I keep getting BSOD! I put my computer together yesterday, within the first 7 hours i got a BSOD, i was like okay. updated my drivers, double checked everything. I'm still getting BSOD! It really starting to worry me! I've attached my mini dump, if that's needed.
View 14 Replies
I'm getting the BSOD and the system will not boot.
AMD Athlon 64x2 6000+
3072 MB Ram
500 GB HD
Nvidia Geforce 6150 SE
I recieved my computer from a family member about 6 months, when he gave it me he told me it had a problem of BSOD, my knowledge of computers is limited and having read forums i have tried to update all my drivers, i have also unplugged different equiptment attached to the pc but still i get the BSOD after the system is idle and has been brought back to life, this happens anywhere between 1-15 mins of it being brought back to life[CODE]
View 9 Replies View RelatedOkay so I've just built my first rig from scratch yay!!. But it keeps crashing at random times even when I'm not using it. I'll get a blue screen that either says pfn_list_corruption ir memory corruption. I've tried looking up these issues online and to know surprise I havn't found a thread where the main culprit of this problem has been found.
I do know that it is a memory related issue lol or it could be a bad driver. Which I don't think it's a bad driver because I've just reinstalled windows 7 and the only driver I have downloaded were the windows updates and for my graphics card. So now I'm trying to learn how to use windows debugger to narrow down the source of the problem.
Just to be clear, these crashes do not provide a BSOD and therefore no error code for me to research and correct on my own. In the last two days, this has happened 4-5 times, and most often while watching streaming video online (but not always). Without warning, everything will lock up (sometimes this is accompanied by a terrible sound emitted from the speakers - presumably looping audio from the video i was watching). The computer then reboots itself without my involvement. Before anyone asks, my drivers are UP TO DATE, and my BIOS is up to date as well. So far, I have asked around and most people point to my graphics card overheating, or a very dirty (dusty) pc as a likely cause. Firstly, my computer is generally kept very clean, and I am monitoring my GPU temps and they are usually WELL within normal ranges (frankly it runs very cool). I have called EVGA for support, and they told me they had not heard of this problem before. They had me run a bunch of gpu stress tests, all of which provided no clue (they were clean) as to what could be wrong. Someone else told me to make sure my RAM was properly seated. I did check that and I can't see any seating issues.
OS. Windows 7 HP 64Bit
CPU. Core i5 750 2.66
Motherboard. Gigabyte GA-H57M-USB3
Memory. Mushkin Enhanced Blackline Frostbyte 6GB 3X2GB PC3-12800 DDR
Graphics Card. NVIDIA GeForce GTX 460
Monitor. Displays Acer LCD 24" 2MS H243H BMID
PSU. Corsair TX750W 750W ATX 12V 60A 24PIN ATX Power Supply
Case. Antec Three Hundred Gaming Case ATX 3/0/(6) 2xUSB Audio
Cooling. Arctic Cooling Freezer 7 Pro REV.2 CPU Heatsink Cooler LGA13
Hard Drive. Western Digital Caviar Green (WD10EARS) 1000GB (1TB) SATA 3 Gb/s 64MB (OEM)
my config:
Processor: AMD Phenom II x4 945 AM3
Motherboard: Gigabyte GA-790FXTA-UD5 AM3, BIOS F2
RAM: DDR3 Mushkin 996776 4x4 GB (16GB)
graphics: Gigabyte Radeon HD 7950 GV-R795WF3-3GD
[code]....
SSD, Radeon HD 7950 and Mushkin ddr3 are the newest parts. But I'm experiencing random BSODs (ntoskrnl.exe). There were also BSODs related to dwm.exe, but they disapeared when I installed Catalyst 12.8. Sometimes there are hardlocks without BSODs - ctrs+alt+del doesn't work here so I have to do a hard reset.First I thought it might be related to Radeon 7950 and compatibility problems - F2 (2009) is the latest BIOS for my motherboard (there is also F3J but still beta). Now it seems to be ok after I installed Catalyst 12.8.Then I thought that the SSD connected to Marvell controller is the problem. Well, there is a problem cause BIOS sometimes cannot see this SSD. Now Im thinking of buying a newest motherboard... unfortunately. I updated Marvell Controller drivers, still the same.Next thing - I ran memtest86+ ver. 4.20 to check memory. Pass 0 (Modulo 20, Random pattern) - there's only one error:
Test 8, Pass 0, Failing address 00080073468 - 2048.4mb
Good: e17e40c8
Bad: e17e00c8
Err-Bits: 00004000
Count 1
Next pass - no error. I let Memtest complete 6 passes. I got only this one error.BIOS settings:
tCL: 9
tRCD: 9
tRP: 9
tRAS: 24
Ram voltage - 1.635v set memory voltage to 1.650V. First MemTest pass - no errors. Second pass also completed. I think that all four sticks are ok. I can't say it's overheating. I'd say the memory is getting warm (even not so warm), but not hot. Third MemTest pass also was completed. No lock ups. Probably too low voltage could generate errors.Today I got another BSOD:
2012-08-28 19:38:20 SYSTEM_SERVICE_EXCEPTION 0x0000003b 00000000`c0000005 fffff880`0404a609 fffff880`0b98e9b0 00000000`00000000 tdx.sys tdx.sys+3609 x64 ntoskrnl.exe+7f1c0 C:WindowsMinidump�82812-36504-01.dmp 4 15 7601 276 112
I was creating a system image with Windows built-in utility. It had been running for at least six hours and I think it may have been either finished or very close when my computer shut down due to a BSOD.
