i need to enter safe mode, but i can't. after choosing it computer restarts. this is random time since choosing. sometimes just after still having black screen, sometimes after splash loaded, sometimes during entering the password. when it lets me to enter the passoword, it finds out that the password is not correct, when i am 100% sure this is correct.
View 2 Replies
am using windows 7 but from today evening onwards, my computer has gone into a loop where it keeps restarting explorer time and again. And am not able to do anything.This problem is present even in safe mode.I tried fixing it by deselecting all the startup user application after using msconfig cmd.in safe mode.I saw a pattern in the startup bar that every time explorer restarts it tries to open network connections. hence i disabled all network services but again same story.
View 3 Replies View RelatedI recently upgraded our old computer from Windows XP to Windows 7 Professional. It wouldn't boot from the CD to install for some strange reason so I put the hard drive in my computer and installed it from there. After it installed, I put the HDD back into the old computer and tried to boot it. Everything works fine until it says "Starting Windows". After displaying that message for about 5 seconds it restarts and brings up the choice: Run diagnostics (recommended)Start Windows normally If I choose to start normally, the same thing happens and it restarts again. If I run diagnostics it says the issue cannot be automatically repaired.The strange thing is that it will boot perfectly fine on my computer (if I put the HDD in), but cannot boot on the old one. Also, the same Windows 7 works on my computer.
View 9 Replies View RelatedI have an HP computer that I had to replace the system fan today. Now the bios date and times are completely wrong. Safe mode won't work for me just keeps restartingStart up repair doesn't do anything. The computer is from 2006. Is it possible that the motherboard or hard drive is going bad? Is it time for a new computer? I basically can't do anything on it now.
View 4 Replies View RelatedWIndows 7 premium home version on a lenovo laptop freezing at splash screen. I can boot into safe mode just fine. Whereby I have to run a system restore back to an older date but the issue still comes back up and this seems to be especially true when trying to wake it from sleep mode.
View 2 Replies View RelatedI was using my laptop, and the ****** battery charger came out, it went into low battery and was going to shut off, i stupidly put the charger back in (was in a rush) and holded down the power button so it shut off fullNow the problem is that when i turned it on. IT Does not workThe laptop turns on goes into the boot screen
[URL]
I bought the bleeping Dell Inspiron 560, was to rapidly tap F8 during startup to bring up the "Advanced Boot Options." I saw the guy at Best Buy do it but it did not work on my machine when I got home. I'm using Windows 7 Home Premium. The computer came without a manual or any disks.
View 4 Replies View RelatedI have a laptop with broken lcd. So im using it now as desktop, connecting it to an external lcd monitor.Last night I suspected a worm and tried to boot up in safe mode by pressing F8 but couldn't make it work because windows only activate the external monitor by the time it has finished loading drivers. The result was it keeps booting into normal mode.So, I remembered there's another way to boot into safe mode by accessing boot options in msconfig...Now I'm stuck with safemode and cannot do anything because safemode doesnt enable external monitor. I know for sure that I could enter password and get into safemode but I can't tell what should I press or click to access to that msconfig windows again to return boot options to normal state.
View 5 Replies View RelatedAfter attempting to start my Laptop in Safe Mode, it loaded drivers normally only to crash a few seconds later. A prompt message appears but is impossible to read because Windows immediately reboots upon showing the prompt.
View 1 Replies View RelatedWhen I turn on my Acer laptop normally it loads but then completely freezes, not letting me do anything. The only way I can use it is through safe mode. It was working fine before it suddenly broke and it is only a few months old. I thought it might be a virus? I do have up to date anti virus thoug
View 9 Replies View RelatedI have just reformatted my pc and know i cannot boot into safemode,whenever i try to load up safe mode the pc just resets once i actually getthe windows welcome logo come up just as im about to enter safemode desktop,i have scanned for malware using malwarebytes,bitdefender and superantispyware,but have found nothing
View 9 Replies View RelatedThe other night I hit the reset button at the wrong time and ever since then I'm only able to boot W7 in safe mode. I've tried all of the restore points and repair options but nothing works.
