Unable To Read CD-R
Jan 15, 2013I am unable to read CD-R on Word 2010 using Windows 7. When I insert a CD I either get the message Internet Not Responding or the screen fades out and I have to exit because it won't do anything.
View 2 RepliesI am unable to read CD-R on Word 2010 using Windows 7. When I insert a CD I either get the message Internet Not Responding or the screen fades out and I have to exit because it won't do anything.
View 2 RepliesSo I turned my computer off last night, everything was working fine. Then when I woke up today, I turned it on and BAM, could no longer read my SSD (Vertex 2) and would get a message telling me to insert my windows install disk.So I decided to humour it, and tried putting the disk in, checked the recovery options and was unable to find the SSD to perform recovery on. I carried on a few more steps to install a fresh copy and it wasn't listed there either.
I spent about a hour fiddling around with the hardware, swapping around wires and harddrives to check if it was the wires messing me about, turns out everything worked fine.I then reset my BIOS and then checked the boot settings, but my SSD wasn't even displayed on the list.So I was stumped.On the POST screen, when the SSD was not plugged in, nothing would show up in that slot, however when the SSD is plugged in it says 'None'(SSD currently plugged into C1 Master)
I have 3 External Hard Disk Drives (HDDs) and my PC is only able to read one out of the three -- I also tested slotting in 3 USB flash drives and all three are able to be read. Strange thing is, I tried the same 3 External HDDs in another PC and all three are able to be read.
If any, here: With unreadable HDD With readable HDD
win 7 64 bit I have suddenly not been no able to read vbs files...I have re-registered both windows and java script via an elevated command and both are said to be running - succeeded But when I then run a vbs script which I know to be 'good' ...using open with and choosing Microsoft base script host I get message as per picture.
View 2 Replies View RelatedI am unable to read my messages. and also messages have been deleted without my requesting that?
View 2 Replies View Relatedmy wife just purchased a new computer with windows 7. I know that outlook express is no longer there. She is trying to read old email in folders and cannot without opening the folder and then opening each email. Are there any free programs that will work...or does she have to purchase outlook??
View 2 Replies View RelatedI use Adobe Lightroom 4 to manage my photos. I had to reload my photos the other day. Today I was making changes in the data in my photos, when I finshed and saved the data I recevied a message that the photo was Read Only. Inless I get this resolved I will not be able to edit any of my prints.
View 4 Replies View RelatedRecently i have changed the permissions of a folder (not to make it used by the users of the system),due to some problem with OS i reinstalled the OS,then recognised that i have changed the permissions to the folder and with the admin rights of the new OS i am unable to read the files in the folder.
View 1 Replies View RelatedI could not open my e-mail attachments
View 3 Replies View RelatedFrom what I can see, this seems to be a fairly common problem across computers...My Dell Inspiron n5010 (Windows 7 Home Premium 64bit) sporadically won't read DVDs. A couple of nights ago, it took a couple of tries - last night, I couldn't get it play one at all.Having looked for various fixes, I have tried the following:-Updating drivers-Disabling and re-enabling the drive in device manager-Going into the registry to remove recommended entries (high/low filters i think? I only had the "high" option, which apparently means that fix isn't for me...)-Uninstalling any DVD-burning software that may be interfering with my laptop's own DVD player/software.
View 8 Replies View RelatedI installed TACO (anti-tracking addon) in Firefox.My menus and bookmarks became too small too read. Sometimes they would become normal or too large but moving the mouse/keyboard made it just too WAY too small.I did a bunch of stuff recommended by Mozilla to fix but in the end I uninstalled FF including all personal data and reinstalled. Same problem.
View 9 Replies View Related1. there's a folder in my seagate 1tb goflex external hard disk, which am unable to delete. wen i checked the properties it showed that the space occupied by the folder is 1.5PB!!!! its ridiculous n strange at the same time! if i try to open the folder it says "you need to format disk before you can use it".2. every time i try to copy some files onto/from my hard disk it says "can't read from source file or disk". i have some valuable data worth 700GB on my hard disk and am unable to transfer em onto any other device so i can format my hard disk.