Is there any way to find out whether or not the image was finished and created successfully, or if not, is there a way to continue and finish writing the last little bit to salvage the image and have one that would work if I needed it to restore my computer?
The image was writing to an external HDD, and I think it had to erase/write over the previous image due to space considerations.
it's overclocked, both CPU and GPU and i've done a lot of adjusting over the years
it was doing so many BSOD when i was tweaking the overclock, but i left it alone when i left the home i was at, at the time (i have had it so it was much stable and was rarely BSOD'ing) and i moved to somewhere else for a while, but anyways
now i'm back and taking my computer to my actual home, so now i want to get this under control
Windows 7 - BSOD 7e while system restartWindows 7 Home Premium, 64bit (installed by recover CD ).
System is just new installed.
Antivirus is Norton
my system specs: CPU:I7-3610QM 2.3GHz
DDR3 8G
HDD 1T
Display :intel + NVIDIA GeForce GT 630M optimus technologyChief river platform
I've been trying to troubleshoot my BSOD issues the last 2 months but I'm not sure what to do from here. During restart my computer will BSOD; sometimes restart 5~6 times will BSOD, sometimes 2000~3000 times not happen, always seemingly random but once happen ,next time will continuous BSOD. A few things I've already done:
Updated BIOS.
Scan virus (no virus)
It is windows 7 and runs very very smooth (since it's a gaming computer). Today i decided to watch Naruto shippuden so i searched it on google went to the link, found the video and clicked play. 5 seconds after i hit Play my computer shut off. The system automatically restarts and i Select run windows normally again it restarts and gives BSOD. I can run windows in Safe mode, and safe mode with networking. When it restarts i hit run windows normally, it runs everything is fine. The boom BSOD.
View 9 Replies View Relatedi just save my project and then after a few minutes i got BSOD i read "ntfs.sys" then i restart my computer and then my system won't boot, displaying in monitor is no cable connceted, but when i check it's ok.
View 9 Replies View RelatedSo I finally get everything installed and running. I updated my gfx drivers to the latest at the time(a couple weeks ago) and things worked.
The computer had been shut off for probably a week maybe longer. Turn the computer on, right after I login, bam, BSOD. system_service_exception.
So I do some searching on another computer. Most of the things come up talking about gfx drivers being the problem, but nothing definite.
I rolled back the drivers. Things work fine. ATI released a new driver catalyst 9.11. I install that, everything is fine. computer was shut down and restarted and still worked fine.
I fire up the computer tonight, bam, BSOD. Same message as before. So I rolled back the gfx driver and now it's working normal again.
Does it make sense for the computer to be working fine with the newer drivers, be shut down for a while, and then not work? Cause that doesn't make sense to me.
There's also not much information out there regarding this system_service_exception BSOD that comes up. It would be nice to have some better concrete info on it.
current setup:
gigabyte ga-ma790gpt-ud3h
amd x4 955
g.skill 4gb ddr3
WD caviar black 750 gb
Windows 7 64 bit home premium
I got the smart hdd virus last night, I tried to install malwarebytes but it was blocked by the virus, so I did a system restore from safe mode to 5 days ago. When the restore finished, it booted and said that the restore had not fully worked, but it appeared to have had, with all my files visible again, same with my programs. I then installed malwarebytes and restarted. In the middle of booting windows, it bsod'ed, I did not catch the error message. It does this when I try to boot every time. When it goes into system repair, this message:Windows failed to start. A recent hardware or software change may have caused the problem. To fix this:
1. Insert your windows installation disc and restart the computer.
2. Choose your language settings, then click next.
3. Click repair your computer.
If you do not have this disc, please contact your system admin or manufacturer for assistance.Status: 0xc000000e Info: The boot selection failed because a required device is inaccessable.I do not have a Win 7 home premium disc, only a win7 pro disc. I am able to make a clean install if required with the pro disc.Will this work with the windows 7 professional disc?
