Screen Went Black On Hitting Refresh Button In Browser
Apr 21, 2012
Last night my husband used his acer laptop successfully. Today when he went to use it the browser was open as usual to the yahoo home page. He hit the refresh button and the screen went black and the spinning circle is all that shows. He tried rebooting it and again nothing happens.
My computer has been acting like an idiot the last months, freezing a lot, sometimes resulting in a BSOD.
Notable programs that seems to initiate these freezes are Google Chrome and something as silly as pushing the start menu button and searching for something.
I am seriously at my limit spent 3 days I still cant figure it out, done probably 100 reboots. Contacted ASUS Support they are useless still in contact with them in troubleshooting this matter.
This is my issue.
When I hit the Power Button my screen goes black, before a bios revision it would just reboot my computer. YES I have set Power Options, Power Button to shut down computer.
I noticed I am missing a Sleep Button Action as its not in my menus. Maybe this could be a leading reason why this is happening? Anyone know how to get this option to show up?
I have used another computer cases front panel and same issue occurs so it cannot be my front panel.
I have a gut feeling the OS ACPI is completely being ignored when it comes to what the Power Button should do, if I set it to Sleep/Hibernate/Shut Down SAME thing still occurs.
I have got the Power Button to work successfully maybe 8 times out of the 100. It actually Logged off, Saved Settings and Turned of Computer as what I am trying to get it to do.
I have reinstalled the ACPI driver from ASUS but nothing changed. Have the latest BIOS Revision as well. I have removed battery and cleared CMOS as well. Also loaded default BIOS settings.
My System: HAF 922 Phenom II 955 M4A79XTD EVO AM3 G Skill Ripjaws DDR3 1600 750GB WD Black Cavier 1TB Green Cavier 320GB Cavier
Logitech Illuminated Keyboard (Maybe can use ACPI I think dont know if it can conflict?)
Weird thing, guy at ASUS told me to set it to "S1 Only" in BIOS and it actually worked twice, third time I hit the power button it went back to same behavior.
I noticed my chances are higher for it to turn off properly when the power options advanced settings window is open for some reason.
I believe this problem was caused by CCleaner/Revouninstaller, that's the only thing that did changes to my system before this happens. I tried searching for solutions on Google, and I found this guy with the exact same problem.(url) (Screenshot provided by him, perhaps this can help better understand my problem) Tried System Repair/Restore and Safe Mode, none worked. I followed up with a " Last known good config " option, but the problem is still there.
Lately my PC has been weird, whenever i launch any game my computer just turns off but in a verry unusual way, The Screen goes black, the pc fans stop spinning, nothing is working, but my power button is still bright blue (showing that the pc is still on but its not), i press the button, nothing happens and if i un-plug the power cable, the power button stays on for about 10 seconds, then when i plug the power cable back in the pc turns on just normally like every time, but i still get crash if i launch a game, this is my pc Configuration: [code] This has been happening for a couple months now and its getting verry annoying, i'm thinking of buying a gaming PC but that costs 3,000 and i need a good working PC while i save up money.I have reinstalled Windows a few weeks after the problem accoured, it did not fix it. I also updated all my drivers, still not working...
For some strange reason the refresh button on Mozilla Firefox 9 (also on Explorer 8) have vanished from my computer. I can't get a reasonable answer searching,
I built up a PC a couple of months ago. It has an ok spec, Phenom II 550 x2, NVidia GTX 250, 4b ram, 500gig HD, 620w PSU. Windows 7 Eval. 7100.
From the first couple of days I noticed an issue that looked like incorrectly setup refresh rates - there are wavy lines accross the entire screen, and is particularly noticeable on highlighted text and the side edges of windows. I made sure the frame rate was correct, both in Windows and according to the GFX Card. I have tried all the settings but have settled at 75hz. This is the best setting but does not get rid of the problem.
I have the most up to date drivers for my GFX Card and Windows 7 is up to date too.
The intensity of the problem can fluctuate. Right now, its fairly minimal and only visable if you are looking. It can however get to the point where its becoming hard to read text, or at least tiring because you have to strain some more. This can happen at any time. The only link I have found is to games, as both World of Warcraft and Borderlands will intensify the isse, both ingame and in Windows. I am fairly sure they are set at the correct resolution and refresh rate where possible.
What could this be?
Further info, three weeks ago I turned the PC on in the morning to find the 'power' button unresponsive. After some waiting and several attempts it eventually turned on but I got a 'no signal' display on screen. Later I resorted to jump starting the PC without the power button, using a screwdriver to connect the prongs - after doing this, the power button has been fine although it took another day for the no signal message to go away and normal viewing return. This problem has not repeated since.
