Migrating Windows System Directories
Apr 25, 2012
I have been thinking about getting a SATA controler card and a few SSD for my system. I have been looking around for something on this topic and thus far have not found anything talking about it or it is talking about moveing the entire disk.What I want to do is migrate system directories to seperate drives, with the existing install. So it would look like this [code] That is what I want my table to look like, I want to know is it possible with out having to perform a reinstall. Also would I have to assign each drive a new drive letter or would I be able to do NTSF directory mounting after I migrate to the new drive?The way I was thinking about it was, if I added the drives to the system, with drive letters, make a copy of the directory contents, then remove the drive letter and set it up as a mounted directory to a NTSF drive, that may allow me to do it. Then I would have to figure out what to do with the old data to get it off.
View 2 Replies
ADVERTISEMENT
Sep 24, 2012
i have two hdds rite now C and F (c with windows) and im planning on trimming down C so it will migrate perfectly to a new OCZ 120 gb ssd. Now my problem is that when i migrate to the new SSD the ssd will likely be named C right? if so when i boot with all of my 3 drives in my computer will my computer face any errors since i have a C ssd boot drive and a C hdd storage drive? I will be using this guide to migrate my windows safely: How To Migrate Windows 7 to a Solid State Drive?
View 9 Replies
View Related
Jan 20, 2011
I was not exactly sure if this was the correct forum to use about importing mail.Since the problem is with windows 7, I thought I'd bring it up here. I am moving the files from a xp computers to windows 7. I copied the identity from outlook express to windows 7. Imported the folders into windows live mail. It does such a poor job.I ended up installing outlook 2007 into the xp machine, just to import the outlook express to a pst file. The outlook express folders would not import into outlook 2007 on the windows 7 machine. Just to get outlook 2007 on the xp machine, I had to make sure at least 700 MB. space was free. The machine only had 100 MB. free. I hope microsoft figures out an easier way.
View 1 Replies
View Related
Aug 7, 2012
I will be shortly replacing my XP PC with a Windows 7 64bit PC. I have years worth of emails stored in Outlook Express. What is the best option to keep using these email folders in Windows 7 64bit? I understand that there is no included email client in Windows 7, so what 3rd party is best?
View 9 Replies
View Related
Jun 10, 2011
I normally work with Macs, so this is a rather new experience for me. Here's the issue:
1. Old P4 computer with WinXP died (CPU and PSU died). It is completely non-functional.
2. Made a new PC with all new components and new HDD with fresh Win 7 installation.
3. Plugged in old PC HDD into new PC as a secondary drive.
How on earth do I transfer the account and applications from the old PC's HDD to the new one at this stage? I'm at a complete loss. The Windows Easy Transfer requires the old PC to be functional and concurrently running in one way or the other. All I have is the old HDD it self and the new computer.
On OS X, I'd simply run Migration Assistant, select the other HDD, and migrate. Ezpz.
View 5 Replies
View Related
Jul 18, 2012
I just bought a new Hp Pavilion dv7-6b11. It comes with preinstalled Windows 7 64bit Home Premium. I also installed a new ssd drive. I want to have as primary the ssd with Windows 7 and secondary the original hdd. I mean I want the Hp's Windows 7 version to be installed in my new ssd disk. Ok, I thought I could download Windows 7 original and activate it with my stickers serial. But what about the drivers which are already preintalled? I think it's a classic problem (the "I bought a new laptop, I installed a new ssd and I want to install the original-preinstalled Windows 7 on ssd") but I haven't found a proper solution.
View 8 Replies
View Related
May 28, 2012
I just migrated from Windows XP to Windows 7, and installed Skype, the same version that worked perfectly for me on the old computer, but I can't get the microphone to work. I've gone through all the troubleshooting tips Skype provides, but no matter what I do, it's not working.On the XP I didn't have to do any configuring, just plug in and go. When I plug in the mic on Windows 7 I get a popup from 'Dell Audio. The mic is turned up all the way, not muted, and it says ON at the bottom of the screen.I've gone into the sound settings from Control Panel, and every tab says that everything is working properly, and I've got the in-line mic enabled.
View 14 Replies
View Related
Jul 20, 2012
I've been a 32bit windows 7 user for quite long time and have a lot of softwares installed on my Lenovo g460 laptop. I'm planning to migrate to 64bit windows 7 ultimate OS.can i copy/clone my Drive C (where my OS is installed) to my Samsung S2 Portable External Hard Drive to still use my laptop while wiping out my Internal Drive C for a clean install of the 64bit OS? Will there be a conflict on changing Device Drivers to 64bit if booting up using my external drive? is it really possible to still use my laptop while doing a lot of software re-installations.
