Rapid Beeping At Starting Windows Screen Then Normal Again
Aug 10, 2012
I am using Windows 7 Pro on a Dell Inspiron 1520. Today, when I attempted to start the unit, I heard a rapid beeping that was uncontrollable until I clicked the Control Key. There are no error messages. I have done 2 cold boots and a memory diagnostic (which found no errors) with no positive results. It begins right when the screen indicates it is Starting Windows. Once I get past that, it seems to operate normally, but I am concerned there is a root problem that will surface with disastrous results at a later time.
View 5 Replies
ADVERTISEMENT
Jan 13, 2012
I have compaq presario sr1630nx and I have an issue that started after I opened the case and used my compressor to blow the dust out of it its not the first time ive done this like 4 times to be exact. My machines issue starts when I turn it on the fans go on but the cpu fan runs the loudest and it displays nothing other attempts it turns on normal but still nothing on the display. After idk the twentieth attempt of turning on and off it finally boots up normally, but I cant do nothing major like go on the web to long because it freezes right away. i could listen to music but it will eventually freeze after fifteen minutes or the display will turn to an orange or blue screen. The pc does have some upgrades like a graphics card for two dvi inputs and power supply which were done about a year ago.
View 1 Replies
View Related
Jun 21, 2011
Is it normal for windows 7 to sometimes crash when it says starting windows? my computer is posting, its either a problem with my SSD or my motherboard if this isn't normal...
View 4 Replies
View Related
Jan 16, 2013
I am using acer laptop,intel Pentium processor,windows7 professional os,my problem is windows is not starting normally and is running safe-mode.when entering normal mode it is displaying "welcome" after entering password "Please wait",it takes a long time to starting window and i'm waiting more than 24 hours but its not starting window normally...but it starting safe mode.
View 1 Replies
View Related
Aug 29, 2011
I have just attached another screen to my Vaio.i used the Dual monitor setup windows 7 offers change the appearance of your displays.I chose the "extended these displays" my problem happened after applying the new settings my laptop screen went up side down while my new monitor went blue screen.how can i get my laptop screen back to normal?
View 14 Replies
View Related
Sep 15, 2012
My monitor is an HP S2031. The computer is a Compac Presario CQ5814 PC, Processor is an AMD Dual Core Processor E-350. Running Windows 7 Home Premium 64 Bit. Bought in 2011. Running Chrome Browser most of the time. Shockwave crashes on me quite often but seems to "fix" itself. This had happened shortly before the monitor turned red. I had turned off the computer and when it was turned back on the screen was red. I restarted it a couple of times and it finally returned to normal.
View 1 Replies
View Related
Jan 4, 2013
Ok windows stucks on welcome, it will not boot so i am doing a startup repait but its stuckIt asked meif i want to do system recovery and i clicked no cancel , (only repair) but the blue bar that moves while its repairing it doesnt move its frozen and it says attempting repairs... nothing moves
View 1 Replies
View Related
Mar 5, 2011
How can I return to normal font for my email screen? What is making it shrink?
View 2 Replies
View Related
Jan 12, 2012
I've got a: Presario CQ62 notebook pc with a AMD Athlon(tm) II P320 Dual Core processor, and I can't get past the start up screen with the "starting windows" animation. It will show part of the animation then simply hang. I have a very bad battery but am keeping the computer plugged in. When I attempt a system recovery it says: "A disk read error occurred press ctrl+alt+del to restart" I've tried this many times and I get the same message each time. Beyond that I have no idea what to try.
View 2 Replies
View Related
Aug 13, 2012
I seem to have a odd issue with my laptop. Sometimes when i boot into windows there would be a blank screen with a mouse cursor after the starting windows screen. I would have to wait for approximately 5 minutes for it to show up my logon screen. I've been having this issue since the start of the year and have attempted to solve it but they have been unsuccessful. Things i've tried:Reformat Windows (Did it 4 times)Purchasing a SSDReduced the start-up items(barely any)?
View 14 Replies
View Related
Sep 26, 2009
Is there a way to change the background image that displays during boot before it gets to the login screen?
View 5 Replies
View Related
Sep 11, 2012
Doing a Normal startup, or booting from the Windows 7 cd it will get so far as the Starting Windows screen, the Microsoft copy-write shows up briefly greyed out some, and just sits there. In Safe Mode, it loads everything seemingly, lastly avgidsha.sys, then sits on Please wait...I have narrowed it down to hot the HDD or memory. I've put another HDD with Windows 7 on it, getting the same results. The MemTest 86+ cd actually loads and runs, came up 100% with no errors. Other suggestions that I have found use bootable CDs that want to start Windows first.The Windows 7 CD, Windows Defender Offline, Windows Recovery disk all get stuck at the same place as the HDD, the Starting Windows screen
View 8 Replies
View Related
Dec 24, 2012
My computer was working fine yesterday. I didn't shut it down, but hibernated it. And went to sleep before it was fully hibernated. When i woke up, it was still on and the desktop was black. I tried to restart, But the desktop is still black saying "no analog input". But the processor is still running with beep sound and lights on. I tried changing the cable, unplugging everything and pressing on the power button for few seconds but no use.
