I've got Winxp media centre NTFS installed and I've used Casper [URL] to copy Windows 7 premium from another hard drive to the Winxp hard drive NTFS partition.Do I activate the Windows 7 on the Winxp hard drive ? Will it cause problems ? The hard drive Windows 7 is installed on is a used hard drive .I don't want to dual boot with 2 hard drives.I've also downloaded EasyBCD.
View 3 RepliesI have just replaced the hard drive on my laptop as the original was starting to fail. I created an image of the windows 7 pro 32bit original drive. I replaced the hard drive and installed a clean 64 bit version of windows. I have also installed a clean 32 bit version as a dual boot. I now want to use the original image of the 32 bit system and install this on the clean 32 bit installation.I have tried this using the image software I have (snapshot) but cannot get it to work.
View 2 Replies View RelatedI want to make a recovery disc to reset my entire 4 partition dual boot hard drive back to its current state. the recovery would reset both xp and win 7 which i have dual booting. can i make one single image to do this without it screwing up my boot loaders etc? what should i use? 3rd party software?
View 9 Replies View Relateddual booting windows 7 home premium x64 with linux fedora 14 on dual independantly dedicated drives. i am a college student with moderate computer (windows) knowledge but am doing software development and would like to play around with some linux for a class. i have no prior experience with linux and have minimal knowledge of operation. i am currently running windows 7 and would like to keep it as my primary os. i do not wish to share media files across drives or os's, windows does that just fine as is and i dont want to get into a third drive. my current drive is a 1tb wd black caviar hdd. it is also currently 2/3rds full and the desktop is about 6 months old so i would rather not partition the drive for a dual boot. i would think that there are some other advantages for the os's operating independantly off their own drives other than if one hdd dies i should still have the other with its os still ok. i have read some topics about RAID configs with dual boot setups with dual drives like this but am not very familiar with RAID. is there a RAID config that would be beneficial in this situation? i currently do not have a RAID card. my tower internals are not very accessible and i dont like the idea of disconnecting drives depending on which os i want to operate.
View 5 Replies View Relatedi have a new work laptop with xp sp3 on it. I want to install w7 64 bit as a dual boot, but only have 1 physical drive. i cannot remove my current installation as it is pre-build from work, but can partition the drive etc. However on trying to install w7 64 bit I get a message saying cannot install windows 7 on efi drive with mbr, not gpt. Can I do what I want without screwing up my xp installation?
View 5 Replies View RelatedI've got two nice little 1680 x 1050 20.1" Dell S-IPS monitors, which are de-facto 16:10 units, mounted on an Ergotron stand, with the intention of using one for television and the other for computing purp's.My Graphics card is a capable Palit HD4850 Sonic with dual DVI outputs. It's also got an S-Video output which isn't in use.What I would like to do is run WMC maximised on one monitor, with TV there as and when I wish to view anything, and naturally I wish to use this screen maximised (the only issue in WMC is that there is a limitation of either choosing 4:3 or 16:9 ratio output, and not 16:10).However when I connect both monitors vai DVI output Windows7 locks my cursor in the maximised TV screen and I then cannot control the primary PC monitor whatsoever - which is somewhat of a complete farce, and is an extremely dissappointing result!Accordingly I have to drag the WMC display to get the 16:9 output to 'almost' fill the 16:10 monitor, and then face the annoyance of the cursor drifting to that screen from my PC monitor from time to time (I can happily live with a band to allow for the 16:9 ~ 16:10 hardware differential... but not this ridiculous loss of cursor control!)Question is this... why does my cursor focus get restricted to one screen if the Windows Media Centre is maximised? The whole point of having dual-monitors is being able to use both of them at once of course.I've tried with the ATi driver alone, and with the Catalyst suite loaded, with no differences to the issue.My monitors also have an S-Video input, but I've not got an S-Video cable to hand right now - however... if I were to use S-Video for one monitor would I avoid the 'locked in cursor' problem?
View 9 Replies View RelatedI installed Windows 7 on a partitioned harddrive with vista on the other half. After the installation i have my boot menu with:Windows 7, Windows Vista, Windows vista still works but when i try and load windows 7 i get a boot error message
View 9 Replies View RelatedI have dual boot with Xp and windows 7.when i log into my Xp all the restore points being deleted from windows 7.when i check the disk management information in 7 it shows windows 7 create a logical drive with my Xp primary drive.even i am hide the drive from both windows means Xp drive from windows 7 and vice verse.So i like to unmount or remove the drive partition of windows 7 from Xp and Xp primary from windows 7.So that they dont affect each others system files with being deleted the partitions.
View 1 Replies View RelatedI installed opensuse 12.1 on dual boot along with my other windows 7 installation. Installation of opensuse is successful and i can use it. But when I tried to use windows 7 on grub, it says bootmgr is missing. I've already encountered this problem a long time ago so i tried to use bootrec /fixmbr, bootrec /rebuildbcd and bootrec /fixboot in the recovery console in the windows 7 DVD. Rebuildbcd and fixboot did not work and it said something like it cannot find my windows installation. I also tried bootrec /scanos, it returned a windows installation on D:\Windows but my windows is in drive C. I think this has something to do with me messing up the active partition in disk management a month ago but i already fixed it by setting the active partition to the system reserved partition. Only fixmbr is successful, but now i can't boot on any OS because it says: Missing operating system.I also tried bcdboot C:\Windows but it failed with a message that goes like: Failure when attempting to copy boot information..
View 2 Replies View RelatedI can't get Win 7 to boot after setting up dual boot (Ubuntu 10.10) on my GF's laptop. I'll describe the problem and everything that has been tried so far. REALLY hoping somebody has an idea, I'm getting desperate.I installed Ubuntu last night via the Live CD. Used the Live version to install alongside Windows and partition the drive, install Grub, etc. At reboot, after POST it would just go to a black screen with a flashing cursor. I could only run off the live CD. A forum member determined the Grub was trying to load from the wrong partition. We changed that and voila! Grub now loads properly. I can boot into Ubunto via Grub with zero problems. HOWEVER: when I try to boot into Win 7 from Grub, it just locks at the same flashing cursor of death screen. The 7 partition is till intact, I can see and access all the files on the 7 partition from within Ubuntu, however 7 will not boot. I have tried downloading and burning the Win 7 repair disk and doing all of the following,Running the automatic Start Up Repair - several times. All it does is remove Grub, but booting still goes to the flashing cursor and I have to reinstall Grub again to be able to do anything after POST.I have used the command prompt to run "bootsect /nt60 SYS /mbr". Has the same effect as above.I have used all the bootsec.exe /fixmbr, /fixboot, and /rebuildBCD commands. Again, all have the same effect and I have to reinstall Grub to get anywhere.I don't have an installation disk to try and just do a repair install because Asus apparently doesn't feel that I would need one of these. All I have is the recovery disks from the Asus AIRecovery application that want to just re-format the entire drive and start over. This isn't an option. It's my GF's laptop (mine gave up the ghost last week) and we both have WAY too much highly important data on here. Not to mention she would castrate me . Now from all my research the only other thing I've come across that sounds possible is that the boot flag needs to be set to a different partition. Somebody had a somewhat similar problem and it turned out the way Dell set up the system the boot flag had to be moved to a recovery partition and it worked fine. I'm wondering if Asus has something similar going on, but I can't figure out how to move the boot flag. I'm going on 12 straight hours of working on this now
View 9 Replies View RelatedHow to Change the OS Name in Windows Boot Manager ?
View 0 Replies View RelatedI had a system with programs I have installed and the setup and imaged it with acronis or for any matter, it could have been a perfect clone drive copy because the program isnt the issue. My i5 - 2500k achi windows 7 was imaged to a new hard drive and attempted to run on a AMD Phenom 4x 9500.Now before you go telling me about the three hard drive modes, Raid , IDE and ACHI. I've edited the registry and have tested all three modes to correspond with the motherboard bios setting of the drive. I assume its IDE or ACHI, which I've tried loading windows on the orginal machine, editing the registry settings, then trying it again on another machine.Where I am at now is it goes to classpnp.sys when im watching safe mode and stalls there. Im noticing before it was stalling at disk.sys but i think i fixed that via the registry settings for the hard drive mode.Tried to make a generalized image by using sysprep got the error fatal error because i guess its used more than three times, dont understand what disarm command they are talking about for workaround since the xml file doesnt exist.
I have tried ACRONIS 2011 Image with Universal Settings mode (that is supposed to remove hard ware specific settings)I have also tried using the windows disc, going into launchup repair, repair startup.I also went recovery console, then tried renaming classpnp.sys to classpnp.old.I tried several options using the Ultimate Boot disk but its not the boot up mbr as it boots up , its the loading of one of the system files/drivers that make it fail.The reason why im trying to just clone one hard drive and put it on another system is because, everything is installed, the programs, etc. Its saving me god bloody 2 days with setting up the programs, although Im getting close to over a day trying to figure out whats the big dela with getting this to work on another computer.additional information : I do not need any user specific preferences, documents, files or settings, everything can go, i just want this installation with about 25 gig of programs, to load and work.If you know of a program thats fairly easy to use considering im already one day into doing this, then let me know and tell me what im looking to do and some instructions are great.Either way, im waiting for an answer, will be here next 3 hours.im on skype as well, this user name is spelt backwards for security reasons.
I have installed a year before UBUNTU on my pc with dual boot (i.e. use either window 7 or ubuntu).the NTFS partition that contains the UBUNTU was corrupted and i wanted to take the dual boot from my PC. I used the instructions from the web site: http://www.makeuseof.com/tag/how-to-...t-environment/but the disk management tool would not let me delete the NTFS partition.Could any one help me delete the NTFS partition and use just windows 7 as the only boot. step by step help would be great.
View 8 Replies View RelatedI got windows 7 running fine for a while now and ever since my XP did not boot anymore.I was not worried to much about it since i did not need it at the time.But now i really REALY need it,See i got all my Cubase projects in there and my cubase plug-ins al setup in XP and i need to get to the projects?At first it did not do anything and using easyBCD did not help either.I cpoied ntldr and detect to the root of C: wich contains my XP and now it shows the bootscreen but hangs on a black screen.The thing is right before the bootscreen shows i see the text" invalid boot.ini" flashing by very quick.I am able to enter that winXP install in safe mode and i tried safe/vga mode as well wich works but thats all.
View 9 Replies View RelatedI have a laptop I bought a year ago on which a created a dual boot Win 7 (32bit)/Win XP SP3 install, each on a separate partition. It was my first Win 7/XP dual boot install, and my first personal system that I allowed to have a Win 7 install on it at all, so although I have plenty of experience working on pretty much every previous version of Windows, I have very little experience with Win 7 and dual boot configs.
Today about 2 hours ago my audio spontaneously stopped worked for no good reason, so after shutting down each program to see if that cured it (which it didn't), I restarted the system. Out of the blue, for the first time I've ever experienced it, I received the msg "MBR Error 1" - Press any key to boot from floppy. I don't have a floppy of course on my laptop, and if I press any key I simply get the same msg. I turned the system off for a few minutes to make sure it was a good cold boot, but every time I still get the same msg. I tried switching the BIOS setting from IDE to AHCI (IDE is required for XP to boot, AHCI required for Win 7), but I still get the same error msg before I'm even prompted with the OS boot selection, so it made no difference of course.
I looked up this issue and found various suggestions, but none of the ones I found took into consideration a dual boot config., they were all Win 7 specific solutions. I don't what to try and repair the MBR only to have it screw up my dual boot config and be unable to access XP, which is what I use almost exclusively, nor do i want to lose access to Win 7 if at all possible.
I had a backup HD of my complete system that I saved several months ago when I upgraded my HD, and I periodically refresh the most important files on it, so I'm currently running on the laptop in question using my old HD, and it's working just fine. Worst case I can just clone my old HD to my newer HD that's screwed up, but I'll still lose a lot of changes I've made to the OS since I upgraded the HD and have to reinstall and config a number of programs, so that's my last option. I'll also have to back up about 200GB of data from the newer HD which is much larger than my old HD, and then restore it back after the clone, something that will take a lot of time and unncessary effort if I can just fix the MBR.
I had Win XP on 1 HDD & installed Win 7 on a different HDD. I think I accidentally did a dual boot install because Win 7 won't boot without the the XP disk connected to the motherboard.
That was fine until my XP drive died yesterday. Now Win 7 won't boot. The first time I tried to repair, Win 7 was not even seen. so I booted into diskpart and made the partition active. Now it could be seen as an OS.
Then I did a startup repair. It did whatever it does & when it was finished I restarted the pc but it didn't boot I went back to diskpart and confirmed the partition was active. I went back startup repair and tried again.
This time it said it could not detect a problem, but it still will not boot. What else can I do? My pc is homebuilt. Right now I have the 1 sata drive, 2.53 ghz cpu, 4gb ram, onboard video & sound
I had a hard disc crash, installed a new disk, upgraded to Windows 7 and now my dual monitors display the same image where before the crash they did not.
View 2 Replies View Related[code] Reboot and select proper boot device or insert boot media in selected boot devic &press any key
View 4 Replies View RelatedSSD boot drive failed after just 5 weeks. It takes me an entire weekend(at least) to reinstall and reset everything. Not to mention lost saved passwords and some other important data that I did not get backed up which leads me to my question. Can I use my Last Windows Image backup to install on the new boot drive and if so how?