View 1 Replies
View Related
Jan 25, 2012
I have a C:Users *directory junction* mapped to D:Users. I used the following to achieve this: "mklink /J C:Users D:Users".if I do a *system image*, will my files on D:Users be backed up? Or should I config another separate *file backup* (not system image) job especially for D:Users?In case D:Users gets backed up, when I restore it will my files be placed in C:Users ou D:Users?
View 1 Replies
View Related
Apr 1, 2012
My current Hdd which contains my OS and program data totals nearly 249GB, obviously SSD's which are this big are very, very expensive, how can I transfer my current OS install to a new SSD in an easy as possible way but keep the OS and the programs that are installed.Some of the stuff on there, like games, I guess I could uninstall and then reinstall them later so that they are no longer on the boot drive.
View 6 Replies
View Related
Dec 31, 2010
A few months ago I've been having problems with my graphic card (MSI R5850 Twin Frozr II 1GB) and PC as it was having BSOD's 24/7. When I was using driver sweeper for my graphic drivers, I think it deleted a directory or two too far. Sorted it out by cleanly installing on a old HDD, and then moving the directories he listed and its files over. Any info about these directories/folders have files in them, what they are called, And if possible can they be moved from one PC to another (e.g. from a friends)? Or are they directories only relative to the persons PC?
View 9 Replies
View Related
Nov 26, 2012
I have a desktop (IDE/PATA) running Umbutu 12 and our laptop (SATA) craped out but the OS is fine (it the CPU that died.) So I slapped it into a usb case and plugged it into desktop.
with the IDE unplugged it boots to Windows so I know that works. but with the IDE in it boots to Umbutu i have modified the bootloader so there is a choice to boot into one or the other. But when I boot windows I'm getting a loop of "windows is loading files..." then reboots. I know when in the laptop i can get to the user screen but not in the desktop.
I've migrated the drive between laptops before but it doesnt work this way
View 1 Replies
View Related
Jul 27, 2010
I'm outgrowing my boot disc. I'd like to migrate the image to a new disc. I will not use anything from Symantec so that eliminates Norton. On Amazon, the negative reviews for Acronis run 2 to 1 so that leaves that out too.Suppose I install Windows 7 on a new disc and run an image restore. Would that give me back my current image with all programs installed?
View 9 Replies
View Related
Oct 11, 2011
I know that since during a windows installation, certain libraries are installed specifically for certain types of chipsets/cpu's and that an abrupt hardware change can cause failures. I read on an article somewhere that you can migrate windows without hardware errors if you manage to get windows to operate on a politically correct mode similar safe mode to boot up with minimal functionality before installing the appropriate drivers for the new board.
View 3 Replies
View Related
Mar 30, 2011
Windows Easy Transfer doesn't work the way I think it should. After completing the Transfer Windows itself takes on a similar look to the original configuration, but the settings that I most desire to migrate are left behind. I'm talking about all the little tweaks to the registry, stuff like mousehoveractivate, tootip delay times, etc. The stuff that is transfered seems aimed more towards applications. Is there something I'm missing? Perhaps there is a way to get the tweaks straight from the registry and transfer them that way?
View 3 Replies
View Related
May 21, 2012
I need a solution that can take two given directories, take random files from each and create a new, smaller directory.For example Directory "Photos 2011" has 500 pictures in it and "Photos 2012" has 200 pictures.I would like the program to randomly choose files from each directory and create a directory of those random files into another directory.
View 9 Replies
View Related
Aug 10, 2010
I have recently purchased a larger drive than my existing 300gb unit, which I would like to move to a new build.
I have tried to restore the disk image to my larger drive but the recovery disk cleverly assigns the 300gb drive as the drive to install on.
Is there some simple way in which I can tell the disk image to install onto the bigger hdd without having to do a clean install, which I was holding back till SP1 came out?
View 9 Replies
View Related
Jul 19, 2011
I just found out about the hidden Administrator account in 7, herp derp. I hate UAC prompts and I want to use the account. How can I migrate everything from my old user account to Administrator while not breaking any program dependencies or anything like that?
View 9 Replies
View Related
Dec 4, 2011
I had a hard drive failure on my XP system, managed to recover nearly all the data and the orginal folder structure sits on my E: on my new Windows 7 system. I was very impressed with Windows 7 when I installed it - better than expected.
Now, I want to transfer many of my settings across to Windows 7. e.g. documents, Firefox and Skype history and contacts etc.
I see the structure is different for Windows 7. Any recommendations or advice on where my previous My Documents stuff should go?
View 4 Replies
View Related
Aug 26, 2009
I have just pre-ordered Windows 7 Home Premium and I wondered if this scenario is possible:
I am currently running Windows Vista Home Premium on a single 500GB SATA hard drive.
I am planning to order a new 1TB drive to copy all of the 500GB data/files/programs onto, and then format and use the 500GB drive to install Windows 7 onto.
I am also planning to use a clone program such as Acronis True Image or Norton Ghost to complete this operation, but what I wanted to know is:
Will the newly copied programs on the 1TB drive still work and be recognised by Windows 7 after I have installed it on the 500GB drive?
