Reboots and Reboots, Tryed dual boot, Have too revert too prev Installation, Tryed everything Booting in safe mode, safe mode Comand prompt ect...
I Have a AMD 64 X2 Dual Core 6000+ 3.0 gigs of ram Radeon HD 3870 X2,, Dam It And They Want us 2 pay for this &*(%(*&^( &&^^^%%6 Sorry But I still Can't get my Vista &^%$#@$#$%^ Running either,Thank god the beta is free,Maybe ill try a Mac with linux....
Should i try i install it over Vista Instead,Last vista Beta fried my HDD.
Yesterday I left my pc running, and when I came back, found a black screen.Rebooting, I came across some random characters in the POST and also in BIOS, after which, the same black screen. I googled this, removed the video card and the bios and post look normal now( i use the onboard video), but when trying to load windows, the pc reboots.I tried system repair, chkdsk. When trying to boot in safe mode, it loads up to "AtiPcie.sys", then reboots.
I have a Windows 7 installation that I seem to be in an 'endless loop' on. First off, if I just let the system reboot, it comes to the windows 7 splash screen and then reboots again. This will happen endlessly if I let it.If I hit F8 during boot up, I do get the Windows 7 menu. I have tried using the 'repair' options, but they don't succeed in solving the problem. I have tried going into Safe Mode and that also reboots after getting to the 'CLASSPNP.sys' driver (at least that's what it displays on the screen).
So I thought I would just 're-install' Win 7. I boot from my Win 7 DVD, and my options are 'upgrade' or 'clean install'. If I do 'upgrade', the DVD tells me that I need to start Windows first and then run Upgrade. Of course, I CANNOT do that since Windows 7 won't start! I'm afraid to do CLEAN INSTALL as I don't want to lose all the files
It will only stay booted in Safe Mode. When I start the computer, it boots up, stays booted for a few minutes, then the screen goes black and it reboots. This keeps happening unless it is booted in Safe Mode. Purchased with Vista; I clean installed Windows 7 Home Premium (I know it's legit, bought it for her myself) when Windows 7 first came out.
When I turned it on, it rebooted so I started it in Safe mode and have tried/found the following problems: It had 4 adware programs and one trojan horse; removed those with Malwarebytes. Rescanned with Malwarebytes and MS Security Essentials, came out clean - Device manager showed two problems - bad drivers for co-processor and bad drivers for Graphics card. Installed those drivers and the Device Manager did not show anything wrong. Problem keeps happening.
Opened BIOS and ran both Hard Drive and Memory Diagnostics; no problems found, Did not make any BIOS changes (I have little experience with BIOS) - Ran diagnostics with Windows 7 disk; including Repair, Memory Diagnostics; no problems found - Graphics card is NVIDIA GeFroce 7150M/nforce 630M; reinstalled drivers, didn't work anything - When the screen saver goes on, there is an error message. "The screen saver can't run because it requires a newer video card or one that's compatible with Direct 3D".
This is an old computer, well out of warranty. Do I still possibly have an embedded virus? What removal tool should I get? Is it worth replacing the graphics card - if that's possible on an old laptop? Should I try a clean install of Windows 7?
Computer rebooted after 'starting windows' When starting in safe mode, it rebooted after loading classpnp.sys
This happened after I installed MSE and it detected a Trojan located in c:/windows. On hindsight deleting it was a bad idea.
I've tried using startup repair as well as sfc/scannow. I've also ttried unplugging the hard drives as well as changing the hard drive mode in the BIOS from ide to ADHCI and back.
I have been getting BSOD errors whenever booting into regular mode. Safe mode is fine (I have tweaked the registry so I have sound in safe mode) My system specs are in my profile, but used Winaudit for full specs. The winaudit report in formatted text is too big for an attachment. I have 2 attachments to this post, including zipped up minidumps. Could my registry tweak for sound have something to do with this? Perfmon /report was run, but it says:
An error occured while attempting to generate the report. The system cannot find the path specified.
I have a HP Probook 4430s and under device configurations in the F12 options, what does "Numblock on at boot" mean and what does it do. I'm still having troubles booting up.I can start up in safe mode and w/networking and have been trying to figure out how why it dosn't want to work right. When I'm in safe mode everything works fine but when i shut down and try to power back up i can only do it in one of the safe modes, also it takes a really long time to even do that.So I was just wondering what Numblock on at boot ment and what it does.
I have installed the RC build of Windows 7 as a second OS on the machine.I am finding it incredibly difficult to solve the display driver issue that I have. Currently in Device Manager my display adapter is listed as:Standard VGA Graphics AdapterI believe that, since this is occuring, any ATI graphics drivers that I try to install aren't recognising the x700 as my graphics card and so are failing to update any drivers.At the moment I'm stuck with the standard Windows display drivers which limit the resolution of the screen and disable graphics acceleration etc..If anyone has an idea of how to soI wondered whether it would have anything to do with updating chipset drivers etc...but since I've never had to do that before (and since I am still using XP on the laptop) I didn't want to start messing things up.
edit: I should add that, on my first install of Windows 7 I used Windows Update to install an 'ATI Technologies Inc. driver update for ATI MOBILITY RADEON X700' - once installed, after rebooting the screen was completely black and there was nothing I could do to get the picture back. I tried booting in low-resolution mode and safe mode but neither helped. I wondered whether it was because I had the screen set to the highest resolution possible before installing and rebooting the drivers.
Pavillion p6310y with Windows 7 Home.Is there a way to get to the recovery section of the above mentioned computer? I tried to get to the recovery from the boot up but it goes straight to the regular boot. It is infected with the W32/blaster worm
I have recently run into some issues on my machine that runs Windows 7. I can't run Windows Media Player; it just says the file name and then "Server Execution Failed".
I was advised to go into safe mode and type a command into cmd. However, safe mode would not work. At first I thought it was an F8 problem, so I was advised to go into msconfig > boot and change the system to boot into safe mode. I did that to find that safe mode gets into the driver loading screen and stops at windowssystem32driversClassPnP.sys and seems to load.
It shows the cursor, but then disappears and my computer reboots. However, since my computer is set to load into safe mode, it constantly tries to log into safe mode, which doesn't seem to work, so it just restarts, tries to go into safe mode, but can't, so it restarts again, going through the process again and again.
I have tried pressing "Delete" key at the beginning of boot up, but it does not show any thing else I can boot from. When I do get the F8 thing working, I select "Boot Windows Normally" but it just goes straight to the bootup of safemode.
I have an Acer Aspire M3800 that only has the factory restore discs that Acer eRecovery Management has asked me to make when I first bought my computer. I obtained Windows 7 through the "free upgrade" program Acer is running.
I have read about this problem a lot, still no solution. Windows 7 Professional is not booting in normal mode, only in safe mode. I have tried the following things -1) in msconfig, have seen under the boot tab and everything is unchecked including safe boot.2) have disabled all services and startup, left only microsoft services and startups checked, actually tried a lot of combinations as well.3) restored system to an earlier date when it was confirmed to be working.4) have reset the BIOS settings to BIOS defaults.Everytime, it is not booting in normal mode, only in safe mode
i had an issue with a PC after trying to change the memory on an Windows Vista PC..however the PC was not booting up so i put back the original RAM and when i booted i got the Blue screen of death error. after booting into safe mode and running diagnostics on the PC i rebooted again but still same error. i then when into the BIOS and rebooted in failsafe mode. this then caused the PC to not boot up at all, and the HDD light is not blinking
A few of my programs are unable to communicate with their servers now and I can't figure out why as they were find two weeks ago and I haven't made any changes since then. The issue lies with a service/program within Windows as all the programs communicate fine in Safe Mode. Windows Firewall and ICS are both disabled within Services. Malwarebytes (my only AV right now) is disabled also.I know this is an ongoing and repetitive subject but the numerous searches are all resulting in pointing fingers at an AV program, which I am sure is completely disabled.
The problem is that when I boot my PC it will go black and restart after getting to the windows logo boot part. If I try Safe mode it will get to SYSTEM32DRIVERSDISK.SYS and then just bluescreens and restarts again.Before it got to CLASSPNP.SYS but I tried to rename it to CLASSPNP.OLD and now it didn't really change much. I also tried using this code but it just tells me that some files are corrupt and it cannot repair it.If I try the automatic repair option it will just try and repair for a couple of hours and then say it cannot repair and rebooting the PC.
