Artifacts On Top Of Starting Windows 7 Screen, Freezing?
Jan 10, 2012
My Asus G73-JH laptop is currently freezing at the Windows Starting screen. I've read a lot of other forum posts that feature the same problem, BUT there is artifacting (bunch of colored dots) on the top of this screen that goes across the "Starting Windows" screen in a sort of horizontal line. Sometimes it just goes straight to the "Windows has failed to startup" screen. None of the System Recovery Options from the Startup Tool seem they've all been triedTrying to boot in safe mode doesn't work either, as after it starts to load the files, the artifacting appears on the top again after about the third file and it freezes.
I have not made ANY major changes to anything on the system for over two months prior. Because of the artifacting seen, I imagine the video card is fried or malfunctioning. I called Asus and all they suggested to me so far was to reformat, because apparently they think its a driver issue, but I'd like to consider myself fairly tech savvy and believe that there has got to be a better solution that does not involve reformatting the hard drive, as I had a lot of important data that had been stored and not backed up the previous night before the unexpected freezing.The only things I seem to have access to is BIOS and the Startup Tool. I have a System Recovery Disc too, and am curious if there is a solution to this problem (I am not well versed in BIOS), and (assuming the video card is shot) if there would be a way I can access by data and possibly back it up before reformatting so
View 3 Replies
ADVERTISEMENT
Jan 9, 2012
My Asus G73-JH laptop is currently freezing at the Windows Starting screen. I've read a lot of other forum posts that feature the same problem, BUT there is artifacting (bunch of colored dots) on the top of this screen that goes across the "Starting Windows" screen in a sort of horizontal line. Sometimes it just goes straight to the "Windows has failed to startup" screen. None of the System Recovery Options from the Startup Tool seem to help fix the problem, they've all been tried. Trying to boot in safe mode doesn't work either, as after it starts to load the files, the artifacting appears on the top again after about the third file and it freezes.
I have not made ANY major changes to anything on the system for over two months prior. Because of the artifacting seen, I imagine the video card is fried or malfunctioning. I called Asus and all they suggested to me so far was to reformat, because apparently they think its a driver issue, but I'd like to consider myself fairly tech savvy and believe that there has got to be a better solution that does not involve reformatting the hard drive, as I had a lot of important data that had been stored and not backed up the previous night before the unexpected freezing. The only things I seem to have access to is BIOS and the Startup Tool. I have a System Recovery Disc too, and am curious if there is a solution to this problem (I am not well versed in BIOS), and (assuming the video card is shot) if there would be a way I can access by data and possibly back it up before reformatting so I can persuade Asus support that my card is in fact shot so I can send it in for a replacement!
View 1 Replies
View Related
Jun 17, 2012
So i just built a new rig i got everything hooked up and i installed windows 7 ultimate x64. Here are the details.
Intel i7-3820 3.6ghz
Asrock X79 Extreme9
RAM G Skill 4x4gb ddr3
EVGA geforce gtx 680 2gb
Corsair HX 850
rosewill rnx-n250pce wireless network adapter
I got all the motherboard drivers and the video drivers installed then when i installed the drivers for my wireless network card and restarted and it froze on the starting windows screen.
I've been trying everything i can think of to fix this. I pulled the extra memory out, switched the power supply with one from another rig, switched the hard drive out for another one that i had.
after that, since it was a fresh build and nothing was saved on it i tried to reformat the hard drive and re-install windows, but the install disc also freezes on the starting windows screen.
so now i can't get it boot normally, in safe mode, from the disc or from another hard drive. when i try and boot in safe mode it stops at ClassPNP.sys
View 2 Replies
View Related
Aug 17, 2012
I recently built my first PC three days ago...
Specs:
i7 bloomfield 960 processor
4x4 vengeance ram
crosair hx850 PSU
evga x58 ftw3 mobo
hd 6870 radeon graphics xfx
When I first installed windows it started to work just fine but I soon noticed that it would randomly freeze every 15-30 minutes of use, but not on a particular program or anything. I assumed it was drivers so I installed the latest drivers for my GPU and MOBO and keyboard. It seemed fine again until it started crashing again. I ran a GPU burn test and a CPU burn test it passed both. (I tried runing memtest86+ but it froze at like 12%) Then I tried fixing the registry so I downloaded ccleaner and fixed the registry problems. Freezes continued. I finally decided to re install windows so I did and the problems still continued. I am at a loss of what to do and can't think of anything else.