Did a new install....updated win 7, updated and a clean install of GPU drivers, updated all other drivers.Only software loaded as yet is MSoffice 2010....updated and Norton. No overclocking as yet and the system randomly either freezes or I get a BSOD.
View 14 Replies View RelatedI have already read through the small dumps with BlueScreenView and fixed any driver issues I found. I also ran Windows 7 Verifier to stress test drivers and uninstalled anything I found to be an issue. I recently ran into an issue with my system receiving the Stop: C000021a Fatal System Error BSOD. It only occurs at nighttime after I am done gaming. From the system logs it seems to crash right after I get off the system (like within 15 minutes). I do have a screen timeout setting of 15 minutes. However, I play the same games throughout the day on and off with my screen timing out and it doesn't BSOD then. ONLY at nighttime. I can't think of anything else I am doing that is different. Below is a list of changes I recall since the issue started up.
View 8 Replies View RelatedMy computer has started getting BSODs since a few weeks ago and like running Memtest, an extended version of Windows Diagnostic scan (both of which came up with no error results), and updated my drivers but to no avail.
Attached is a rar file containing files from SF diagnostic tool, screenshots of the cpuz tabs and an html report from Rammon. Seven Forums.rar
Since building a new computer a few months back, I have been having issues with BSOD's while playing certain games like Battlefield 3 or Wow. But Skyrim and others are fine. I've tried many different drivers for ati and I'm currently using 11.12, but crashes still happen. I don't believe its a overheating problem as the temps are all low. WhoCrashed suggests a driver issue and has singled out ati as the possible issue a few times.
GA-990XA-UD3
AX6950 1bg
AMD Phenom II x 4 965
G.Skil 6b (3x2bg) RAM
Do these crash dumps show any type of noticeable pattern for the crashes?
I recently reinstalled Windows 7 Home Premium 32 bit on my HP Pavilion dv6233se notebook pc as a response to frequent system crashing and being unable to restart. I've updated all the drivers as far as I can determine, but I still get occasional BSOD. The blue screen is too blurry for me to read so I have no information to go on as far as codes or causes.
The most recent BSOD occurred while running IOLO System Mechanics, when I started the defrag tool, but I have since run the tool without incident.
[code]...
I've been getting random BSODs over the past several months. The latest is the one listed in the thread title, but I've also had the following:
- Kernel_Data_Inpage_Error, 0x0000007A
- Page_Fault_In_Nonpaged_Area, 0x00000050
- A process or thread crucial to system operation has unexpectedly exited, 0x000000F4
Whenever I get one of these, it also gives the additional error "Physical memory dump Failed with status 0xC0000010"I've seen about a dozen BSODs in the past 12 months with these four errors, and I think all of them have been while I had left the computer idle for various amounts of time (never more than a few hours).I built this computer from the ground up with all new components a year ago and have been running Win 7 Ultimate x64, no re-installs.
my computer has been experiencing frequent bsod events mostly during gaming but often while streaming video as well. I recently installed several new components in my pc including a new mobo, ram, and an hdd. The system's memory was tested, the bios have been updated, and the display drivers have been wiped and updated.Nevertheless, I've received the following error messages:[CODE]
View 6 Replies View RelatedEarlier this morning I restarted my laptop to the desktop and left it running. After coming back to my room a couple hours later, I noticed that there was a System Repair window on the screen. And whenever you see this there is always a state of being very concerned.I restarted my laptop only to be directed to the BSOD. I restarted the laptop, only to be presented with the same screen. I immediately took a picture with my cell phone to make sure I could read anything that could give me a clue as to what the error could be. Below are the error codes:
***STOP: 0x000000F4 (0x0000000000000003, 0xFFFFFA800CBABB30, 0xFFFFFA800CBABE10, 0xFFFFF80003B8B510)
I started up the laptop and was prompted with options to either start Windows as it usually would or to try and go through the system repair. I tried system repair again. I was brought to a screen to try and do a system restore to an earlier point. The closest restore point was earlier today and that was due to some critical updates that windows had automatically had downloaded and installed. So, I tried hitting that restore point only to be shown a window that stated that system restore was unsuccessful with the restore. I tried again with a restore point from a week ago and was again shown the same unsuccessful window.
The next thing I did was scour the internet for recent BSOD listings. Everything told me to get into Safe Mode by hitting the F8 button after restarting the computer. The first time I tried it, I hit Safe Mode (without networking or command prompt). I saw the screen fill up with file listings as it usually does, again to be prompted with the BSOD. The next time I tried hitting F8 I was only shown two options: Start Windows normally or the system restore option. I tried again searching the internet on my phone to try and first power down the laptop, take out the battery and hold down the power button for 30 seconds, which I first did. Then I went into the command prompt located in the system restore window. I performed chkdsk /r on the C: drive by typing:C:, then enter and chkdsk /r I was then prompted with something about having to dismount the C; drive in order to check the drive, and pushed Yes for that. After that was completed I was successfully able to find all the boot options in the F8 menu when you restart the computer. This was an arduous journey to get this far. Took quite awhile and there were many unsuccessful other attempts before trying this route.So, I tried the Safe Mode with Networking and booted successfully into Safe Mode. I tried running Norton which stated that I couldn't perform that action. So I tried restarting, FINALLY to boot into Windows. I am currently performing a full system scan with Norton 360 and will post my findings. I am also posting the minidump files that were asked for, in order to post in this forum below.
System Specs: Lenovo Y560
Intel Core i7CPU
1.73 GHz
64 bit Operating System
8.00 GB RAM
[code]....
I'm using a 2007 Toshiba Tecra M5 Laptop. I've run the SF Diag Tool, so here are the details.My laptop has thus far crashed 5 times today in a time span of 3 hours, what can I do to make this stop? Any ideas why this happens?
View 9 Replies View RelatedI have a Lenovo B560 with Windows 7 x64. Sequence of events: Played music from a WD external HD with WMP. Music stopped playing and a terrible constant sound is coming out of the speakers (which began a year ago and happens sporadically), no other programs running besides WMP.2. BSOD appeared while the noise kept going, so I held down the power button to turn off the laptop before reading the error message.
View 9 Replies View RelatedI had a BSOD two days ago coming out of standby and ever since the system locks up after reaching the desktop whilst trying to log in. Logging into safe mode works perfectly fine and also logging into the Ubuntu partion has no problems. I have run malware bytes and hard disk diagnostics and found no problems.
View 1 Replies View RelatedMy computer has been crashing alot lately. I get BSOD within a few minutes of using my computer. Earlier than this I had issues with my internet connection, even when using an ethernet cable. My network adapter would get a Code(10) saying it couldnt start, so I tried downloading a newer driver. I tried several times to update it but I was told it was up to date. Then I uninstalled it, also tried changing the settings so windows wouldnt automatically install, but I still have trouble. A lot of the BSOD occur if I am trying to use the internet. I tried updating my display driver as well, but the NVIDIA installer keeps saying the install failed. I tried downloading the newest BIOS from the manufacturers site, but I got BSOD special_pool_detected_memory_corruption.
What is also strange is that only a few days ago I moved my computer to my bfs place, and prior to the move I've only encountered windows freezing once in a while. Then after maybe two or three days of use, we started getting crashing. So we tried moving my files and doing a clean recovery in a desperate attempt to make it all go away. Then I tried looking on the internet for people with similar problems, but it all just seems so specific. I also turned on Driver Verifier as it should apparently give more useful dumps or something. I have changed nothing on my computer, other than doing a recovery a few months ago and now hooking my computer up to his monitor, mouse and keyboard. And I think the computer is outside warranty too.
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1030
[code]....
While playing games like cod 4, Battlefield BC2, and some other games, all online the computer freezes and the only way to make it move again is to reset. I think it maybe related because all the problems happen while I'm connected to the internet. Lately it has crashed and it appears BSOD message. This is what it says:
Error name: "SYSTEM_SERVICE_EXCEPTION"
Technical Information:
"Stop 0x0000003b(0x000000000c0000096, 0xfffff880094f98f1, 0xfffff8800b411cc0, 0x0000000000000000)
kernel.amd64 - Adress fffff880094f98f1 base at fffff88009478000, Datestamp 4581d357"
I think it maybe related because this only happens when I do something on the internet. Watching a video or uploading something, or playing online games. Plus sometimes it freezes and not even the reset button works. I have to turn it completely off and in 5 seconds turns back again on its own. I don't understand much of it, but i went to event viewer and not all the errors are totally alike, so i don't know if that means the cause is different. I have lots of critical errors and all from the source: kernel power; and event: id 41. I have other errors with name "KMODE_EXCEPTION_NOT_HANDELED" and other with no name.
