Get Windows 7 To Read Copied Desktop.ini File?

Mar 17, 2012

I have been trying to find a way for Windows Vista and 7 to use the Folder.jpg file in a folder as an album artwork icon (in lieu of a folder icon with skewed and obscured artwork), and since Windows no longer natively supports this feature, the best workaround I've been able to find is to replace the folder icon manually. This creates a desktop.ini file with an absolute path to the Folder.ico file I also have in each album folder. I then changed the desktop.ini to reference a relative path, like this:[.ShellClassInfo]IconResource=Folder.ico,0Here's where my questions arise:1. When I copy that desktop.ini to another folder with a Folder.ico file, Windows doesn't read it, even after restarting the computer. I've searched the web on this and have found thread after thread where people have the same issue, but no one seems to be able to resolve it without manually changing the icon, either through the Explorer interface or using the command prompt. Is there a way I can get Windows to read the manually-copied desktop.ini of every sub-folder in my music directory?

2. On a related note, when I copy my customized folders with the relative-path desktop.ini from my Windows Vista computer to my Windows 7 computer, the artwork doesn't show up there, even for the folders I got to look right in Windows Vista. Am I going to have to manually re-associate the desktop.ini every time I upgrade computers or reinstall the OS?The album artwork looks so good, but I don't want to go through hundreds of folders and manually associate the folder to read the desktop.ini file. That would take so long, and just the few I've done manually so far have killed my wrist.

View 4 Replies


ADVERTISEMENT

DVD Drive Can Not Read Copied Cds

Nov 25, 2012

my dvd drive can not read copied cds?

View 6 Replies View Related

Windows 7 Clobbers File-names Copied To A NAS Drive?

Aug 22, 2010

My setup: Windows 7 Pro (locale: Polish) and a NAS drive (D-Link DNS-323) attached via a router. Just recently upgraded from XP to 7. The NAS drive reports an NTFS partition.The problem I've just discovered: when copying files to the NAS drive, if a filename contains certain characters, such as curly quotes, angle quotes, bullet characters, subscript characters, em-dash etc., only the short 8.3 filename gets copied to the NAS drive.(I would not sweat it if the troublesome characters just got dropped, but what happens is that meaningful filenames are replaced with gibberish as above.)I use the NAS drive as a backup/mirror location for the local drives, so this is a big issue, since my backups are now severely clobbered. I discovered the problem while testing my backup regime, then found out the filename change occurs no matter how the files are copied - whether it's the backup application, a file manager or just Windows Explorer.And (of course) the problem did not occur when I was running XP, and nothing on the NAS drive changed since I installed 7 a week ago. Files that were previously copied onto the NAS drive (under XP) still show up fine, which tells me that 7 is actively interfering with the copy operations.

View 2 Replies View Related

Windows 7 - File Not Copied To Removable Disk / Access Denied

Nov 24, 2012

I saved my music and other files into local disk d. When I copy the file from this disc to removable disc, there is one comment will appear like your access is denied.

View 1 Replies View Related

Desktop Can Be Copied To New Profile?

Feb 7, 2012

if my current desktop - not just the picture but also the shortcuts and files on there- can be copied to a new profile? If so, how do I do this and have the programs work? Currently just have a new profile but haven't copied any of my files to it yet. Been having admin issues with the existing profile like not being able to do certain deletes, thumbnails not all showing. etc.

View 3 Replies View Related

Copied Files Icons Missing On Desktop?

Nov 25, 2012

I have recently been using some .bat tools to speed up searches in root directories.The tools search for the files in a list.txt, and copy them to a new folder which appears on my desktop. It has been working, until I used a new version today.It copied the files correctly, but I could not see the new folder appear on the desktop. I searched for it and found it where it should be, C:UsersEvanDesktopWhy does this folder exist, but not appear visually on my desktop? is it an error in my.bat file or something else

View 2 Replies View Related

Pasting A Copied File Into System 32?

Oct 20, 2011

I just want to apologize in advance for this dumb question and if this is not the right place to post this or if this is something too random to help me with (I'll be honest with you, I'm not going to use my newfound knowledge for a good cause; I'm trying to hack into my dad's password-protected admin account from my limited account because the parental controls he set up on my account won't even let me save any pictures. I think it's ridiculous.) but I figured it was worth a shot. The title is pretty self-explanatory...I just need to know how to paste this certain executive file I copied into the System 32 panel. Let's hope this works so I can finally download Skype without the constant inquiring of my dad's admin password!

View 1 Replies View Related

Copied Flash To Harddrive, And Cannot Save Edited File In Folder?

Oct 27, 2011

I have Windows 7.i copy entire flash drive to a folder (Call it "RemovableDrive" folder under My Document) from flash drive (USB).In "RemovableDrive", folder, I right click and select Properties, then I uncheck READ ONLY, and select Apply to set all files and folder/subfolders to uncheck READ ONLY.

In the "RemovableDrive" folder, I opened a file, and edit it. Then I try to save it.it would not let me. I also set the property of the file to READ ONLY, but still has the same problem.

