I recently got a ATI 3850 for my PC, i set everything up and i come to install the CCC & Driver i get an error message which says Failed To Load Detection Driver when i boot my PC in safe mode the monitor is clear which is normal but when i boot it normally (Windows 7 64 Home) i get lines going horizontal across my screen.
View 8 RepliesMy m'board is Gigabyte GA-K8U-939 with Athlon X2 2.6 GHz and 3GB DDR. Windows 7 x64 detected the card but had an yellow symbol with the status code 43. Aero could not be enabled because of that. A poster torrentg seems to have sorted out this particular issue for a lot of people. I tried all his suggestions but the code 43 exists.
View 9 Replies View RelatedI have Radeon HD 3850 AGP and Windows 7, and I tried to do almost everything .I installed 9.12 drivers, 9.12 drivers with adding CL_91526 from the topic above), 9.11 drivers,9.11 drivers with Hotfix (ATI), 9.11 drivers with adding CL_91526, manual driver install by right click.Absolutely no changes and everytime the same ... During and after installing (before reboot) no changes in Device Manager, having "ATI Radeon 3850 " (or "ATI Radeon 3800 series" or something like that...) with yellow triangle and Microsoft Co. driver. And after reboot no changes with it, an error message with something like "Driver didn't install correctly, please install proper driver" ( though in ATI install log you can see that everything was installed succesfully). So after reboot I still see my VGA like "ATI Radeon 3800 series" with Microsoft driver and of course no changes in monitor resolution and all. If I try to delete microsoft driver (and device), and then install radeon drivers , during installation I absolutely just don't have any VGA in Device manager. And after reboot Windows 7 "finds" VGA and install from internet microsoft driver, so I can see "ATI Radeon HD 3850 (Microsoft Corporation WDDM 1.1)" in Device Manager.
View 7 Replies View RelatedInstructions for installing ATI HD 2400 PRO AGP, ATI HD 3850 AGP, ATI HD 3650 AGP, ATI HD 3450 AGP, ATI HD 4650 AGP, ATI HD 2600 PRO AGP
ALL MODELS x86 32-bit WDDM 1.1:
1) Download the Catalyst 9.11 32-bit driver Suite for Windows 7 from here - Drivers & Support | GAME.AMD.COM - Click on
ATI Radeon™ Video Card Drivers
2) Extract the driver folder by running the .exe you downloaded. It will extract to C:ATI
3) Close installer after extraction. No longer necessary. Do not continue with install here.
4) Download my attachment (CL_91526.rar) and extract the .inf file from it. Save to desktop or anywhere you want.
5) Copy and paste the CL_91526.inf you just extracted directly overwriting the original at this location - C:ATISupport9-11_vista32_win7_32_dd_ccc_wdm_enuDriverPackagesDriversDisplayW7_INF
6) Go to device manager and right click on your video card. (Standard VGA or otherwise.) Update driver software, browse my computer, let me pick, have disk, browse.
7) Navigate to C:ATISupport9-11_vista32_win7_32_dd_ccc_wdm_enuDriverPackagesDriversDisplayW7_INF
8) Click (or double click) on the CL_91526.inf
9) Click ok, then click next and let it install. If it complains that it is not signed, click the part to let it install anyway.
10) Reboot if necessary. Pick an Aero theme by right clicking on desktop, Personalize. (If you previously had a working driver from ATI's site installed, you may skip this step.)
11) Run setup.exe in C:ATISupport9-11_vista32_win7_32_dd_ccc_wdm_enuDriver
and let it complete to install the CCC, should you want the functionality. Custom mode is best used here instead of express mode, when it asks.
12) Install ATI Tray Tools (attsetup.rar in my attachments) if you wish to overclock. Ensure adequate cooling. Disclaimer - Should you choose to overclock, responsibility falls entirely on you.
13) Update your WEI score. Start menu | right click Computer | Properties | click Windows Experience Index
If you have a different AGP card, let me know. I will make you a custom .inf.
So I had just upgraded my laptop (Dell Inspiron E1505) to Windows 7 and was using the Windows Update to get all the drivers for my hardware. All of them worked except the ATI Mobility Radeon x1300, and when i try to download/install it, it just comes up with unknown error code 80200053. Now my computer is stuck with low resolution and using a generic PnP standard VGA Graphics Adapter driver and I can't find a way to get my video card to work. Any way to install the driver? I tried downloading the driver online, but those versions are not compatible with Windows 7?