View 2 Replies View RelatedI have an HP Pavilion laptop and used recovery manager to do an image factory restore. Upon reboot it brings up the following message:
Please wait:
updrvltr:unknown
x:windowssystem32
It wants me to enter something at the command prompt. What I need to do?
As currently configured, XP is on drive C:, Win 7 was added to drive E:, and the system is currently run as a dual boot. Attempting to boot without the XP drive present will yield a "NTLDR is missing" error very early in the boot process.
I have already tried the following:
(1) I moved the hidden Windows Boot Manager files (bootmgr as well as the associated Boot folder) from the XP drive root to the Win 7 drive root.
(2) After physically removing the XP drive, I rebooted to the Win 7 installation DVD, and used the "Repair Your Computer" option to pull up the "Recovery Tools". Then, using the command prompt utility, ...
(3) I attempted to write a new boot sector to the Windows 7 disk using the command: Bootrec /fixboot, - that yields an error though. The Bootrec /fixmbr claimed success, but ultimately did not make Win 7 drive bootable.
I had to reconnect drive C: just to boot into Win 7 again to write this. I do have files backed up, but to format and reinstall files would take many hours beyond just the time to transfer 400 GB of data, since I have dozens of purchased applications that need to be freshly reinstalled and validated as well. Basically I want my E: drive now to be my boot drive while the C: drive is reformatted and used for general storage.
Any idea how to make my Win 7 drive bootable? Do I need a partition program that is more adept at creating a viable boot sector, or is that even the problem?
I have a problem laptop that has a oem windows 7 home premium on it. I want to wipe everything so that only windows 7 is left and start from scratch as the issues I am having cant possibly be hardware based (I hope!!) The issues are varied. Can I write a boot cd from my current setup. Have googled it but see alot of topics that dont exactly match my situation. My ssd has partitions for system and hp recovery. Would it be simpler to restore somehow using that. Ideally I would like to create a windows 7 disk from my Oem erase everything and boot from cd.I know there will be a thread somewhere that fits this but I cant tell the ******** from the right way to go.
View 3 Replies View RelatedAfter restoring my pc from a system image, when windows resarts, it won't boot, & I'm taken to the "startup repair" option screen. After Startup Repair is performed I get the message "Startup Repair Cannot Repair This Computer Automatically" with the following problem details:
Problem Event Name: StartupRepairOffline
Problem Signature 01: 6.1.7600.16385
Problem Signature 02: 6.1.7600.16385
Problem Signature 03: unknown
Problem Signature 04: 52
Problem Signature 05: AutoFailover
Problem Signature 06: 1
Problem Signature 07: BadPatch
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
It says that the root cause found is "A patch is preventing the system from starting" Error code = 0x490.
I created a system image on an AHCI system, then I replaced the hard drives & re-imaged the system. Now Windows won't boot in AHCI mode, it has to be it IDE mode. Why is it not booting in AHCI mode?
View 5 Replies View RelatedI installed Windows 7 32bt profesional on the D: partition on an XP machine (C. Dual boot worked fine, but since I had to reinstall XP I have lost the option to change partitions at boot.I want XP to be the default but with Win 7 to an option at boot.My boot.ini is currently:[CODE]
View 4 Replies View RelatedI wanted to dual boot Mac OS with my Windows 7 but everything I do it comes wrong, simply doesn't work. I tried dual boot with iatkos v1.0i, iatkos s3, iatkos v7 but still nothing.
View 3 Replies View Relatedi have a hard disk 500gb and i made three partitions.the 1st partition i installed windows 7 first.what i did today?i wanted to install windows xp to the 2nd partition.i installed and now that is the biggest problem.i cant in to windows 7 anymore.when i turn on my pc it has only windows xp.it hasnt dual boot to choose what operation system i want to in.so what to do?i want windows 7 and xp with dual boot to choose
View 9 Replies View RelatedI tried to make a dual boot with windows 7 and windows 8, but when I made a partition, the hard disk drive (C changed to dynamic.Can I still upgrade to windows 8?how can I convert it back to basic disk?I have windows 7.
View 2 Replies View RelatedVideo tutorial on how To Dual Boot Windows 7 ?
View 0 Replies View RelatedI had Windows 7 installed on my PC. Today I installed Windows XP in another partition. But now when I restart my PC I don't get a DUAL BOOT mode screen. It automatically logs in XP. How do I log in WINDOWS 7 now?
View 8 Replies View RelatedA friend of mine made a dual boot system on my laptop. The problem is it loads windows 7 without going to the boot manager screen to allow me to choose which one i want. My laptop came with xp and it shows that the hard drive has been split. And it also doesn't have the recovery in the laptop.
View 1 Replies View Related