View 9 Replies View Related

Windows 7 Desktop Can't Read Laptop

Jan 23, 2013

Both machines are Windows 7 64 bit. I have set all network settings exactly the same. I have turned off Zone Alarm on the laptop. I have set set sharing on drives and folders to Everyone. While the desktop can see the laptop over the home network, when I try to access files, I get the "enter username password" dialog box, which seems to have no function (at least to me).

View 4 Replies View Related

How To Read A .max File In Windows 7

Dec 1, 2012

I used to have XP as my O/S and scanned a lot of files. The scanned files have an extension .max

Since I switched to Windows 7 I cannot read ( open ) them anymore.Searching Google provided no What I am looking for is a program that let's me read the .max files.

View 2 Replies View Related

Windows 7 Ent SP1 X64 VHD - How To Create A Read-only VHD File

May 30, 2012

I'm trying to create a virtual "Windows 7 ENT SP1 x64" in a vhd file. I need it to be bootable. Also, I need to figure out how to implement it so that when a user reboot and/or logoff from this computer, that it restore the vhd OS to its original state (read-only). Is that even possible?

Note: I'm already able to create a normal vhd from scratch or from an existing Windows 7 system. What I can't figure out is how to make it a read-only vhd file.

View 2 Replies View Related

.VHD File Copied From Bad 1.5 TB Drive, Can Restore To 1TB Drive

Sep 20, 2012

I was lucky to grab a recent image backup from a failing 1.5 TB drive. Can I restore it to a smaller drive if the available space on the original drive was well below 1TB?This is the first time ive had to work with this particular image file. I have restored from backups before, just not this type of image.

View 9 Replies View Related

Can't Read The DMP File

Sep 9, 2012

I put in WD MYBOOKLIVE which is a network drive and I got a Blue screen. I also get it if I put in a Logitech webcam which I really need.WD tech support said the drive has nothing to do with the Blue screen. I triedt o read the DMP file by putting it into WORD but that didn't work.

View 1 Replies View Related

How To Read Dmp File

Jul 3, 2011

I have a dmp file,

View 2 Replies View Related

Read A Xml File Generated By Accounting Software (ACCPAC) Stored In Windows NT 2003 Server?

Jan 19, 2012

Upgraded my PC to a windows 7 64bit professional.However, I'm unable to read a xml file generated by accounting software (ACCPAC) stored in my windows NT 2003 server.Error message: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

View 1 Replies View Related

Cannot Read Hdd From Old Desktop Windows 7 32bit On New Laptop Windows 7 64bit

May 28, 2012

I have a new Toshiba Laptop (Windows 7 64bit CORE i3). I would like to run (via usb) and old hdd from my desktop which was 32bit Windows 7. I have the old hard drive in a SATA enclosure and running it via USB to my laptop. When I attempt to either copy or read the old hard drive I get a write protect error. I have tried the MS registry changes to remove "write protection" but the registry entry they call for is non existent in my laptop registry. My last post on this was annotated as solved...but my explanation was weak. I do not want to run this drive as a permanent addition to my system, I just need to copy some files from the old drive to the new one. If I attempt to use Control Panel/Disk Management it tells me the old drive is not "initialized". Both options to initialize don't work. I have some very important medical records that must be copied from old hdd to new.

View 4 Replies View Related

How To Make .DAT File Read-only

Feb 18, 2011

I have Windows 7 Home Premium x64. I want to change a DAT file to read-only, but every time I try to I get two error messages. The first one says something about needing the administrator, and that's weird because I am the administrator, and the second message goes on to say "an error has occurred...ignore, ignore all etc. I even tried to change the file in safe mode but that didn't work. I noticed that the file is set to open with Media Player Classic, for some reason, and that's it

View 4 Replies View Related

Cannot Read Corrupt File

May 16, 2012

For what ever reason, I have a file on my 1TB WDC drive:

D:usersuser_namedocumentsxxxxx.pdf

that upon trying to open it, I receive a message that the file is corrupt.I have looked high and low trying to find a way to DELETE this file, but to no avail. There's lot of references about running CHKDSK to check the drive, running FSUTIL to query the dirty bit (which is set on this drive, because of this file), and using CHKDSK to clear the dirty-bit. And, I tried them all. This, however, is NOT a hard drive issue. The drive is fine. It's the file structure that is in error. I just need a solution that will let me DELETE the file. I don't want recover it.

1. Use Paragon-Software Hard Disk Manager 12 to copy the hard drive to another drive. The second drive is large enough to hold all the data from the larger drive.

2. Check the file on the drive copy... (yep, it's there... yep, it's corrupt... yep, the dirty-bit is on)

3. Create a filter in Paragon-Software HDM12 for that specific file.

4. Run the disk copy again using the filter.

5. Check the file on the drive copy... (this time the file is not there and the dirty bit is not set)

Having done this, I think I'm ready to copy the hard drive back. I just haven't pulled the trigger. I want to recable the drives to use the copy just to make sure I can reach everything. Then, I'll pull the trigger.