View 9 Replies View RelatedMy story is simple, I bought a Sapphire HD 3850 512mb DDR3 !AGP! and i want 9.6 catalyst drivers installed NOW!
Well, I had to manually install the drivers first. So make sure your drivers are already extracted to your c: or w/e.
www.otleague.net/stuff/9.6_32_bit_hotfix.zip
This link will take you to my Problem Step Recorded (psr.exe) movie of how I got my drivers from the 9.6 Catalyst.
After I restarted I than installed the CCC from the C:atiSupport9-6_agp-hotfix_vista32_dd_cccSetup.exe. (hotfixs are for AGP cards only) You can use the setup know beacuse it doesn't need to install your drivers And boom I hope it works for you, like it has for me.
It took me close to a week of trail and error to get this answer.
I downloaded and installed Win7 RC just last night and found great difficulty installing the video driver. I wiped the drive and did a clean install. I made sure to download the current Win 7 Beta driver from ATI's web site with the same results as elvispresley; The driver doesn't install and windows says it didn't install correctly.
This I repeated several times removing the driver and trying to reinstall. I downloaded the Vista 32 driver and had the same problem. Then I went so far as to attempt updating the driver in the device manager and pointing to where the driver was and windows 7 still could not see it and could not install it. I don't get it. Any help?
I recently installed Windows 7 (64 bit) on my computer and I have yet to get working drivers for my Poworcolor 3850 AGP card. I've tried all the Catalyst suites, inlcuding those with hotfixes. I've tried manually installing multiple drivers through the Device Manager and still no dice. Everything else hardware wise runs just fine. Any ideas?
View 7 Replies View RelatedMy new HD 4670 displays a Code 43 at the Device Manager. I installed the latest catalyst version and even the agp hotfix, they don't work. Any suggestions?
Hardware ID's:
PCIVEN_1002&DEV_9495&SUBSYS_00281787&REV_00
PCIVEN_1002&DEV_9495&SUBSYS_00281787
PCIVEN_1002&DEV_9495&CC_030000
PCIVEN_1002&DEV_9495&CC_0300
I have a Sapphire Radeon HD3850 AGP card in my system but windows will not install the driver from the latest release of the ATI Catalyst driver install. Instead it defaults to the Standard VGA
From what i have read on these forums i may need to change some information the CH87739.inf file for the driver.
I see a memeber called torrentg had posted a modified .inf file but the download limit has been reached. Is there any chance of posting again? Or perhaps positing its contents into the replay.
i got the driver but in the task manager still put in display adapter standard vga
View 1 Replies View RelatedI tried to upgrade my graphics card a AMD Radeon 6650M an Acer 5552G, but appeared to me this strange screen: (Photo below).
View 4 Replies View Relatedwhen i installed windows 7 i tried to install drivers ..realtek driver was succesfully installed but when im trying to install video driver in the middle of installation comes out message "the monitor might flicker" or sth like that and than monitor becomes black and than blue screen appears with error and immediately the monitor switchs off with message "out of range 28 khz30 khz"
View 2 Replies View RelatedI'm having a terrible time with this ATI Catalyst driver. Yes, I've read all of the sticky topics and nothing works. I have an HIS Radeon 4350. No drivers downloaded from anywhere work. When I run the install software, it fails after I click the gold "install" button. I get a Windows 7 error report with the same old "DisableSessions" solution, which does absolutely nothing.
It runs, I see the "success" message, I even looked in the registry to make sure the keys were gone. They are and the Catalyst driver still will not install. Yes, I even tried compatibility mode, sadly on the compatibility dropdown, I see "Widows XP SP1" and it's disaabled so I can't change it.
Also, I have no surround sound. Yes, I have the ATI DVI/HDMI adapter. Yes I downloaded and installed the Realtek HDMI driver. It only shows two channels. No clue what's going on there either.
Why is it completely impossible to install any software for this video card? I've tried everything. Haven't I?
any experience with Radeon Mobility 9600 (RV350)?
I get a black screen already right in the beginning (before boot screen) and have no idea how to resolve it. Can't install new driver as I can't even boot Win 7. Can't go into safe mode, as I can't see the menu.