CPU: i7 2600k 3.5ghz
MOBO: Gigabyte g1.Sniper 2
RAM: Corsair CL8 vengence 8gb (4x2)
SSD: Corsair Force 3 60gb (Windows 7 pro 64 bit installed here)
VGA: Sapphire 2gb 6950 x 2 (in crossfire)
HDD: Western Digital 2TB SATA 3 black
PSU: Corsair HX-1050W
Hi!
I have been having some troubles with this computer since day of purchase. The first BSOD I had was posted and resolved here: BSOD during battlefield 3. Previously, my computer would BSOD during game activity, such as battlefield 3. Elmer identified the probable cause being Avira, and sure enough when I attempted to delete it the computer BSOD; I managed to delete it in safemode and have had no BSOD's during game sessions ever since. However, lately I have encountered random BSOD's during Windows update and System start up (Just before the windows logo screen) of the same error code; I have posted the DMP file and CPUz screenshots. I think it is also worth mentioning that in games I have noticed stuttering no matter what graphical settings I set it to.I am having difficulty tracking down the Hardware responsible for this BSOD; I have run memtest overnight and it passed without fault. Could the 60gb Force 3 SSD be responsible? Or the RAM?
i have been having this issue since Vista. I will randomly get the BSOD 0x3B. I notice it happens a lot when i play call of duty 4 and the new call of duty modern warfare 2. I immediately thought it was my ram. I took out all of the sticks and ran the vista memory test (i know, probably not the best choice) on each individual stick and then all of them together. No issues found.
After testing the ram i thought it may be my GPU because of the fact that it happens a lot in call of duty. I figured maybe the way the game renders on the GPU, its probably using a bad portion of the GPU RAM. I planned on upgrading in the future so i went ahead and ordered a Radeon 5870. it will be here friday. Hopefully that will fix the issue.
Here are my current system specs. Maybe you will find something wrong with it. I have updated the BIOS, Video Drivers and motherboard drivers.
Intel e8400 @ 3.6ghz. Cooled with a Cooler Master V8. Max temps after playing for awhile about 43C.
I have a gateway nv53 Windows 7 X 64 I reinstalled system 2 times with the purchased media. and still getting BSOD it doesnt stay up long enough to read it. Both times I removed norton and best buy app the first time i installed Microsoft security essentials the second time i installed Avira
View 2 Replies View RelatedI have been dealing with a problem now since January and I wonder if someboddy is recognizing this. My system gets a bsod when I install the graphic driver. It doesnt happen directly but after a while when im on the internet or when I'm trying to run FM 2012 or other games. Then when i reboot I get bsod before windows startup. When the driver isn't installed the computer is running without problem but im not able to play a game or connect the computer to TV and stuff like that.When I reboot again and put the computer in Safe mode I uninstall the driver in device manager and reboot again and the computer is able to start normally.The files that cause the bsod is:
atikmpag.sys <------ almost every time this one
dxgkrnl.sys
ntoskrnl.exe
*I looked around on the internet for soloutions, there're many and I have tried almost all. I've tried to remove everything with driver sweeper to install the latest update to my ATI Radeon HD 4870 x2. Even tried to install old updates.
*I have tried to install various OS. Vista x32, x64. Windows 7 x32, x64 and even XP. The problem remains. Now when I know that it doesn't matter I have Windows 7 x64 Ultimate.
*I have opened up my computer and removed all the dust from the motherboard, Graphic card and CPU. The temp is OK!
*I removed one RAM memory and it didn't work.
*I've never overclocked anything.
*I've done some system test over night and it didn't find any errors.
*I've upgraded drivers on the bios and everything else on the motherboard and CPU.
System
OS
Windows 7 Ultimate SP 1
CPU
Intel(R) core(TM)2 QUAD CPU Q9650 @ 3.00GHz
Motherboard
MSI MS-7519 Mainboard
Memory
4096 (2x2048) MB 800 MHz (Corsair)
Graphics Card(s)
ATI Radeon HD 4870 X2
I read the instructions and will attach my dump files and report as a zip file. I build my system myself, but the last few weeks I keep getting BSOD.
AMD quad core
Asus motherboard
8 gb Geil memory
Asus GPU
The dump file shows ntoskrnl is the driver causing the BSOD. Another dump file says ElRawDSK causes BSOD. Both offcourse are drivers.
