Radeon HD 3850 AGP, Driver Doesn't Work.
Jan 3, 2010
I have Radeon HD 3850 AGP and Windows 7, and I tried to do almost everything .I installed 9.12 drivers, 9.12 drivers with adding CL_91526 from the topic above), 9.11 drivers,9.11 drivers with Hotfix (ATI), 9.11 drivers with adding CL_91526, manual driver install by right click.Absolutely no changes and everytime the same ... During and after installing (before reboot) no changes in Device Manager, having "ATI Radeon 3850 " (or "ATI Radeon 3800 series" or something like that...) with yellow triangle and Microsoft Co. driver. And after reboot no changes with it, an error message with something like "Driver didn't install correctly, please install proper driver" ( though in ATI install log you can see that everything was installed succesfully). So after reboot I still see my VGA like "ATI Radeon 3800 series" with Microsoft driver and of course no changes in monitor resolution and all. If I try to delete microsoft driver (and device), and then install radeon drivers , during installation I absolutely just don't have any VGA in Device manager. And after reboot Windows 7 "finds" VGA and install from internet microsoft driver, so I can see "ATI Radeon HD 3850 (Microsoft Corporation WDDM 1.1)" in Device Manager.
View 7 Replies
ADVERTISEMENT
Aug 2, 2012
just purchased a new Pentium 4 3.4 GHz 32-bit processor with HyperTransport technology and a new AGP HIS ATI Radeon HD 4670 with IceQ and 1GB DDR3 RAM packed in a green and black box with this serial number H467QS1GHA. I also installed a new Windows 7 32-bit. I installed the drivers from the HIS CD that was packed with the graphics card but when I start up Windows I can't play any 3D games. Also a message from ATI Catalyst Control Center pops up saying that I don't have an ATI driver or the ATI driver is not working properly.I got these error mesages (I listed the games too)
View 16 Replies
View Related
Feb 25, 2012
I recently got a ATI 3850 for my PC, i set everything up and i come to install the CCC & Driver i get an error message which says Failed To Load Detection Driver when i boot my PC in safe mode the monitor is clear which is normal but when i boot it normally (Windows 7 64 Home) i get lines going horizontal across my screen.
View 8 Replies
View Related
Dec 10, 2009
My m'board is Gigabyte GA-K8U-939 with Athlon X2 2.6 GHz and 3GB DDR. Windows 7 x64 detected the card but had an yellow symbol with the status code 43. Aero could not be enabled because of that. A poster torrentg seems to have sorted out this particular issue for a lot of people. I tried all his suggestions but the code 43 exists.
View 9 Replies
View Related
May 20, 2012
I have a HP laptop on which there are 2 GPU`s one Intel 3000 and a Radeon HD 6490 M. At first I had a problem setting my Radeon GPU as main GPU. Because Radeon is more powerful I want it as primary but when i deactivate the Intel the screen gets all low-res and i cant change it up. On the other side, when i only disable the Radeon, the screen is still perfect. I have checked in game settings on differnt games and the GPU used is the Intel 3000 I wanted and still want to have Radeon as primary cuz of gaming. I still cant set the Radeon as primary.Installing new drivers from the AMD website doesnt work eighter. All i get is a catalyst with almost no options (2 mb). And when I start my laptop I always get as message reading: "the catalyst driver is not supported by the driver version of your enabled graphics adapter. please update your AMD graphics driver. or enable your AMD adapter using the Display Manager" W.T.F it is enabled in Display Maneger.
View 2 Replies
View Related
Sep 30, 2009
I recently installed Windows 7 (64 bit) on my computer and I have yet to get working drivers for my Poworcolor 3850 AGP card. I've tried all the Catalyst suites, inlcuding those with hotfixes. I've tried manually installing multiple drivers through the Device Manager and still no dice. Everything else hardware wise runs just fine. Any ideas?
View 7 Replies
View Related
Oct 11, 2009
I have a Sapphire Radeon HD3850 AGP card in my system but windows will not install the driver from the latest release of the ATI Catalyst driver install. Instead it defaults to the Standard VGA
From what i have read on these forums i may need to change some information the CH87739.inf file for the driver.