I've installed the provided graphic drivers for my Toshiba Satellite l30 for win XP. the resolution (1200*800) works fine but i canot even use the "standard" colour scheme (i'm using home basic). (it is not even displayed in the options). if i use any graphic dependant software, it would jus hang up and there u go!, The BSOD!
I downloaded the latest wddm supported graphic drivers for my card 2 years ago from microsoft and i stil have them but the thing is i forgot how to replace or update the existing driver. the drivers given by the microsoft is not in an exe form but a bunch of dlls and an inf file in a .cab. i tried updating the driver from device manager but with no sucess. i made it work few months ago but hate myself now that i forgot.
I have a 8500 all in wonder 128 mb card. the machine is win 7. i can install the drivers, but cant seem to get the control center to install. when i do try to install it, the message tells me to install generic card drivers first. i have tried that to no avail.
View 2 Replies View RelatedWith the Mann vs Machine update for Team Fortress 2 coming up, I want to upgrade my drivers.Everytime I try to update my drivers via the official site I get an error message in the middle of installing, it says that a .INF file is missing.So does anyone know how I can update my drivers properly?
View 1 Replies View RelatedI am on an Acer Aspire M5100 desktop that came with Vista 32x preinstalled. I bought a ATI Radeon HD 4550 months ago that worked fine on Vista. I wanted to install Windows 7 64x Home Premium, so I bought a copy through Microsoft, created a boot disk, removed all non-original components (including graphics card), and did a clean install. I installed all my additional hardware and everything worked fine until my graphics card.
When I installed my graphics card, I downloaded the most up to date drivers (I got the link from this site), and rebooted. Upon reboot, my BIOS load, Windows starts to load, and then I get a blue screen. The blue screen flashes by so quick I can't read what they're saying. Then my computer restarts, and we start over again (blue screen cycle).
So I reconnected to the onboard gpu, and it started. Then I went into the Device manager, and uninstalled the old driver. Reinstalled my Radeon 4550, and current drivers, rebooted, nothing. Tried reinstalling windows 7, this time, removing old drivers first, than installing. Still nothing. This happens every time I enable the video card and then reboot.
I'm a noob so I've searched this site up and down. I've heard that maybe I need to update my BIOS. So I went to Acer.com to download the BIOs, and they don't have any listed for my PC.
With that said, I'm at my wits end. If anybody has any thoughts on what to do next, I truly appreciate it.
So I've been using the windows 7 7000 build ever since it came out and its been running just fine on my setup. A couple days ago i downloaded the new RC 7100 build and when i tried to install it, i kept getting a blue screen.
I don't remember why, but i concluded that the issue was my graphics card so i took out my Radeon 4870x2 and took my dad's card, a GeForce 8500 GT. Putting the GeForce in my pc worked and it installed smoothly with both 32bit and 64bit versions of windows 7 RC
I then tried to put my Radeon back into my pc after installing with my geforce. Once it booted i got no signal to the monitor. After finding a work around my i got a blue screen after about 10 min. then it would not boot windows.
I'm still stuck at the installation with my radeon when i put the cd in. i get a blue screen right after the logo thing starts to move, this is before any setup information comes up.
In short, i cant get widows 7 RC to work with my graphics card.
I am having trouble with my Windows 7 Home Premium edition.
After having installed it and starting it up for the first time it wont go further than the "logo" screen.
The only thing i have done is to install the Radeon 4800 series drivers..
There is no error codes or anything and i am running out of possible reasons.
My system was running perfectly with the RC candidate. The first time i even removed my second 4890 and it didn't help anything.
Please someone know what to do. Could it be a corrupted disc i have recieved from amazon?
I recently re-installed windows and am now trying to install the DirectX End-User Runtimes (June 2010). All goes well, it installs everything, but as it finished I get this error: I have tried redownloading, using other installers and updating my graphics drivers. Nothing will work. It's probably worth mentioning that the first time I tried installing, about a week ago, my computer totally froze in the middle of the install and I had to force restart.
View 6 Replies View RelatedI'm working on a client's laptop, compaq Presario CQ57, 2gb ram 250 GB HDD.
I installed a new harddrive and installed a new copy of Win 7 Home Premuim x64 After it reboots, it just hangs in the welcome screen with the Windows logo.