View 2 Replies View RelatedOriginally got message - Disk read error occurred press ctl alt del to restart. Then tried plugging this drive using a USB connector into my desktop PC to see if I could run some chkdsk. Then my desktop PC displayed messages telling me my firewall and virus software had been turned off and the computer crashed. ROOTKIT? So I was left with 2 drives not working. I re installed windows on desktop but using ISO on flash drive BUT can't on the 500GB Hitachi HTS545050B9SA00 for some reason. Windows setup loaded and Deleted old partitions and formatted. When I tried to install, it froze. It now just boots up with a windows loading screen and I'm also unable to boot from flash drive as it freezes. This is on a Sony Vaio VPCEB4E4E.
View 2 Replies View Relatedchange it to read and write mode, and also to remove write procted in it.
View 1 Replies View RelatedWhat's the best type of DVD to use for read-only and read/write applications? I'm a little out-of-date on this, haven't bought any in awhile. I remember things like DVD-R/RW and DVD+RW and such. I have a new machine running Win7, and an older laptop running XP.
View 10 Replies View RelatedMy DVD drive suddenly stopped reading Movie DVDs. If I load data CD and data DVD it reads successfully. But when I load redbox or netflix dvd it does not read atall.
I tried changing the registry entries as described in this forum but no effect. I am stuck. Tried re-installing the device driver too but no effect. Still the same.
my dvd writer reads cds but not DVDs in windows 7
View 2 Replies View RelatedTLDR: I get the "A disk read error occurred" error but the system disk is readable and checks OK in the recovery USB. So, I have two hard drives--a terabyte drive with some data on it and a smaller drive with the Windows 7 installation on it--and a USB drive. I made the USB drive into a recovery USB using the instructions here Installing Windows 7 System Recovery into USB Flash Drive | Raymond.CC Blog with the addendum found in the comments. I made a system image of the smaller drive via the control panel and then put the image in the terabyte drive. I then replaced my smaller hard drive with a new drive of a comparable size.In order to restore the drive, I booted into the recovery USB, formatted the new hard drive with ntfs, made it active, and ran wbadmin start recovery -version:xxx -items:C: -itemtype:Volume -backupTarget:C: -recoveryTarget: where C was the terabyte drive and D is the new drive. I may have the drives mixed up here, but I assure you I had them correct when I actually ran the command
After a reset, I got some generic error so I went back into the bios, and set the new drive to be at the top of all boot lists, and then rebooted. It was at this time I got the above error. I feared that my drive was actually DOA, so I booted back into the recovery. I did a D:;dir and saw that all of my old files did indeed exist, so I figure it was a boot issue. I ran the boot repair utility in the recovery menu and it said there were no errors and I should restart. I didn't restart, and instead ran a chkdsk D: /f and found no errors. I did a bootsect /nt60 /all /mbr and restarted and still nothing changed. I even tried a "bcdedit /timeout 10" and I do not see the boot loader before getting this error. Not sure if that is expected or not but I'll throw that in here.
my laptop can't read cd or vcd disk but dvd disk can read and write
View 3 Replies View Relatedi have new flopy drive when i m formatting its showing the error that windows is unable to format the drive
View 1 Replies View RelatedI have an ASUS N51Vf on which I just changed a defective hard drive with a new one, same size and specs as the old.After a clean windows 7 install all was working fine. I created a System Restore Point. No errors reported, restore point created.I then tried to restore all my data and settings with a back up I had on a external hard drive.This back up has been made with LaCie Genie Back up Assistant, a program with decent review online.After having finished to restore the back up, I was asked to restart windows, which I did. Windows restarted but then it failed to log in giving an error (which appears to be quite common googling it). A window pop up saying "Interactive logon process initialization has failed. Please consult the event log for more details."If you say ok the windows keeps appearing again and again.There was no way to access windows whatever mode (safe, normal and all the other boot option appearing when pressing f8) I choosed. Startup repair was as well ineffective (since there was no problem in the startup process itself.)
People online reported the only way to fix this was to check the event log files on another computer. So I installed Ubuntu on the unallocated space I left when installing win 7, I copied the logs files, I went through all the errors in the event viewer of another computer, particularly those in application.evtx, I copied safe version of winlogon.exe logonUI.exe and userInit.exe on windows/system32 through Ubuntu but nothing worked. Same error preventing log in.I then went into the System Restore Point nasty affair. As I previously mentioned, I created this point prior to restore the LaCie backup. The Restore point was there, accessible through the standard recovery options. What appears is this: standard final window of System Restore and I couldn't select any of this drive and proceed.So I go to the Command Prompt and I realize that windows has been installed on D:, not on C:, which appears to be the system reserved partition with 70Mb free. Something standard when you install Windows 7 apparently. Since my backup was made copying files from C: and I didn't care for the path when restoring my LaCie backup, I thought I messed up things attempting to copy to the wrong drive, even though no error was reported to me.So I formatted everything, reinstalled windows paying attention not to create other partitions. Clean install, all went through fine. I check on Computer what's the windows unit label, and it is C indeed. I didn't check for the presence of other partitions. I re-restore files from the LaCie Backup. At the end I try to create a new System Restore point, but a weird error tells me that I can't. Already suspicious, I restart, to find myself on the exact same position as before, unable to login, unable to restore (both same as previously described) and, moreover, checking through command prompt, win 7 appears to be in the D: unit again with the C: set up to be the system reserved!!
CD room cannot read CD but is reading dvd.
View 5 Replies View RelatedWe are running a small network with a NAS and networked PC's. The PC's are all running Windows 7 Ultimate. One PC will open files already open by others and does not notify that the file is in use. This user enters information into the file, saves and closes.When the original user (accessing the file first, sometimes adds information) saves and closes the file, the changes from the second user are lost.
View 1 Replies View Relatedi had a friend install windows 7 for me, now my cd rom won't be read by my computer. how do i fix this? i tryed updating, and going on the manufactorers site with no help at all. i have a compaq presario. and how can i speed it up again.
View 2 Replies View RelatedI put in WD MYBOOKLIVE which is a network drive and I got a Blue screen. I also get it if I put in a Logitech webcam which I really need.WD tech support said the drive has nothing to do with the Blue screen. I triedt o read the DMP file by putting it into WORD but that didn't work.
View 1 Replies View RelatedIs there any way to read a Mac file without an extension? I received a few files from a Mac friend, but cannot read them.
View 4 Replies View Relatedmy laptop driving me mad problem is it boots up ok but i did a defrag on it and it gone all pear shaped now when i try and get on internet explorer 7 it at starts loding up fine then it just goes back to my mad screen saver and says cli.exe 0x7c9109d8 referenced memory 0x00000001 could not be read.
ive tried run msconfig and unclicked ati catalyst but nothing seems to happen and some times when i try to load other applications up i get the cli.exe error on screen can someone put me in right direction im not very good with computer and fixing them.
I have been trying to follow the instructions at this site: How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on Windows 7 but can't get sfcdetails.txt to show up in Notepad - even though I think I am following the instructions precisely.
View 2 Replies View Relatedfor some reason i cant read my aol messages when i sign on aol by fire fox mosilla.
View 2 Replies View RelatedI'm not sure if this is a virus, but it happened after I restored my computer. All my folders in my Local Disk became "Read-Only", and from what I know its suppose to have a check mark instead of a square box.
View 9 Replies View RelatedI got an asc file, can open it in Flash cs5,but the text is only gibberish.How can I read the real content?
View 2 Replies View Related