I see a memeber called torrentg had posted a modified .inf file but the download limit has been reached. Is there any chance of posting again? Or perhaps positing its contents into the replay.
View 9 Replies
View Related
Aug 28, 2011
problem with my W-LAN device. Recently I�ve got a strange feeling about it because some things didn�t work correctly, so I decided to reinstall the driver. It didn�t work directly (I don�t know why), so I tried to uninstall it first, to install it again. Now I got this message: This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)An update for the latest driver was useless because I already got the latest one. I tried both installing it from the device manager several times, which failed everytime with this message to come, and by the driver setup (there is a folder available on my computer with all drivers installed on it), which seemed not to have any effect, although it said "Installation complete".
View 6 Replies
View Related
Nov 9, 2009
I'm running the german version of Windows 7 x64, so here is the original message I get when I click on "USB" in the menu-bar:
"Der für die USB-Funktionalität erforderliche Virtualisierungstreiber funktioniert nicht."
It's something like this in english:
"The driver necessary for the SUB-functionality doesn't work."
The problem appeared after I installed VMWare if I remember right (didn't use XP-Mode for a while). It worked well before.
All other features, like the integration features, work well.
I uninstalled VMWare and reinstalled XP-mode but it didn't help.
Any hints?
Edit: SecurAble said "Yes" to the given features
View 1 Replies
View Related
Dec 2, 2012
I just upgraded to Windows 7 but I got a serious problem: I can't hear sounds.I've downloaded many driver but it was useless, my sound card isn't installed.
View 3 Replies
View Related
Nov 28, 2009
My Canon ip3000 printer driver doesn't work in Windows 7. The Canon site doesn't specify a suitable driver.Is there any way I can get my printer operational?
View 16 Replies
View Related
Mar 13, 2012
Windows Doesnt recognize my video card Ati radeon 5650 HD, it just says stantard video card for windows, neither my monitor its recognice....
I installed the driver many times , My pc is SONY VAIO Vpcef2s1e , i even downloaded the driver from sony site and still doesnt work...
My windwos is URALSOFT WINDOWS 7 ULTIMATE x64
View 2 Replies
View Related
Nov 29, 2011
i have a sapphire HD 5770 a little over a yr now and recently it started giving problems and now it does not wrk most of the time. what happens is that when the computer is turned on the card starts up (the lights on the back of the card light up green and soon after they start to flicker and turn off and the fan spins really fast and loud as if there is no six pin power connector in the card. i gave it to a friend to check it for me and it wrked in his system for about 4 days str8 the started to chip off.
View 3 Replies
View Related
Jan 5, 2012
I installed a radeon gigabyte 6850 graphics card in to my computer a long time ago and after I made the switch from Nvidia to Radeon my input jacks and output jacks stopped working. Usually I can live with it and use my laptop or phone for skype but I've just bought a game on steam and I can't use steam voice chat on a different system then play on my gaming system at the same time and playing games with my friends without voice chat is unacceptable.When I plug a mic in it says its working and it shows up in realtek hd audio but when i try to use it with anything it doesnt work. The bar doesnt even go up when i test it in windows 7 so it must be muted. I've tested the mic with a laptop before so it definitely works. I've reinstalled realtek hd drivers. I think the problem is I'm using hdmi to connect my tv and use it as a monitor and apparently using hdmi sound from amd cards mute all other sounds. I need the speakers on my tv as they are my only speakers, and buying new speakers or a sound card is not a possible option right now. And even if I could get speakers, my tv only connects via hdmi anyway so the sound would still be muted so I really need this fix. how I can get windows 7 sound to work while using hdmi from a radeon graphics card to output sound to my speakers? Does anyone use hdmi to connect their display to an amd graphics card?
View 4 Replies
View Related
Jul 20, 2009
I have a Satellite 215 A4747 laptop with Vista, which has the Radeon x1200 video card.
Now it may be the fact that I installed the 64 bit version of Windows 7 and the card just does not have the driver support for it, but I spent 2 hours trying different things and it will not take. I am going to try the 32 bit version tonight and see if I have better luck. I reinstalled Vista in the interim, but not happy with vista.
View 2 Replies
View Related
Jan 22, 2013
Does Aero Glass work on ATI radeon 9250 256MB?
View 1 Replies
View Related
Nov 6, 2009
the latest update driver is Vista, and it says I won't update it anymore, at least thats what I think, you can go look to the site and look for yourself. And so thats what I did, but since this is not Vista, it makes the wallpaper black and stays that way, but when i restart it, it screen gets messy, and I had to System Restore. My Question is, is there anyway to make the graphic card work on Windows 7, at least this one?
View 9 Replies
View Related
Jul 9, 2009
My story is simple, I bought a Sapphire HD 3850 512mb DDR3 !AGP! and i want 9.6 catalyst drivers installed NOW!
Well, I had to manually install the drivers first. So make sure your drivers are already extracted to your c: or w/e.
www.otleague.net/stuff/9.6_32_bit_hotfix.zip
This link will take you to my Problem Step Recorded (psr.exe) movie of how I got my drivers from the 9.6 Catalyst.
After I restarted I than installed the CCC from the C:atiSupport9-6_agp-hotfix_vista32_dd_cccSetup.exe. (hotfixs are for AGP cards only) You can use the setup know beacuse it doesn't need to install your drivers And boom I hope it works for you, like it has for me.
It took me close to a week of trail and error to get this answer.
View 7 Replies
View Related
May 7, 2009
I downloaded and installed Win7 RC just last night and found great difficulty installing the video driver. I wiped the drive and did a clean install. I made sure to download the current Win 7 Beta driver from ATI's web site with the same results as elvispresley; The driver doesn't install and windows says it didn't install correctly.
This I repeated several times removing the driver and trying to reinstall. I downloaded the Vista 32 driver and had the same problem. Then I went so far as to attempt updating the driver in the device manager and pointing to where the driver was and windows 7 still could not see it and could not install it. I don't get it. Any help?
View 8 Replies
View Related
Nov 3, 2009
Instructions for installing ATI HD 2400 PRO AGP, ATI HD 3850 AGP, ATI HD 3650 AGP, ATI HD 3450 AGP, ATI HD 4650 AGP, ATI HD 2600 PRO AGP
ALL MODELS x86 32-bit WDDM 1.1:
1) Download the Catalyst 9.11 32-bit driver Suite for Windows 7 from here - Drivers & Support | GAME.AMD.COM - Click on
ATI Radeon™ Video Card Drivers
2) Extract the driver folder by running the .exe you downloaded. It will extract to C:ATI
3) Close installer after extraction. No longer necessary. Do not continue with install here.
4) Download my attachment (CL_91526.rar) and extract the .inf file from it. Save to desktop or anywhere you want.
5) Copy and paste the CL_91526.inf you just extracted directly overwriting the original at this location - C:ATISupport9-11_vista32_win7_32_dd_ccc_wdm_enuDriverPackagesDriversDisplayW7_INF
6) Go to device manager and right click on your video card. (Standard VGA or otherwise.) Update driver software, browse my computer, let me pick, have disk, browse.
7) Navigate to C:ATISupport9-11_vista32_win7_32_dd_ccc_wdm_enuDriverPackagesDriversDisplayW7_INF
8) Click (or double click) on the CL_91526.inf
9) Click ok, then click next and let it install. If it complains that it is not signed, click the part to let it install anyway.
10) Reboot if necessary. Pick an Aero theme by right clicking on desktop, Personalize. (If you previously had a working driver from ATI's site installed, you may skip this step.)
11) Run setup.exe in C:ATISupport9-11_vista32_win7_32_dd_ccc_wdm_enuDriver
and let it complete to install the CCC, should you want the functionality. Custom mode is best used here instead of express mode, when it asks.
12) Install ATI Tray Tools (attsetup.rar in my attachments) if you wish to overclock. Ensure adequate cooling. Disclaimer - Should you choose to overclock, responsibility falls entirely on you.