View 5 Replies
View Related
Nov 15, 2009
I am running a Linux OS right now and am trying to install windows 7.
I turn on he computer and run off the disc. It let's
me load off the cd but can't get past the starting windows screen. Above the
starting windows is a spot of color but no other graphic.
What do I do from here?
View 5 Replies
View Related
Mar 27, 2011
Regardless of what I choose, it goes to the "Starting Windows" screen, and shows the Win7 animation, then it shows a black screen with just a mouse cursor I can move around, but nothing after that. Normally it shows the Win7 login screen. Ctrl + Alt + Del does nothing.I've tried powering off the tower entirely and unplugging and then powering back on, but I always get the same Safe Mode prompt, and the same black screen.
View 7 Replies
View Related
Jan 18, 2010
I have installed WIN 7 64 and it has developed a problem..It wont boot to the desk top. It will post and go to the starting Windows screen and stops there..It wont go to safe mode.Is there a way to make a boot disk to get it to start or any kind of a diagnostic disk that a dummy can do?
View 7 Replies
View Related
Jul 20, 2012
When ever I turn my computer on it is always stuck on the Starting Windows screen and when I try and do it in safe mode it works but was I am signed in all that shows up is a black screen with Safe Mode in each corner. I have also tried start up repair but it says it can not find a problem or it will just continually search for a problem (waited 4 hours then I just turned it off)
View 7 Replies
View Related
Dec 4, 2012
I made a new PC and powered it up, first I received an error 'CPU FAN ERROR' then I went into bios and deactivated fan control. From their onwards I have been encountering blue screen during starting windows. The copy of windows 7 is pirated.. just to mention.
View 2 Replies
View Related
Dec 19, 2012
My Windows 7 is running slow however it is different from simply lagging. The mouse works fine however clicking on applications does not bring them up. The only difference I can see is an error message coming up saying "Intel Rapid Storage Technology not working". Any ideas on what I should do or extra information you require?
View 1 Replies
View Related
Jun 21, 2012
We'll I've found others with similar issues, but none exactly like this. Have the HDD and SDD setup on RAID0 due to using IRST. 64Gb of the SDD is allocated as RAID0. When W7 prompts me to select the drive for W7 installation the only disk that appears is the 64Gb unallocated SDD sector.I've loaded the IRST 64bit drivers from the ASUS Mobo disk too. It recognizes the file I direct it to, but once loaded it still only recognizes the 64Gb unallocated SDD.
View 2 Replies
View Related
Jan 9, 2012
My Asus G73-JH laptop is currently freezing at the Windows Starting screen. I've read a lot of other forum posts that feature the same problem, BUT there is artifacting (bunch of colored dots) on the top of this screen that goes across the "Starting Windows" screen in a sort of horizontal line. Sometimes it just goes straight to the "Windows has failed to startup" screen. None of the System Recovery Options from the Startup Tool seem to help fix the problem, they've all been tried. Trying to boot in safe mode doesn't work either, as after it starts to load the files, the artifacting appears on the top again after about the third file and it freezes.
I have not made ANY major changes to anything on the system for over two months prior. Because of the artifacting seen, I imagine the video card is fried or malfunctioning. I called Asus and all they suggested to me so far was to reformat, because apparently they think its a driver issue, but I'd like to consider myself fairly tech savvy and believe that there has got to be a better solution that does not involve reformatting the hard drive, as I had a lot of important data that had been stored and not backed up the previous night before the unexpected freezing. The only things I seem to have access to is BIOS and the Startup Tool. I have a System Recovery Disc too, and am curious if there is a solution to this problem (I am not well versed in BIOS), and (assuming the video card is shot) if there would be a way I can access by data and possibly back it up before reformatting so I can persuade Asus support that my card is in fact shot so I can send it in for a replacement!
View 1 Replies
View Related
Jun 11, 2012
Upon start-up, two options are given: "Start Windows Normally" or "Launch Startup Repair (recommended)".If the Start Windows Normally option is chosen, then the starting windows screen comes up and stays. If I launch the startup repair option, then I still can not get the problem fixed.From the Startup Repair Screen however, I can launch command prompt and restore options,a restore is not really an option because I have not set up a restore point in a while.
View 4 Replies
View Related
Jul 7, 2012
While watching a live feed on the internet, it stopped responding, so i held down the power button on my laptop to turn it off with the aim of restarting it. Unfortunatley now it won't restart and freezes no the 'starting windows' page. I have tried safe mode with networking, restaring at last known good configuration, booting from cd and repairing but nothing has worked.
