No Image On Boot
Nov 18, 2009
For starters it can't stay on for even a day (it shut downs) and I can't turn it back on. I tried buying a new power supply, a better one, a also better motherboard... didn't work. If someone can help me with that, great, but I can live (barely) with that. My main problem is that the stupid machine now won't even show any image on the monitor when I turn it on. I turn it on, I hear the noise, blablabla, no picture on the monitor. I have Windows7, someone told me it could be the graphics card, someone else told I needed to format it, which I don't want too..
View 9 Replies
ADVERTISEMENT
Jan 7, 2010
i get an error boot image currupt and the system will not boot. i tried to run windows 7 dvd repair screen without any success. I changed the boot sequence from hard drive to cd/dvd. The system does not continue after the error.
View 2 Replies
View Related
Sep 28, 2009
I'm currently running Windows 7 Ultimate x64 (RC). I cannot seem to figure out how I can have the virtual PC I've created boot from an ISO image. It was really simple in VPC2007, so I hope I'm just overlooking something.
Slightly OT, but can anyone who did not actually work on this product explain why it seems to be such a horrible step backwards from VPC2007? It seems to be slower, more complicated, and less-capable in many areas.
View 4 Replies
View Related
Jan 8, 2012
My SSD boot drive died yesterday but I have a recent image. What I don't have is a boot drive right now. I'm probably going to check some prices on SSD's locally later today and pick one up since it turns out the brand I was using isn't very reliable (OCZ Agility 2 60 gig - lasted 3.5 months). Assuming I do pick up a new boot drive how should I proceed? Should I install Windows on my HDD then restore the image to the new SSD or should I install Windows to the SSD and just restore everything but Windows? Or should I be doing something totally different?
View 5 Replies
View Related
Sep 28, 2011
I had a system with programs I have installed and the setup and imaged it with acronis or for any matter, it could have been a perfect clone drive copy because the program isnt the issue. My i5 - 2500k achi windows 7 was imaged to a new hard drive and attempted to run on a AMD Phenom 4x 9500.Now before you go telling me about the three hard drive modes, Raid , IDE and ACHI. I've edited the registry and have tested all three modes to correspond with the motherboard bios setting of the drive. I assume its IDE or ACHI, which I've tried loading windows on the orginal machine, editing the registry settings, then trying it again on another machine.Where I am at now is it goes to classpnp.sys when im watching safe mode and stalls there. Im noticing before it was stalling at disk.sys but i think i fixed that via the registry settings for the hard drive mode.Tried to make a generalized image by using sysprep got the error fatal error because i guess its used more than three times, dont understand what disarm command they are talking about for workaround since the xml file doesnt exist.
I have tried ACRONIS 2011 Image with Universal Settings mode (that is supposed to remove hard ware specific settings)I have also tried using the windows disc, going into launchup repair, repair startup.I also went recovery console, then tried renaming classpnp.sys to classpnp.old.I tried several options using the Ultimate Boot disk but its not the boot up mbr as it boots up , its the loading of one of the system files/drivers that make it fail.The reason why im trying to just clone one hard drive and put it on another system is because, everything is installed, the programs, etc. Its saving me god bloody 2 days with setting up the programs, although Im getting close to over a day trying to figure out whats the big dela with getting this to work on another computer.additional information : I do not need any user specific preferences, documents, files or settings, everything can go, i just want this installation with about 25 gig of programs, to load and work.If you know of a program thats fairly easy to use considering im already one day into doing this, then let me know and tell me what im looking to do and some instructions are great.Either way, im waiting for an answer, will be here next 3 hours.im on skype as well, this user name is spelt backwards for security reasons.
View 11 Replies
View Related
May 10, 2012
I am attempting to restore from a system image, but keep receiving a boot manager error message: Status: 0xc000000e Info: The boot selection failed because a required device is inaccessible
The computer boots no problem normally, it is only when restarting to restore the system image.
View 4 Replies
View Related
Jul 22, 2012
My Dell laptop is saying BOOTMGR image is corrupt. the system cannot boot.