The problem is that when I boot my PC it will go black and restart after getting to the windows logo boot part. If I try Safe mode it will get to SYSTEM32DRIVERSDISK.SYS and then just bluescreens and restarts again.Before it got to CLASSPNP.SYS but I tried to rename it to CLASSPNP.OLD and now it didn't really change much. I also tried using this code but it just tells me that some files are corrupt and it cannot repair it.If I try the automatic repair option it will just try and repair for a couple of hours and then say it cannot repair and rebooting the PC.
A few of my programs are unable to communicate with their servers now and I can't figure out why as they were find two weeks ago and I haven't made any changes since then. The issue lies with a service/program within Windows as all the programs communicate fine in Safe Mode. Windows Firewall and ICS are both disabled within Services. Malwarebytes (my only AV right now) is disabled also. I know this is an ongoing and repetitive subject but the numerous searches are all resulting in pointing fingers at an AV program, which I am sure is completely disabled.
really have never seen anything quite like this. When I boot up my PC and it gets to the desktop, a program window pops up and the mouse and keyboard will not work.Therefore, I cannot clear the program from the desktop or go anywhere to run scans or the like to see if the problem is virus related. When I go into safe mode, it does the same thing. I tried restoring to last known configuration with no System Restore shows no restore points. I can't do anything including get you information on my PC. I am running Windows 7 32 bit on a HP/Compaq DC 7600 C/PD 950. I am running Avast Anti-Virus Suite Pro. Regardless once on the desktop, I can not go anywhere. What the heck? Right now I am working on my laptop.
A few of my programs are unable to communicate with their servers now and I can't figure out why as they were find two weeks ago and I haven't made any changes since then. The issue lies with a service/program within Windows as all the programs communicate fine in Safe Mode. Windows Firewall and ICS are both disabled within Services. Malwarebytes (my only AV right now) is disabled also.
I know this is an ongoing and repetitive subject but the numerous searches are all resulting in pointing fingers at an AV program, which I am sure is completely disabled.
After attempting to start my Laptop in Safe Mode, it loaded drivers normally only to crash a few seconds later. A prompt message appears but is impossible to read because Windows immediately reboots upon showing the prompt.
After almost a year of "no problems" operation my PC has suddenly developed a strange will of its own on shut-down.I always put my PC into hibernate mode rather than switching it off. I use the START/Shut Down/Hibernate series of steps. Suddenly recently, my PC still goes into hibernate, as previously, but after approx 2-3 seconds the PC suddenly restarts! The only way to end PC use is now to shut it down completely which is a pain as it takes far longer to restart next time I use the machine.
the computer I am concerned with is running Windows 7 with IE8, Microsoft Security Essentials and Malwarebytes Anti-Malware. I am currently in Safe Mode with Networking without issue.The owner of the computer says that something happened earlier today while he was online that sounds like some false antivirus popup, but he's unsure. Here are the symptoms in normal mode. Every application, from moving through them to opening and closing them, runs exceptionally slow - one to three minutes to open, at least a minute to open internet pages. I noticed that, when in IE, as the pages are loading the IE page disappears and reappears. I am not very familiar with Windows 7 so I don't know if it is related. The computer seems to be getting slower as the day goes on. CPU usage is very high.So far, I have disabled many startup items that were unnecessary. I ran CCleaner and cleaned up. MBAM was run in both normal and safe mode, full scans, and found nothing. This is also posted in Viruses and Malware, but I'm unsure where it should live.
window 7 working on safe mode and unable to choose the another restoration point and it is not loading in normal mode -after installed third party software worked on that for few hours, then after switched off and later it switched on then after this problem started, automatic repair done, nothing is notified
i recently ran into a problem with starting up my computer. I have the blue screen of death. I've tried safe mode. It won't work. I would click safe mode it would load and then go back to the blue screen. I have a lenovo laptop and I'm not trying to pay 150-200 for it!
I own an HP G-62-347 Notebook, Windows 7 64 bit, Microsoft Security Essentials, Windows Firewall, no other real time AV, no other Firewalls, Windows Defender disabled as Microsoft instrucs for MSE, 3 GB Raam, 313 GB HDD, AMD Dual Core P-380 processor.My Laptop began freezing 8-10 minutes after bootup logon. No matter what I was doing, Media, Excell, Word, it would freeze up and hang. Sometimes CTL_ALT_DLT would unfreeze it, even before the task manager appeared, but it will take 3-4 minutes with an o[ague screen and the progress "circle" moving then unfreeze, sork 1-2 minutes, freeze, etc. Then all clicks on something to activate would result in loooong (long) delays, 15 to 45 seconds, then the new screen or window or peogram would open, sometimes frozen up.This did not happen in safe mode.I have (on suggestions) removed all things from my start up or programs that other's have suggested, Google Update files, and three or four others that others had issues with that I found on the net. I have also removed programs that I had installed around then.