I ran chkdsk from safe mode command prompt and corrupt files were found but I can't run chkdsk /F because the partition is in use. When asked if I'd like to schedule one on next start up I say yes but the restart doesn't get far enough to initialize one. It just hands at "Loading Windows" just after the keyboard lights blink.
I've tried to do an upgrade install but you can't do that while booting from the cd or while in safe mode either.
sometimes it will reboot in Start-up repair but later i will lose internet connection, then (try to) reboot, then it will not. It's a mindless loop
View 2 Replies View Relatedcant start my computer. wont load windows. in safe mode it just sits there doing nothing. in regular mode the windows logo comes up and just sits there. cant reboot it. don't know what to do next.
View 5 Replies View RelatedI access the safe mode boot menu by pressing f8 during start up. Once there I choose boot in safe mode, hit enter and then windows lists the drivers it is booting with. The boot continues, however once done, the computer is not in safe mode, but is in normal operating mode (i.e. there are no "safe mode" indications at the perimeter of the screen, and all apps are up and running as usual).
I am not trying to fix any problem, I just wanted to be sure safe mode was there in case I needed it. A couple of days ago I actually had a piece of malware that disabled my Avast anti-virus and was preventing me from accessing the internet, and at that time I tried to boot into safe mode and had the same problem. I restored the computer with an image I had taken when the machine was new, which resolved the malware problem, but not the safe boot problem.
Incidentally, I have looked at the registry and the safe boot entries are intact:
(HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSafeBoot is there along with it's subkeys Mininal and Network).
I am using Avast anti virus (paid version), Libre Office, Skype, Firefox and have a HP office jet 4500 printer. The machine is an ASUS U43F with an I5 processor.
After installing windows 7 update plus one optional hardware update 2 days ago, windows wont start, repair itself, or safe boot. What should I do?
View 4 Replies View RelatedI am working with an emachine with windows 7 home premium installed. Tech Support Guy System Info Utility version 1.0.0.2 OS Version: Microsoft Windows 7 Home Premium, 64 bit Processor: AMD Athlon(tm) II X2 250u Processor, AMD64 Family 16 Model 6 Stepping 2 Processor Count: 2 RAM: 3839 Mb Graphics Card: NVIDIA GeForce 6150SE nForce 430, 256 Mb Hard Drives: C: Total - 703013 MB, Free - 637698 MB; Motherboard: eMachines, MCP61PM-GM Antivirus: None Was given machine with infections, tried to fix viruses with HDD installed but could not boot normal, only safe mode.Removed HDD and slaved to working system and ran virus scan. cleared 18 viruses, ran a second scan on drive and it came back clean (used norton antivirus)Loaded the HDD back into the machine and still can only boot into safe mode. Searched forums and saw similar issue and followed instructions listed below:Open Regedit.exe Navigate to HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSafeBoot Delete the subkey folder called OPTION Navigate to HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSession ManagerEnvironment Delete the value called SAFEBOOT_OPTION Reboot and done The problem is, there is no option subkey under HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSafeBoot I did delete the SAFEBOOT_OPTION under HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSession ManagerEnvironment and restarted. It booted in safemode and when I checked regedit again. the SAFEBOOT_OPTION under HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSession ManagerEnvironment was back and shows Minimal under it. I changed it to normal and restarted and it changes back to minimal after booting to safemode again.
View 2 Replies View RelatedWhen I turn it on, it loads the compaq screen, then says "windows is loading files". It then attempts to take me to the startup repair screen, but cannot load the startup repair options and just stays at a blue screen (NOT the blue screen of death).
I am unable to start the computer in safe mode as it gets to the same screen and does the same thing.