View 9 Replies
View Related
Dec 26, 2012
I recently purchased a Dell XPS 15 (l521x) that came with Windows 8. The system boots from the hard drive through UEFI by default, so I think the hard drive is already GPT. I am attempting to install Windows 7 from a UEFI bootable USB. The system goes through the 'copying files' phase and then goes to the Starting Windows screen. As the colored dots of the Windows logo are circling, the system freezes. Can someone help me fix this problem? The following are the steps I took in order to install Windows 7:
- Formatted a brand new 4GB USB drive to FAT32
- Downloaded Windows 7 ISO (I have a key)
- Extracted ISO files to USB
- Made adjustments so that USB is UEFI bootable (efi/boot/bootx64.efi)
- In BIOS, set SATA Operation to AHCI and disabled Secure Boot
- Select USB drive from UEFI boot menu
View 9 Replies
View Related
Oct 23, 2009
i created a partition and formatted it of 70gb to install windows 7 in it. Im obviously using the clean install method, everything goes fine. It expands the files, it installs them,copies them, etc. When my system is booting up, it shows me the screen of windows below saying "windows is starting up", the problem is that windows never starts up, i left it for a night, and it didnt start up, it just stayed there. Im trying to install windows 7 64bit, any help would be greatly appreciated.
View 9 Replies
View Related
Nov 17, 2009
When I run the Windows 7 Home Premium OEM disc I get past "loading files" and then freeze on "starting windows". I see 4 little colored balls in the center of the screen (guessing the start of the MSFT logo) and then everything freezes.
Here's what I've got:
Monitor: Samsung T260HD 25.5in Rose/Black LCD w/ATSC
HDD: 2 x Seagate 1.5TB Serial ATA HD 7200/32MB/SATA-3G
Memory: Corsair Dominator 6144MB PC12800 DDR3 1600MHz (3x2)
DVD: LG 22X DVDRW SATA
Motherboard: ASUS P6TD Deluxe Intel X58 Socket LGA1366 MB
Power Supply: Corsair 950w 80 Plus Power Supply
GPU: 5850 is backordered, so am using an old Nvidia 6600 GT to attempt to install Windows - connected to monitor with DVI cable
OS: Windows 7 Home Premium OEM
I've done lots of research and tried:
1. Using a PS2 keyboard/mouse
2. Disabling USB in bios
3. Disabling just about everything else in bios
4. Tried w/ 2MB, 4MB and 6MB ram
Any help or suggestions would be greatly appreciated.
View 33 Replies
View Related
Jan 6, 2012
a week ago my windows 7 ultimate crashed in the starting screen showing the dam blue screen and warning me that windows couldn't start. I went to the self repair tool.It tool like 4 hours to fix the issue. Then it said, that windows will start normally after that. What a lie. After the starting screen I got the black screen, just with the mouse. I tried everything I know, scanning the disk surface with other computer, I used the windows 7 installation CD. And that told me it couldn't find any issue starting windows. What can I try now? This happens evenwhen I boot normally or in any safe mode.
View 3 Replies
View Related
Jan 10, 2012
My Asus G73-JH laptop is currently freezing at the Windows Starting screen. I've read a lot of other forum posts that feature the same problem, BUT there is artifacting (bunch of colored dots) on the top of this screen that goes across the "Starting Windows" screen in a sort of horizontal line. Sometimes it just goes straight to the "Windows has failed to startup" screen. None of the System Recovery Options from the Startup Tool seem they've all been triedTrying to boot in safe mode doesn't work either, as after it starts to load the files, the artifacting appears on the top again after about the third file and it freezes.
I have not made ANY major changes to anything on the system for over two months prior. Because of the artifacting seen, I imagine the video card is fried or malfunctioning. I called Asus and all they suggested to me so far was to reformat, because apparently they think its a driver issue, but I'd like to consider myself fairly tech savvy and believe that there has got to be a better solution that does not involve reformatting the hard drive, as I had a lot of important data that had been stored and not backed up the previous night before the unexpected freezing.The only things I seem to have access to is BIOS and the Startup Tool. I have a System Recovery Disc too, and am curious if there is a solution to this problem (I am not well versed in BIOS), and (assuming the video card is shot) if there would be a way I can access by data and possibly back it up before reformatting so
View 3 Replies
View Related
Feb 29, 2012
My system opened with a red screen and I havent been able to get passed that screen. I tried to reinstall my windows 7 install disk, but all it did was keep getting to the make user name and password screen and from there just started over with the loading files screen. It would never complete the install.
View 1 Replies
View Related
Mar 19, 2012
My dad's Opltiplex 760 Core 2 Duo Desktop with 8GB of Memory keeps looping on the Starting Windows screen. I have tried repair but it didn't work. When disabling restart on system failure, I get this:Stop 0x0000007B (0xFFFFF880009A98E8, 0xFFFFFFFFC0000034, 0x0000000000000000,0x000000000000 0000)"
View 5 Replies
View Related
Oct 20, 2012
I turned on my PC earlier on today and there was a white bars/lines on the screen throughout the bootup process. I'm unable to boot into windows as it hangs and goes into black screen after loading past the windows logo, however I'm able to boot into safe mode but still having the screen filled with white lines. I've tried system restore to no avail. I'm thinking its either the graphics card or the monitor.
AMD FX-8120
Windows 7 32Bit
4GB Ram
AMD HD6870
View 1 Replies
View Related