I have also run, in Safe Mode, MSE, MS Safety Scanner, MS malicious file remover, ESET online Scanner, my laptop is clean.I have used mscong to disable all non-microsoft items to see if that helped. It did not. Same issues.I have used startup repair, and after scanning received a message that there was a problem, but that it could not fix it, did I want to send a report to Microsoft, I checked yes and it sent me to System Restore, ran it for about a week ago which was when I had downloaded some software, and the problem still existed, which sent me back to System Repair, ran it, same error message, reported again.I used a Repair Disk to get back on the laptop a coulple of times when needed, but ultimately, the problem surfaced still.I have used ReImage Plus to rebuild all my defective Windows Files and a lot of my 3rd party defective files. And, I also did a Win 7 repair install.I am pretty convinced something is being loaded somewhere, but can't find where or who or what.Am I on the right track? Have I missed something? Am I wrong? I do not really want to do a clean re-install of Windows 7, for if I do I am reformatting everything to clean any and everything.... sort of NUKE it... but would rather find the culprit (for education purposes). And, I dislike installing and updating and setting up everything again more than I hate "boiled okra!"Anyone and Everyone that has had to do with this or similar sounding issue, please reply. I have two weeks invested, and would like to "graduate" resolving this and getting the learning experience of WHY?
I am using acer laptop,intel Pentium processor,windows7 professional os,my problem is windows is not starting normally and is running safe-mode.when entering normal mode it is displaying "welcome" after entering password "Please wait",it takes a long time to starting window and i'm waiting more than 24 hours but its not starting window normally...but it starting safe mode.
My laptop hangs up/ freeze in normal mode. Now I can only open it on safe mode. I was only copy pasting some files couple days ago when it happened. I have to hold the power button to turn it off. I already tried system restore and reformatted it twice. I'm using HP Pavilion dm4-1160us, windows 7 64-bit.
My Windows 7 is:- x64 Home Premium SP1- the original installed OS on the system.- an OEM version. Came pre-installed on system.- The age of system (hardware) is 8 Months.- The age of OS installation is 8 Months.- Never re-installed.Hardware is:Sony VAIO VPC-EB46FXIntel Core i5 CPU M480 @2.67GHz
I can't boot my computer in normal mode or safe mode. When I try to do so, after the "starting windows" page the only things that come up are my mouse, a black screen/background, and a "logonui.exe-bad image- Authui.dll isn't designed to run on windows" error/message (not the exact message). I can't use a system restore (it can't find a restore point), the image recovery tool finds no image to restore from, system repair either doesn't find a problem or can't fix the problem, and basically nothing else works (none of the advanced boot options or other various buttons and tools do anything noticeable). I've even tried to use sfc in command prompt, but whenever I do any sfc things at all (/scannow, verifyonly, verifyfile, etc.) it says there is a system repair pending that requires a reboot. I've restarted 7-8 times and the exact same message keeps coming up. I'm looking for any general help I can get right now, [I can post my computer specifics in an hour when I have time](posted a few). I have an HP pavilion dv6-6135dx wiht Windows 7 x64.Processor: AMD a8-3500m APU, raedon graphics bios vender/version: insyde, f. 20.I'm having trouble getting more info because my computer is still crashing occasionally and I don't really know what else is relevant; if you need more, I might need directions on how to get it. Especially if it involves command prompt.I should also add that it has been crashing more often than I think is normal ever since I got it, but recently it BSODed 3-4 times a day. I have antivirus and also ran a full malwarebytes scan yesterday, and it only found one little issue which was resolved.
Windows 7 x64 does not boot into Safe Mode or Safe Mode with command prompt. Normal mode boots perfectly. Are there any suggestions on how to resolve this? I've tried startup repair and attempted fix boot, etc. No affect. The unit is free of infection. I also tried using SFC, but it said everything was fine.