I have accessed the boot options screen and loaded windows from the disk in an attempt the repair it that way but I can not restore the computer from an earlier point in time and startup repair does nothing but search for problems for hours with no progress.
Im running windows 7 home edition 32bit The computer is a compaq presario CQ42
I just tried to install an old IDE hard drive (via a SATA converter card ) as a slave and managed to screw up windows 7 boot-up. The system initially booted up fine but didn't see the new drive. After checking to see if all the ports were enabled in the bios I tried again. The system then didn't see any hard drives. I pulled out the IDE and re-started. The system now will see the boot hard drive but will not boot in either safe or normal modes.
View 3 Replies View RelatedI'm working on my brother's girlfriend's Dell Inspiron 1764 that will begin to start windows and then immediately goes back to the post screen. I have tried to do a system restore, and recover from a system image... but of course she has made neither of these backups. The laptop will not load windows in safe mode and i have also tried to disable driver signature enforcement. I'm not exactly sure what happened before the failure, but i know my brother installed a Honda data logging program called HONDATA right before it crashed so I am suspecting some sort of driver issues. Is there anything else i can do besides the full Dell system restore that would wipe all of her data?
View 1 Replies View RelatedI had a BSOD problem launching Borderlands 2, and some other games too. My Video Card drivers are up to date and i still have BSOD. I got blue screen once more, and my pc restarted. Now I can't even start my windows, I get some black screen before windows 7 logo appears and I can't even start my windows in safe mode nor can I boot from a CD/DVD.
My system specs:
Processor: AMD FX-8120
Graphics Card: AMD Radeon HD 6850
RAM: 8GB 1866mhz
HDD: 500GB
I recently somehow got a nasty virus into my lappy. It was extremely weird since I just bought a new anti-virus (Norton, to be exact) and my PC became super slow. I recognized signs of viruses and I decided to wipe the PC clean. My friend gave two Windows 7 DVDs. However, even after making DVD the first boot order at BIOS it just doesn't work. My DVD rom makes really nasty sounds and it waits on a black screen for a bit and then it shows me to choose safe mode or start normally.
Basically, my PC has always read DVDs (logo on it confirms it). Also, Rom itself isn't broken, other discs like the Norton one work fine. Since the DVDs my friend gave me were DVD R- and DVD RW. Later, I got yet another disc which was DVD R+ but it STILL didn't work. My PC doesn't recognize the DVDs even normally, through My Computer. Did the viruses ruin my drivers or something? My rom always read DVDs but why make weird noises now?
[URL]
Well, my PC won't boot to windows now. I cannot get it to boot to a CD image or USB image. It just restarts over and over again. I can access BIOS and it says my CPU is running fine, so I doubt it's that, but I can't get it to boot anything. I've tried removing all unneeded things like the cd drive and switching GPUs and PSUs, I tried resetting ram in different slots, but it just won't boot.. The windows 7 logo pops up for about a millisecond then the pc reboots. MSI tech support was useless. They just told me to RMA the motherboard and didn't tell me what could have happened. I want to avoid RMAing this because I have to get stuff done for school, and RMA will take 5-15 business days.
I have a Dell inspiron 4010 laptop with Windows 7. I am unable to log on. The safe mode options screen keeps looping, and i am unable to boot. none of the safe mode options work, though the screen shows the loading windows files before restarting the safe mode options screen again. when i press f8 to get the advanced boot options, the system repair option is no longer there (it was there yesterday, but the system restore or system repairs didn't work), nor do any of the advanced boot options work.when i choose to disable automatic restart on system failure it appears that windows is startingbut then goes to a blue screen that says STOP: C0000135 The program can't start because %hs is missing.I believe this is happening as a result of an automatic Windows update.
View 14 Replies View RelatedI have windows 7 home premium 32 bit dell laptop. Lately, it takes more than 10 minutes before it boots before the windows logo appears). From there the computer works normally. I got a suggestion to check for malwares or viruses so that is what I did. I started by going to msconfig and edited the boot options to start automatically to safe mode with networking, then rebooted my system. After booting, it loaded up the initial screen of safe mode, but then it restarted by itself.