View 2 Replies
View Related
Apr 7, 2012
I have been trying to load Windows 7 on to my computer but it keeps freezing at the Starting windows screen. And it just sits there i left it for a few hours and it did nothing. it is gett me mad, i took out all of my pci cards except my video card, but i left my ram in (6 gigs).
View 5 Replies
View Related
Nov 22, 2012
I am currently trying to fix my friends laptop but nothing seems to work, the problem is that you cannot get past the 'Starting Windows' screen as is freezes every time you boot, according to him this started to occur after an update. I have tried almost every recovery option and nothing seems to work and he doesn't have any restore points. I managed to get windows to boot once after doing a CHKDSK through cmd in advanced recovery options but the following day the error started occurring again and you no longer get to login.
View 1 Replies
View Related
Jul 20, 2012
I have a HP Touchsmart 300-1017 Windows 7 64 bit computer. About a week ago I was trying to clean a virus that was redirecting the links within Google. I was using IOBit and Adaware and figured I would update them while I was at it. So I was in the middle of updating them when I left for work and by the time I got back the computer was frozen. My wife said she pressed Deny when Spybot S&D was asking permission for the programs to make changes to the registry. Anyway, now the computer freezes at the Starting Windows screen. When I try to start in safe mode the last file that loads is ahcix86s.sys then it freezes. I ordered the System Restore CD's from HP they just came in today.I put them in and I go to the boot menu to boot from the CD but it still freezes at the Starting Windows screen.
View 1 Replies
View Related
Jul 29, 2009
When booting, the Windows boot.ini screen does not appear. It goes from my Bios directly to the windows install screen. I want to run in safe mode to check on artifacting (green dots) that started to appear, but I never get the choice. Is there something in 'msconfig/boot' that I need to highlite?
edit: I managed to get into Safe Mode by turning off the computer with Windows 7 running and then restarting. I did not see any artifacts. I rolled back to the previous driver and the artifacts are still there. It might be my video card.
View 3 Replies
View Related
Apr 17, 2009
Sometimes fingernail-sized parts of my screen flicker. Are these called artifacts?
They smooth out when I drag the mouse pointer over them.
My drivers are as new as can be.
View 1 Replies
View Related
Oct 20, 2009
I was playing EVE online yesterday morning, and decided I wanted to see how far my machine could go with forced settings in the Nvidia Control Panel. It crashed after a few minutes and I thought 'Well, thats the limit. I'll turn them down to where they were.' I did, everything worked fine, and I shut the computer off.
Last night, however, I went to boot up the machine and During the initial dell loading screen (the BIOS load screen), There were wierd color glitches all over the place. After this, During the Nvidia RAID controller load screen, there were DOS charecters occuring at random intervals on the screen, interrupting the actual text (and these charecters werent normal charecters, one looked like the Delta symbol).
After Windows began to load (again, with bizarre color glitches), I would get a BSOD attributing the error to nvlddmkm.sys and it was conducting a physical memory dump. It would restart, go into system repair, wouldn't repair, and the loop would continue.
I COULD get into safe mode, however. After doing so, I tried uninstalling nvidia drivers, (and again with driver sweeper), and reinstalling. I would get a dialogue saying that Server Stereo wasn't installed properly.
Going into DXdiag told me that the machine no longer recognized the graphics card (all the fields were blank or listed as N/A under the display tab).
I decided to just go balls out and reformat using the XP disc that came with the computer. Again with the DOS charecters, which made navigating the windows setup screens a real pain (I did them by memory, mostly). As I went to bed, the reformat went, and even THAT screen was plagued by these mysterious charecters. It looked like a 1980s computer virus on my machine!
This morning, I awoke, led the windows installer process through what it needed (all the while enduring the color glitches that plagued safe mode). I left for work this morning while the Horribly designed Dell Installing Applications window was flashing. I'm currently still at work, so I can't provide super detailed explanations, but I hope someone can get me a prognosis.
Things on my list to do are:
Reinstall graphics drivers.
Reseat the Graphics Cards.