View 3 Replies
View Related
Jul 20, 2012
just moved my uncles HDD to a SSD i finally got it to boot no problem andeverything seems to be back to normal but a new issue has come up.every 5th or 6th time i reboot it gives me the BOOTMGR image is corrupt. The system cannot boot error then after i restart go into the BIOS go save to CMOS the system boots as if nothing happened. so far i have tried: run startup repair run bootrec.exe /fixmbr /fixboot and fix bcd commands x4 strangely it says everything is completed but shows 0 indows installs.reinstalled Win 7 no virues no spyware I'm thinking of maybe changing the CMOS battery.
View 3 Replies
View Related
Apr 29, 2012
SSD boot drive failed after just 5 weeks. It takes me an entire weekend(at least) to reinstall and reset everything. Not to mention lost saved passwords and some other important data that I did not get backed up which leads me to my question. Can I use my Last Windows Image backup to install on the new boot drive and if so how?
View 2 Replies
View Related
Jul 31, 2011
All discussion will pertain to Windows 7 Backup w/ NTFS disks w/ample space. Period. It shouldn't matter if the disks are simple or dynamic. The simple situation is this: I have one simple NTFS boot disk that failed months after system image backups to my other internal HDD. So then I replace this boot disk w/ a new one. So Am I able to restore the system image from the HDD onto to the new boot disk?
View 4 Replies
View Related
Sep 5, 2012
I have an HP Pavilion laptop and used recovery manager to do an image factory restore. Upon reboot it brings up the following message:
Please wait:
updrvltr:unknown
x:windowssystem32
It wants me to enter something at the command prompt. What I need to do?
View 29 Replies
View Related
Jan 11, 2013
I have just replaced the hard drive on my laptop as the original was starting to fail. I created an image of the windows 7 pro 32bit original drive. I replaced the hard drive and installed a clean 64 bit version of windows. I have also installed a clean 32 bit version as a dual boot. I now want to use the original image of the 32 bit system and install this on the clean 32 bit installation.I have tried this using the image software I have (snapshot) but cannot get it to work.
View 2 Replies
View Related
Jun 27, 2011
After restoring my pc from a system image, when windows resarts, it won't boot, & I'm taken to the "startup repair" option screen. After Startup Repair is performed I get the message "Startup Repair Cannot Repair This Computer Automatically" with the following problem details:
Problem Event Name: StartupRepairOffline
Problem Signature 01: 6.1.7600.16385
Problem Signature 02: 6.1.7600.16385
Problem Signature 03: unknown
Problem Signature 04: 52
Problem Signature 05: AutoFailover
Problem Signature 06: 1
Problem Signature 07: BadPatch
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
It says that the root cause found is "A patch is preventing the system from starting" Error code = 0x490.
View 9 Replies
View Related
Jun 29, 2011
I created a system image on an AHCI system, then I replaced the hard drives & re-imaged the system. Now Windows won't boot in AHCI mode, it has to be it IDE mode. Why is it not booting in AHCI mode?
View 5 Replies
View Related
Sep 4, 2011
OS: Windows 7 Home Premium 32 bit The windows system image backed up on my external hard drive (2TB WD USB3) is not showing while restoring the PC from an image.
The only option available is my hard drive partition on which i also had saved a system image. Though windows recommends External hard drive for backing up image when backing up the system.
View 4 Replies
View Related
Aug 24, 2009
I need a little help figuring this out. I made a backup image a while back on my network. Now that I want to re-image, I reboot as requested, wait for it to load, and Windows says it can't find my backup, "if it is on a network, close this window , type the network location."Putting in the network location does nothing, I'm just returned to the screen where it would list the backup image if it had found it, but there's nothing there.Thinking perhaps my NAS was the problem I copied the image onto a portable hard drive, but after rebooting into the restore program, Windows 7 doesn't find the USB drive.
View 9 Replies
View Related
Dec 14, 2012
With either of these two Products, if I create an Image will the Image "include" everything on the Partition?What I'm asking is, in the event I "delete" something from a Partition, and presuming the "deleted" item is not overwritten, will the "deleted" item be part of an Image created AND restorable by Windows or Acronis?