I am now stuck on this reboot loop going into safe mode, it won't even let me go back to normal mode. I went to startup repair, but it didn't find anything, so had to reboot again onto the same situation. I have searched for possible answers, and the best that I could get was to remove the safe boot options and go back to normal mode. The syntax to type was bcdedit /deletevalue {default} safe boot but it didn't work, same with bcdedit /deletevalue safe boot.
I am getting this : "An error occurred while attempting to delete the specified data element. Element not found."
Computer rebooted after 'starting windows' When starting in safe mode, it rebooted after loading classpnp.sys
This happened after I installed MSE and it detected a Trojan located in c:/windows. On hindsight deleting it was a bad idea.
I've tried using startup repair as well as sfc/scannow. I've also ttried unplugging the hard drives as well as changing the hard drive mode in the BIOS from ide to ADHCI and back.
my Dell Studio 1555 laptop will not boot either into regular windows or safe mode.When booting into safe mode, the very last file that will load is "CLASSPNP.SYS".When that happens it will stay stuck loading the next file for a few minutes, then restart itself into the Windows Error Recovery screen.When I try start-up repair, it goes to a blank black screen and repeats the procedure above (ie. it gets stuck and restarts a few minutes later) When I hard-shut down by pressing the power button, a BSoD appears for a fraction of a second right before it dies.What could the problem be, and what can I do to fix it? I have the windows 7 install disk, if needed. Should I go ahead and try an installation repair using the disk?
View 5 Replies View RelatedMy dell optiplex 755 runs on windows 7. How do I boot into safe mode?
View 1 Replies View RelatedEarlier today I tripped over a headphone cord and it flung my computer off my desk. I have an HP omni PC. It's the kind that had the computer and the monitor built together. I picked it back up off the floor. The power cord came out on impact. I set everything back up and was relived to hear it turn on. I selected start windows normally (win 7 64 bit) and it sat at starting windows forever. I eventually manually shutdown the computer. I powered back on and I got an option to start windows normally or use startup repair.
I thought it would be a good idea to go into startup repair. It just sat at the light blue screen with the large white mouse sitting there. Nothing happened. Nothing appeared on screen. I turned off the computer again and am just leaving it there for now. I am worried that the hard drive may have been disconnected from the fall and that's why windows won't start. Or maybe the hard drive was damaged. I tried doing a safe mode boot but it redirected me to startup repair.
So I have been trying to get my computer running for a few days now. At first it wasn't booting at all, it would be a black screen with a blinking cursor. I have cleared cmos a few times, turned psu off, drained charge from psu, turned psu back on and got it working that way for about 10 minutes, then it crashed. Ever since then I can't get it to get running again. I think it says something about "fatal error" and then goes on telling me to boot into safe mode to remove any new hardware. Is it a hardware problem I'm having? If so, I'm screwed, too broke The best I can get is the screen where it says run windows normally or run in safe mode. But it will just crash on either option I pick. And when I try to run from the dvd drive with my windows 7 disc it's just a black screen with a blinking cursor. I'm not sure what to do...ugh I feel like it's something really simple to fix. I left my computer sitting for a few months and havn't tried to boot it until recently, so I don't remember if I put any updates on it or not.
View 6 Replies View RelatedI have recently installed windows ultimate x64 on my computer.i have an asus p6t deluxe v2 mobo, i7-960 cpu and a wd velociraptor hdd. The install went ok, I even managed to restart my computer a few times after but after windows updates installed it won't boot. I tried to boot into safe mode, restore from the installer, and repair, none worked. After startup repair it says: "a patch is preventing the system from starting" and I get a 0x1f error code.(Preventing windows from downloading any updates didn't work either)
View 9 Replies View Related