During this the fans were fluctuating a lot, audibly so. This dissapeared mostly along with the above problems, but I still think it sounds like the fans are fluctuating infrequently, particularly on initial bootup. I have no software for changing fan speeds, as far as they know they run at the speed I set physically.
A lot of this seems to point at the GFX Card, although I am a little more inclined to think it is the power supply, or the availability of power for each unit. But I really don't know. Either I can find the solution online or I take it to the shop and pay for a repair, not that its easy to even tell them what they need to repair.
The PC runs fast and with relatively few crashes besides that one weekend and this persistant display problem.
I have a 17-inch Toshiba laptop with a resolution of 1600x900 and a refresh rate of 60 Hz. However, on some backgrounds, I can clearly see my screen flickering. With the preservation of my eyes in mind, it would be greatly beneficial to know if I can increase this or not. I go here: Quote: Control PanelAppearance and PersonalizationDisplayScreen Resolution and click "Advanced Settings". Under "Monitor Settings", the pull-down bar only gives me the option of 60Hz (the "Hide modes that this monitor cannot display" is whited out). Is it possible to increase the refresh rate?
If a key is pressed down for longer than 2 secs, it apparently stops working, i.e. the display halts. If I release the key, the (apparently unprinted)characters appear at once. If I hold it down long enough, it even beeps. This happens with all the keys including backspace/arrow keys making my browsing experience miserable. (i.e hitting backspace on google box, the deletion seems to stop abruptly. But when I release it, I see multiple characters deleted at once)
This is reproduced in Firefox/Wordpad/MS-Word (At its worst in Firefox, much better in Notepad, but still there.) I rolled back to a 1 year old backup image via CloneZilla but the problem still exists. Probably its a hardware issue? (My laptop is now about 2 yrs old, it has switchable graphics, 512mb amd raedon card). Just tried it again with headphones on, it gives me a 'drrrrr-r' sound. Its even happening now as I'm typing this at a moderately fast pace.
Few days ago I caught a virus (at least I believe I did)... Used Malwarebytes and found 7 infected files in my Windows Folder. The first few syptoms of my OS was the resolution of the screen changed to 1024x768 (it should be 1920x1080) and is stuck there. The refresh rate changed from 60Hz to 59Hz, when I tried to change it back, the screen just flashes black but the tab still says 59Hz. So I reinstalled Windows 7 with the upgrade option from the OS disk, hoping to fix everything. But it didn't...
My bios was also messed up, everything was reset and edges of my screen was cutten off. The booting animation of Windows 7 is now changed to the Vista's booting animation. I reflashed the bios and that fixed that, now I've done a clean install of Windows 7, formating C: then installing. But all problems still persists... even there is no more virus found by 5 anti-virus programs. I'm still stuck in 1024x768, Windows 7 thinks my hdmi cable is apparently a dvi cable, the refresh rate is still 59Hz, the booting animation is the Vista's one.
When I opened my browser it was not on full screen. I usually just hit the maximize button to return it to it's original full screen size but now everything on the right side and bottom of my browser is hidden.
I dont know how common this problem is so i shall explain what happened first. I downloaded a .mkv file, which i saved into my downloads folder. Whenever i clicked into the folder where the file was stored my RAM automatically goes wild and hits 100% causing me to have to restart to do anything. I used to simply be able to avoid the folder and it would be fine, today i downloaded a picture and placed it also in my downloads folder. I am now experiancing the same problem whenever i so much as view the Downloads folder, even just hovering over the downloads folder without enterring is enough to make the RAM go wild.
It will not let me delete the folder containing the movie, or the picture. It simply says its busy gathering the required data to delete it and after 10 second the RAM is at 100% and its too late. My best guess is that the files are corrupt. So i ran TuneUp's Disc Doctor to scan the whole hard drive, it came back as clean, after defragging and cleaning up the registry, running virus scans and all the other features which TuneUp has i am still no closer to solving this.
I have recently upgraded my system from 2 GB to 6GB of RAM and installed Windows 7 Pro 64bit (it's not the original OS)for try and study the benefit of the 64bit platform....my hardware is 3 years old. I have update drivers, OS but I have had few BSODs and freezes..
My computer has been running slow for months, but it is now getting to the point where it is almost unbearable. For example, just clicking on a folder to open it can take up to 15 seconds to respond. It also lags a ton during internet browsing.
