I have tried to get the ms fax on my 64bit computer to work but get an error message saying" an unexpected error has occurred" what do I do? The modem is a c net 56k v92 modem and the device manager says its working properly.I did initially try to install an old Duxburry Modem but it did not have the correcr drivers so took the card out and put the new cnet internal modem in.I do notice e that there is no audible dialing to be heard when I say send the fax. My old machine had a very distinct audio of the dialing out.
I have a peculiar problem with aero peek. It sometimes just decides not to work anymore, and only shows labels instead of a preview. This is only temporary, because when I switch between other windows, the aero peek is activated again. I actually reproduced this behavior by switching to this post, and writing for 1-2 minutes. Hovering now only produced labels/tooltips. By switching to another window, aero was "activated" again.
I purchased a new Asus laptop a few weeks ago with Windows 7 Home Premium installed. The laptop has Conexant Cocoa II High Definition SmartAudio speakers. The problem I'm having is in regards to the sound I am getting from both my laptop speakers and my external speakers which plug into the headphone port not having any bass. When I have my external speakers plugged into my old laptop running Windows XP the sound is fine and all speakers and subwoofer work, so I know it is all wired properly. When I unplug from my old laptop and plug it into my new one with Windows 7, there is no bass being played. The subwoofer doesn't work and the bass that usually comes from the speakers is not present, and turning up the subwoofer doesn't do anything. I've tried to use the "Bass Management" enhancement feature in the speaker properties, but it has no effect. The only thing I've been able to find that will lead to the sound having bass, is when I enter the set-up for the "Room Correction" feature in the enhancement tab for the speaker properties. During the set-up, the sound has bass, but as soon as the set-up finishes the sound returns to having no bass. The odd part is when sound is playing out of just the laptop speakers, the "Room Correction" set-up menu causes bass to be played out of them too. So I know my laptop has the potential to play bass, it just seems like something is stopping it. I cannot find any equalizer feature. My laptop didn't have Realtek when I got it, but I've downloaded the latest version and installed it (I think) but it hasn't changed anything.
how do I solve this problem?every time i run MOHPA, this message always pop up."A Problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available"
On windows 7 64 bit the start button(orb) does not load Right click does? I have scanned for viruses and restarted in last good configuration When I reboot I get one go at the start button and it works but never again I use a Toshiba Qosmio laptop.
I have a PC with a Gigabyte mother board and an i3 processor with 8gig ram and 2 tb hard drive. When I got the computer, it was running Windows 7 Ultimate 32 bit. Once I checked the computer, and found it was 64 bit compatible, I installed the 64 bit version. I did this as a new install. I have had nothing but problems since. I have an intelli mouse which clicks away when I try to go back or forward on a web page. If I try to check a box, it checks and then automaticaly unchecks. I have to keep clicking on it until the check stays. Some web pages won't even work, ie Bank of America Website. I can go to anything I want to except My Portfolio. It causes IE9 to shut down. When I try to open programs, it opens multiple times. I have formatted and re-installed again, but still have the same problems.
I have windows 7 on a acer notebook and able to use my HP 5610xi w/no problem. I recently bought an acer desktop emachine el1352g and cannot use my hp or some other software. It says that product cannot be installed with operating system. The only difference i can see is that the emachine desktop is a 64bit processor. I tried to go through hp (download driver) website but got no where.
My Gateway 64bit Windows 7 keyboard stopped working....3 USB ports are not recognized. Everything worked perfect but for some reason on updating my computer the keyboard flashes on bootup then no response..
I have recently downloaded Windows 7 - 32 bit onto a new discrete (i.e. Physically separate) HDD. In the installation process it had severe problems with USB and PCIe drivers. That is they don't work and there were! marks in Device Manager. I was lucky in having access to an old PS2 kybd which allowed me some access to the new os. Luckily, since I was booting off of a Windows XP Home Edition on a separate HDD I managed to use its drivers which worked on the Windows 7 and allowed me to get my USB kyybd and mouse working again. It also automatically down loaded the other drivers for my devices like the USB dongle for wireless internet access.
This is a long preamble to my actual problem and the reason for this message. I have not had as much success when I tried the same exercise; this time with Windows 7 - 64 bit installation. The 64 bit was installed on a separate partition on the same physical drive as the 32 bit version. The 32 bit drivers from Win 7 - 32 bit and XP don't work. I thought the 32 bit drivers for such basic things as USB pointing devices would work in the 64 bit version; but clearly not. Also, clearly my installation disk is negligent in not loading the drivers in either installation. Where can I go to get these basic drivers.
I have tried Logitech with no luck as my kybd/mouse combo doesn't even show up on their site. I have tried going to Microsoft site to get generic 64 bit drivers but they are not being very kind in that regard. There is nothing to download. Clearly they don't want to give anything away free! My Logitech USB kybd/mouse combo is model Y-RK56A for the kybd and M-RR95 for the mouse. My mobo is a Gigabyte GA-880GA-UD3H and I have its CD but w/o mouse I can't get it to install on the Win 7-64 partition. I thought when it installed on my XP partition it would have installed both sets of drivers. Can I extract just the 64 bit USB drivers from there?
I recently built a new computer using Windows 7 Ultimate 64bit, and it is fully up to date. I am trying to run 3D Studio Max 2009 32bit but it wont run. The splash screen will show for a few milliseconds, then disappear, and nothing will happen.My old computer had Windows 7 Home 64bit, and I could run the same copy of 3D Studio Max 32bit easily.3D Studio Max 2009 64bit runs perfectly, just not the 32bit version (both installed at the same time). I absolutely need to use the 32bit version because I have to use a custom exporter / plugin that only works with the 32bit 3DSM.
I have recently upgraded my Window from WIN Vista to WIN 7 (64 bit) professional on my laptop ( built Acer 6935 G) g
Initially the windows installed a default driver which was working fine , but I Had to make my 5.1 speakers work. In order to do that I downloaded realtek latest drivers from your other threads which is still not helping me out. Now, All my sound system now are working fine but still the MIC is not working .
I installed explorer 9 on a Win 7 64bit system. It seemed to work well until I installed the recommended updates, over 70 of them. Now when I start Internet explorer it seems to be coming up but it leaves the main window white with no other information.
My old Office 2003 is unable to work normally on new Windows 64 bit Dell. Old files (transferred from old computer) and New Documents created on new computer using Word fail to open immediately and require User Account action from winword.exe every time I try to open any document (several steps). Any way to resolve this short of buying Office 2010?
I have a Dell INspiron 1525 laptop with Windows 7 Ultimate 64 bit on it. My windows media player will not work. Cannot play CD's or burn them. How do I fix this?
I downloaded some audio programs and afterwards ie9 64bit would not work (32bit Does). I tried uninstalling and reinstalling but the update failed. After removing the programs ie9 installed but 64bit would not load any web sites. I have tried resetting ie9, flushing the dns etc using "SF IE9 RESTORATOR" all to no avail. google chrome and opera are working fine.
I have just installed Win 7 64 bit onto a partition on my machine:
After suggestions from Torrentg and BlackRoseMD1 (many thanks again) on this forum I have upgraded my BIOS to version 1801 and attempted to install the nVidia 195.39 beta driver. Unfortunately the result was the same. The install gets to about 40% then both screens go black.
After about 30 secs to a minute the secondary monitor shows a garbled desktop after which it to goes black. After a further minute or so the system reboots and checks the disk for errors - continuing, the screens go black just after the win 7 logo disappears.
Havin a problem with operation Flashpoint 2 & win7 64bit. when I launch the game everything runs fine up to when I load the first mission. at this point the game crashes to desktop with the message "game.exe has stopped working". This makes no sense to me as I have been running this game on this Rig for a month now with no problems whatsoever.
I have been running the game through a 9600gt gpu but it sadly died a couple of weeks ago which meant I had to step down to my previous 8600gt. This is where I believe my problem lies although I have checked the game requirments and the 8600gt easily fits the requirments needed. can somebody please shed some light on a possible solution to this very annoying problem?
