing. I now have a larger hd partitioned into 2, one (C for the OS and programs and the other (D for the data). Is is possible and advisable to transfer all the directories such as "My Docs" and "My Music" from drive C; to drive D:? If it is OK then how can I do it.
View 5 Replies View RelatedI have a newish PC with an crucial ssd on C: and a WDC Black on D: but for some reason when I open some directories in explorer on D: it takes ages to display the contents, upto 30secs in some cases. And thats for a directory with only 150 items. I can see the green bar in the address bar filling up whilst I`m waiting for it to display
View 8 Replies View RelatedI'm in file explorer. I'm clicked on the parent directory of a large number of subdirectories that include a large number of assorted files.
Is there a way to determine the cumulative size of all files in all directories below the current parent?
For some reason, I cannot get the photo screen saver to include sub directories. I select either my pictures folder, or my pictures library, and in both cases, it only seems to poll those pictures in the root of pictures, as well as sample pictures.. None of the other folders in the pictures folder get polled... Any suggestions?
Also.. for some reason, the screen saver does not start when it should. I can preview it from the screen saver configuration screen, but it doesn't start on it's own after the allotted time....
My computer has a 60Gb SATA2 Solid State Drive which I am installing the OS and I have 2 640Gb SATA3 hard drives, one of which I want to use for both users, program files and program files (x86).I have read and tried many different approaches and I would prefer using a 'symlink' to achieve this rather than any registry hacks, as I have read that a symlink has fewer side effects.
View 4 Replies View RelatedI have problem with my windows 7. When i try to open a directory on LAN, every now and then it begins to reload the directory. The upper bar begins to fill up with green color (in my theme of course), and it takes very long time, like 3, or 4 minutes. In the directory there is not much stuff, maybe 200 or 300 text files. And during this 3 or 4 minutes, the computer is almost blocked.
It is very slow, the browser can not connect to any site on internet, any programs that are working stalls, or becomes very slow. When the directory is loaded, things return to normal. And what is more, this problem does not occur with every directory on the LAN, only with some of them.
What can be the reason and how can I fix it?
I've just re-installed Windows 7 64bit and am moving some files onto my "Programs and Data" hard drive. With the previous install I have moved a number of the Win 7 files onto the this HDD, and I want to do the same now. Since that drive now contains my previous copies of the these directories and files, and I want to keep them, how can I merge the contents. Is it as simple as copying what new content I want from the C drive, changing the location of the USER files in Windows to the HDD, then deleting what is on the C drive?
View 7 Replies View RelatedI have noticed that if someone on the homegroup erases a directory, that directory keeps showing up in the homegroup listings on the rest of
View 7 Replies View RelatedThe search engine does not work on network directories.
View 1 Replies View RelatedI am trying to use this example file I found on microsoft's site[CODE]
View 1 Replies View RelatedI'm going to make a clean install of windows 7 and therefor have some question
1)As I want to make a dual boot install with a Linux distribution I thinking about the Partitioning. I want to make following Partitions: [code] Windows 7 also always creates this small 100MB system restore partition. So what would be the best way to prepare these Partions. I would use GParted Live CD to create the Partition in advance, that everything is the way I like it. But I'm not sure if this works without problems for the 100 MB system restore partition (lasts time I got 2 100 MB partitions)
2) I want to move the Users data to a separate partition and found this guides: User Profiles - Create and Move During Windows 7 Installation [2]=User%20Accounts User Folders - Change Default Location(Don't know which one I chose to do so till now) But I see in Windows 7 there are much more useless directories in the users home directory:I've already learned the new Library system, but I still want to use the Users directory. But there is a great mess. Is there a useful/possible way to prevent the directory to mess up with all the sub directories, often created by some apps, don't really using the directory. Or are you just ignore the users home directory? Usually I got about 5 to 8 sub-directories in each Directory for a tidy system to find everything and have a good ordered system.
When you wish to recover your system using this utility, do you use the Windows program at desktop or the rescue disc I created from the program?The reasn I ask is because I used to have better luck using Acronis' disc rather than the program and wonderd if the same applied here.Also, does the backup remove the existing one so that you only have one at a time or can you have more than one.
View 2 Replies View RelatedIs there a way to use Windows Backup to backup to a network drive?
View 6 Replies View RelatedI backup 100GB of data with Windows Backup and over the time where I do all my backups there is like only 30GB of data which changed from those 100GB and also new files were added. Now my external drive is full. When I now delete the very early backup, the first one where the 100GB of data was saved, will it delete then ALL those 100 GB, or will it just delete the previous versions of the files which were modified AFTER that time, which are in this case the 30GB I talked about? Because otherwhise I would then have in the end an uncomplete, messed up backup.
View 9 Replies View RelatedI currently use Vista Ultimate. I am preparing to move to Windows 7. Is it possible to restore files from Vista Backup and Restore Center to Windows 7 after a clean install?
View 3 Replies View RelatedI'm using Win 7 Pro and want to schedule several backups to my NAS. With Win XP, I was able to schedule multiple backup jobs, which makes things easier since I have 116 GB of data. I like to backup my documents, email files, etc. every week, but my photos, MP3s, etc. don't change as frequently so once a month is fine for that. Not surprisingly, the media collection takes much longer to backup, which is another reason I try to separate it from my "regular" backup.Unfortunately, Win 7 backup only seems to allow one backup job to be scheduled, which seems awfully limited. Am I missing something? Are there other free backup utilities that would work better, or do I need to shell out some cash?
View 4 Replies View RelatedCurrently my PC is set just they way I like so I thought I'd do a backup, the idea being that should something go wrong then I can just use that backup (on DVD's) to do restore my PC to the 'now' settings.
View 3 Replies View Related
