Every time I turn off my computer, it says do not turn off ,or unplug your machine. Installing 1 of 2 updates. It does this every time. And when I turn on my computer it says. Configuring windows updates. This take awhile to do. I don't think I would have updates evertime I start up. I have an HP-Windows 7-64 bite.
View 1 RepliesI don't know why but,everytime i logging off,the windows always start update and some of my file in my computer got corrupt here are the example: i previously installed an Alienware theme and patched my computer,so the theme can work fine: im using Windows 7 Home Premium 32-bit
View 1 Replies View RelatedFollowing the windows updates this wed, my pc wouldn't even start from a system restore.It was maybe heading that way as it was taking 20 minutes to boot up - despite 8 Gb RAM to help it along.I think one of the problems may be that it has never seemed top do many restore pointsd and there was only one choice for before the updates but even that didnt work. Now setting about the hours of work working out how to restore files from Livedrive.First thing I notice - can't set the time to 24 hour clock (12 hr clock irritates m,e). Despite going into setting and chhoosing the capital HH for hours it still stays as 12 hour clock.
View 6 Replies View RelatedI'm running Windows XP 7 on a HP EliteBook 8440p laptopI installed three updates, including the latest Windows 7 Service Pack and now my computer will not start up again. The Startup Repair tool is detecting no errors. The system restore tool warns me that my diagnostic power is low and a restore can not be reversed. I ran a chk dsk and no errors were found and fixed there either.
View 8 Replies View Relatedbrand new toshiba windows 7 home premium after installing updates it shuts down and wont turn back on will not indicate any battery charging or any lights it just dies
View 4 Replies View RelatedJust finished installing Win 7 64 bit on my Dell Inspiron 1545. It appeared the update was going along smoothly until it came time to reboot. After rebooting, the laptop showed that it was configuring Windows. Once the configuration was completed the system went into Startup Repair. Once completed and checking the Repair Details it shows a message indicating that ci.dll is corrupt. I was able to restore the computer to original state, but once I downloaded the 80 or so win 7 updates, I get the same problem.
View 2 Replies View RelatedFor the past day windows wants to install the same 4 updates over and over, I have windows update set to download and let me choose when to install.
I can't understand why I even need them, as I uninstalled net framework. Notice how the update at 8:17 AM., KB2656368, is the same as one of the 4 updates installed at 7:47 PM. Windows wants to install the same four kb files again.How do I stop this?
Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2656368)
Installation date: 6/15/2012 7:47 PM
Installation status: Successful
[Code].....
I managed to add a wireless network profile to my IBM lenovo T400 laptop which runs on Win 7 OS. However I am not able to see it listed in the list that apperas when I click on the wireless transmission icon on the bottom right of the screen.
I can confirm that the 'wireless radio' button in the said laptop is turned on and is able to see other wireless networks in the vicinity. I can also confirm that the particular wireless network is actually functioning as I am able to access it from my Win XP machine.
In the WinXP machine, my security type is 'WPA2-PSK', I am not able to find the same option in the Win 7 machine, so I selected WPA2-Personal. I also tried playing the with the other 'Security Type' options in the Win 7 machine, but nothing solves the problem.
I noticed this a few days after having to restore my drive from a True Image backup.Running Win 7 Professional.I currently have 5 "recent" programs listed in my Start Menu (not pinned). I have Properties set to show 15 recent programs. When I run a program from the Start Menu (not the "recent programs," but the full list) or from Explorer (navigate to program and double-click the exe file), the program does not get added to the list. The only recently run programs being added are ones I run from Desktop shortcuts. I know this is not normal behavior; my laptop, also running Win 7 Professional, adds recent programs regardless of how they're launched.
View 1 Replies View RelatedI down loaded an Mp3 music track the other day and on playing it through my WMP I noticed that someone had added a message about someones's blog! It's a couple of lines of text which I don't want.
View 5 Replies View Relatedi was looking in my programmes and features and i noticed a this added value package i was wondering what it is and do i need it or can i delete?
View 3 Replies View RelatedI have a HP1315 printer which is shared on an XP box on our home network. I've added the printer but nothing prints - it spools and disappears. Printer works fine from the XP machines on the network therefore assume it's something related to my Windows 7 installation
View 9 Replies View RelatedIs there a way to turn off the added eye candy in 7, I would rather have stuff pop up rather then fade in.
View 6 Replies View Relatedy motherboard Asus P8Z77-V LX can handle up to 32 GB of DDR3 1600mhz.I did do a "memtest" on all of my 16GB DDR3 1600mhz, 10 passes, 10 hours and no errors. I had my original 4 GB still in the computer as I had to remove the other ram to install Windows 7. Once windows was installed I ran it with just the 4 GB for a few days to make sure everything was working which it was. So I then re-installed the remaining 12 GB of ram and then right away windows explorer kept crashing. I removed the 12GB I just put in and reinstalled each stick separately with the original 4 GB so each time there was 8 GB of ram installed with no problems at all.So what gives ???Is there a default setting somewhere that is limiting my memory?
View 9 Replies View RelatedI'm adding a third disk to my PC and am unable to get to a point where Win 7 recognizes the hardware with a drive letter. The Device Mgr says there are three hard drives attached and the Storage Controller tab recognizes the Marvel 91XX chipset and says the driver for the Sata III Ports is installed.
View 3 Replies View RelatedI've just setup an HTPC (Windows 7 Professional 32bit) and am using WMC on Windows 7. I've run into a problem that lots and lots of people have had (can see lots of posts on the web) but not fixes seem to work and I've trolled for two days now finding no fixes for the problem.Perhaps someone can assist?Problem: When I add a shared folder from my SAN (which I can access from Windows Explorer), WMC says scanning for files but never finds any. I have a collection of AVI files on the SAN and am wanting to list them in the Movie library on WMC (not the Video Library).I've heard it's a file association problem but that does not seem to fix the problem. I've changed the association of AVIs from WMP to WMC.Any idea what the real fix is?Question: What's the best practice to put a collection of AVIs on the WMC. If you have 10 movies, what's best?1. Create a folder called Movies and under that folder, 10 additional folders for Movie1, Movie2, etc and under those folders the actual AVI files, or,
View 2 Replies View RelatedI managed to add a wireless network profile to my IBM lenovo T400 laptop which runs on Win 7 OS. However I am not able to see it listed in the list that appears when I click on the wireless transmission icon on the bottom right of the screen. I can confirm that the 'wireless radio' button in the said laptop is turned on and is able to see other wireless networks in the vicinity. I can also confirm that the particular wireless network is actually functioning as I am able to access it from my Win XP machine. In the WinXP machine, my security type is 'WPA2-PSK', I am not able to find the same option in the Win 7 machine, so I selected WPA2-Personal. I also tried playing the with the other 'Security Type' options in the Win 7 machine, but nothing solves the problem.
View 1 Replies View RelatedI have a linksys router which I never secured with a password. I was able to use it with no issues until I added a password. The router works fine, I've connected my phone , Xbox, and laptop with no issues. My upstairs computer in the other hand I can not connect. It asks for my password and does not connect. It also asks for network authentication.
View 1 Replies View RelatedShe decided to add some 6000 fonts to the system by dropping them in the font folder. I come to realize this when i notice the entire system intermittently freezing & running slow as molasses. Suspecting the obvious (and in an attempt to spare myself hours of sifting through fonts!) I figured i could simply delete all of the fonts and the system would retain the required ones (like they would on a mac)...
View 1 Replies View RelatedI'm having some problems running a USB hardlock key over a Windows XP Mode virtual machine.
If I select the hardlock from the list of devices, it works ok and the app that uses the hardlock works great.
But if I try to run the application from the Start menu of the host system (Windows 7) as Windows XP Mode, the application does not detect the USB Hardlock key (though windows 7 does).
As far as I have worked through it, it would work if I could just manage somehow that when running a virtual machine, the USB hardlock key was loaded automatically. I don't need that USB hardlock key for any Windows 7 application.
Any idea?
I'm being forced into an upgrade because my last machine was getting old and slow and was infested with viruses.
One of my guys is recommending setting up a non-admin user account for the every day use of the laptop so that any undetected Trojans don't have admin rights if they embed themselves. Do you guys think this is even worth it? Or is simply keeping UAC turned ON, will be enough with an admin account?
Laptop
Win 7 64 Home
HP Fingerprint reader
my login has suddenly added a secondary user with the same name as my account and when i click onto this other user it leads to my account this second user account also ahs the same name and seems to be a copy?
View 20 Replies View RelatedI have 5 updates that fail to install. I have also tried to manually install them, but they still fail Here are the updates:
KB2586448
KB2572076
KB2564958
KB2567053
KB2579686
The error code I get is "800736B3". I ran MS FIXIT and it said they did not detect any problems.
I'm not certain if this has anything to do with Windows, or my motherboard, or overloading my system, or whatever. But I could use some input.
I built my current system in the summer of 2009. I tried to "futureproof" as much as I could by putting in a Corei7 processor (the low-end, 2.66 Ghz one), an Intel 80 GB SSD boot drive, a 10,000 RPM WD Velociraptor secondary drive, 12 GB of DDR3 1666Mhz RAM which I later learned my Gigabyte GA EX58-UD5 Motherboard DID NOT want to run natively any faster than 1333 Mhz, a 2GB DDR5 ATI 4870 Sapphire video card, and a BD-write drive I already had I'd installed in a prior system, as well as a DVD-writer and a card reader/writer with additional built-in USB ports and an E-SATA port.
This particular motherboard came with 10 SATA 2 ports and 10 USB ports (not to mention more I got with the Coolermaster Haf 937 case I used and that card reader, plus a couple firewire ports (I LIKE lots of connectivity). I never used all my SATA2 ports, although quite a few were hooked up, what with the connections for the case and card reader (which has since bit the dust)...
Anyway, a year or two later, after SATA 3 and USB came out, Newegg had 600GB WD Velociraptor SATA3 drives on sale for LESS than I'd paid for my 300 GB SATA 2 drive, and since I largely used external drives for a lot of my storage, and those were becoming available in USB 3, I found an ASUS card (U3S6 -- PCI-E 4) that had two internal SATA 3 connectors and two external USB3 connectors, and away I went. (I also added an additional internal SATA 2 7200 Hitachi 2 TB drive as a primary file storage drive at that time, with the first SATA 3 external a 2 TB SATA 3 to use as backup.) Those drives all show up FINE when I boot up, but often after a few hours, or a day or two, they'll just "disappear" from my list of drives. I find this QUITE disconcerting, as the 80GB Intel SSD has proven too small, what with the 14 GB WinSXS is now taking up, and I just ordered a 256 GB SSD that comes with Acronis True Image from Newegg to clone it to -- and of course it's SATA3. As I didn't have any more SATA 3 slots left, I also ordered another SATA 3 card. The ONLY slot I had left was a PCI-E -1 slot, which it appears that card is designed for, but as this new drive will be my BOOT drive, with Windows and all my PROGRAMS running off it, I certainly don't need the system "losing IT" in the middle of a session! (Note, the SATA 2 Hitachi drive NEVER fails to show up. Neither do the 300 GB Velociraptor nor the 80 GB Intel SSD, which are all on the built-in SATA 2 BUS).
I've considered replacing this motherboard, as it's had some issues (BOTH of the two gigabit ethernet connections that came with it petered out, and I had to buy an add-on card to get my gigabit ethernet back (one WASTED PCI slot)! However, I've yet to find ANY other motherboards that have anywhere NEAR the connectivity this Gigabyte board came with. Or is that the problem? Did Gigabyte overload this board?
The other day I thought to update the BIOS on the board, and although it took two reboots, I haven't "lost" any of those drives since (been on, or in "Sleep" mode ever since), so maybe it needed a BIOS update. I also went into the BIOS "Intelligent Tweaker" and toned down any settings that warned might create an unstable system (I was already pretty conservative with those, but I went a bit more conservative).
App takes a long time to load and generally runs slow when in use. As far as I know it was designed for Vista 64 bit. BTW the cmd "cscript adplus.vbs -crash -nodumponfirst -minionsecond -quiet -pn dpeg.exe" needed to be changed to "cscript adplus_old.vbs -crash -nodumponfirst -minionsecond -quiet -pn dpeg.exe".
View 5 Replies View RelatedI created a folder on my desktop and add images of books I have sold almost daily. With Windows XP, the images would stay in order as I added them, but with Windows 7 they are always in order of the image name. I have tried using the different sort by date options, but they are always sorted by the image name (which is a 5 digit number). How can I sort them by the date I add them to the folder?
View 3 Replies View RelatedI recently replaced my boot drive and just got everythign up and running. I had removed my backup drive while I replaced the boot drive so that I could us it on another computer.
Now when I add the 2nd hard drive back to my computer I get a message saying something like "can not load os" right after the bios screen comes up and before Windows begins to load. If I unplug the second drive the computer will boot just fine.
If I access the boot menu and select my boot drive the computer will boot and my second drive will work just fine. I do not have to enter the boot menu and select the boot drive on every startup?
I currently have the following network configuration:- Broadband Cable Modem (in my den) - Router (in my den) - Computer (in my den) - Wireless Access Point (family room)My broadband cable modem is connected to my router via ethernet cable. I also have an Ethernet cable running from the back of my router directly into my PC. My current setup is in my den (I will explain). In my family room (which is away from the den) I have my television and several other wireless devices (Roku box, etc). My signal strength is low in my family room due to many walls between my den and family room. I therefore installed a Wireless Access Point in my family room by running an Ethernet cable into my basement and connecting the router in the den to the Wireless Access Point in my family room. Now here is my question: I set the SSID (or network name) of the Access Point so that it is the same as my current network name (that way I see the AP on the network). Now here is where I need to understand how a wireless Access Point works. If I have a laptop or other wireless device in my family room and search for a wireless signal, am I connecting to my router (that has a weaker wireless signal than the AP) or to my Access Point (stronger because my Access Point is a foot away from my wireless devices) since they both have the same network name? And if I connect at that strong signal and walk into another room where the signal is weaker, does my laptop automatically connect to the wireless router? How do I tell if both my router an wireless Access Point are using the same SSID or network name. I guess what I'm trying to ask is where am I getting my wireless signal from, the Access Point or the Router or both (assume I am in wireless mode).
View 4 Replies View RelatedI just added a password to my home network. But now that I have a password I cant connect without the ehternet cable. All other devices ie T.V, desktop upstairs, ps3 and xbox and smart phones can connect wirelessly. The only device that wont let me connect wirelessly is the laptop that I used to set up the passkey. Furthermore when connecting to the network on the other devices it doesnt ask for the password.
View 1 Replies View RelatedI am always manipulation files between several folders so I have several iterations of Windows Explorer open when my computer boots up and showing the contents of the folders that I manipulate all the time. Using XP files moved or copied into another folder always appeared at the bottom of the explorer window and that was good because although they were out of alphabetical order I always knew where to find the new files in the explorer window. They would stay at the bottom until I clicked 'Refresh' or changed the focus to another folder or shut down that explorer. Windows 7 explorer behaves differently and places new files in alphabetical order. Is there a way it can be changed so that new files show at the bottom of the explorer window?
View 2 Replies View RelatedSo, I was having problems with my .dat file type icon, and in frustration trying to get rid of the icon and start all over again, I deleted the file type in the registry. Will this cause problems in the future, even though I re-added it in the registry? I don't see any problems with them right now, but I didn't know if I might have troubles in the future due to this.
View 1 Replies View Related