Reset CMOS.
Test cards on other machine.
If anyone's encountered this problem and a solution, please please PLEASE tell me. It would save me a great deal of stress and chain-smoking.
View 9 Replies
View Related
Apr 30, 2012
this is the 5th time i've got a pink screen with artifacts, randomly happens over the course of 4 months. this time i got a blue screen following it. last time the display driver corrected itself. i've ran furmark until the temp maxed out with no artifacts or anything. 86 c. times that the pink screen have occurred, once during mw3, once during vlc media player, twice during Internet just at the homepage, and once during windows media player.
windows 7 64 bit
motherboard tf520 a2+
processor amd athlon 64 x2 dual core 3.2 ghz
memory: 4096mb ram
graphics card: geforce gtx 550ti
View 3 Replies
View Related
Jun 1, 2011
Pc keeps freezing within 5-15min of starting. Have to hold down the power button to restart.I have tried running every diagnostic program on my pc. Also virus and malware. Every program says my pc is fine.My pc WORKS IN SAFE MODE.I don't have the disk to reinstall windows and only have 1 date (a few days ago) in my system recovery.I want to cry with frustration and getting sick of running in safe mode. [code]
View 4 Replies
View Related
Oct 17, 2011
I have a Dell Inspiron N7070 icore 5 laptop (17" screen) that I've had for about 10 months. Within the last 2-3 weeks, the computer started having problems starting. At first it happened a couple of times but after kicking into Startup repair (which itself never has repaired the issue) and shutting it down via on/off button, it would eventually come back up. Then it just froze and wouldn't start at all in my home environment. My brother works in IT for an organization and I asked him to take a look at it which he did. He first restored it to it's original state through the Dell Backup program at his house but when I brought it back to my house it immediately froze in the same way (the process starts but just gets hung up). I had an older router (G series) and he suspected that the problem might be related to that but when I got a new router (n series) the same thing happened when he repeated a restore process and brought it back to my house. It did actually reach the user choices a couple times but froze from there when trying to connect to the wireless system. Next he restored it again but this time used a restore image program (Acronis True Image 2012)and once again it worked perfectly at his place. We first took it to a different environment (Panera) to try to do a wireless connect but it got hung up there before it could connect. We did another restore image via Acronis and it worked fine in the Panera.However, when I took it home immediately afterward, it once again got hung up after starting and I had to do another restore image with the Acronis and it worked like a charm after that. When I turned it on this morning, it froze once again while starting and I once again proceeded to do another restore image with the Acronis program and it worked fine. What is going on here....why does it keep freezing in different environment or after certain durations of time? Is there some problem with Windows 7 when it initially tries to connect or is it something else perhaps corruption in the drivers? I also should state that we ran Malware Bytes and it was clean after it was restored. In addition, I should also mention that almost from the beginning this laptop had a tendency to freeze at certain times usually if left unattended for awhile (while still on) or when put in sleep or hibernation mode but until recently (as stated above) it never froze when starting up. Could there be a connection between all these glitches noticed from the start?
View 3 Replies
View Related
Jan 24, 2012
I've been using my PC fine for the last 3 years. A month or so ago I updated to Windows 7 Ultimate x64. That too has been running fine, then today, after about 3-4 hours of use, in the middle of a game, my PC screen suddenly got weird wavy lines and colours all over it and crashed. Long story short this has now happened about 10 times. Interestingly, I thought it was a graphics card problem, so I tried it on my HD TV (both TV and monitor connected via HDMI) and it did it on the TV too. I then uninstalled the nvidia (8800gt) drivers and restarted my PC. It works fine in safe mode, and in normal mode, but I can't change my resolution to 1680x1050, (it's native resolution) without installing the nvidia drivers.
I don't know if the problem is the drivers, (but never had an issue before?) or with resolution, (monitor problem?) Every time I do install the nvidia drivers the PC restarts normally, screen looks fine, and the PC seems to run, until I click on anything with the mouse and then the wavy lines and weird colours appear again and I can't CTL-ALT-DEL, I have to hard reset it every time. Once I left it for 5 mins. and moved the mouse a little every min. or so and that was OK, but as soon as I click on anything, it freezes and artifacts again. Also, my antivirus flashed red a few times and so did the windows clock in the bottom right corner of the screen, (very odd!) when the PC first starts windows.
That made me think it could be a virus, (even though I'm very careful about what I DL), but I had Avast run through a deep clean check and it found nothing. I also tried to get Win 7 to repair itself, which did nothing either! I've tried reinstalling the drivers, using newer and older nvidia drivers and I've tried to install my HG216 monitor driver, but since it's a few years old there is no official Win 7 support and all I have is an inf. file I can't install on Win 7. I haven't included a dump file, I know a fair amount about computers but I haven't worked out how to do that yet. Also, since I have to hard reboot everytime, in my event view the only errors listed seem to be about 'power failure', so I don't know if the bug or whatever would show up in the dump file?
View 9 Replies
View Related
Jan 12, 2012
I've got a: Presario CQ62 notebook pc with a AMD Athlon(tm) II P320 Dual Core processor, and I can't get past the start up screen with the "starting windows" animation. It will show part of the animation then simply hang. I have a very bad battery but am keeping the computer plugged in. When I attempt a system recovery it says: "A disk read error occurred press ctrl+alt+del to restart" I've tried this many times and I get the same message each time. Beyond that I have no idea what to try.
View 2 Replies
View Related
Aug 13, 2012
I seem to have a odd issue with my laptop. Sometimes when i boot into windows there would be a blank screen with a mouse cursor after the starting windows screen. I would have to wait for approximately 5 minutes for it to show up my logon screen. I've been having this issue since the start of the year and have attempted to solve it but they have been unsuccessful. Things i've tried:Reformat Windows (Did it 4 times)Purchasing a SSDReduced the start-up items(barely any)?
View 14 Replies
View Related
Sep 26, 2009
Is there a way to change the background image that displays during boot before it gets to the login screen?
View 5 Replies
View Related
Sep 11, 2012
Doing a Normal startup, or booting from the Windows 7 cd it will get so far as the Starting Windows screen, the Microsoft copy-write shows up briefly greyed out some, and just sits there. In Safe Mode, it loads everything seemingly, lastly avgidsha.sys, then sits on Please wait...I have narrowed it down to hot the HDD or memory. I've put another HDD with Windows 7 on it, getting the same results. The MemTest 86+ cd actually loads and runs, came up 100% with no errors. Other suggestions that I have found use bootable CDs that want to start Windows first.The Windows 7 CD, Windows Defender Offline, Windows Recovery disk all get stuck at the same place as the HDD, the Starting Windows screen
View 8 Replies
View Related
Dec 24, 2012
My computer was working fine yesterday. I didn't shut it down, but hibernated it. And went to sleep before it was fully hibernated. When i woke up, it was still on and the desktop was black. I tried to restart, But the desktop is still black saying "no analog input". But the processor is still running with beep sound and lights on. I tried changing the cable, unplugging everything and pressing on the power button for few seconds but no use.
View 5 Replies
View Related
Nov 15, 2009
I am running a Linux OS right now and am trying to install windows 7.
I turn on he computer and run off the disc. It let's
me load off the cd but can't get past the starting windows screen. Above the
starting windows is a spot of color but no other graphic.
What do I do from here?
View 5 Replies
View Related
Mar 27, 2011
Regardless of what I choose, it goes to the "Starting Windows" screen, and shows the Win7 animation, then it shows a black screen with just a mouse cursor I can move around, but nothing after that. Normally it shows the Win7 login screen. Ctrl + Alt + Del does nothing.I've tried powering off the tower entirely and unplugging and then powering back on, but I always get the same Safe Mode prompt, and the same black screen.
View 7 Replies
View Related
Jan 18, 2010
I have installed WIN 7 64 and it has developed a problem..It wont boot to the desk top. It will post and go to the starting Windows screen and stops there..It wont go to safe mode.Is there a way to make a boot disk to get it to start or any kind of a diagnostic disk that a dummy can do?
View 7 Replies
View Related
Jul 20, 2012
When ever I turn my computer on it is always stuck on the Starting Windows screen and when I try and do it in safe mode it works but was I am signed in all that shows up is a black screen with Safe Mode in each corner. I have also tried start up repair but it says it can not find a problem or it will just continually search for a problem (waited 4 hours then I just turned it off)
View 7 Replies
View Related
Dec 4, 2012
I made a new PC and powered it up, first I received an error 'CPU FAN ERROR' then I went into bios and deactivated fan control. From their onwards I have been encountering blue screen during starting windows. The copy of windows 7 is pirated.. just to mention.
View 2 Replies
View Related
Feb 13, 2011
upgrade from xp to windows 7. Custom clean install. All went fine, Restarted windows,Login entered pword ok Screen goes to welcome and freezes. Unable to do anything atall. Also unable to start in safe mode.
View 5 Replies
View Related
May 3, 2012
Blue screen and freezing. This is happening frequently but never has any regularity to it. Sometimes happens after a couple of days and sometimes after a couple of minutes. Also sometimes with only one browser window open and sometimes with 15 or more. Happens with both chrome and firefox. Has not happened with other programs as this lapy only gets used for surfing/email/forums etc. Sometimes happens while the computer is sitting idle right after boot. Very strange.
View 3 Replies
View Related
Jun 11, 2012
Upon start-up, two options are given: "Start Windows Normally" or "Launch Startup Repair (recommended)".If the Start Windows Normally option is chosen, then the starting windows screen comes up and stays. If I launch the startup repair option, then I still can not get the problem fixed.From the Startup Repair Screen however, I can launch command prompt and restore options,a restore is not really an option because I have not set up a restore point in a while.
View 4 Replies
View Related
Jul 7, 2012
While watching a live feed on the internet, it stopped responding, so i held down the power button on my laptop to turn it off with the aim of restarting it. Unfortunatley now it won't restart and freezes no the 'starting windows' page. I have tried safe mode with networking, restaring at last known good configuration, booting from cd and repairing but nothing has worked.
View 9 Replies
View Related
Dec 26, 2012
I recently purchased a Dell XPS 15 (l521x) that came with Windows 8. The system boots from the hard drive through UEFI by default, so I think the hard drive is already GPT. I am attempting to install Windows 7 from a UEFI bootable USB. The system goes through the 'copying files' phase and then goes to the Starting Windows screen. As the colored dots of the Windows logo are circling, the system freezes. Can someone help me fix this problem? The following are the steps I took in order to install Windows 7:
- Formatted a brand new 4GB USB drive to FAT32
- Downloaded Windows 7 ISO (I have a key)
- Extracted ISO files to USB
- Made adjustments so that USB is UEFI bootable (efi/boot/bootx64.efi)
- In BIOS, set SATA Operation to AHCI and disabled Secure Boot
- Select USB drive from UEFI boot menu
View 9 Replies
View Related
Oct 23, 2009
i created a partition and formatted it of 70gb to install windows 7 in it. Im obviously using the clean install method, everything goes fine. It expands the files, it installs them,copies them, etc. When my system is booting up, it shows me the screen of windows below saying "windows is starting up", the problem is that windows never starts up, i left it for a night, and it didnt start up, it just stayed there. Im trying to install windows 7 64bit, any help would be greatly appreciated.
View 9 Replies
View Related
Nov 17, 2009
When I run the Windows 7 Home Premium OEM disc I get past "loading files" and then freeze on "starting windows". I see 4 little colored balls in the center of the screen (guessing the start of the MSFT logo) and then everything freezes.
Here's what I've got:
Monitor: Samsung T260HD 25.5in Rose/Black LCD w/ATSC
HDD: 2 x Seagate 1.5TB Serial ATA HD 7200/32MB/SATA-3G
Memory: Corsair Dominator 6144MB PC12800 DDR3 1600MHz (3x2)
DVD: LG 22X DVDRW SATA
Motherboard: ASUS P6TD Deluxe Intel X58 Socket LGA1366 MB
Power Supply: Corsair 950w 80 Plus Power Supply
GPU: 5850 is backordered, so am using an old Nvidia 6600 GT to attempt to install Windows - connected to monitor with DVI cable
OS: Windows 7 Home Premium OEM
I've done lots of research and tried:
1. Using a PS2 keyboard/mouse
2. Disabling USB in bios
3. Disabling just about everything else in bios
4. Tried w/ 2MB, 4MB and 6MB ram
Any help or suggestions would be greatly appreciated.
View 33 Replies
View Related
