My dad's Opltiplex 760 Core 2 Duo Desktop with 8GB of Memory keeps looping on the Starting Windows screen. I have tried repair but it didn't work. When disabling restart on system failure, I get this:Stop 0x0000007B (0xFFFFF880009A98E8, 0xFFFFFFFFC0000034, 0x0000000000000000,0x000000000000 0000)"
View 5 RepliesMy granddaughter has a laptop with Windows 7 pre-installed. I went to turn it on after charging it and the Startup Repair window comes up. I can't get any System Repair options except for Startup Repair which can not repair the computer automatically. This is the problem details listed:
StartupRepairOffline
6.1.7600.16385
6.1.7600.16385
unknown
21200831
autofailover
20
NoRootCause
6.1.7600.2.0.256.1
I don't have much information on this laptop since we are on vacation. The only thing my daughter told me was that Windows was preinstalled. The laptop is ASUS.
I've built my new computer a week ago and I'm having a problem and I need to know ASAP if any part is defective to do a RMA.
When I play games, (League of Legends, Cod4,..), my computer randomly crashes on a black screen and a looping bug sound. The monitor says ''Monitor going to sleep''. I've tried to run OCCT on my GPU for about 30 minutes @ 90 degrees C withouth problem. I've done one or two pass in Memtest+ to check my RAM too.
Any thoughts on this? Maybe it is my PSU? I've heard about the NVidia HD audio too.
Here is my rig:Windows 7 Home Premium 64 bits CPU: Intel Core i5-3570K PSU: COOLER MASTER GX Series 750W CASE: COOLER MASTER HAF 922 MOBO: MSI Z77A-G45 LGA 1155 Intel Z77 GPU: EVGA SuperClocked 012-P3-1573-AR GeForce GTX 570 RAM: G.SKILL Ripjaws X Series 8GB DDR3 1600 HDD: WD Caviar Black 1TB 7200 RPM 64MB Cache
today a little problem cropped up as i tried to watch a Internet video. as soon as i go to open it i got a sound loop crash (sounded like buzzing) and when i went to login it would crash on the windows 7 'jingle' at the login screen. this started happening the restart after i did a windows update, specifically kb982018, kb2532531, kb2529073, kb2675157 and kb2505438. i also used a tcp optimizer and ran this batch file to further optimize my internet connection beforehand:
code: :: (c) speed guide, inc. - http://www.speedguide.net:: use at your own risk. no warranty express or implied.
:: permission granted to copy, distribute and modify, provided
[code].....
I've built my new computer a week ago and I'm having a problem and I need to know ASAP if any part is defective to do a RMA. When I play games, (League of Legends, Cod4,..), my computer randomly crashes on a black screen and a looping bug sound. The monitor says ''Monitor going to sleep''. I've tried to run OCCT on my GPU for about 30 minutes @ 90 degrees C withouth problem. I've done one or two pass in Memtest+ to check my RAM too. Maybe it is my PSU? I've heard about the NVidia HD audio too. Here is my rig: Windows 7 Home Premium 64 bits CPU: Intel Core i5-3570K PSU: COOLER MASTER GX Series 750W CASE: COOLER MASTER HAF 922 MOBO: MSI Z77A-G45 LGA 1155 Intel Z77 GPU: EVGA SuperClocked 012-P3-1573-AR GeForce GTX 570 RAM: G.SKILL Ripjaws X Series 8GB DDR3 1600 HDD: WD Caviar Black 1TB 7200 RPM 64MB Cache
View 9 Replies View RelatedI am running the 64-bit version of Windows 7 along with IE9. I have found that a problem exists for both the 32-bit as well as the 64-bit version of IE9. I find that for the 32-bit IE9 there are 2 "iexplore.exe *32" files running when the program is started. With the 64-bit version of IE9 there are 2 "iexplore.exe" files running but that's not the problem.
I have found that when I have checked the box "Delete browser history on exit" (Tools - Internet Options - General tab - Browsing History) this sets off the problem on IE9 exit. Both of the iexplore.exe disappear but 2 new files rundll32.exe (*32 for the 32 bit version) appear. These 2 new files run for several minutes at 100% cpu and each will have up to 680Mb of memory. If I go back and uncheck the "Delete browser history on exit" these files, rundll32.exe do not appear and the problem goes away.
It appears the problem is with "Delete browser history on exit" function. I've been using IE9 since it came out and never had my computer, which is now freezing while the rundll32.exe are running, happen before. Ran Malwarerbyts, Super anti-spyware, Spybot, MS Essentials, Advanced system care (Just the Malware finder), Argente utilities (Just the Malware finder), System Mechanic (Just the Malware finder) in safe mode and nothing. I also am not using registry cleaners.
