Need A Logging Program / Monitor Won't Turn Off
Nov 7, 2011
I assume something is polling the web or keeping my monitors alive but I can't figure it out.nothing has changed in my setup other than a possible windows update but in the last few weeks my screensaver stays on 24/7.I played with it today and got it to shut off but i set the screen off time at 2 minutes, just 1 minute after the screen saver.I am using ultramon on a dual monitor setup. and for a screensaver I am using gPhotoShow. (allows separate/distinct slideshows for each monitor) as I have been for several years.my assumption is something is now polling the net or doing some activity that is preventing the monitor from sleeping. So I'm wondering if there is a logging program that I can use to track this down. i did hijack this but that isn't helping (as far as I can tell)
View 2 Replies
ADVERTISEMENT
Feb 4, 2012
I have a HP Pavillion DV6 laptop. Whenever I turn my laptop on and log on, a few minutes after logging on it freezes. Cant access anything, have to restart it. When turning on I gave it a scan by pressing escape and on the HP checks, the hard disk check it failed. Tried going into command prompt and doing chkdsk /f but get what's shown below.Checking file system on C:The type of file system is NTFS..One of your disks needs to be checked for consistency. You may cancel the disk check, but it is trongly recommended that you continue.Windows will now check disk.Cannot open volume for direct access. Autochk cannot run due to an error caused by a recently installed software package.Use system restore feature from the control panel to restore the system to a point prior to the recent software package installation. I can get into safe mode but that's all I can do.Would it be a good idea to reinstall windows, although I did it not that long ago (in the last two months or so) ? Or is there any programs that could save a hard drive. I really don't want to buy a new one. I've bought the laptop in Summer 2010 so its not too old. Although I think the vans sound quite loud and it overheats quite often, but I cannot take it off to get to them.
View 4 Replies
View Related
Feb 23, 2012
I having a problem where if i set any short-cut on my desktop to a transparent one (both made in Photoshop, and one downloaded from here [7forums]) it will work until I log off (or restart ofc).I have tried rebuilding the icon cache - again it worked until I logged off - and also tried rebuilding the thumbnail cache - but with the same resultThe Install of Windows is fairly new only about a month old and although I do have a mod that removes the short-cut arrow this was happening before that point.
View 4 Replies
View Related
Jul 2, 2011
I have an external monitor, actually a TV connected via S-Video cable coming out of the back of my video card. My TV is my second desktop. All of that is fine. The problem comes in when I log off or "switch users" (there are no other user profiles on my computer - I only log off or switch user to make sure the kids can't get on without my permission - they don't know my logon code), the TV loses the picture and goes grainy, but when I log back in, the TV does not "kick in" again. The only way to get the TV to display the second desktop after logging out or switching users seems to be to restart the computer entirely. If it reboots, it picks up the TV as second monitor again.
If you simply log in again, it does not pick up the TV as second monitor. Is this related to some setting that says the TV should only be the second monitor on the admin's account and not for "all users" or something? It is annoying to always be restarting my computer to watch a video on my TV. By the way, in all cases, the "Display" settings in control panel show the TV as the second monitor. But looking at the actual TV, all you see is a grainy screen that obviously is not being fed any clear signal.
View 1 Replies
View Related
Nov 9, 2009
my Laptop monitor can't turn off even i had change the power plan setting "when to turn of the LCD" and also download software to turn of my Laptop screen manually, the screen just turn off and it on again. I have tried many way and this problem never occur when i am using Windows Vista Home Premium.
My Laptop model is NEC Versa P9110. Anyone knoe how to solve this problem ? I have tried googling about this topic but yet still can't found any solution to solve this problem. Note : my aim is to turn off my laptop display.
View 5 Replies
View Related
Jan 11, 2013
A week ago a friend gave me a generic tower with: [code] Power supply says made in 2002, so I'll have to guess the computer was made around that time and has windows XP installed.When I got it, it would not turn on (power connections to all drives were disconnected), now she turns on (all drives, fans (2) and mouse light up) but it won't turn on the monitor (monitor works on my other tower). I hear a few beeps when powered up (three I believe), could the graphics card be bad or do you think it's something else. Just want to use it to surf the net maybe burn cd/dvd's unless what's in there is useless, then I'll gut it out and use it for something else. but for now I would like to see it turn on the monitor and show the set up screen.
