How To View All Images In Directory And Sub Directories

Oct 1, 2011

I am sorting out some old backups of old machines and I would like to go through and find all the images that are there so I can delete ones I don't need, ones from installed softwares and that. Is there a program that will show me every image (or just even selected file types so I can do non images too) from all the sub directories from one folder?

View 3 Replies


ADVERTISEMENT

Useless Directories In User Directory & Clean Install Dual Boot Linux

Jun 11, 2011

I'm going to make a clean install of windows 7 and therefor have some question

1)As I want to make a dual boot install with a Linux distribution I thinking about the Partitioning. I want to make following Partitions: [code] Windows 7 also always creates this small 100MB system restore partition. So what would be the best way to prepare these Partions. I would use GParted Live CD to create the Partition in advance, that everything is the way I like it. But I'm not sure if this works without problems for the 100 MB system restore partition (lasts time I got 2 100 MB partitions)

2) I want to move the Users data to a separate partition and found this guides: User Profiles - Create and Move During Windows 7 Installation [2]=User%20Accounts User Folders - Change Default Location(Don't know which one I chose to do so till now) But I see in Windows 7 there are much more useless directories in the users home directory:I've already learned the new Library system, but I still want to use the Users directory. But there is a great mess. Is there a useful/possible way to prevent the directory to mess up with all the sub directories, often created by some apps, don't really using the directory. Or are you just ignore the users home directory? Usually I got about 5 to 8 sub-directories in each Directory for a tidy system to find everything and have a good ordered system.

View 8 Replies View Related

Can't View Certain Images On Some Websites

Nov 2, 2012

It got to the point where I restored my computer to factory settings. Everything worked until I used Windows Update. However, I just uninstalled them and tried and I couldn't view them this time so now I'm not sure if it really is because of Windows Update. I have yet to install an anti-virus as it was literally just yesterday I did this, so I know it's not an issue with an anti-virus. I cannot view any product images from the sites katespade.com, luckybrand.com, and claires.com. (was trying to do a little Christmas shopping, ha!) I noticed all of them have a zoom + and - feature.

View 10 Replies View Related

Why Can't View Usb Directory In DOS Windows 7

Apr 21, 2011

I'm trying to create a portable Ubuntu machine on a USB drive. Unzip/installation instructions I have require command line inputs to do this. when it comes to DOS but am pretty familiar with Linux command line - at any rate I don't know how to change directory in DOS to view the USB directory. Stuff I've tried ("J" is the drive of my USB):

cd c:
cd c:Windows (and users)
cd J:
CHDIR J:
CHDIR J:

View 2 Replies View Related

View Icons As Images Within Folders?

Aug 4, 2011

Something seems to have changed because it used to open as icons and "fill" as images. whether small, or large it always filled in with an icon of the exact image.

View 2 Replies View Related

Getting Image Viewer To View Multiple Images At Once?

Dec 4, 2011

I'm looking for a simple image viewer program that will let me view images on my computer at once. I would like the program to be able to let me open up multiple images in seperate windows at once and to have unobtrusive menu bars. I have been out of the loop with Windows for a while and the last time I used Windows at home I used Quicktime Pictureviewer for viewing images.

View 9 Replies View Related

Set Large Images As Defult Setting When Browsing For Images?

Sep 12, 2011

Using an image posting website and I've recently updated to windows 7. I used to be able to have my images come up as thumbnails without having to Right Click > View > Large Icons everytime. Also I used to have filmstrip option.here's where prob isUploaded with ImageShack.usevery time i go to upload a picture it comes up as a list.Now when I explore the folder via Desktop > b > Girls the images come up as thumbnails as i've set it for all folders already. How can I set it for when I'm in IE and uploading?

View 1 Replies View Related

Make All The Files In Directory A Have The Same Date Created/modified Attributes As Directory B?

Oct 25, 2011

One directory (Directory A) containing the same files as Directory B but with the wrong Date created / modified attributes.how to make all the files in Directory A have the same date created/modified attributes as Directory B.

View 7 Replies View Related

Replace Files In Multiple Directory, From A Single Directory?

Jan 14, 2011

I have a 10 files that have all been categorised into about 40 folders. These files have been damaged.I have a backup of all these files, but they are not categorised and sit in a single directory.Does anyone know of an easy technique to batch replace the damaged files with the originals?

View 2 Replies View Related

Two Larger Directories Into One?

May 21, 2012

I need a solution that can take two given directories, take random files from each and create a new, smaller directory.For example Directory "Photos 2011" has 500 pictures in it and "Photos 2012" has 200 pictures.I would like the program to randomly choose files from each directory and create a directory of those random files into another directory.

View 9 Replies View Related

In Certain Directories File Seem To Disappear

Sep 28, 2010

Running Windows 7 and in certain directories file seem to disappear. Most of the disappeared are pdfs or web pages. Though the files do not show up in Windows Explorer, if I try to restore the files by copying from my back-up drive, it tells me they already exist. Also, if I start Adobe Reader and try to open files in the supposedly empty directory, all of the missing pdfs show up.

