A week ago a friend gave me a generic tower with: [code] Power supply says made in 2002, so I'll have to guess the computer was made around that time and has windows XP installed.When I got it, it would not turn on (power connections to all drives were disconnected), now she turns on (all drives, fans (2) and mouse light up) but it won't turn on the monitor (monitor works on my other tower). I hear a few beeps when powered up (three I believe), could the graphics card be bad or do you think it's something else. Just want to use it to surf the net maybe burn cd/dvd's unless what's in there is useless, then I'll gut it out and use it for something else. but for now I would like to see it turn on the monitor and show the set up screen.
my Laptop monitor can't turn off even i had change the power plan setting "when to turn of the LCD" and also download software to turn of my Laptop screen manually, the screen just turn off and it on again. I have tried many way and this problem never occur when i am using Windows Vista Home Premium.
My Laptop model is NEC Versa P9110. Anyone knoe how to solve this problem ? I have tried googling about this topic but yet still can't found any solution to solve this problem. Note : my aim is to turn off my laptop display.
i have a acer aspire running windows 7 with 500gb hdd and 4 gigs of ram on board graphics card. The computer turns on everything initiates like normal but the monitor wont turn on, im not getting any signal. There are no beep codes etc, also ive tried removing the little lithium battery to reset the bios and still nothing. Ive tried using a different monitor and its saying no signal. I have another computer which is having the same problem its a acer something 1 gig of ram 250 hdd and a readeon graphics card...cant remember the exact name. With this computer i was attempting to add more ram to the extra ram slots and the computer booted up and worked but i only had 2.50 gigs of ram rather than 5? So i turned it off and repositioned theram.which now i wished i hadnt, i now get no signal from either of the computers.
i have problem with my laptop screen can't turn off automatically even how i change the setting or even download program to turn it off manually, the screen just turn off and on again, i have found that this problem is due to my graphic driver, i downloaded the latest driver correctly from nvidia site and can't install because of the driver can't found my graphic card which is the problem that face by alot of people, and with some days of searching,
i hav successfully installed the latest driver but without the control panel and all other software in the driver package, till now even with latest driver yet my screeen still cant auto turn off automatically by changing the power plan or other method. Anyone have anyway to solve this problem ?
My Laptop model is NEV Versa P9110, Graphic Card is 8400M GS, using Ver186.81 driver from Nvidia and without any feature from the driver package and also control panel, my installation is follow the explain of torrenttg which update driver by browsing the .inf file.
I've installed Windows 7 Ultimate on my MSI PR200 (MS-1221). Intel (R) 965 Express Chipset Family . Current Latest Bios Version 1.5 It works perfectly.However, I want to program my screen to shut down after 2 minutes (either plugged to AC or battery mode). But it does not work. I've installed the drivers available online, at the MSI web site. Yet, the problem is not gone.
my monitor won't turn on after it turns off automactially (I set this to 5 minutes in windows). I've disabled sleep mode and all that jazz. I suspect it might be an ssd problem because when it won't turn on there is minimal activity with the hard disc LED light.I've also disabled sleep, hybrid sleep and the page file thingie. I just want it to turn off my monitor, not put my computer to sleep[CODE]
I've been having this problem for a long time now and have found various, unreliable solutions each time. The basic problem is that my computer will turn on, the fans will turn on, the mouse and keyboard turn on, the CD drive turns on, the disk access light blinks, and everything seems to be working fine, but the monitor won't turn on. I'm using dual LG monitors, connected to one of my two NVIDIA 8600 GT graphics cards which are SLI'd together.I have about a 1 in 100 chance of the monitor actually turning on (which is to say that out of about 100 tries just turning on and off the computer, the monitor will turn on). In the event that the monitor does turn on, I get the "windows did not start up correctly" error, at which point I try to run startup repair, with varying degrees of success.
About 1 in every 5 times, a system restore back to before I installed the updates on my computer will work. For the other 4 times, system restore will either fail, or when restarting the computer, the monitor again fails to turn on. However, when this does work, the updates which I had installed end up not installed, and the next time I shut down my computer, I have to repeat the same process again.I've also confirmed that it must have something to do with the system updates. If I force shut-down my computer without installing updates, I have no problems turning it back on. I'll get the start-up message that windows did not shut down correctly, and I'll be asked if I want to start in safe mode, etc. However, picking "start windows normally" works just fine. Additionally, if instead of shutting down the computer I hibernate the computer, it also starts up just fine. The problem only arises when I click "shut down" and updates are installed. Any other form of shutting down or stand-by works just fine.
I assume something is polling the web or keeping my monitors alive but I can't figure it out.nothing has changed in my setup other than a possible windows update but in the last few weeks my screensaver stays on 24/7.I played with it today and got it to shut off but i set the screen off time at 2 minutes, just 1 minute after the screen saver.I am using ultramon on a dual monitor setup. and for a screensaver I am using gPhotoShow. (allows separate/distinct slideshows for each monitor) as I have been for several years.my assumption is something is now polling the net or doing some activity that is preventing the monitor from sleeping. So I'm wondering if there is a logging program that I can use to track this down. i did hijack this but that isn't helping (as far as I can tell)
My Monitor won't at all turn on, I have no clue to what it is, or how it happened, it was working perfectly fine about 11 hours ago from when I was last on it. I try turn on the button on the screen and it won't turn on, the computer itself is fine, it turns on smoothly, and you can hear the start-up process in the computer but the screen is black, (won't turn on).
When I set the power management to turn off the monitor after x minutes, the monitor is off for 1 second and it turned on automatically. I am using msi ex600 laptop.
I have tried the following: * Unplugged the mouse * Exit from all application's running * Disable the network card
My bios and graphic card are updated. The hibernate option is working fine. Is there a way to find what turns on the monitor?
Why does my screen sometimes goes blank after a period of inactivity ( like 8 hours )? And sometimes not!. My monitor screen just turns off ( yellow light ). Then i just turn my mouse and screen goes back to normal. ITS TOTALLY RANDOM!
I disabled the screen saver and I disabled the option of the OS turning off the screen. Yet, the screen will still turn itself off after a period of inactivity. I'm currently using a Asus Monitor 19'
my pc is: 7 3770k 3.5 ghz Asus Gtx 680 Asus Sabertooth Z77 2x4gb ram DDR3 Corsair Vengeance White 1600 LP Arctic Be Quiet Dark Power Pro 1000W drivers 301 WHQL.
so the Windows 7 Ultimate 64bit install is fresh, and all the drivers are the latest available. I have updated my mobo's bios to the latest version through Asus' "AI Suite II" which makes things very simple. I want my PC to be able to go into sleep mode but I don't want to have to force shutdown every time it goes into sleep mode after a time span. For some reason if I wake my PC after its been in sleep mode for a short period everything turns back on just fine... I know there might be a solution through the configuration panel
I just bought a new laptop; ASUS N55SF-S1070V, and I have to completely close the lid to turn off the monitor. My former one turns its monitor off when I close the lid for, say 45deg, and I The built-in hotkey to turn off the monitor first appeared to work, but when I looked closely, it just turn off the backlight or something. I can still see the screen's content!I'm now using some apps to force turn off the monitor, but it's a bit inconvenient.I've been wondering: is there a way to configure the angle in which the monitor will turn off automatically? I've read a post elsewhere saying there's a built-in hardware based switch that detects this action, and it can't be configured otherwise. Is this true?
Earlier today my dad turned on our computer to a blue screen. It told him to restart the computer if he had never seen it before, and he did. However, we cannot get it to start back up. When we press the power button, the fan runs (harder than usual), but the monitor stays asleep.
my monitor exhibited signs of flickering during start-up, but only minor ones and would just stop at the 'Welcome' screen of windows so I didn't give it much thought. Iv'e been using it with the cpu the same time I bought the monitor.But after some time, the flickering got worse. It went from 1-2 second interval flickers to a whole 10 seconds of blackness before it showed anything.Now,Iv'e got a new cpu but still using the old monitor. After a day or so, the monitor exhibited the first symptoms of my first cpu, so I just dismissed it. But after a week, It got a hell worse, before I even start-up my computer, the monitor doesn't show Analog/Digital at the top-left corner of the screen. PLUS my cpu keeps restarting after I pushed the ON button after 10 seconds or so. Is the monitor responsible for the restart and what could be the reason for the flickering?
I have a three monitor set up. Whenever I open up a browser, either internet explorer or google chrome on monitors 2 and 3, after a few seconds it automatically drags my browser into my main monitor(monitor 1, where my start button and status bar is located)
I have a setup with 6 monitors. Today my main monitor broke and I couldn't find a way to shut the PC down since I couldn't access the main desktop to get to the Start menu.Is there a way to change which monitor is the main monitor without having access to the current main monitor?
I am running a dual monitor setup with my TV hooked up via HDMI to my laptop.
Everything was working fine before, I always had the laptop as my main display yet I could play a video or a game fullscreen on the TV.
Since a couple of days, as soon as I put something in fullscreen, it immediately goes on my laptop, regardless if it's open on my TV or my laptop. I don't remember changing/installing anything that could've changed that...
I checked a bit in the AMD vision software and the Windows control pannel but I can't seem to solve my problem without switching my TV as the main display. I also made a quick search on google as well as here but the problems were mainly with Flash, which isn't in cause here.
Here are my system specs:
Toshiba Satellite L75D Windows 7 home premium 64-bit AMD Radeon 6520G
I have just did a clean install of Windows 7 ultimate from XP and I am unable to get my dual monitors to work like they did in XP.
I have a DVI Radeon graphics card plugged into the agp slot, and a Nvidia geforce vga adapter plugged into a pci slot of my dell optiplex 755. When I am in the screen resolution settings the second monitor cannot be detected.
In bios I have 2 options under primary video adapter and they are auto, and onboard card. When set to auto the Nvidia card gets a signal but the Radeon does not. There are no conflicts in the device manager, and all of the drivers are up to date.
When I change the bios option to onboard card the Radeon adapter gets a signal but the other monitor cannot be detected and in device manager there is a yellow exclamation mark next to Standard VGA adapter and a code 10 error that states the device could not be started.
I have powered down, and unplugged every cable, I also tried to use the integrated VGA adapter to the Intel G31/G33/Q33/Q35 Graphics Controller but the computer will not even boot. I get
"System Halted
Attention Unsupported Video Configuration Detected"
I have two monitors, both work fine as standalone but Windows will not detect either as a secondary.
Please help me someone, I am so used to having my helpdesk email open in one monitor and all of my other work in the other monitor.
This computer is running an ATI Radeon HD 2400 Pro. It does support dual monitors...(I've had dual monitors active on this card before, but never on Windows 7.) But since installing windows 7, I can't even get it to detect the second monitor. I want to run the setup with the CRT as the primary monitor and the HD as the secondary.
I recently had an older HP Pavilion Media Center m7760n Desktop PC rebuilt. The old power supply fried the motherboard so I need to get a new power supply and motherboard. Here are my current specs.
Mainboard : Asus P5QPL-VM EPU Chipset : Intel G41 Processor : Intel Core 2 Duo E6420 @ 2133 MHz Physical Memory : 2048 MB (2 x 1024 DDR2-SDRAM ) Video Card : Intel(R) G41 Express Chipset (Microsoft Corporation - WDDM 1.1) Hard Disk : WDC (1000 GB)
[code]....
As you can see from above, the "video card" is actually integrated into the motherboard.The computer works perfectly except for one major problem. I have 2 monitors, one is 22" with 1680 x 1050 resolution and the other is a 15" monitor with 1024 x 768 resolution. At the back of my computer I have a VGA port and a DVI port. The 15" is connected to the VGA port and the 22" is connected to the DVI port.When first starting the computer, the 15" monitor was recognized as the primary monitor while the 22" was recognized as the secondary monitor. No problem. I simply went to the display settings and set the 22" to be the primary monitor and the 15" to be the secondary monitor. Unfortunately, this setting seems to reset as soon as I reboot the computer. The 15" is always set as the primary monitor on start up, forcing me to set the proper settings all over again. What's worse is that even after I have set the proper settings, they sometimes revert back when using Media Center or other programs. Worse yet, sometimes the monitors both go completely black ... as if the monitor settings were about to switch but got locked up some how.I'm assuming that perhaps the on board video has a primary port (VGA) and a secondary port (DVI) but even still, shouldn't Windows 7 be able to over-ride this and save these settings so that the monitor settings remain the same during startup and regular usage?
My printer keeps giving me the error message "A printer error has occurred, turn off the printer, then press on button to turn on. See your documentation" I have unistalled it held down the on button and cancel button at the same time to print a test paper, but still can't get anything to print.
I'm using a television (32p) as a second monitor in extended mode so that I can watch a movie in the TV and play a game in the monitor (this was my main goal). Monitor and TV lays in two different ambients, both connected to the same pc, one by normal VGA cable and the other by HDMI. I managed to differentiate the audio output so that VLC player sends it's audio to the HDMI (so that only the TV plays it) and the rest of system sounds, media players and games outputs to the speakers (basically only the VLC audio is directed to another output device). I reached my goal so that I can watch a movie fullscreen in the TV and play a game in the monitor fullscreen too without any interference from one another (nor audio or video).
The thing is, because I have the TV in another ambient I can't actually see what's going on in it, as I just "throw" the VLC window to the TV from my main monitor. And here's the question: There's a way to see the TV's desktop in my monitor? Without having to set it as main monitor so to not really switch between desktops.. The perfect thing would be if I could see the TV's desktop in a window like in remote desktops applications.
I have AT&T DSL and it just drops out, I have a 2 wire router and the DSL and Internet lights will flash red when it drops, I have had this problem for almost a year and AT&T will run a useless test and tell me everything is fine. I have searched for 3 days trying to find a Broad Band Monitor to let me know when it drops and for how long, also how many times while I am at work, or just not on the PC.
was just wondering if this is possible? can i set my PC to hibernate and then tell it to come out of hibernation at a certain time - like say, an hour later?
I had only used it for a day and then the next day it wouldn't even turn on. I have tried everything that I can think of to fix it. From unplugging it and plugging it back in, changing out the power cord with a different one, trying to plug it into a different location in the house, turning the surge protector on and off, etc. I opened the side up and everything seemed to be in place and nothing was obviously unplugged. We do have a warranty but when we called we got put on hold for an hour + and gave up. We will probably call them again Monday I just wondered if there was something else that I should try before calling it quits and switching the computer out completely.
I just got a new system with Win 7.I've been using XP since 2002 and I first used Windows in 1989 (version 2.11). The new computer is for my sole personal use.Because I dont need a nanny operating system I have turned UAC off. Being an adult I'll take full responsibility if I break something.Is there some way I can also turn off all this ACL stuff. I don't need it - its my computer, its my data, and I am the only person who uses the computer.If that means a reinstall then I can do that - I bought a Win 7 Pro 64bit licence. The only reasons I got 7 were symbolic links and libraries, but I'm wasting so much time jumping over needless security hurdles that I've yet to even look into them.I know all this stuff is relevant in a corporate environment - but this is my personal computer, its probably the last one I'll have - I dont need the hassle.
After a Windows update today I noticed when I went to turn off my PC that there was some sort of Message pop up on the Desktop just before it shut Down. I was unable to read it so I did another restart and shut down and again got something that pop up on the Desktop again just as it shut down and I dont have a clue what it is