View 8 Replies
View Related
Jan 29, 2013
i have a acer aspire running windows 7 with 500gb hdd and 4 gigs of ram on board graphics card. The computer turns on everything initiates like normal but the monitor wont turn on, im not getting any signal. There are no beep codes etc, also ive tried removing the little lithium battery to reset the bios and still nothing. Ive tried using a different monitor and its saying no signal. I have another computer which is having the same problem its a acer something 1 gig of ram 250 hdd and a readeon graphics card...cant remember the exact name. With this computer i was attempting to add more ram to the extra ram slots and the computer booted up and worked but i only had 2.50 gigs of ram rather than 5? So i turned it off and repositioned theram.which now i wished i hadnt, i now get no signal from either of the computers.
View 12 Replies
View Related
Nov 13, 2009
i have problem with my laptop screen can't turn off automatically even how i change the setting or even download program to turn it off manually, the screen just turn off and on again, i have found that this problem is due to my graphic driver, i downloaded the latest driver correctly from nvidia site and can't install because of the driver can't found my graphic card which is the problem that face by alot of people, and with some days of searching,
i hav successfully installed the latest driver but without the control panel and all other software in the driver package, till now even with latest driver yet my screeen still cant auto turn off automatically by changing the power plan or other method. Anyone have anyway to solve this problem ?
My Laptop model is NEV Versa P9110, Graphic Card is 8400M GS, using Ver186.81 driver from Nvidia and without any feature from the driver package and also control panel, my installation is follow the explain of torrenttg which update driver by browsing the .inf file.
View 5 Replies
View Related
Nov 25, 2009
I've installed Windows 7 Ultimate on my MSI PR200 (MS-1221). Intel (R) 965 Express Chipset Family . Current Latest Bios Version 1.5 It works perfectly.However, I want to program my screen to shut down after 2 minutes (either plugged to AC or battery mode). But it does not work. I've installed the drivers available online, at the MSI web site. Yet, the problem is not gone.
View 2 Replies
View Related
Jul 8, 2012
my monitor won't turn on after it turns off automactially (I set this to 5 minutes in windows). I've disabled sleep mode and all that jazz. I suspect it might be an ssd problem because when it won't turn on there is minimal activity with the hard disc LED light.I've also disabled sleep, hybrid sleep and the page file thingie. I just want it to turn off my monitor, not put my computer to sleep[CODE]
View 9 Replies
View Related
Oct 16, 2011
I've been having this problem for a long time now and have found various, unreliable solutions each time. The basic problem is that my computer will turn on, the fans will turn on, the mouse and keyboard turn on, the CD drive turns on, the disk access light blinks, and everything seems to be working fine, but the monitor won't turn on. I'm using dual LG monitors, connected to one of my two NVIDIA 8600 GT graphics cards which are SLI'd together.I have about a 1 in 100 chance of the monitor actually turning on (which is to say that out of about 100 tries just turning on and off the computer, the monitor will turn on). In the event that the monitor does turn on, I get the "windows did not start up correctly" error, at which point I try to run startup repair, with varying degrees of success.
About 1 in every 5 times, a system restore back to before I installed the updates on my computer will work. For the other 4 times, system restore will either fail, or when restarting the computer, the monitor again fails to turn on. However, when this does work, the updates which I had installed end up not installed, and the next time I shut down my computer, I have to repeat the same process again.I've also confirmed that it must have something to do with the system updates. If I force shut-down my computer without installing updates, I have no problems turning it back on. I'll get the start-up message that windows did not shut down correctly, and I'll be asked if I want to start in safe mode, etc. However, picking "start windows normally" works just fine. Additionally, if instead of shutting down the computer I hibernate the computer, it also starts up just fine. The problem only arises when I click "shut down" and updates are installed. Any other form of shutting down or stand-by works just fine.
View 3 Replies
View Related
Apr 19, 2012
My Monitor won't at all turn on, I have no clue to what it is, or how it happened, it was working perfectly fine about 11 hours ago from when I was last on it. I try turn on the button on the screen and it won't turn on, the computer itself is fine, it turns on smoothly, and you can hear the start-up process in the computer but the screen is black, (won't turn on).
View 3 Replies
View Related
Oct 28, 2010
When I set the power management to turn off the monitor after x minutes, the monitor is off for 1 second and it turned on automatically. I am using msi ex600 laptop.
I have tried the following:
* Unplugged the mouse
* Exit from all application's running
* Disable the network card
My bios and graphic card are updated. The hibernate option is working fine. Is there a way to find what turns on the monitor?
View 3 Replies
View Related
Jun 19, 2012
Why does my screen sometimes goes blank after a period of inactivity ( like 8 hours )? And sometimes not!. My monitor screen just turns off ( yellow light ). Then i just turn my mouse and screen goes back to normal. ITS TOTALLY RANDOM!
I disabled the screen saver and I disabled the option of the OS turning off the screen. Yet, the screen will still turn itself off after a period of inactivity. I'm currently using a Asus Monitor 19'
my pc is:
7 3770k 3.5 ghz
Asus Gtx 680
Asus Sabertooth Z77
2x4gb ram DDR3 Corsair Vengeance White 1600 LP Arctic
Be Quiet Dark Power Pro 1000W
drivers
301 WHQL.
View 2 Replies
View Related
Apr 17, 2011
so the Windows 7 Ultimate 64bit install is fresh, and all the drivers are the latest available. I have updated my mobo's bios to the latest version through Asus' "AI Suite II" which makes things very simple. I want my PC to be able to go into sleep mode but I don't want to have to force shutdown every time it goes into sleep mode after a time span. For some reason if I wake my PC after its been in sleep mode for a short period everything turns back on just fine... I know there might be a solution through the configuration panel
View 5 Replies
View Related
Oct 4, 2011
I just bought a new laptop; ASUS N55SF-S1070V, and I have to completely close the lid to turn off the monitor. My former one turns its monitor off when I close the lid for, say 45deg, and I The built-in hotkey to turn off the monitor first appeared to work, but when I looked closely, it just turn off the backlight or something. I can still see the screen's content!I'm now using some apps to force turn off the monitor, but it's a bit inconvenient.I've been wondering: is there a way to configure the angle in which the monitor will turn off automatically? I've read a post elsewhere saying there's a built-in hardware based switch that detects this action, and it can't be configured otherwise. Is this true?
View 9 Replies
View Related
Dec 30, 2012
Earlier today my dad turned on our computer to a blue screen. It told him to restart the computer if he had never seen it before, and he did. However, we cannot get it to start back up. When we press the power button, the fan runs (harder than usual), but the monitor stays asleep.
View 10 Replies
View Related
Nov 11, 2009
Can you turn UAC off for a specific program that you use regularly?
View 3 Replies
View Related
Apr 25, 2011
Im having problem with MSE turning it self off and not responding to the turn on button on the program and freezing my pc . it doesnt happen all the time but is becoming more of a problem can anyone help ?
View 1 Replies
View Related
Aug 24, 2012
I would like a way to program my notebook computer to 'turn off' not 'shut down' when I press the power button, like a desktop computer would. In Windows 7, there does not appear to be that option available in the list of available options under 'Power options'.
View 11 Replies
View Related
Aug 1, 2010
In the power settings, I set the monitor off time to 10 minutes.When I get away from my computer more than 10 minutes, an invisible program start running. It uses harddisk like crazy, and I also hear the CPU fan working faster.I used "Process Explorer" to detect this program. I see a "svchost.exe" terminating in the last second as soon as I turn the monitor on by a mouse move or keyboard input. Unfortunately I am not able to see the parent process because it terminates immediately when the monitor turns on.
View 2 Replies
View Related
Jan 24, 2013
I am starting to think I may have a power supply issue and none of the programs I use seem to monitor it correctly or the power supply is bad. I have been using TOverclocker (came with my Biostar MB), Speccy, Everest, HWinfo64, HWinfo32 and SpeedFan. None of these give me consistent measurements or measure the voltages wrong from opening the program. Is there a monitor program out there that is very good at measuring power supply voltages. My MB is a Biostar TZ68A+.
View 9 Replies
View Related
Oct 23, 2012
I am using a hp w2207h. I want a software method that easily allows me to adjust the brightness. Currently I have to go through the monitors menu using the physical buttons on the monitor.
View 6 Replies
View Related
Oct 17, 2009
Is there any way in Windows 7 to force a specific full-screen program (like a game) to open on a secondary monitor? Or does full-screen stuff only work on the primary monitor?
View 9 Replies
View Related
Dec 30, 2009
It seems like a few programs, such as Adobe Photoshop CS4 and Adobe Dreamweaver CS4 (seems to be limited to Adobe), expand past my main monitor, and reach the monitors to the left and right.
This happens when the programs are maximized.
I've included two screenshots of this issue. Notice the additional black border around the main screen (middle one).
View 1 Replies
View Related
Oct 7, 2011
window cant open this file: "what program is used to open intel turbo boost monitor"
View 1 Replies
View Related
Mar 31, 2011
I got two monitors and marked dual monitor. When I put full screen sometimes that program goes to second monitor sometimes on main monitor. I got windows 7 64bit also. When I put full screen program on second monitor the wallpaper is getting low..I will post screenshots. First one is when I run a game for example and second, normal working
OS Version: Microsoft Windows 7 Ultimate , Service Pack 1, 64 bit
Processor: AMD Athlon(tm) Dual Core Processor 5200B, AMD64 Family 15 Model 107 Stepping 2
Processor Count: 2
RAM: 4095 Mb
Graphics Card: NVIDIA GeForce 9500 GT, 512 Mb
Hard Drives: C: Total - 102822 MB, Free - 27891 MB; D: Total - 166823 MB, Free - 126027 MB; I: Total - 17500 MB, Free - 13213 MB;
Motherboard: ASUSTeK Computer INC., M2N-MX SE Plus, Rev x.xx, MF7088G00711457
Antivirus: AntiVir Desktop, Updated and Enabled
View 2 Replies
View Related
Apr 4, 2012
my monitor exhibited signs of flickering during start-up, but only minor ones and would just stop at the 'Welcome' screen of windows so I didn't give it much thought. Iv'e been using it with the cpu the same time I bought the monitor.But after some time, the flickering got worse. It went from 1-2 second interval flickers to a whole 10 seconds of blackness before it showed anything.Now,Iv'e got a new cpu but still using the old monitor. After a day or so, the monitor exhibited the first symptoms of my first cpu, so I just dismissed it. But after a week, It got a hell worse, before I even start-up my computer, the monitor doesn't show Analog/Digital at the top-left corner of the screen. PLUS my cpu keeps restarting after I pushed the ON button after 10 seconds or so. Is the monitor responsible for the restart and what could be the reason for the flickering?
View 3 Replies
View Related
Jan 20, 2013
I have a three monitor set up. Whenever I open up a browser, either internet explorer or google chrome on monitors 2 and 3, after a few seconds it automatically drags my browser into my main monitor(monitor 1, where my start button and status bar is located)
View 3 Replies
View Related
Jul 16, 2010
I have a setup with 6 monitors. Today my main monitor broke and I couldn't find a way to shut the PC down since I couldn't access the main desktop to get to the Start menu.Is there a way to change which monitor is the main monitor without having access to the current main monitor?
View 5 Replies
View Related
Aug 14, 2012
I am running a dual monitor setup with my TV hooked up via HDMI to my laptop.
Everything was working fine before, I always had the laptop as my main display yet I could play a video or a game fullscreen on the TV.
Since a couple of days, as soon as I put something in fullscreen, it immediately goes on my laptop, regardless if it's open on my TV or my laptop. I don't remember changing/installing anything that could've changed that...
I checked a bit in the AMD vision software and the Windows control pannel but I can't seem to solve my problem without switching my TV as the main display. I also made a quick search on google as well as here but the problems were mainly with Flash, which isn't in cause here.
Here are my system specs:
Toshiba Satellite L75D
Windows 7 home premium 64-bit
AMD Radeon 6520G
View 2 Replies
View Related