View 4 Replies View Related

Migrating Windows System Directories

Apr 25, 2012

I have been thinking about getting a SATA controler card and a few SSD for my system. I have been looking around for something on this topic and thus far have not found anything talking about it or it is talking about moveing the entire disk.What I want to do is migrate system directories to seperate drives, with the existing install. So it would look like this [code] That is what I want my table to look like, I want to know is it possible with out having to perform a reinstall. Also would I have to assign each drive a new drive letter or would I be able to do NTSF directory mounting after I migrate to the new drive?The way I was thinking about it was, if I added the drives to the system, with drive letters, make a copy of the directory contents, then remove the drive letter and set it up as a mounted directory to a NTSF drive, that may allow me to do it. Then I would have to figure out what to do with the old data to get it off.

View 2 Replies View Related

Windows 7 Backup And Junction Directories?

Jan 25, 2012

I have a C:Users *directory junction* mapped to D:Users. I used the following to achieve this: "mklink /J C:Users D:Users".if I do a *system image*, will my files on D:Users be backed up? Or should I config another separate *file backup* (not system image) job especially for D:Users?In case D:Users gets backed up, when I restore it will my files be placed in C:Users ou D:Users?

View 1 Replies View Related

Moving Default User Directories

Aug 11, 2011

I was moving the default storage directories from c:users... to the root of D: when I fubared with the desktop one.I pointed it at the root of D: instead of D:Desktop and now I have everything in D:oot on my desktop.

View 3 Replies View Related

Adding Directories To Path Failure?

May 1, 2011

How do you actually add directories to path? Every tutorial I've come across just says tack the path on to the end of the PATH variable after the previous variable's semicolon. That doesn't work. For instance if I want to add a path B:MinGWin I would just add it to the system variable PATH like soand now anything in the bin directory of MinGW should be in the path. Why doesn't this work? It still pulling the "this is not an internal or external command" nonsense on me. I've also tried adding directories on the C drive to path and ended with the same results.

View 2 Replies View Related

Can't Access Directories, Control Panel

Oct 1, 2011

got a new computer about a month ago and immediately installed Avast as anti-virus. Also have been using Peerblock. Haven't visited any sketchy websites or opened any suspicious e-mails/programs as far as I remember. Last night, I noticed my network icon in the bottom right showed a red "X" even though I am still able to use the internet. I then noticed I would get an error whenever I tried to click the icon to access my directories under explorer or access the control panel. The error message in each instance is "Windows cannot access the specified device path or file. You may not have the appropiate permission to access the item."I am the only user on the computer so am the Administrator. I have 2 Harddrives, both have Windows 7 64-bit installed, the primary being a solid-state drive, and the other being a conventional HD. I ran a full Avast check which didn't find much, just 1 sketchy mp3 I've had for a long time on one of my external HDs (I have 2 connected total) which didn't solve the problem. Also downloaded and ran Spybot S&D which found 2 things but correcting those didn't solve problem. I've rebooted several times and nothing has changed in terms of my access.Also, sometimes when I'm trying to install something it'll say that Windows Installer is messed up and I can't even seem to replace that via the files I tried to download off microsoft's website.I haven't tried booting from my conventional internal HD but I'm afraid that'll get corrupted too so I'm hesitant to yet.

View 3 Replies View Related

Safe To Delete Directories After Upgrade ?

Dec 1, 2009

Upgraded Vista to 7. Have 2 directories on the C: drive ($INPACE.~TR and $WINDOWS.~Q) that weren't there before upgrade. Are these old Vista data and do I need them?

View 2 Replies View Related

Transferring Directories My Docs / My Music From Drive C To D

Oct 6, 2010

I have had to do a fresh installation due to the hd failing. I now have a larger hd partitioned into 2, one (C for the OS and programs and the other (D for the data). Is is possible and advisable to transfer all the directories such as "My Docs" and "My Music" from drive C; to drive D:? If it is OK then how can I do it.

View 5 Replies View Related

Explorer Very Slow On Some Directories To Display Contents?

Feb 15, 2012

I have a newish PC with an crucial ssd on C: and a WDC Black on D: but for some reason when I open some directories in explorer on D: it takes ages to display the contents, upto 30secs in some cases. And thats for a directory with only 150 items. I can see the green bar in the address bar filling up whilst I`m waiting for it to display

View 8 Replies View Related

Determine The Cumulative Size Of All Files In All Directories?

May 7, 2012

I'm in file explorer. I'm clicked on the parent directory of a large number of subdirectories that include a large number of assorted files.

Is there a way to determine the cumulative size of all files in all directories below the current parent?

View 4 Replies View Related

Photo Screensaver Doesn't Include Sub-directories

Sep 28, 2009

For some reason, I cannot get the photo screen saver to include sub directories. I select either my pictures folder, or my pictures library, and in both cases, it only seems to poll those pictures in the root of pictures, as well as sample pictures.. None of the other folders in the pictures folder get polled... Any suggestions?