I want to know if i can remove the power button from the bottom of the welcome/locked screen as my lovely 2 year old keeps turning my PC off it its lock or on the welcome screen, I have a lockable door on my PC case so he can't get at that power button so this is the only thing we can think is its the power button on the welcome screen.
I have FF 17. The mouse is freezing in facebook & I find the only escape to release the browser is reboot. The same FB page works fine in internet explorer.
Upon opening the first browser window it opens to full-screen. Subsequent new browser windows open in the lower-right corner at 25% screen size.Q: is there a way to have every subsequent (i.e., after the first one) browser window open at full-screen size?
I have an acer laptop and i get a screen that says partition 3 also too. I can get to erecovery management and nothing seems to load on the left hand side do I need to wait for it to come on and if so how long does that take and how long does a partition3 take. How do I remove the password when I hit f2.
My PC boots up, loads up my desktop and all my startup programs and then my monitor goes black, sometimes it restarts immediately, sometimes my monitor will be stuck in sleep mode while my pc is still on. This has been happening a couple of weeks now. I've check all over and so far the only "solution" is to turn off the power and remove the power cable from the tower for a few minutes, this only works temporarily, the next day I power it up, it had this problem again.
The print options box appears in the upper left side of the screen. I press the print button in the box. What prints out is the print options box over the screen I wanted to print. If I drag the print options box out of the way to the right side of the screen. The print option box doesn't print, I get the screen print I requested.
My wife did something on her PC (she doesn't know exactly for sure what & can't explain it completely me), and now she can't boot up her PC. She says it had something to do with changing the security settings for a program she uses a lot so it wouldn't keep asking her if she wanted to launch it, and that's when it told her to restart the PC, then it wouldn't boot up anymore.When you reboot, the screen eventually goes to a black screen saying "Windows failed to start. A software or hardware error may be the cause" or something to that effect. It offers me the option to "Launch Startup Repair" or "Start Windows Normally".If I Launch Startup Repair, nothing much happens --- it says it's adding files, then it looks like Windows is about to boot up, then it goes to a black screen for a long time & nothing happens.
If I choose Start Windows Normally, it simply reboots & eventually brings me back to the same screen again.I've tried using rebooting and selecting ESC to get to the boot menu, then installing the Win 7 installation disc & selecting the DVD drive, then I select thelanguage, then I click Repair, but it sits there forever with nothing happening.I also tried an outside boot disc I found on the web & it doesn't launch.
i have a Dell Vostro 1520 and im running Windows 7 with a 32bit. It is only 2 years only. It started about a month ago. I was on my laptop viewing and deleting some unwanted photos i had. A few minutes later i realized that i deleted a photo that i wanted. So i went to the recycling bin and restored that photo. When i went back to my photos and went into the album, it said something like i do no have permission to access this folder. Please press continue to get full permission. I clicked continue and i got the access i should have. Now i tried many more random folders and the same thing happened. Also when i came out of the folders, the folders had a big pad lock sign on the front of it. After that i shut down the laptop and went to turn it back on. The laptop will power on like normal. I can press f12 for the boot options. which i have already tried many times. I also tried it in safe mode and what-not, but still nothing. I can hear the fan and stuff spinning up like normal. I have also put and CD into the CD ROM and that spins up fine. So after the Dell logo on the screen, it goes black and stays that way with the cursor. You can move the cursor around no problem. I should also add that the battery light is and has been flashing for a good wile. Its flashing orange and blue. I'm wondering if this has anything to do with the battery. Because my laptop will not charge with the AC adapter in it for many months now. It will only stay powered on with the AC adapter plugged in. One more thing. The LED lights over the buttons. None of the are flashing, besides one, on the far left. And i cant find out anywhere what this LED light stands for.
My son has a Toshiba Satelite P205 that he just upgraded from Windows XP Home Premium to Windows 7 32-bit. After the upgrade completed the computer booted fine. The within 20 minutes he got the BSOD and the system rebooted. Now he can't get Windows to fully start. We've tried all of the options from F8 with no success. We have the Toshiba System Recovery Disk but it won't launch. (The Boot sequence has been changed to boot from CD/DVD and then the Hard Drive.)The Memory Diagnostic from the Windows 7 disk ran fine with no errors. I'm thinking I might need to re-format/wipe the drive to start fresh but don't know where to obtain a boot CD(no floppy drive on this laptop). Does anyone recommend a software that I can purchase to clear everything without destroying the CD/DVD accessibility so I can then use the System Recovery Disk to put it back to the original factory Settings?