13) Update your WEI score. Start menu | right click Computer | Properties | click Windows Experience Index
If you have a different AGP card, let me know. I will make you a custom .inf.
View 9 Replies
View Related
Dec 4, 2012
The other day i had a friend delete some programs from my Asus laptop on startup and running processes to make my computer boot up faster. I think we did something that makes the fn key not work anymore. how to restore this functionality?
View 1 Replies
View Related
Jul 7, 2009
I have bought a HP 6730b notebook (type: HP KU216ET), it has got built-in luetooth. I have installed 32bit Windows 7, but the bluetooth doesn't work. I cannot find any driver to make that working good.. HP Compaq 6730b Notebook PC*-* Download drivers and software - HP Business Support Center - here is a driver for XP, but when I install, it said that I have to turn on Bluetooth... I don't know what to do.I don't know what's the type of the built-in Bluetooth, maybe broadcom, I tried this driver: Broadcom.com - Bluetooth Software Download
View 4 Replies
View Related
Dec 21, 2009
I turned of my touch pad using 'FN+F9' and now my 'FN' key is spoilt. Is there away to turn it back on without the 'FN' key?
View 3 Replies
View Related
Jan 7, 2009
Does anybody know of an alternative to macdrive in order to see a hfs+ formatted hard drive?
View 7 Replies
View Related
Nov 13, 2009
i installed windows 7, and everything seemed to work fine.
installed a bunch of programs, they also all seem to work.
but then i decided to do some backups; i created the rescue cd using windows, and then cloned the hard drive also using windows 7.
but then i noticed the backup program, and decided to click on "set up backup"; nothing happens.
if i try the same from a disk drive/properties (ie click on backup there) nothing happens either.
any ideas? maybe something i installed broke this, but it seems like a pretty basic function to break like this.
View 9 Replies
View Related
Jun 28, 2012
Recently, I did a clean install of Windows 7 Home Premium on my MSI GE600. At first, the touchpad behaved the way it should. But now, it is not even detected. I rebooted the laptop and it worked again. Most of the time it doesn�t work though.
I have installed the Elantech driver of the MSI site
View 1 Replies
View Related
Aug 8, 2012
Basically, I bought a new USB stick and plugged it in. My computer would search for windows updates, but it would never find the ones required, and the USB wouldn't install. When I unplug the USB and plug it back in again, the computer doesn't even recognize it, and nothing happens. Currently, my computer is not updated, so that's one thing I won't try. I've installed windows 7 updates numerous times in the past, and every time I did, my computer would have problems starting up (i.e. my desktop would be a black screen when it starts and I can't do anything, or the place where I enter my password to log in doesn't load at all).
View 6 Replies
View Related
Nov 27, 2011
So after installing win 7 ultimate x64, 5.1 surround stopped working and now i can only use my 2 front speakers + sub. In test all speakers don't work aswell.
View 3 Replies
View Related
Feb 24, 2012
I'm unable to play games requiring DirectX 11, even though I've downloaded it perhaps half a dozen times. Having stumped myself I decided I may as well ask here. The only feedback I've received from things not working is Civilization V says "Requires Service Pack 2 or greater" As far as I know DirectX doesn't update in the Service pack format, and that Windows 7 SP2 doesn't exist yet, and shouldn't be needed for a game of early 2010 as-is. I have an ASUS U56E, with the on-board i5 graphics(I thought it might be that, but my brother's i3 runs said DirectX fine, so maybe mine is damaged) and I, quite frankly, do not want to run it back into Best Buy and hope that it's covered by warranty.
View 4 Replies
View Related
Jul 18, 2012
i have already replaced drivers. tried some stuff in the registry and have no access to my dvd/rw drive i have windows 7 internet explorer 8.0 and dell studio 1458. already ran chkdsk
View 1 Replies
View Related
Dec 16, 2012
my computer does not show anything eventhough of connencting the USB or pen drive..what to do ??
View 2 Replies
View Related