Also.. for some reason, the screen saver does not start when it should. I can preview it from the screen saver configuration screen, but it doesn't start on it's own after the allotted time....

View 7 Replies View Related

Move Users And Program Files Directories?

Oct 14, 2010

My computer has a 60Gb SATA2 Solid State Drive which I am installing the OS and I have 2 640Gb SATA3 hard drives, one of which I want to use for both users, program files and program files (x86).I have read and tried many different approaches and I would prefer using a 'symlink' to achieve this rather than any registry hacks, as I have read that a symlink has fewer side effects.

View 4 Replies View Related

Long Loading Time For Directories On Network

Feb 6, 2010

I have problem with my windows 7. When i try to open a directory on LAN, every now and then it begins to reload the directory. The upper bar begins to fill up with green color (in my theme of course), and it takes very long time, like 3, or 4 minutes. In the directory there is not much stuff, maybe 200 or 300 text files. And during this 3 or 4 minutes, the computer is almost blocked.

It is very slow, the browser can not connect to any site on internet, any programs that are working stalls, or becomes very slow. When the directory is loaded, things return to normal. And what is more, this problem does not occur with every directory on the LAN, only with some of them.
What can be the reason and how can I fix it?

View 1 Replies View Related

Moving C Drive Directories And Files After Re-installing?

Jan 6, 2013

I've just re-installed Windows 7 64bit and am moving some files onto my "Programs and Data" hard drive. With the previous install I have moved a number of the Win 7 files onto the this HDD, and I want to do the same now. Since that drive now contains my previous copies of the these directories and files, and I want to keep them, how can I merge the contents. Is it as simple as copying what new content I want from the C drive, changing the location of the USER files in Windows to the HDD, then deleting what is on the C drive?

View 7 Replies View Related

Reset The Homegroup To Stop Showing Erased Directories?

Oct 18, 2011

I have noticed that if someone on the homegroup erases a directory, that directory keeps showing up in the homegroup listings on the rest of

View 7 Replies View Related

Windows 7 AMD64 Directories Deleted By Driver Sweeper

Dec 31, 2010

A few months ago I've been having problems with my graphic card (MSI R5850 Twin Frozr II 1GB) and PC as it was having BSOD's 24/7. When I was using driver sweeper for my graphic drivers, I think it deleted a directory or two too far. Sorted it out by cleanly installing on a old HDD, and then moving the directories he listed and its files over. Any info about these directories/folders have files in them, what they are called, And if possible can they be moved from one PC to another (e.g. from a friends)? Or are they directories only relative to the persons PC?

View 9 Replies View Related

Search Tool Not Working In Shared Network Directories

Jan 13, 2012

The search engine does not work on network directories.

View 1 Replies View Related

Error When Installing Usig Answer File To Move User Directories?

Dec 28, 2012

I am trying to use this example file I found on microsoft's site[CODE]

View 1 Replies View Related

How To Change Default View To "List" From "Details" View

Aug 30, 2011

discovered a way to change the Windows 7 file and folder view to "List" view instead of the default Win 7 "Details" view?In WinXP, you simply went to Folder Options dialog box >> "View" tab and it allowed you to change the view for an entire drive with one click. Win 7 does not do this.much prefer "List" view, but the only way to change it is folder-by-folder which becomes aggravating after several dozen folder changes.Plus, once you have changed the file view inside of a folder to "List" view... if you change the folder name, every file and folder, no matter how deep, inside that re-named folder will return to "Details" view.hat a PITA...I have Googled this and searched for some time, but have come up with no answer, I thought I might ask the folks at Tom's and see what we come up with.

View 5 Replies View Related

Not Loading Web Images In IE9 & FF5

Jul 11, 2011

HP Pavillion DV6 laptop running Windows 7.

Problem: Internet Explorer 9 and also Firefox 5 do not load web images. Strangely though, Google Chrome seems to work. Attached you will find some screen captures. I think both were done before the browsers were updated. So far, I've updated the browsers to the newest version, and updated java to 6.26.

firefox.png   154.49K 13 downloads IE.png   135.1K 13 downloads

View 9 Replies View Related

Can ONLY Burn OS Images To USB

Aug 6, 2012

I have been trying to make my USB drive bootable with this ISO with several programs for quite awhilenow. method that i can use to make this NON iso image bootable? Or atleast figure out what kinda of boot file its using (such as linux, windows, etc) so i can configure the best program i've found so far? Its called YUMI - Multiboot USB Creator. It has the ability to be able to boot several types of ISO images ranging from Linux Ubuntu, Windows, Hirens Boot CD, to HP Automatic Firmware update, even Acronis! and more.plus its free! how to figure out which type of boot to choose by browsing contents after mounting the image and then configure this program with the proper settings. I did find something that said Windows, but its a folder. Not only that but as I've said I've tried several different USB to DVD tools, all of them windows and none of them worked.

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved