Packet Filtering And QoS Rules

Jul 6, 2012

Are there any packet filtering and QoS experts here willing to provide some help with my feeble understanding of such technologies?

View 2 Replies


ADVERTISEMENT

Packet Loss Only In Windows 7, But Not In Xp?

Mar 18, 2012

I have packet loss, and randomly connection loss (but otherwise i have very good pings!) under windows 7 with two different computer with realtek 8111B and 8111E onboard chips. But there is no packet loss under windows xp with the same computers.I tried old, new, and motherboard manufacturer's drivers, new windows 7 system without any antivirus software, disabled windows defender, in safe mode, but still the sameI have no router, just a modem directly plug into the pc.

View 1 Replies View Related

NO PACKET Receive / Can't Browse In Internet

Mar 14, 2011

im having troubled with my acer netbook wireless network connection.i can connect to servers..but i cant browse in the internet. .the notification icons..prompts that i am connected at all.until i view my status.. 650 send packet data but 0 receive??and if i tried to direct into websites.. it will just say "taking too long to respond" or unavailable.i dont know if there was something wrong setting on my network ip or what??

View 2 Replies View Related

Computer Can't Be Turned On With Magic Packet

Sep 22, 2012

I can't enable wake on lan on my computer. First I tried with an on board LAN cart then I added external cart - Intel(R) PRO/1000 GT.In the device manager I checked "Allow this device to wake up the computer" and "Only allow a magic packed to wake up the computer" for the network adapter.In BIOS I enabled the PME Event Wake up property.On my machine I installed a Magic Packect sender/receiver to check whather the packets can reach the computer and I see that the packets are received when I send them from my phone.But when the computer is turned off I can't wake it this way. Also there's light from my LAN cart, so I assume that is has power from the mainboard when the computer is turned off. My mainboard is Gigabyte GA-MA770T-UD3 and the operating system is Windows 7 32bit.

View 2 Replies View Related

Packet Drop After Every 5 Minutes When Firewall Disabled

Dec 5, 2012

I have:
Laptop: Acer TravelMate 5744
CPU: Intel Core i3 M380
OS: Windows 7 Professional Service Pack 1 64 bit
Network Card: Broadcom NetLink
Antivirus: McAfee

From time to time (an average of 5 minutes) I experience a packet drop, whatever host I connect to or I ping. The problem is not related to any network device because the problem does not occur on another PC connected to the same switch. And, more interestingly, the problem does not occur on a Linux virtual machine (VMware) installed on my laptop. The problem occurs even if I disable the firewall or the real time check of the antivirus. So, every clue brings to Windows 7 or the network device driver (that is up to date, though). It's important for me because I have to connect to other machines remotely (and the connection drops).

View 1 Replies View Related

Error In NetGroup Packet Filter Driver

Apr 24, 2011

i can't seem to repair the NetGroup Packet Filter Driver in my laptop.. i'm using windows 7 home basic..when i tried to start it, it says "The system encountered the following error while attempting to start the service. The system cannot find the file specified." i don't have a repair disc

View 2 Replies View Related

What Are The Upgrade Rules ?

Jun 27, 2009

What are the "upgrade" rules? I don't need Windows 7 Professional but sometimes upgrades don't work if you are moving to a package lower on the feature tree. Please let me know if you have a definitive answer or give me a pointer to the correct place to ask.

View 3 Replies View Related

Windows 7 OEM Rules Prior?

Jan 8, 2013

I have a win 7 OEM disk for 32/64 bit and have installed the 32 bit to check it out. As I have not activated the 32 bit am I ok to replace the 32 bit with the 64 bit? Prior to activation can I install the 32/64 on other PC's until I decide which one to activate the copy on?

View 4 Replies View Related

AppLocker - Create New Rules

Apr 25, 2009

How to Create New Rules in Windows 7 AppLocker ?

View 0 Replies View Related

Outlook Rules And New Email Address

Mar 19, 2011

Will all my current rules apply to the mail I receive at present from different people after they have updated there info with my new address? Or will I have to delete the rules and start again as and when I receive the mails? I am thinking probably the latter will apply though.

View 5 Replies View Related

Ie9 In-private Filtering Not Available?

May 1, 2011

I've recently installed Internet Explorer 9.The option to enable inprivate filtering is not present in the safety menu.I've set the FilteringMode option to 1 in the registry entry

HKEY_CURRENT_USERSoftwareMicrosoftInternet ExplorerSafetyPrivacIE

Nothing happens. This is true for the 32-bit and 64-bit versions on my machine.

View 2 Replies View Related

Outlook 2010 - Lost Rules And Alerts

Dec 18, 2012

I recently had a glitch in my Outlook 2010 and had to redo the email accounts, and indicate the appropriate pst file. All is well except that I have lost all the Rules and Alerts. Where are they and how do I get them back?

View 5 Replies View Related

Importing Mail Rules Into WLM After Reinstall Of Windows 7

May 15, 2012

I recently had to reformat my hard drive. Before doing so, I exported all of the registry mail rules and saved them on a flashdrive. Now, after reinstalling Windows and WLM, I am trying to figure out how to get the rules imported/reinstated without having to recreate them all again.

I merged them; i.e. clicked on the registry files I exported and saved prior to the reformat, and they are now in the registry themselves, but what else am I supposed to be doing because when I open WLM, there are no rules.

View 5 Replies View Related

Transfering Message Rules In Live Mail

Nov 8, 2009

I have four Windows 7 machines with Windows Live Mail on each machine. I have been able to transfer my messages and contacts from one machine to another just fine. What I want to do now is transfer the message rules from one machine to all the others.

Does anyone know how to export and import message rules?

View 3 Replies View Related

Website Blocking / Filtering?

Jan 26, 2011

Does anyone know where I can find a piece of software that will allow me to block websites by URL and/or keywords that are applied to specific users/groups. I have to select the user/group this applies to

View 4 Replies View Related

Outlook 2003 Message Rules Don't Work In Win7

Nov 7, 2009

Did a clean install upgrade from XP and installed office 2003. I used a utility called backrex to save and reinstall my office settings. Everything works fine except my message rules do not work. I get an error message similar to unable to move from inbox. I deleted all of my rules and was only able to recreate the ones going through the specified account to a folder.

All other rules attempted produced the rule but the underlined portion that you click and fill out were not underlined so it is impossible to do the rules other than through the specified account.

After finishing each rule I attempted to run the rule in the inbox to sort the emails and that failed and I received the error message unable to move from inbox. I have 47 email accounts for my businesses and for my sanity must use rules. Has anyone else encountered this problem and does anyone know of a solution?

View 1 Replies View Related

Base Filtering Engine Won't Start?

Mar 7, 2012

A few days ago my computer was infected with the trojan HEUR:Backdoor.Win64.Generic (consrv.dll). Kaspersky caught it and removed it but not before it disabled my windows security service, "base filtering engine". I restored the service in the register but it won't start even though it is set to automatic. I think it won't start because the file bfe.dll was corrupted by the virus. I have another copy of the file obtained from a working computer with the same operating system but I cannot replace it because "I don't have permission".

how to replace this protected file or how to get BFE to start?

View 4 Replies View Related

Base Filtering Engine BFE Deleted?

Dec 2, 2011

My BFE service Base Filtering Engine has been deleted by a nasty installer or whatever...how can i manually reinstall the BFE service without a full reinstall ?i don't have any system restore point available (never need this sh##ty feature in the past)Windows 7 x64 BFE service does not appear anymore in the "local service" service has been deleted!

View 4 Replies View Related

How To Do Excel Like Filtering In Open Office

Jun 28, 2012

i am new to open office .. i used excel 2007 earlier.. i like to know is excel 2007 type tick filtering is available on open office.... if yes how to do it..

what is the alternative way to do that kind of filtering in open office

View 7 Replies View Related

Get A Good Internet Filtering Software?

Jun 29, 2012

I Use trend micro as an antivirus Software in my office , I Don't have access to internet filtering option of Trend Micro, But right now there is no Filtering applied to any system...So i am in need of a free internet filtering software something similar to k9webprotection. k9 is a worst software but i need something much better than it...