And also: When cloning, is it possible to exclude the Vista OS files from being copied to the new drive (as I would not need/want Vista once I am on 7).
View 5 Replies
View Related
Sep 28, 2010
Running Windows 7 and in certain directories file seem to disappear. Most of the disappeared are pdfs or web pages. Though the files do not show up in Windows Explorer, if I try to restore the files by copying from my back-up drive, it tells me they already exist. Also, if I start Adobe Reader and try to open files in the supposedly empty directory, all of the missing pdfs show up.
View 4 Replies
View Related
Aug 11, 2011
I was moving the default storage directories from c:users... to the root of D: when I fubared with the desktop one.I pointed it at the root of D: instead of D:Desktop and now I have everything in D:oot on my desktop.
View 3 Replies
View Related
Oct 1, 2011
I am sorting out some old backups of old machines and I would like to go through and find all the images that are there so I can delete ones I don't need, ones from installed softwares and that. Is there a program that will show me every image (or just even selected file types so I can do non images too) from all the sub directories from one folder?
View 3 Replies
View Related
May 1, 2011
How do you actually add directories to path? Every tutorial I've come across just says tack the path on to the end of the PATH variable after the previous variable's semicolon. That doesn't work. For instance if I want to add a path B:MinGWin I would just add it to the system variable PATH like soand now anything in the bin directory of MinGW should be in the path. Why doesn't this work? It still pulling the "this is not an internal or external command" nonsense on me. I've also tried adding directories on the C drive to path and ended with the same results.
View 2 Replies
View Related
Oct 1, 2011
got a new computer about a month ago and immediately installed Avast as anti-virus. Also have been using Peerblock. Haven't visited any sketchy websites or opened any suspicious e-mails/programs as far as I remember. Last night, I noticed my network icon in the bottom right showed a red "X" even though I am still able to use the internet. I then noticed I would get an error whenever I tried to click the icon to access my directories under explorer or access the control panel. The error message in each instance is "Windows cannot access the specified device path or file. You may not have the appropiate permission to access the item."I am the only user on the computer so am the Administrator. I have 2 Harddrives, both have Windows 7 64-bit installed, the primary being a solid-state drive, and the other being a conventional HD. I ran a full Avast check which didn't find much, just 1 sketchy mp3 I've had for a long time on one of my external HDs (I have 2 connected total) which didn't solve the problem. Also downloaded and ran Spybot S&D which found 2 things but correcting those didn't solve problem. I've rebooted several times and nothing has changed in terms of my access.Also, sometimes when I'm trying to install something it'll say that Windows Installer is messed up and I can't even seem to replace that via the files I tried to download off microsoft's website.I haven't tried booting from my conventional internal HD but I'm afraid that'll get corrupted too so I'm hesitant to yet.
View 3 Replies
View Related
Dec 1, 2009
Upgraded Vista to 7. Have 2 directories on the C: drive ($INPACE.~TR and $WINDOWS.~Q) that weren't there before upgrade. Are these old Vista data and do I need them?
View 2 Replies
View Related
Oct 6, 2010
I have had to do a fresh installation due to the hd failing. I now have a larger hd partitioned into 2, one (C for the OS and programs and the other (D for the data). Is is possible and advisable to transfer all the directories such as "My Docs" and "My Music" from drive C; to drive D:? If it is OK then how can I do it.
View 5 Replies
View Related
Feb 15, 2012
I have a newish PC with an crucial ssd on C: and a WDC Black on D: but for some reason when I open some directories in explorer on D: it takes ages to display the contents, upto 30secs in some cases. And thats for a directory with only 150 items. I can see the green bar in the address bar filling up whilst I`m waiting for it to display
View 8 Replies
View Related
May 7, 2012
I'm in file explorer. I'm clicked on the parent directory of a large number of subdirectories that include a large number of assorted files.
Is there a way to determine the cumulative size of all files in all directories below the current parent?
View 4 Replies
View Related
Sep 28, 2009
For some reason, I cannot get the photo screen saver to include sub directories. I select either my pictures folder, or my pictures library, and in both cases, it only seems to poll those pictures in the root of pictures, as well as sample pictures.. None of the other folders in the pictures folder get polled... Any suggestions?
Also.. for some reason, the screen saver does not start when it should. I can preview it from the screen saver configuration screen, but it doesn't start on it's own after the allotted time....
View 7 Replies
View Related
Oct 14, 2010
My computer has a 60Gb SATA2 Solid State Drive which I am installing the OS and I have 2 640Gb SATA3 hard drives, one of which I want to use for both users, program files and program files (x86).I have read and tried many different approaches and I would prefer using a 'symlink' to achieve this rather than any registry hacks, as I have read that a symlink has fewer side effects.
View 4 Replies
View Related