I reboot via Windows 7 repair disc and run C: chkdsk /r and I get this message "disc check error 766f6c756d652e63 3f1"
I'm trying to install Boris FX RED 5 trial on Windows 7 64bit. Each time I try to install it I get the following error message:'Error 1926. Could not set security for file C:Windows. Error: 0. Verify that you have sufficient privilages to modify the security permisions for this file.'I contacted Boris FX who told me it's a Win 7 error. I have an administrators account and UAC is set to off. I've never encountered this installation error before since I installed Win 7 about a year ago.I can't find an '. Error:0.' file or folder. I tried to change permissions on the 'Windows' folder but this wouldn't work.
View 3 Replies View RelatedI was installing windows with a clean install and everything went smooth.
The installation got to "completing installation" and after about 15 minutes, i heared few "beeps" from the computer (not the speakers).
the computer restarted itself and then installed the registery files...
after that, it went to a blue screen with a flower (like in the start of the install) and said: "Starting Services ".
after about a 4 seconds, it said: "The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click OK to restart the computer, and then restart the installation"
when i clicked on "OK" the computer restarted it self and repeat to show the message.
i tried to redownload and reburn but it repeat it self, both 64bit ver. and 32bit ver. so it isnt a corrupted file.
i got no other OS on my computer, because after 4 years my computer started to slow down, so everyone told me to format, so i formated the computer and wanted to install windows 7 so i got no other computer to play games on (im using a old laptop right now).
can anybody help?
I took advantage of the student offer for Windows 7 upgrade!
I downloaded the Windows 7 installer and when I try to run it I get this error.
"We are unable to create or save new files in the folder in which this application was downloaded. Please check the folder properties to make sure that you have security permission on the folder to write files and that the folder is not read-only"
It is saved to the desktop!
Any suggestions?
I'm trying to upgrade my Toshiba (Satellite) Vista to Windows 7 Home Prem. edition.
Everything seemed to be going well until the end and I entered into (any) user account. Windows 7 started to prepare the user account...suddenly I get a IRQL_NOT_LESS_OR_EQUAL error...that's it...no help at all? Restarted and got the error Stop 0x000000A at about same place. Gee's, this was supposed to be a simple install now; stupid MSFT.
I have 2 other computers I wanted to upgrade but now...?
Because I have default windows 7 in my notebook, I have followed your excellent tutorial in Method #2 and almost finish installing XP deluxe version. suddenly! a Blue Screean appear in the display like this… A PROBLEM HAS BEEN DETECTED AND WINDOWS HAS BEEN SHUTDOWN TO PREVENT DAMAGE TO YOUR COMPUTER
IF THIS IS THE FIRST FIND YOU'VE SEEN THIS STOP ERROR SCREEN
RESTART YOUR COMPUTER. IF THIS SCREEN APPEARS AGAIN FOLLOW THESE STEPS.
CHECK FOR VIRUSES YOUR COMPUTER. REMOVE ANY NEWLY INSTALLED HARD DRIVE OR DRIVE CONTROLLERS.
CHECK YOUR HARD DRIVE RUN CHKDSK/F TO CHECK HARD FOR HARD DRIVE CORRUPTION AND RESTART AGAIN COMPUTER.
*** STOP: 0x 000000713 (OXF7802524,0XC00000034, 000000,000000 ).
i have restarted the computer, the display blue screen appear again in the same error,
Whenever I try to install the driver for my onboard sound card(Asrock C-media Ac97) the following error is rendered: I found the driver on this thread: UDA051_build01_Logo51.3_Standard_.rar (PeterBoard's post)
View 2 Replies View RelatedI have been trying to install Impulse but have been encountering the following error that aborts the installation process.
Error
Error getting file security: C:usersLaughingmanDesktop
GetLastError: 5
Is this a problem with impulse not supporting/blocking the install on Windows7, as Ive heard they block some games from windows 7, or is this an unrelated error that needs a different fix?
I have an old Dell XPS Gen2 desktop that is running WinXP. I wipped my Raid0 hard drives to perform the install of Windows7. After helping the setup see my raided hard drives, I started the install.
After the second step in the installation process I keep getting an error message that says something like: "Windows could not configure your computer's boot sequence. The installation could not continue"
Does anyone know what I'm missing? Could my bios be too out of date for this setup? or is it something else?