I've got a: Presario CQ62 notebook pc with a AMD Athlon(tm) II P320 Dual Core processor, and I can't get past the start up screen with the "starting windows" animation. It will show part of the animation then simply hang. I have a very bad battery but am keeping the computer plugged in. When I attempt a system recovery it says: "A disk read error occurred press ctrl+alt+del to restart" I've tried this many times and I get the same message each time. Beyond that I have no idea what to try.
View 2 Replies View RelatedI seem to have a odd issue with my laptop. Sometimes when i boot into windows there would be a blank screen with a mouse cursor after the starting windows screen. I would have to wait for approximately 5 minutes for it to show up my logon screen. I've been having this issue since the start of the year and have attempted to solve it but they have been unsuccessful. Things i've tried:Reformat Windows (Did it 4 times)Purchasing a SSDReduced the start-up items(barely any)?
View 14 Replies View RelatedIs there a way to change the background image that displays during boot before it gets to the login screen?
View 5 Replies View RelatedDoing a Normal startup, or booting from the Windows 7 cd it will get so far as the Starting Windows screen, the Microsoft copy-write shows up briefly greyed out some, and just sits there. In Safe Mode, it loads everything seemingly, lastly avgidsha.sys, then sits on Please wait...I have narrowed it down to hot the HDD or memory. I've put another HDD with Windows 7 on it, getting the same results. The MemTest 86+ cd actually loads and runs, came up 100% with no errors. Other suggestions that I have found use bootable CDs that want to start Windows first.The Windows 7 CD, Windows Defender Offline, Windows Recovery disk all get stuck at the same place as the HDD, the Starting Windows screen
View 8 Replies View RelatedMy computer was working fine yesterday. I didn't shut it down, but hibernated it. And went to sleep before it was fully hibernated. When i woke up, it was still on and the desktop was black. I tried to restart, But the desktop is still black saying "no analog input". But the processor is still running with beep sound and lights on. I tried changing the cable, unplugging everything and pressing on the power button for few seconds but no use.
View 5 Replies View RelatedI am running a Linux OS right now and am trying to install windows 7.
I turn on he computer and run off the disc. It let's
me load off the cd but can't get past the starting windows screen. Above the
starting windows is a spot of color but no other graphic.
What do I do from here?
Regardless of what I choose, it goes to the "Starting Windows" screen, and shows the Win7 animation, then it shows a black screen with just a mouse cursor I can move around, but nothing after that. Normally it shows the Win7 login screen. Ctrl + Alt + Del does nothing.I've tried powering off the tower entirely and unplugging and then powering back on, but I always get the same Safe Mode prompt, and the same black screen.
View 7 Replies View RelatedI have installed WIN 7 64 and it has developed a problem..It wont boot to the desk top. It will post and go to the starting Windows screen and stops there..It wont go to safe mode.Is there a way to make a boot disk to get it to start or any kind of a diagnostic disk that a dummy can do?
View 7 Replies View RelatedWhen ever I turn my computer on it is always stuck on the Starting Windows screen and when I try and do it in safe mode it works but was I am signed in all that shows up is a black screen with Safe Mode in each corner. I have also tried start up repair but it says it can not find a problem or it will just continually search for a problem (waited 4 hours then I just turned it off)
View 7 Replies View RelatedI made a new PC and powered it up, first I received an error 'CPU FAN ERROR' then I went into bios and deactivated fan control. From their onwards I have been encountering blue screen during starting windows. The copy of windows 7 is pirated.. just to mention.
View 2 Replies View RelatedMy Asus G73-JH laptop is currently freezing at the Windows Starting screen. I've read a lot of other forum posts that feature the same problem, BUT there is artifacting (bunch of colored dots) on the top of this screen that goes across the "Starting Windows" screen in a sort of horizontal line. Sometimes it just goes straight to the "Windows has failed to startup" screen. None of the System Recovery Options from the Startup Tool seem to help fix the problem, they've all been tried. Trying to boot in safe mode doesn't work either, as after it starts to load the files, the artifacting appears on the top again after about the third file and it freezes.
I have not made ANY major changes to anything on the system for over two months prior. Because of the artifacting seen, I imagine the video card is fried or malfunctioning. I called Asus and all they suggested to me so far was to reformat, because apparently they think its a driver issue, but I'd like to consider myself fairly tech savvy and believe that there has got to be a better solution that does not involve reformatting the hard drive, as I had a lot of important data that had been stored and not backed up the previous night before the unexpected freezing. The only things I seem to have access to is BIOS and the Startup Tool. I have a System Recovery Disc too, and am curious if there is a solution to this problem (I am not well versed in BIOS), and (assuming the video card is shot) if there would be a way I can access by data and possibly back it up before reformatting so I can persuade Asus support that my card is in fact shot so I can send it in for a replacement!
Upon start-up, two options are given: "Start Windows Normally" or "Launch Startup Repair (recommended)".If the Start Windows Normally option is chosen, then the starting windows screen comes up and stays. If I launch the startup repair option, then I still can not get the problem fixed.From the Startup Repair Screen however, I can launch command prompt and restore options,a restore is not really an option because I have not set up a restore point in a while.
View 4 Replies View RelatedWhile watching a live feed on the internet, it stopped responding, so i held down the power button on my laptop to turn it off with the aim of restarting it. Unfortunatley now it won't restart and freezes no the 'starting windows' page. I have tried safe mode with networking, restaring at last known good configuration, booting from cd and repairing but nothing has worked.
View 9 Replies View RelatedI recently purchased a Dell XPS 15 (l521x) that came with Windows 8. The system boots from the hard drive through UEFI by default, so I think the hard drive is already GPT. I am attempting to install Windows 7 from a UEFI bootable USB. The system goes through the 'copying files' phase and then goes to the Starting Windows screen. As the colored dots of the Windows logo are circling, the system freezes. Can someone help me fix this problem? The following are the steps I took in order to install Windows 7:
- Formatted a brand new 4GB USB drive to FAT32
- Downloaded Windows 7 ISO (I have a key)
- Extracted ISO files to USB
- Made adjustments so that USB is UEFI bootable (efi/boot/bootx64.efi)
- In BIOS, set SATA Operation to AHCI and disabled Secure Boot
- Select USB drive from UEFI boot menu
i created a partition and formatted it of 70gb to install windows 7 in it. Im obviously using the clean install method, everything goes fine. It expands the files, it installs them,copies them, etc. When my system is booting up, it shows me the screen of windows below saying "windows is starting up", the problem is that windows never starts up, i left it for a night, and it didnt start up, it just stayed there. Im trying to install windows 7 64bit, any help would be greatly appreciated.
View 9 Replies View RelatedWhen I run the Windows 7 Home Premium OEM disc I get past "loading files" and then freeze on "starting windows". I see 4 little colored balls in the center of the screen (guessing the start of the MSFT logo) and then everything freezes.
Here's what I've got:
Monitor: Samsung T260HD 25.5in Rose/Black LCD w/ATSC
HDD: 2 x Seagate 1.5TB Serial ATA HD 7200/32MB/SATA-3G
Memory: Corsair Dominator 6144MB PC12800 DDR3 1600MHz (3x2)
DVD: LG 22X DVDRW SATA
Motherboard: ASUS P6TD Deluxe Intel X58 Socket LGA1366 MB
Power Supply: Corsair 950w 80 Plus Power Supply
GPU: 5850 is backordered, so am using an old Nvidia 6600 GT to attempt to install Windows - connected to monitor with DVI cable
OS: Windows 7 Home Premium OEM
I've done lots of research and tried:
1. Using a PS2 keyboard/mouse
2. Disabling USB in bios
3. Disabling just about everything else in bios
4. Tried w/ 2MB, 4MB and 6MB ram
Any help or suggestions would be greatly appreciated.
a week ago my windows 7 ultimate crashed in the starting screen showing the dam blue screen and warning me that windows couldn't start. I went to the self repair tool.It tool like 4 hours to fix the issue. Then it said, that windows will start normally after that. What a lie. After the starting screen I got the black screen, just with the mouse. I tried everything I know, scanning the disk surface with other computer, I used the windows 7 installation CD. And that told me it couldn't find any issue starting windows. What can I try now? This happens evenwhen I boot normally or in any safe mode.
View 3 Replies View RelatedMy Asus G73-JH laptop is currently freezing at the Windows Starting screen. I've read a lot of other forum posts that feature the same problem, BUT there is artifacting (bunch of colored dots) on the top of this screen that goes across the "Starting Windows" screen in a sort of horizontal line. Sometimes it just goes straight to the "Windows has failed to startup" screen. None of the System Recovery Options from the Startup Tool seem they've all been triedTrying to boot in safe mode doesn't work either, as after it starts to load the files, the artifacting appears on the top again after about the third file and it freezes.
I have not made ANY major changes to anything on the system for over two months prior. Because of the artifacting seen, I imagine the video card is fried or malfunctioning. I called Asus and all they suggested to me so far was to reformat, because apparently they think its a driver issue, but I'd like to consider myself fairly tech savvy and believe that there has got to be a better solution that does not involve reformatting the hard drive, as I had a lot of important data that had been stored and not backed up the previous night before the unexpected freezing.The only things I seem to have access to is BIOS and the Startup Tool. I have a System Recovery Disc too, and am curious if there is a solution to this problem (I am not well versed in BIOS), and (assuming the video card is shot) if there would be a way I can access by data and possibly back it up before reformatting so
My system opened with a red screen and I havent been able to get passed that screen. I tried to reinstall my windows 7 install disk, but all it did was keep getting to the make user name and password screen and from there just started over with the loading files screen. It would never complete the install.
View 1 Replies View RelatedI started to install windows and someone messed with it half way. So I started again. Now when I install it it does the set up, get to 100% restarts and then takes me back to the beginning where I have to choose my country and choose install etc.
There is nothing wrong with the USB I'm using because I've installed several other computers with it (I work at a school).
This computer was sent away to be fixed (new hard drive). Or should I install a different OS and clear the hard drive then install Windows again? this hasn't happened before and I've installed Windows 7 successfully hundreds of times.
I am with a friend re-installing Windows 7 on his laptop. Unfortunately the laptop had been infected beyond repair by a virus/malware and would not boot past bios. When installing Windows 7 x32, I make it to the "Setup is starting..." screen and it does not continue. It is not the disk as I have used the same one to install it on my laptop. The laptop is a Dell Inspiron 1545 with 4gb of ram and 500gb HDD space.
View 14 Replies View RelatedA while ago i dual booted windows 7 onto my vista running laptop and it works perfectly. It is a huge improvement on vista, it is faster, better designed and its new features are very useful. Because of this success I know am trying to dual boot it onto my xp running desktop. Unfortunately it doesn't seem to like it.
I have used the same technique that i did on my laptop to install it. I have burnt the iso file onto a disk and run that disk while the computer is running. Checked for online updates and done a clean install. The installation works fine and quite quickly until it comes to the first restart. It restarts and I select "windows setup" on the bios screen as apposed to "an earlier version of windows" which is my xp partition.
It then changes to the starting windows screen that happens just like on my laptop, except the windows logo never materializes and it stays as a black screen with the words "starting windows" on it. i have left the computer on overnight and no change. I have tried reinstalling several times with no luck, both using the same method as before and booting from the disk at startup. Although when I boot from the disk it just skips straight to the same frozen windows startup screen.
I have downloaded the windows 7 adviser software but the program cant seem to make its mind up. Sometimes it announces that my graphics card cant run windows 7 aero and sometimes its fine. I have checked the windows 7 specs and my graphics card appears to meet all the requirements, both dedicated memory and direct x 9 support.
Here are my pc specs:
Dell dimension 5150
XP professional sp3
3ghz intel pentium 4
5 gb RAM
Radeon x300 SE 128mb hypermemory
direct x 9.0
creative SB live! 24-bit
160gb maxator SATA HDD
I am using Windows 7 Pro on a Dell Inspiron 1520. Today, when I attempted to start the unit, I heard a rapid beeping that was uncontrollable until I clicked the Control Key. There are no error messages. I have done 2 cold boots and a memory diagnostic (which found no errors) with no positive results. It begins right when the screen indicates it is Starting Windows. Once I get past that, it seems to operate normally, but I am concerned there is a root problem that will surface with disastrous results at a later time.
View 5 Replies View RelatedI have an MSI a6205 laptop, and have recently reformatted my computer to reset everything in it. My problem is this: Ever since I re-installed Windows 7 my computer has been starting up, getting to the little 'Starting Windows' animation, then the screen turns off completely, with no back light (the fans and LEDs still function perfectly). The way I have been getting it to work is by turning it on, waiting for the screen to turn off, then tapping the power button and putting it to sleep, after a few seconds I hit the power button again to awake it, and the screen turns on and functions perfectly.
I know this isn't a hardware issue, because I also have Ubuntu 12.04 installed on the machine, and it works perfectly. It's just Windows 7 that is giving me this problem.
When windows updates, it then reboots, and just hangs on the 'starting windows' screen. Only after it updates, works fine before. I've re-installed it many times, but get the same result. This never used to happen until i did this fresh installation today. Now it happens every time, just after it installs some standard updates, it wont boot up..
View 1 Replies View Related