Windows Mobile Device Center doesn't work with Outlook 2010 if installed as 64 bit. Microsoft says to "fix" this by uninstalling Office 2010 and installing the 32 bit version!My question is are there any 3rd-party sync programs that will work with Windows 7 64 bit and Microsoft Office Outlook 64 bit and Windows Mobile 6.5 devices? I don't need to sync email but I do need to sync calendar, contacts, and tasks. And yes, I am aware that the iphone will sync with it! Silly Microsoft. I have 1.5 years left on my mobile contract with my Windows Mobile 6.5 phone?
I have Windows 7 Ultimate 64-bit, and never had any problem installing 64-bit programs. Now, when a try to install any 64-bit programs it shows a message of incompatible version of the program with the running Windows, but my Windows 7 is 64 bits.
My computer got the BootMGR is missing problem, which I have had in the past which is not that big. I insert the Windows 7 64 Ultimate disk it starts up everything fine, press repair my computer and it finds the installation. But when I press on it and next it has an error pop up saying "This version of system recovery options is not conpattble with the version of windows you are trying to repair. Try using a recovery disc that i compatible with this version of Windows." If I dont select anything but press next it allows me to look at the screen Im supposed to, but if I go to command prompt or click autmatically repair nothing will be saved or changed. This is the same disc I installed Windows with and repaired it several times. But I did have to reset BIOS earlier so this may have affected something.
The problem likely started when I cloned my drive to a new Seagate drive using a Seatools *Seagate** utility, which I believe is actually made by Acronis. The final fix was installing new drivers for the Hard drive from Intel "Intel Rapid Storage Technology"
Symptoms = Failure code when trying to start indexing = 0x8e5e0247 Search function would not work properly Indexing was not working Could not get Windows update to install
windows 7 indexing is not running acronis clone Intel Rapid Storage Technology 0x8e5e0247 windows update not working
I have a HP dv6910us Pavilion and the DVD is not listed in Device Manager. DVD Tray opens and light comes on but does not play DVD. 1st USB port on left side gets - USB Device Not Recognized.One under it works and one on the right side works.OS Windows7 Ultimate. It is running kind of screwy so I wanted to reinstall Windows7 but with the DVD not operating Can't do it. Seems like maybe something in the register got erased or corrupted. If I can get the DVD and USB port to work I won't have to reinstall Windows 7
i have a problem with my mouse cursor.... when it is performing something it become busy... right.. and sometimes the mouse cursor will rotate... or the working in background.... it doesnt rotate anymore.. i mean the windows aero scheme.. i am using a windows 7 os... i dnt know what is the problem,.. i alreay have the tuneup utilities 2010.. still no progree.. plls help me resolve my problem
I'm using Windows 7 Home Premium.My wireless connection has been working on and off for a while, but now it just refuses to work.The other computers in the wireless network are working just fine, so it must be definitely something in my laptop.I can detect the network just fine, with good signal.It says:
Media State: Enabled IPv4 Connectivity: No internet access IPv6 Connectivity: No internet access
Also, in the activity there are Bytes sent and received, but I cannot connect to any webpage either with Chrome of Firefox I'm using McAfee Security Center. I tried turning off the firewall, but it still doesn't work.
I want to upgrade from the ancient Windows XP to 7. I currently have 2GB in memory (i have more in stock, but with the limitations on the 32-bit client, it won't affect anything). I want a total of 8GB Memory to have a smoother time with my computer.According to my specs, I am running a AMD Athlon x2 250. I am currently running Windows XP 32-bit. I want to upgrade to Windows 7 64-bit. I know that my CPU is in the X86 family. As with that, I will not be able to run the 64-bit version of Windows 7. But according to spec of the CPU, it says it has 64-bit support.
Both in window properties and task manager, system is displaying 2.73gb, although i have 4gb installed. Bios shows all memory working in dual channel mode, and CPUZ displays all 4 sticks present. I had this problem when i was on 32bit.
The OS is a clean install, not upgrade. Version is Ultimate 64bit , SP1. Using andAMD 4400+ @ stock 2.20GHz.
I have been having issues with the dreaded "Display driver amdkmdap stopped responding and has successfully recovered." and have gone through the gambit of solutions posted on the web with no success.
While looking through the event viewer i found that exactly 1 second before every single "Display driver amdkmdap stopped responding and has successfully recovered." error.
