No Bass And Subwoofer Not Working In Windows 7 64bit
Apr 18, 2010
I purchased a new Asus laptop a few weeks ago with Windows 7 Home Premium installed. The laptop has Conexant Cocoa II High Definition SmartAudio speakers. The problem I'm having is in regards to the sound I am getting from both my laptop speakers and my external speakers which plug into the headphone port not having any bass. When I have my external speakers plugged into my old laptop running Windows XP the sound is fine and all speakers and subwoofer work, so I know it is all wired properly. When I unplug from my old laptop and plug it into my new one with Windows 7, there is no bass being played. The subwoofer doesn't work and the bass that usually comes from the speakers is not present, and turning up the subwoofer doesn't do anything. I've tried to use the "Bass Management" enhancement feature in the speaker properties, but it has no effect. The only thing I've been able to find that will lead to the sound having bass, is when I enter the set-up for the "Room Correction" feature in the enhancement tab for the speaker properties. During the set-up, the sound has bass, but as soon as the set-up finishes the sound returns to having no bass. The odd part is when sound is playing out of just the laptop speakers, the "Room Correction" set-up menu causes bass to be played out of them too. So I know my laptop has the potential to play bass, it just seems like something is stopping it. I cannot find any equalizer feature. My laptop didn't have Realtek when I got it, but I've downloaded the latest version and installed it (I think) but it hasn't changed anything.
View 9 Replies
ADVERTISEMENT
May 22, 2012
subwoofer not working in windows 7,but it showing speakers working properly and there is no sound from the system
View 1 Replies
View Related
Oct 12, 2009
I just installed Win 7 and I have a 7.1 setup, but my subwoofer is not working. I'm pretty sure it's a driver/config issue, because all wiring is OK and it was working on XP some hours ago. I have an Audigy 2 ZS, but I also tried my onboard Realtek High Definition Audio, but the subwoofer does not work.
Anyone experiencing that / any tips for me ?
Edit: So, anyone got the Audigy 2ZS to work yet?
View 6 Replies
View Related
Jun 17, 2012
I'm trying to config my sound system and sub out only works in "test" actually now it doesn't work at all! the rest of my speakers work fine for the most part.
I have tried everything I can think of and this is really getting to me, I use my computer for movies, netflix, music quite often. I'm pretty sure I'm running realtec HD audio....Or Sigmatel?
View 9 Replies
View Related
Oct 12, 2012
I just got a new Dell monitor and my Bass fishing game doesn't run right. I am running Windows 7 64 bit. All i get is the audio and no video. i get a black screen that says 1: Analog input cannot display this video. All the other older games i have run fine except this one. I have a Dell™ 1707FP AIO Color Monitor. I have tried every compatibility mode you can think of but it keeps doing the same thing. Not sure if it's the OS or the monitor. Looked thru the monitor manual and could find nothing relating to it.
View 2 Replies
View Related
Dec 8, 2011
I just installed Win 7 x64... (PReviously using Winxp)Everything is perfect except 1 thing.... my woofer aint giving any sounds previously in WinXP there is a setting to activate it but now in Creative Audio Control Panel.i dont see it although in Win 7 sound manager, there is bass boost included in the enhancement but i cannot do anything.
View 7 Replies
View Related
Jan 16, 2013
Iv had this for a few months I am REALLY but really sick of it, i have no idea how to fix it.Im using onboard sound realtek HD, latest driver installed. My problem is that sometimes my sound goes really high when there isnt any bass playing. When high bass, the sound goes lower. Im also using headphones. I feel like there is something that lowers my sound when there is alot of bass, or that my computer cant handle high bass. Heres my dx spec:[CODE]
View 2 Replies
View Related
Jan 11, 2012
I want to configure my bass on my trust 5.1 sorround sound headset, but i dont know how to do that..
View 2 Replies
View Related
Dec 28, 2010
When I plug in my headphones I can still hear sound coming from my computer, I checked and found out that it is actually coming from my computer's subwoofer, the only way to disable it is to actually lower the volume down to 0, even using mute will not turn off the subwoofer and will still play at the volume it is left at. I have tried searching for what could cause the problem, trying every possible combination of sound drivers that could be the source of the issue but I cant find the solution, does anyone know what could be happening? Windows has no information on these things and it seems to be something unique since I cant find a similar problem on google.
View 18 Replies
View Related
Jun 13, 2012
I just got a dedicated subwoofer today (by dedicated I mean one meant to go into a receiver for a home theater) and I'm trying to set it up as part of my 5.1 set up for my computer. My set up is actually kind of ghetto in a sense. I have two, two piece speakers that are probably meant to be 2.0 set ups separately, all hooked up to my computer and ran as a 5.1 set up. Till today I was just missing a subwoofer and I saw a deal at Best Buy for an Insignia NS-RSW211 for $25 and decided to get one thinking that it'd be a piece of cake set up. Well after an hour of installing and uninstalling drivers I'm still at square one with my set up. The problem is that on my motherboard, the Center and Subwoofer channels are combined into one even though I have six channels on the board. I linked some pictures of my set up in the Realtek client. When I have the "Swap Center" feature on, I have no center but the bass plays out of the sub. However when I have "Swap Center" off, the bass plays out of the center and nothing comes out of the sub. I've been surfing a lot of different forums and no one really has a good solution besides buying a dedicated sound card.
