I put in WD MYBOOKLIVE which is a network drive and I got a Blue screen. I also get it if I put in a Logitech webcam which I really need.WD tech support said the drive has nothing to do with the Blue screen. I triedt o read the DMP file by putting it into WORD but that didn't work.
View 1 RepliesI have a dmp file,
View 2 Replies View RelatedI used to have XP as my O/S and scanned a lot of files. The scanned files have an extension .max
Since I switched to Windows 7 I cannot read ( open ) them anymore.Searching Google provided no What I am looking for is a program that let's me read the .max files.
I have Windows 7 Home Premium x64. I want to change a DAT file to read-only, but every time I try to I get two error messages. The first one says something about needing the administrator, and that's weird because I am the administrator, and the second message goes on to say "an error has occurred...ignore, ignore all etc. I even tried to change the file in safe mode but that didn't work. I noticed that the file is set to open with Media Player Classic, for some reason, and that's it
View 4 Replies View RelatedFor what ever reason, I have a file on my 1TB WDC drive:
D:usersuser_namedocumentsxxxxx.pdf
that upon trying to open it, I receive a message that the file is corrupt.I have looked high and low trying to find a way to DELETE this file, but to no avail. There's lot of references about running CHKDSK to check the drive, running FSUTIL to query the dirty bit (which is set on this drive, because of this file), and using CHKDSK to clear the dirty-bit. And, I tried them all. This, however, is NOT a hard drive issue. The drive is fine. It's the file structure that is in error. I just need a solution that will let me DELETE the file. I don't want recover it.
1. Use Paragon-Software Hard Disk Manager 12 to copy the hard drive to another drive. The second drive is large enough to hold all the data from the larger drive.
2. Check the file on the drive copy... (yep, it's there... yep, it's corrupt... yep, the dirty-bit is on)
3. Create a filter in Paragon-Software HDM12 for that specific file.
4. Run the disk copy again using the filter.
5. Check the file on the drive copy... (this time the file is not there and the dirty bit is not set)
Having done this, I think I'm ready to copy the hard drive back. I just haven't pulled the trigger. I want to recable the drives to use the copy just to make sure I can reach everything. Then, I'll pull the trigger.
i get this problem in few of my files in hard disk, which is Disk D, first one is Disk C, any1 have cure for this, at first i only have this error in 1 file, now in 3 files, but these files are working perfectly, just cant copy paste.
View 9 Replies View RelatedI'm trying to create a virtual "Windows 7 ENT SP1 x64" in a vhd file. I need it to be bootable. Also, I need to figure out how to implement it so that when a user reboot and/or logoff from this computer, that it restore the vhd OS to its original state (read-only). Is that even possible?
Note: I'm already able to create a normal vhd from scratch or from an existing Windows 7 system. What I can't figure out is how to make it a read-only vhd file.
Cannot read from the source file or disk?
View 3 Replies View RelatedI have been trying to find a way for Windows Vista and 7 to use the Folder.jpg file in a folder as an album artwork icon (in lieu of a folder icon with skewed and obscured artwork), and since Windows no longer natively supports this feature, the best workaround I've been able to find is to replace the folder icon manually. This creates a desktop.ini file with an absolute path to the Folder.ico file I also have in each album folder. I then changed the desktop.ini to reference a relative path, like this:[.ShellClassInfo]IconResource=Folder.ico,0Here's where my questions arise:1. When I copy that desktop.ini to another folder with a Folder.ico file, Windows doesn't read it, even after restarting the computer. I've searched the web on this and have found thread after thread where people have the same issue, but no one seems to be able to resolve it without manually changing the icon, either through the Explorer interface or using the command prompt. Is there a way I can get Windows to read the manually-copied desktop.ini of every sub-folder in my music directory?
2. On a related note, when I copy my customized folders with the relative-path desktop.ini from my Windows Vista computer to my Windows 7 computer, the artwork doesn't show up there, even for the folders I got to look right in Windows Vista. Am I going to have to manually re-associate the desktop.ini every time I upgrade computers or reinstall the OS?The album artwork looks so good, but I don't want to go through hundreds of folders and manually associate the folder to read the desktop.ini file. That would take so long, and just the few I've done manually so far have killed my wrist.
I'm trying to download a powerpoint but everytime i try it says this ppt.part could not be saved, because the source file could not be read.I don't understand why? I've tried different browsers and even different computers but this still happens, yet my friends can download it without any hassle and when they try sending me it the same thing comes up, Does it have something to do with my internet provide (Virgin) It's really annoying as i need to download powerpoint for my college work.
View 3 Replies View Relatedusing win 7 64 bit sp1 with ms office xp, just opened an XL document to update it and when I try to save it I am getting the message:
'C:Usersmy nameDesktopmfc.xls' cannot be accessed. The file may be read-only, or you may be trying to access a read only location, Or, the server the document is stored on may not be responding.
I'm trying to write a request to COM2 and capture the answer. My device is 19200 baud 8/1 non parity.Using a freeware terminal called termite I can send the hex instruction and receive the answer, as verified in HHD serial monitor.My batch file looks like this: Code: MODE COM2: baud=19200 parity=N data=8 stop=1 to=offTYPE request.txt>COM2COPY COM2 text.txt where request.txt contains my request.HHD sees the request being written, but the device does not respond.
View 9 Replies View RelatedI am currently facing this problem with both Firefox and IE --> "rar.part could not be saved, because the source file could not be read"it doesn't matter which type of files (.avi or .mkv and so on) I tried to download, but this problem keep on showing up.It happens only to my this recently bought computer and I tried it with my old computer, downloading using the same link but everything is ok......
View 3 Replies View Relatedwhile i am copying files from my hard disc to my pc, it is showing "can't read from the source file or disc.
View 3 Replies View RelatedMy wife and I have Windows 7 on each of our computers. I thought I installed networking between the two computers. I am able to look at files from each of our computers. However, we I open a file in one of the computers it will not let me save the updated file. The error message says the file is read only. Any ideas?
View 1 Replies View RelatedAll my browsers were freezing and crashing. I was getting the DNS 1012 error. I found out I was missing my host file. I added back the host file. Chrome and Internet explorer worked ok for a little while, then they started crashing again. I took off Chrome and replaced with Opera. Opera worked perfectly for a day and I thought my troubles were over. The next day, it started freezing and crashing and I am getting the DNS 1012 error again. If it's not recognizing the host file, why did Opera work so well for that one day. Also I noticed when I go to my embarqmail account, that's when the freezing really begins and then it affects other sites I go to after that.
View 1 Replies View Related1. there's a folder in my seagate 1tb goflex external hard disk, which am unable to delete. wen i checked the properties it showed that the space occupied by the folder is 1.5PB!!!! its ridiculous n strange at the same time! if i try to open the folder it says "you need to format disk before you can use it".2. every time i try to copy some files onto/from my hard disk it says "can't read from source file or disk". i have some valuable data worth 700GB on my hard disk and am unable to transfer em onto any other device so i can format my hard disk.
View 2 Replies View RelatedUpgraded my PC to a windows 7 64bit professional.However, I'm unable to read a xml file generated by accounting software (ACCPAC) stored in my windows NT 2003 server.Error message: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
View 1 Replies View Relatedchange it to read and write mode, and also to remove write procted in it.
View 1 Replies View RelatedWhat's the best type of DVD to use for read-only and read/write applications? I'm a little out-of-date on this, haven't bought any in awhile. I remember things like DVD-R/RW and DVD+RW and such. I have a new machine running Win7, and an older laptop running XP.
View 10 Replies View Relatedmy dvd writer reads cds but not DVDs in windows 7
View 2 Replies View RelatedTLDR: I get the "A disk read error occurred" error but the system disk is readable and checks OK in the recovery USB. So, I have two hard drives--a terabyte drive with some data on it and a smaller drive with the Windows 7 installation on it--and a USB drive. I made the USB drive into a recovery USB using the instructions here Installing Windows 7 System Recovery into USB Flash Drive | Raymond.CC Blog with the addendum found in the comments. I made a system image of the smaller drive via the control panel and then put the image in the terabyte drive. I then replaced my smaller hard drive with a new drive of a comparable size.In order to restore the drive, I booted into the recovery USB, formatted the new hard drive with ntfs, made it active, and ran wbadmin start recovery -version:xxx -items:C: -itemtype:Volume -backupTarget:C: -recoveryTarget: where C was the terabyte drive and D is the new drive. I may have the drives mixed up here, but I assure you I had them correct when I actually ran the command
After a reset, I got some generic error so I went back into the bios, and set the new drive to be at the top of all boot lists, and then rebooted. It was at this time I got the above error. I feared that my drive was actually DOA, so I booted back into the recovery. I did a D:;dir and saw that all of my old files did indeed exist, so I figure it was a boot issue. I ran the boot repair utility in the recovery menu and it said there were no errors and I should restart. I didn't restart, and instead ran a chkdsk D: /f and found no errors. I did a bootsect /nt60 /all /mbr and restarted and still nothing changed. I even tried a "bcdedit /timeout 10" and I do not see the boot loader before getting this error. Not sure if that is expected or not but I'll throw that in here.
my laptop can't read cd or vcd disk but dvd disk can read and write
View 3 Replies View Relatedwhenever I open docx file there is hidden file ~$name of file.docx created. which type of file is that? Is it in virus, maleware. for example If I open house.docx file then ~$house.docx file created which is hidden form. I had saw this file when i select show all hidden file option. when i try to open ~$house.docx file it show message the file is corrupted and cannot be open.
View 1 Replies View RelatedI installed Win 7 and if i try to open my computer of click on desktop and open up screen resolution etc. I get "Explorer.exe -Windows cannot access the specified device, path or file. You may not have the appropriate permissions to access the item." I did a search but could not find anything related to this error in Win 7. I have found some others attached to Win XP but have to do with the installation of some software which prevents access to explorer.exe. When I boot in safe mode this issue does not appear...
View 9 Replies View RelatedAfter doing a copy and paste, we have, on 3 occasions so far, found the copied data in an entirely different file. Twice data from a copy appeared in an excel spreadsheet and once a picture copied in facebook appeared in an email. The excel problem is very worrysome as it is our family budget. how this could happen? In the case of the excel events no paste operation was intentionally done.
View 5 Replies View RelatedHow to create a batch file that will move files based on the file type?My Requirement : I need a batch file to copy all .doc files in all my HardDisk to aremovable disk say (Z: drive) . Can anyone make it possible using a batch file
View 4 Replies View RelatedCD room cannot read CD but is reading dvd.
View 5 Replies View RelatedCan I sort the recycle bin on file extensions so I can easily find a file?
View 3 Replies View RelatedHow to force Windows 7 File Explorer to display ALL audio folder content as normal files in detailed view with file name/size/date and without title/artist/album.
View 1 Replies View RelatedWas using old veersion of Calendar Creator. I deleted it before installing new version. Now I get this message and it won't open
View 1 Replies View Related