View 6 Replies View Related

Can't Read From The Source File Or Disk

Dec 16, 2010

i get this problem in few of my files in hard disk, which is Disk D, first one is Disk C, any1 have cure for this, at first i only have this error in 1 file, now in 3 files, but these files are working perfectly, just cant copy paste.

View 9 Replies View Related

Cannot Read From The Source File Or Disk?

Feb 28, 2011

Cannot read from the source file or disk?

View 3 Replies View Related

Ppt.part Could Not Be Saved, Because The Source File Could Not Be Read?

Feb 21, 2011

I'm trying to download a powerpoint but everytime i try it says this ppt.part could not be saved, because the source file could not be read.I don't understand why? I've tried different browsers and even different computers but this still happens, yet my friends can download it without any hassle and when they try sending me it the same thing comes up, Does it have something to do with my internet provide (Virgin) It's really annoying as i need to download powerpoint for my college work.

View 3 Replies View Related

C:Usersmy NameDesktopmfc.xls' Cannot Be Accessed. The File May Be Read-only

Sep 10, 2012

using win 7 64 bit sp1 with ms office xp, just opened an XL document to update it and when I try to save it I am getting the message:
'C:Usersmy nameDesktopmfc.xls' cannot be accessed. The file may be read-only, or you may be trying to access a read only location, Or, the server the document is stored on may not be responding.

View 3 Replies View Related

Serial Read/write In Batch File?

Sep 30, 2012

I'm trying to write a request to COM2 and capture the answer. My device is 19200 baud 8/1 non parity.Using a freeware terminal called termite I can send the hex instruction and receive the answer, as verified in HHD serial monitor.My batch file looks like this: Code: MODE COM2: baud=19200 parity=N data=8 stop=1 to=offTYPE request.txt>COM2COPY COM2 text.txt where request.txt contains my request.HHD sees the request being written, but the device does not respond.

View 9 Replies View Related

Rar.part Could Not Be Saved, Because The Source File Could Not Be Read

Sep 4, 2011

I am currently facing this problem with both Firefox and IE --> "rar.part could not be saved, because the source file could not be read"it doesn't matter which type of files (.avi or .mkv and so on) I tried to download, but this problem keep on showing up.It happens only to my this recently bought computer and I tried it with my old computer, downloading using the same link but everything is ok......

View 3 Replies View Related

Can't Drag And Drop Any Icon On Desktop Also File To Desktop

Feb 8, 2012

Few days ago i am able to drag and drop any icon on desktop also file to desktop,but next morning i start my laptop i was unable to drag and drop any icon on desktop also file to desktop.I tried many method but all failed.

i using WIN 7 home premium X64bit HP 431 intel core i5 2gb ram also my setting in desktop/view/auto arrange is off in context menu the drag and drop setting is on

View 2 Replies View Related

How To Solve While Copying Can't Read From Source File Or Disc

Nov 1, 2011

while i am copying files from my hard disc to my pc, it is showing "can't read from the source file or disc.

View 3 Replies View Related

Cannot Save Or Update Network File - Error Read Only

Nov 23, 2009

My wife and I have Windows 7 on each of our computers. I thought I installed networking between the two computers. I am able to look at files from each of our computers. However, we I open a file in one of the computers it will not let me save the updated file. The error message says the file is read only. Any ideas?

View 1 Replies View Related

Put File On Desktop -> Open File -> Access Denied?

Feb 25, 2011

Whenever i take a file and put it onto the my desktop, all the permissions to the file is completely stripped. Leaving none able to open the file.I am able to go into access control and add myself again, but it makes no sense at all..

View 9 Replies View Related

Browsers Work For Awhile Then Freeze, Host File Is Read Then It's Not?

Feb 2, 2012

All my browsers were freezing and crashing. I was getting the DNS 1012 error. I found out I was missing my host file. I added back the host file. Chrome and Internet explorer worked ok for a little while, then they started crashing again. I took off Chrome and replaced with Opera. Opera worked perfectly for a day and I thought my troubles were over. The next day, it started freezing and crashing and I am getting the DNS 1012 error again. If it's not recognizing the host file, why did Opera work so well for that one day. Also I noticed when I go to my embarqmail account, that's when the freezing really begins and then it affects other sites I go to after that.

View 1 Replies View Related

Unable To Delete Folder And Can't Read From Source File Or Disk?

Jul 10, 2012

1. there's a folder in my seagate 1tb goflex external hard disk, which am unable to delete. wen i checked the properties it showed that the space occupied by the folder is 1.5PB!!!! its ridiculous n strange at the same time! if i try to open the folder it says "you need to format disk before you can use it".2. every time i try to copy some files onto/from my hard disk it says "can't read from source file or disk". i have some valuable data worth 700GB on my hard disk and am unable to transfer em onto any other device so i can format my hard disk.

View 2 Replies View Related

Windows 7 Showing Is Copied And Not Genuine

Aug 6, 2011

the windows7 is copy and is not genuine

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved