Screen Goes Black / PC Fans Stop Spinning / My Power Button Is Still Bright Blue
Feb 17, 2012
Lately my PC has been weird, whenever i launch any game my computer just turns off but in a verry unusual way, The Screen goes black, the pc fans stop spinning, nothing is working, but my power button is still bright blue (showing that the pc is still on but its not), i press the button, nothing happens and if i un-plug the power cable, the power button stays on for about 10 seconds, then when i plug the power cable back in the pc turns on just normally like every time, but i still get crash if i launch a game, this is my pc Configuration: [code] This has been happening for a couple months now and its getting verry annoying, i'm thinking of buying a gaming PC but that costs 3,000 and i need a good working PC while i save up money.I have reinstalled Windows a few weeks after the problem accoured, it did not fix it. I also updated all my drivers, still not working...
I am seriously at my limit spent 3 days I still cant figure it out, done probably 100 reboots. Contacted ASUS Support they are useless still in contact with them in troubleshooting this matter.
This is my issue.
When I hit the Power Button my screen goes black, before a bios revision it would just reboot my computer. YES I have set Power Options, Power Button to shut down computer.
I noticed I am missing a Sleep Button Action as its not in my menus. Maybe this could be a leading reason why this is happening? Anyone know how to get this option to show up?
I have used another computer cases front panel and same issue occurs so it cannot be my front panel.
I have a gut feeling the OS ACPI is completely being ignored when it comes to what the Power Button should do, if I set it to Sleep/Hibernate/Shut Down SAME thing still occurs.
I have got the Power Button to work successfully maybe 8 times out of the 100. It actually Logged off, Saved Settings and Turned of Computer as what I am trying to get it to do.
I have reinstalled the ACPI driver from ASUS but nothing changed. Have the latest BIOS Revision as well. I have removed battery and cleared CMOS as well. Also loaded default BIOS settings.
My System: HAF 922 Phenom II 955 M4A79XTD EVO AM3 G Skill Ripjaws DDR3 1600 750GB WD Black Cavier 1TB Green Cavier 320GB Cavier
Logitech Illuminated Keyboard (Maybe can use ACPI I think dont know if it can conflict?)
Weird thing, guy at ASUS told me to set it to "S1 Only" in BIOS and it actually worked twice, third time I hit the power button it went back to same behavior.
I noticed my chances are higher for it to turn off properly when the power options advanced settings window is open for some reason.
I just cleaned my laptop and it released a lot of dust, so my temperature is lower. The weather is currently very, very, very hot and my laptop is running 55-60C normally when i browse the internet, in a very hot room. Before i cleaned it - it was very hotter. I'm even sweating and i don't wear a shirt. But that's not the point. I i am running prime95 to test the processor, and after 1 minute of 100% usage it gets to 90C in the hot room again. But when i go to a clearly cold room, it doesn't turn off, it barely reaches 80-85C but never the maximum 90C.are the fans not spinning correctly or is the room temperature really important for a laptop?
Have a Packard Bell imedia A3622 with windows 7. Have a black screen after turning on but fans running. On/off switch just flashing. Earlier it came onto a screen asking me to select method for turning on but then this goes to black screen. What to do next ?
my computer turns ON, but makes less noise than it used to when working, and just shows a black screen...doesn't even enter bios.Recent changes: Ok, I installed a new Graphics card, radeon hd 5450, installed the drivers etc, got it working perfectly. Then a short while after I also downloaded a reputable program called watt 2.2.5 to clear my windows non genuine message.Then shortly after both, I was changing my theme, and the computer screen just went blank. Even keyboard wasn't working (I was pressing "caps" to see if caps light would come on and it didn't). So I powered off, now I just keep getting black screen!
the screen glitches with pink, white, and green tiles and lines, the cursor disappears, the screen goes black, and the hard drive stops spinning. All the lights on the front of the computer stay on, the fans stay on, and the monitor doesn't say anything about not receiving a signal. The first time it happened I tried turning it on right away and it booted up and let me sign in, but as it was loading the desktop and icons it glitched again, and froze. after I shut down and let it sit for a while it worked just fine until the next day when it did the same thing again, but twice in one day and with a shorter time between freezes. Today I had a WerFault.exe error pop up and when I clicked ok on it the bottom half of my screen turned pinkish and the computer froze when I restarted the pink tone was still there but it did not show up on any windows that I opened and when the background changed it went away.
I want to know if i can remove the power button from the bottom of the welcome/locked screen as my lovely 2 year old keeps turning my PC off it its lock or on the welcome screen, I have a lockable door on my PC case so he can't get at that power button so this is the only thing we can think is its the power button on the welcome screen.
my dell vostro1510,screen is lock and one button is blinking in blue light at the top.i tryed evrything ,pressing menu button,fuction key etc.plz tell me the exact way to unlock my screen
Problem :I can not log on windows with power button.So, for the detail :
1. When i turn on my PC (use power button)
2. It's on then go to dual boot menu then I press enter on windows 7
3. Then, the normal boot appear (windows logo with "starting windows" text)
4. After that, the screen goes blank, just black screen without cursor
my vga and ram is ok, I already use the latest driver for my vga card I can start my win xp normally (my dual boot is win 7 and win xp) I can start my win 7 with safe mode and low resolution I also can start my win 7 normally after I force restart my PC with reset button?
Problem :I can not log on windows with power button.So, for the detail :
1. When i turn on my PC (use power button)
2. It's on then go to dual boot menu then I press enter on windows 7
3. Then, the normal boot appear (windows logo with "starting windows" text)
4. After that, the screen goes blank, just black screen without cursor my vga and ram is ok, I already use the latest driver for my vga card I can start my win xp normally (my dual boot is win 7 and win xp)I can start my win 7 with safe mode and low resolution I also can start my win 7 normally after I force restart my PC with reset button?
2 days ago after I closed off my laptop lid, my laptop went into hibernation mode. After that, the laptop is having some trouble trying to wake up. I remembered I saw an error message saying something like "Windows has failed to wake up from hibernation". So I have no other choices but to restart. Ever since then, I start to get an error.
I can't get into Windows. Everytime I try, I will be presented with the blue screen of death. I tried booting in safe mode but in vain. I will get stucked at Classpnp.sys[URL]. I am using Windows 7 64 bit, Core i7, 8GB Ram, 2GB Graphics
I've been intermittently getting blue screens with the stop error 0x00000124, which the internet told me is either a driver or hardware issue. I've run memtest for 5 passes on both sticks of RAM and there were no errors. I do overclock my CPU, but my system is water cooled and the temp is always stable. In addition when not overclocked I still will get a blue screen sometimes. Here are my specs.
OS - Windows 7 x64 Windows 7 (Custom Build) Not OEM 1-2 years old 1 year. I re-install Windows every so often for tidiness.
CPU: Intel i7 2600k Video Card: EVGA Nvidia GTX 570 Super Overclocked Motherboard: Intel Gigabyte Z68X-UD3H-B3 Power Supply: Antec TruePower Quattro 850W
The zip with the jcgriff2 report is too big for the upload limit. So I uploaded it here: [URL]
Last night my husband used his acer laptop successfully. Today when he went to use it the browser was open as usual to the yahoo home page. He hit the refresh button and the screen went black and the spinning circle is all that shows. He tried rebooting it and again nothing happens.
I have got an HTPC/Server that has a lot of hard drives in it. The OS is run off a SSD and of all the hard drives, the one that really gets used is 1.5TB WD drive for recording of the television.
I have set Windows up so it turns off hard disks off after 20 minutes if they are not being used which is fine, but my problem is that my computer automatically goes into Sleep Mode (S3 hybrid sleep) when it is not recording anything and when it wakes up all the hard drives spin back up.
Is there any way to keep hard drives spun down even when resuming from sleep?
Yea, said my pc was troubled... a very clean cut gentleman he was, plain blue suit with a little name tag in the upper left hand corner i believe his agent code name was
Code: STOP: c0000221 Unknown Hard Error SystemRootSystem32
tdll.dll He gave me the option of taking a dose of Startup Repair, which he recommended, or to just try things normally and maybe it would work. I chose to take the dose.
It was scary at first i admit... at first i was told that this could take up to an hour to fix and take affect, even restarting my system a few times possibly.
All in all to my delightment, the dose took less than a minute to take affect and fix my blues...... well, so far atleast
I have a new Windows 7 laptop. I want to have the dual boot with XP. I'm using the following link to set dual boot: Dual Boot Installation with Windows 7 and XP. I have XP CD & I'm now trying to install XP first, to be able to use Method-1 (When XP is Installed First)
But once it reaches installing XP, I get the Blue Screen: STOP 0000007B 0xF78D2524, 0xC0000034, 0x00000000, 0x00000000
I never installed or used Win-7. I scanned with KIS2011 & it reported no infections. [URL]. There is only 1 HDD with C: having factory default Windows 7 installed. There are no other partitions.
I'm using Alienware desktop with ATI Radeon 5900 graphic Card I have problem though whenever I play World of Warcraft game not always but a lot of times I get a blue screen error but before the blue screen error I get disconnected from the game then It tells me that my display adapter stopped working somehow..I don't know why then the blue screen of death appears and my pc get restarted I have this problem for 3 months now
So I keep getting the blue screen Power State Failure which I am sure you are all aware of. It's happening a lot to me, and it really needs to go away it's causing my computer to be incredibly slow.
My computer was turned off during the update process and I am getting the blue screen. After launching the start-up repair I am told the problem cannot be solved although there is a patch preventing the system from starting. My registry files precede the date the problem occurred, I have tried to restore but there is no restore point, I cannot start in safe mode. I have launched bootrec.exe and ran FixMbrFixBoot and also RebuildBcd and none have worked. I know I will probably have to go the long way around and pull the data from my disc and do a clean install but just wondered if any of you Techsperts had a quicker fix so I can spend the rest of my life in awe at your magnificence?
I have had this labtop since december and this morning the power button and caps lock button comes on but screen is black... the caps lock button is flashing!! Wifi button is also on just nothing is coming up on screen at all!! I do not understand!! I have unplugged it and powered off and on several times
This has been going on for a couple weeks now, not sure what it is.I'm not very experienced with computers, but I did manage to run and do all the tasking prepared on the main thread to give the information needed.I keep blue-screening, at least twice a week during small minimal tasks such as AIM and firefox usage.[CODE]I recently got the computer from a friend, so I'm not sure on the actual specs myself but I do know it's Windows Ultimate 32-bit.
I believe this problem was caused by CCleaner/Revouninstaller, that's the only thing that did changes to my system before this happens. I tried searching for solutions on Google, and I found this guy with the exact same problem.(url) (Screenshot provided by him, perhaps this can help better understand my problem) Tried System Repair/Restore and Safe Mode, none worked. I followed up with a " Last known good config " option, but the problem is still there.
I am getting spinning blue circle next to cursor even though I am not using it it comes and goes most of the time even though I am not using cursor or action anything. I am using windows 7.
I've has thisl issue with a Compaq Presario cq56-115dx black screen at power on,everything else seems to power up, caps light blinks showing what it could be that's not working as noted above on hp's support link however this model of laptop/notebook will not make a beeping sound, never did when the monitor would power up correctly. I installed ssd new mobo still black screen replaced ram,checked connection ac/dc you name it still black screen no Compaq logo nada. I contacted hp no reply. HP no warranty and no assistance policy. I'm think its lg LCD/monitor not sure if customer overheated unit, no spills where found inside reply
I just installed windows 7. I am the only user of this computer, and have disabled the need to enter a password. But I want to get rid of the blue background with my picture, which needs to be clicked on to resume, every time my screen goes black (which happens if I don't use the computer for a few minutes, don't know what does this). Why should I have this blue screen and need to click my picture if I am the only possible user? I did delete an account with some funny name that I did not create, but I can not delete the administrator and guest accounts. When I have to click my picture, it is the only picture.
I have 2 samsung22 monitors hooked up to a 8800gtx running on windows7 64bit. The problem I've had ever since going to windows7 is 1 monitor works, the other just black screen with power on. I've gone into nvidia control panel and also through windows and it shows both monitors present but I noticed one monitor is attached through an analog cable but both are hooked up with the dvi cables. Could my card have a bad port?
when I plug in monitor 2 in the r/s dvi port it shows the right side desktop portion of the extended view and when I switch to monitor 1 on the right side dvi port it shows the left side desktop view but nothing comes up when attached to the left side dvi port. I've taken a snap shot of my desktop and it shows both screens. I've tried older drivers as far back to 170's and nothing worked.
Went to use my laptop this morning (windows, 15 inch screen) and all I could get on the screen was several large black circles with the screen being a very light blue, like maybe sky blue. I can see the screen flickering, but nothing appears in the screen whatsoever.