View 7 Replies
View Related
Nov 22, 2009
if i do a back up image of my C drive can i then create a partition on the that HDD and then create a second OS using that image of C drive?
hope that makes sense
also can you update images or would you need to create new ones to keep them upto date?
View 3 Replies
View Related
Apr 15, 2012
I've got Winxp media centre NTFS installed and I've used Casper [URL] to copy Windows 7 premium from another hard drive to the Winxp hard drive NTFS partition.Do I activate the Windows 7 on the Winxp hard drive ? Will it cause problems ? The hard drive Windows 7 is installed on is a used hard drive .I don't want to dual boot with 2 hard drives.I've also downloaded EasyBCD.
View 3 Replies
View Related
May 8, 2012
I want to make a recovery disc to reset my entire 4 partition dual boot hard drive back to its current state. the recovery would reset both xp and win 7 which i have dual booting. can i make one single image to do this without it screwing up my boot loaders etc? what should i use? 3rd party software?
View 9 Replies
View Related
May 28, 2012
now am using win7 hme basic, can u tel me vch software is helpful 2 chage 2d image to 3d image
View 2 Replies
View Related
Jun 23, 2011
I am attempting to create a backup image of my Windows 7 OS but when using the native Backup utility I only see a way to create an image with all of my files attached to the image when all I want is just a backup of just the barebones system. I lost my original Windows 7 Install disk so was hoping there was a way to get a copy of the OS since I just recently ordered an SSD. Basically I was hoping to move my OS install over to the SSD while keeping my files on my current HDD intact.
View 5 Replies
View Related
Jan 4, 2012
[code] Reboot and select proper boot device or insert boot media in selected boot devic &press any key
View 4 Replies
View Related
Mar 21, 2012
when I turn on my pc I get the follolwing error message "Reboot and select proper boot device or insert boot media in selected boot device and press a key".
View 1 Replies
View Related
Feb 3, 2011
I've been having alot of trouble with my brand new pc, having BSOD, caused by 2 drivers, tcpip.sys and e1x62x64.sys, i was on my way to fixing this, when i posted over on Sevenforums and got some help from the guys there, but i had another bluescreen, and my system did a CHKDSK on startup, this screwed EVERYTHING up.
View 1 Replies
View Related
May 14, 2012
I am very familiar with a PC - but I have to take an image of a OS X 10.4 Mac OS. Here is what I would like to do....
1. Back Up the MAC OS
2. Reinstall this in a virtual machine.
View 2 Replies
View Related
Jun 18, 2012
I have a SanDisk Extreme SSD, 120MB, as my drive "C" dedicated to the OS and programs. I tried to use [COLOR=blue !important][COLOR=blue !important]Acronis [COLOR=blue !important]True[/COLOR][/COLOR][/COLOR] Image to make an image backup to two different drives on my system. In both cases it failed and trashed the hard drives.
View 4 Replies
View Related
Oct 27, 2012
I have my windows 7 installed as fresh install and the computer works fast and as it was when i bought it . i am wondering about the way that i can make an ISO from my windows so that if there is any problem i can use it to restore my computer to this operating condition, is there any special programs or i can do it using Windows 7, I HAVE DELL data safe but i do not have much confidence on it.
View 9 Replies
View Related
Jul 5, 2010
How do I put an image on a folder?
View 3 Replies
View Related
Jul 23, 2010
after setting up brand new pc and instaling adobe acrobat 9 pro. my e boooks are not showing the cover images in my folder . they used to in fact the only way the covers show is when i click open in acrobat and a new page opens for me to select a file, then they show but the images dont stay . is there a check box for searches or displaying content i have forgotten . ps its good to be back
View 5 Replies
View Related
Jun 11, 2009
I'm having a few issues with images for Windows 7. I've been working with Vista images for the past few years without any problems but following the same procedure with Windows 7 doesn't seem to work for me.
To begin with I install the machine like normal, add in all of the software and then disable the Windows Media Player Network Sharing Service and sysprep the machine. After I boot using Win PE and capture an image once I try applying it the image fails, saying the the bootmgr is missing.
I can fix this by booting to a windows 7 dvd and run two repairs but would prefer if this didn't happen at all...
Is anyone else running into this issue?
View 2 Replies
View Related