View 2 Replies View Related

Windows 7 Live Mail Message Rules, Folders Not Showing?

Mar 1, 2010

I am trying to create a message rule in Windows Live Mail Desktop. For example, I want a rule to automatically place any email from Pay Pal, to a folder I created named Pay Pal. But when I chose the option "specified folder", only the Outbox shows up as a list of folder options to move this to.

View 5 Replies View Related

Lost Windows Base Filtering Engine

Apr 12, 2012

Having received a report from Norton error 5013,3, I have now identified that I have lost Windows Base Filtering Engine from my Windows 7 Home X64 system. Can anyone tell me how I can get this back. With previous versions of Windows, you could simply re-install Windows over the top but my install DVD telle me that it is not compatible with what I now have (probably due to all the various updates etc. Is there not a download which could simply restore the lost feature?

View 4 Replies View Related

Website Filtering / Safe List (Windows 7 And IE 9)

Oct 15, 2012

I have family members who aren't very computer savvy but somehow get to the sites they shouldn't have, like to click on links they don't even understand (thus gets infected with viruses etc). I set up a limited windows 7 account for them, browser of choice is IE9, and I need software where I can make list of safe sites they can visit. all other sites should be blocked until added to that list. As I said before they aren't very computer savvy so I don't need something that is hack proof or anything. There is microsoft Family Safety in windows live essentials is that any good for this purpose? Is there any alternatives?

View 1 Replies View Related

Internet Explorer InPrivate Filtering - Turn On Or Off

Mar 22, 2009

How to Turn Windows 7 InPrivate Filtering On or Off ?

View 0 Replies View Related

Rules Menu Does Not Seem To Offer Very Simple Option For Sorting Junk Mail

May 27, 2011

In Windows Live Mail (pop3) I want to create a rule so that if the sender is not in my contacts/address book the email is sent to the Junk Folder.
The Rules menu does not seem to offer this very simple option for sorting junk mail.

View 3 Replies View Related

Inprivate Filtering To Make The Pages Display Correct

Jul 16, 2011

In IE8, do people use it? I find it blocks something on every web page I visit so I'm always seeing the exclamation point. And wondering if it is making the web page not display properly. On a few sites I was able to allow some things to make the pages display correct but then it has to be run with "choose which content to block" which seems basically the same as not running it at all. I couldn't find a lot of info about it. Only how to turn it on or off.

View 2 Replies View Related

Windows 7 64bit - Base Filtering Engine Won't Start

Jul 1, 2012

I've tried re-adding the appropriate reg files. I've tried fixing permissions in the registry. I've tried all the cmd line commands. I have no idea how to get this service to run. Because of this the firewall doesn't work. And also i can't open any ports on my router I'm thinking.I've used ccleaner to fix the errors in my registry, as well as sfc /scannow. I was getting some error when trying to use the Windows 7 installation disc to repair windows so I couldn't do that.I'm also not infected with zero acess rootkit becaue these aren't found on my computer.

Quote: if you find a folder called system64

C:/WINDOWS/SYSTEM64(not the sysWOW64)
and a file called consrv.dll
C:/WINDOWS/SYSTEM32/CONSRV.DLL

You're infected by zero access rootkit.It is recommended to contact malware removal forums to remove it first and try the fix

I've tried this too but to no avail -->
Quote: Download both the registry files
bfe.reg
firewall.reg

[code].....

View 3 Replies View Related

Setup Windows 7 Virtual Wifi With Web Filtering And Speed Limit?

Apr 9, 2011

how to setup this, i want to setup this to people that have access to my virtual wifi will have bandwidth limit in order not have all my internet bandwidth consumes and cannot have access to certain website (eg like Internet, facebook ,my adsl modem web configure page).

View 5 Replies View Related

Cannot Get Internet Videos To Play Without Disabling Active X Filtering In Internet Options

Jan 27, 2013

I'm running Windows 7 Pro 64 Bit with IE 10, cannot get internet videos to play without disabling Active x filtering in internet options?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved