I recently installed Windows 7 (64 bit) on my computer and I have yet to get working drivers for my Poworcolor 3850 AGP card. I've tried all the Catalyst suites, inlcuding those with hotfixes. I've tried manually installing multiple drivers through the Device Manager and still no dice. Everything else hardware wise runs just fine. Any ideas?
View 7 RepliesI have Radeon HD 3850 AGP and Windows 7, and I tried to do almost everything .I installed 9.12 drivers, 9.12 drivers with adding CL_91526 from the topic above), 9.11 drivers,9.11 drivers with Hotfix (ATI), 9.11 drivers with adding CL_91526, manual driver install by right click.Absolutely no changes and everytime the same ... During and after installing (before reboot) no changes in Device Manager, having "ATI Radeon 3850 " (or "ATI Radeon 3800 series" or something like that...) with yellow triangle and Microsoft Co. driver. And after reboot no changes with it, an error message with something like "Driver didn't install correctly, please install proper driver" ( though in ATI install log you can see that everything was installed succesfully). So after reboot I still see my VGA like "ATI Radeon 3800 series" with Microsoft driver and of course no changes in monitor resolution and all. If I try to delete microsoft driver (and device), and then install radeon drivers , during installation I absolutely just don't have any VGA in Device manager. And after reboot Windows 7 "finds" VGA and install from internet microsoft driver, so I can see "ATI Radeon HD 3850 (Microsoft Corporation WDDM 1.1)" in Device Manager.
View 7 Replies View RelatedI have a Sapphire Radeon HD3850 AGP card in my system but windows will not install the driver from the latest release of the ATI Catalyst driver install. Instead it defaults to the Standard VGA
From what i have read on these forums i may need to change some information the CH87739.inf file for the driver.
I see a memeber called torrentg had posted a modified .inf file but the download limit has been reached. Is there any chance of posting again? Or perhaps positing its contents into the replay.
I booted Windows 7 a few minutes ago, and saw what made me think something might have happened relating to my graphics card. Right before the log-on screen came up, I saw a lot of flickering/static, which I thought was really odd because the PC is connected to the monitor with a digital signal (DVI). The computer froze, at this point and I had to reboot. I'm posting from the same PC, so needless to say the reboot worked.
View 3 Replies View RelatedI have just setup a new computer and windows 7 Aero is not working. I have installed the latest Catalyst drivers 12.10 on the card.
Windows Aero says that my card is not compatible and i need to install another card.
The motherboard is a Gigabyte z77 DH3 and it has an i5 3750 CPU.
I didnīt install the drivers for the onboard GPU. Could be that the problem?
My story is simple, I bought a Sapphire HD 3850 512mb DDR3 !AGP! and i want 9.6 catalyst drivers installed NOW!
Well, I had to manually install the drivers first. So make sure your drivers are already extracted to your c: or w/e.
www.otleague.net/stuff/9.6_32_bit_hotfix.zip
This link will take you to my Problem Step Recorded (psr.exe) movie of how I got my drivers from the 9.6 Catalyst.
After I restarted I than installed the CCC from the C:atiSupport9-6_agp-hotfix_vista32_dd_cccSetup.exe. (hotfixs are for AGP cards only) You can use the setup know beacuse it doesn't need to install your drivers And boom I hope it works for you, like it has for me.
It took me close to a week of trail and error to get this answer.
I downloaded and installed Win7 RC just last night and found great difficulty installing the video driver. I wiped the drive and did a clean install. I made sure to download the current Win 7 Beta driver from ATI's web site with the same results as elvispresley; The driver doesn't install and windows says it didn't install correctly.
This I repeated several times removing the driver and trying to reinstall. I downloaded the Vista 32 driver and had the same problem. Then I went so far as to attempt updating the driver in the device manager and pointing to where the driver was and windows 7 still could not see it and could not install it. I don't get it. Any help?
I recently got a ATI 3850 for my PC, i set everything up and i come to install the CCC & Driver i get an error message which says Failed To Load Detection Driver when i boot my PC in safe mode the monitor is clear which is normal but when i boot it normally (Windows 7 64 Home) i get lines going horizontal across my screen.
View 8 Replies View RelatedInstructions for installing ATI HD 2400 PRO AGP, ATI HD 3850 AGP, ATI HD 3650 AGP, ATI HD 3450 AGP, ATI HD 4650 AGP, ATI HD 2600 PRO AGP
ALL MODELS x86 32-bit WDDM 1.1:
1) Download the Catalyst 9.11 32-bit driver Suite for Windows 7 from here - Drivers & Support | GAME.AMD.COM - Click on
ATI Radeon Video Card Drivers
2) Extract the driver folder by running the .exe you downloaded. It will extract to C:ATI
3) Close installer after extraction. No longer necessary. Do not continue with install here.
4) Download my attachment (CL_91526.rar) and extract the .inf file from it. Save to desktop or anywhere you want.
5) Copy and paste the CL_91526.inf you just extracted directly overwriting the original at this location - C:ATISupport9-11_vista32_win7_32_dd_ccc_wdm_enuDriverPackagesDriversDisplayW7_INF
6) Go to device manager and right click on your video card. (Standard VGA or otherwise.) Update driver software, browse my computer, let me pick, have disk, browse.
7) Navigate to C:ATISupport9-11_vista32_win7_32_dd_ccc_wdm_enuDriverPackagesDriversDisplayW7_INF
8) Click (or double click) on the CL_91526.inf
9) Click ok, then click next and let it install. If it complains that it is not signed, click the part to let it install anyway.
10) Reboot if necessary. Pick an Aero theme by right clicking on desktop, Personalize. (If you previously had a working driver from ATI's site installed, you may skip this step.)
11) Run setup.exe in C:ATISupport9-11_vista32_win7_32_dd_ccc_wdm_enuDriver
and let it complete to install the CCC, should you want the functionality. Custom mode is best used here instead of express mode, when it asks.
12) Install ATI Tray Tools (attsetup.rar in my attachments) if you wish to overclock. Ensure adequate cooling. Disclaimer - Should you choose to overclock, responsibility falls entirely on you.
13) Update your WEI score. Start menu | right click Computer | Properties | click Windows Experience Index
If you have a different AGP card, let me know. I will make you a custom .inf.
My m'board is Gigabyte GA-K8U-939 with Athlon X2 2.6 GHz and 3GB DDR. Windows 7 x64 detected the card but had an yellow symbol with the status code 43. Aero could not be enabled because of that. A poster torrentg seems to have sorted out this particular issue for a lot of people. I tried all his suggestions but the code 43 exists.
View 9 Replies View RelatedOkay so, my laptop's system is unable to boot, so I just tried to format it since I have to do that for a very long time, and when it asked me in which partition I want to install windows there was nothing, although when I clicked "Load Driver" I could access the hard disk's files, the hard disk IS listed in the bios normally but windows does not recognize it, I tried using Kaspersky Rescue disk(the only CD I had along with the recovery disk)and when I used the File Manager, the hard disk still didn't show, are there any drivers I have to install?I have burned both fujitsu9that's my laptop) and Seagate's websites and can't find anything, I have searched forums but the only answers were "check if your hd is listen in bios".So, i IS listed in bios but I can't reinstall windows nor access it
View 1 Replies View Relatedi changed the OS of my laptop from windows7 starter to windows ultimate x64. but i cant connect my laptop to the internet. some drivers are missing. {2 BASE SYSTEM DEVICE DRIVER missing, ETHERNET CONTROLLER DRIVER missing, NETWORK CONTROLLER and VIDEO CONTROLLER DRIVER is also missing.} solve this?i tried to install the ethermet driver i downloaded. but it always shows this error " error:failed to install, no device driver is present to your computer"
View 1 Replies View RelatedI have an Acer Aspire 7741z-4433 with an Intel(R) Pentium(R) p6200 (2.13 GHz, 3MB 1.3 cache). This only happens to me while I am playing The Sims 3. I have the game set on the lowest quality settings, even though my laptop "claims" to be HD LED, etc. This issue still happens. As you may know I cannot replace the graphics card as it is apart of the motherboard, and to buy a new motherboard with a better graphics card would cost more than a new computer. I have been the my manufacture's website and tried installing an update of the graphics card, and that didn't do the trick either. I am at my wits end, and I just want to play the game without it shutting down and freezing my computer. The reason I know the error is because I do Alt + Tab to get back to the desktop. The way it acts up while I am in game is the screen blacks out but I can still see the software's mouse, and then it blinks a couple times and then freezes completely?
View 1 Replies View Relatedi have a problem finding lexmark z715 printer driver to download in my window 7 dell computer.
View 3 Replies View RelatedFree Download Driver Sony Vaio Brightness Driver For Window?
View 1 Replies View Relatedi want toshiba satellite a300 blutooth driver
View 3 Replies View Relatedemachine EL1200, AMD Athlon 64, Boxer 61 MB DA061L, 08120-1, 48.3V801.011. 2GB RAM, SATA HDD. Originally Win Vista but upgraded to Win 7 home premium 32 bit which worked ok. Problem - at boot up the following happens: verifying DMI pool data...update success, boot from CD, bootmgr is missing, press ctrl+alt+del to restart. inserted win 7 CD, installation progresses to stage where i get error message: no drives were found.click load driver to provide a mass storage driver for installation.
View 1 Replies View RelatedI have a brand new Dell XPS8500 running Windows 7 Ultimate x64. When trying to play online games, I keep getting this message:Display driver AMD driver stopped responding and has successfully recovered.The browser (Chrome) freezes up, the screen goes black, the error message pops up, the browser goes completely white and I have to go into task manager and kill it.I tried getting a screen shot but could not.
Intel Core i7-3770 CPU @3.40GHz
16 GB RAM
Automatic install sound driver windows 7 driver in computer?
View 1 Replies View Relatedtrying to install Windows 7 .iso disk image on my macpro Lion.....for using VMware Fusion 4 on my Mac.
View 1 Replies View Relateddownload DELL motherboard driver for sound ,audio vga driver?
View 1 Replies View RelatedDell driver inspiron 1525 windows 7 graphics driver
View 1 Replies View RelatedI just downloaded the Vista driver for my Nvidia 8500GT , and during install, Nvidia shows it as a "Windows 7 32-bit Driver"...
Did this happen now or was I sleeping all this time?
i want to download driver for acer 4736 web cam driver..
View 1 Replies View RelatedI bought a new computer wth window 7 & have been having this problem but the company I bought it is unable to fix it.
View 2 Replies View RelatedAre there any drivers available for downloan for: Iomega driver model MDHD500-U Driver P/N 31641800?
View 2 Replies View Relatedpci device isnt installed
View 1 Replies View Relatedhow can i search the camera driver from driver CD of dell inspiron n5050?
View 1 Replies View Relatedi can't get the correct driver for my W7 and the Twain driver is also unpackaged.
View 1 Replies View RelatedMy camera are upside and downside and get the right driver
View 1 Replies View Relatedmy laptop is hp pavilion g6 notebook pc >> my problem is with the ethernet controller driver and the network contoller driver >> after i had install a windows 64 bit i couldn't find these drivers.
View 8 Replies View Related