View 18 Replies
View Related
Dec 1, 2009
I recently bought an Acer Aspire 7738G laptop with Windows 7. After a day or two the speakers (in fact i think it was the internal subwoofer) started to make a loud grinding noise which was intermittant but which became increasingly prevalent. It seemed sometimes to be brought on by my going online or somethin like that whilst music was playing, but sometimes started on it's own. Thinking it was a hardware problem I changed my laptop for exactly the same model. Unfortunately however after a few days exactly the same thing has started to happen.
I don't think I am the only one to have had this problem (see link below) and I wonder if it's aproblem with Windows 7 and Acer internal subwoofers. I am not a techy and all I can think to do is to take this laptop back and get a non Acer one. I'd rather not go through all that again (transferring itunes alone is a pain let alone getting the computer to perform in the shop).
Please let me know therefore if there is a simple fix to save me the trouble.
View 1 Replies
View Related
Dec 22, 2009
Is there way to adjust treble/bass globally in win 7?
Other than volume, I can't seem to find a something similar to iTunes which can help fix my sound quality.
I have cheap desktop speakers and a mini subwoofer -- the bass needs to be turned down.
View 4 Replies
View Related
Nov 23, 2009
My problem is that i don't get any bass out of my subwoofer, my system (as i configurate) recognizes my subwoofer, but as soon as i listen to music there's no sound coming out of it!
My other speakers work, but only the bass is missing!
I wanted to install the console launcher from CD, but in Setup windows said "couldn't find any compatible hardware. Setup will be closed"
But i do not find any latest console launcher in Creative technical support, that's compatible with my Live 24 bit soundcard.
I started this thread, because i couldn't contact any other user who's problem was solved .
View 1 Replies
View Related
Jun 20, 2009
I have Creative Sound Blaster Live 5.1 running with EMU10K1 driver on Windows 7 7260 x86 build.
Sound is OK, but there is a problem with Bass and Trebele Control - this control is freeze on minimum and doesn't work.
View 7 Replies
View Related
Dec 18, 2012
I've installed the new computer and added some new speakers, i.e. Logitec Z623. These speakers have been installed less than two weeks and I've noticed that the volume is less and there is very little vibration or bass coming from the sub-woofer.
View 6 Replies
View Related
Nov 12, 2011
how to connect 4.1 creative M4500 subwoofer to dell N5010 lap coz my lap have not 2 3.5mm jack only have mic and line out jack so if there is a method to connect this sub
View 3 Replies
View Related
Dec 4, 2011
I have tried to get the ms fax on my 64bit computer to work but get an error message saying" an unexpected error has occurred" what do I do? The modem is a c net 56k v92 modem and the device manager says its working properly.I did initially try to install an old Duxburry Modem but it did not have the correcr drivers so took the card out and put the new cnet internal modem in.I do notice e that there is no audible dialing to be heard when I say send the fax. My old machine had a very distinct audio of the dialing out.
View 1 Replies
View Related
Aug 12, 2010
I have a peculiar problem with aero peek. It sometimes just decides not to work anymore, and only shows labels instead of a preview. This is only temporary, because when I switch between other windows, the aero peek is activated again. I actually reproduced this behavior by switching to this post, and writing for 1-2 minutes. Hovering now only produced labels/tooltips. By switching to another window, aero was "activated" again.
View 2 Replies
View Related
Oct 22, 2010
how do I solve this problem?every time i run MOHPA, this message always pop up."A Problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available"
View 4 Replies
View Related
Jun 14, 2012
On windows 7 64 bit the start button(orb) does not load Right click does? I have scanned for viruses and restarted in last good configuration When I reboot I get one go at the start button and it works but never again I use a Toshiba Qosmio laptop.
View 3 Replies
View Related
Aug 14, 2012
I have a PC with a Gigabyte mother board and an i3 processor with 8gig ram and 2 tb hard drive. When I got the computer, it was running Windows 7 Ultimate 32 bit. Once I checked the computer, and found it was 64 bit compatible, I installed the 64 bit version. I did this as a new install. I have had nothing but problems since. I have an intelli mouse which clicks away when I try to go back or forward on a web page. If I try to check a box, it checks and then automaticaly unchecks. I have to keep clicking on it until the check stays. Some web pages won't even work, ie Bank of America Website. I can go to anything I want to except My Portfolio. It causes IE9 to shut down. When I try to open programs, it opens multiple times. I have formatted and re-installed again, but still have the same problems.
View 1 Replies
View Related
Jun 28, 2011
I have windows 7 on a acer notebook and able to use my HP 5610xi w/no problem. I recently bought an acer desktop emachine el1352g and cannot use my hp or some other software. It says that product cannot be installed with operating system. The only difference i can see is that the emachine desktop is a 64bit processor. I tried to go through hp (download driver) website but got no where.
View 5 Replies
View Related
Jun 30, 2011
My Gateway 64bit Windows 7 keyboard stopped working....3 USB ports are not recognized. Everything worked perfect but for some reason on updating my computer the keyboard flashes on bootup then no response..
View 1 Replies
View Related
Apr 1, 2012
I have recently downloaded Windows 7 - 32 bit onto a new discrete (i.e. Physically separate) HDD. In the installation process it had severe problems with USB and PCIe drivers. That is they don't work and there were! marks in Device Manager. I was lucky in having access to an old PS2 kybd which allowed me some access to the new os. Luckily, since I was booting off of a Windows XP Home Edition on a separate HDD I managed to use its drivers which worked on the Windows 7 and allowed me to get my USB kyybd and mouse working again. It also automatically down loaded the other drivers for my devices like the USB dongle for wireless internet access.
This is a long preamble to my actual problem and the reason for this message. I have not had as much success when I tried the same exercise; this time with Windows 7 - 64 bit installation. The 64 bit was installed on a separate partition on the same physical drive as the 32 bit version. The 32 bit drivers from Win 7 - 32 bit and XP don't work. I thought the 32 bit drivers for such basic things as USB pointing devices would work in the 64 bit version; but clearly not. Also, clearly my installation disk is negligent in not loading the drivers in either installation. Where can I go to get these basic drivers.
I have tried Logitech with no luck as my kybd/mouse combo doesn't even show up on their site. I have tried going to Microsoft site to get generic 64 bit drivers but they are not being very kind in that regard. There is nothing to download. Clearly they don't want to give anything away free! My Logitech USB kybd/mouse combo is model Y-RK56A for the kybd and M-RR95 for the mouse. My mobo is a Gigabyte GA-880GA-UD3H and I have its CD but w/o mouse I can't get it to install on the Win 7-64 partition. I thought when it installed on my XP partition it would have installed both sets of drivers. Can I extract just the 64 bit USB drivers from there?
View 7 Replies
View Related
Sep 6, 2012
printer driver not working for HP laserjet 6P in windows 7 64bit?
View 2 Replies
View Related
Sep 19, 2012
I recently built a new computer using Windows 7 Ultimate 64bit, and it is fully up to date. I am trying to run 3D Studio Max 2009 32bit but it wont run. The splash screen will show for a few milliseconds, then disappear, and nothing will happen.My old computer had Windows 7 Home 64bit, and I could run the same copy of 3D Studio Max 32bit easily.3D Studio Max 2009 64bit runs perfectly, just not the 32bit version (both installed at the same time). I absolutely need to use the 32bit version because I have to use a custom exporter / plugin that only works with the 32bit 3DSM.
This is a clean install of Windows 7 Ultimate.
Specs:
i7 3930K
Gigabyte G1 Assassin 2 Mobo
Gigabyte Geforce GTX 680
32GB G-Skill DDR3 RAM
OCZ 128GB SSD
Velociraptor 1TB HDD
View 21 Replies
View Related
Dec 29, 2012
I have a protected dvd its working in win 7 32 bit but when i insert in 64 bit operating system its showing "cannot find any protected dvd".
View 2 Replies
View Related
Aug 17, 2012
I have recently upgraded my Window from WIN Vista to WIN 7 (64 bit) professional on my laptop ( built Acer 6935 G) g
Initially the windows installed a default driver which was working fine , but I Had to make my 5.1 speakers work. In order to do that I downloaded realtek latest drivers from your other threads which is still not helping me out. Now, All my sound system now are working fine but still the MIC is not working .
View 1 Replies
View Related
May 16, 2011
I installed explorer 9 on a Win 7 64bit system. It seemed to work well until I installed the recommended updates, over 70 of them. Now when I start Internet explorer it seems to be coming up but it leaves the main window white with no other information.
View 1 Replies
View Related
Mar 1, 2012
My old Office 2003 is unable to work normally on new Windows 64 bit Dell. Old files (transferred from old computer) and New Documents created on new computer using Word fail to open immediately and require User Account action from winword.exe every time I try to open any document (several steps). Any way to resolve this short of buying Office 2010?
View 3 Replies
View Related
Jan 11, 2013
I have a Dell INspiron 1525 laptop with Windows 7 Ultimate 64 bit on it. My windows media player will not work. Cannot play CD's or burn them. How do I fix this?
View 4 Replies
View Related
