Aero Peek On Windows 7/64Bit Sometimes Not Working?
Aug 12, 2010
I have a peculiar problem with aero peek. It sometimes just decides not to work anymore, and only shows labels instead of a preview. This is only temporary, because when I switch between other windows, the aero peek is activated again. I actually reproduced this behavior by switching to this post, and writing for 1-2 minutes. Hovering now only produced labels/tooltips. By switching to another window, aero was "activated" again.
I just installed Windows 7 a week ago and today a very weird thing happens - Aero Peek doesn't work all the time. One thing I noticed is that when it does not work the taskbar icons seem like stuck in selected mode. What I mean is when you go over them they change their color - e.g. like they are selected. But when you go away they become transparent once again - well when Aero Peek stops working mine don't go to transparent.
I've attached an image. The bar on the left is how all bars should look like when they are not hoped over, yet as you can see the right bar has its "selected" color stuck. After I make a few "show desktop" switches, and then switch between windows - it somehow gets fixed. Totally random. I've tried closing programs, did the troubleshooter (said it's all OK), went into settings... basically everything I managed to find and thought of - I tried and nothing worked. All other functions of Aero work.
I have Win7 and FF15. Until recently Aero Peek worked fine but not any more. It doesn't work at all though it is enabled and I'm using an Aero desktop background.
If I am using a program and I move my mouse over to the taskbar and mouse over another program I have running the preview is displayed only briefly (on the order of milliseconds). If I click the taskbar first, then hover over an icon the preview is displayed correctly and if I mouse over the preview the window is brought to the front. However, if I click the preview the program is only sporadically brought to the front.I also noticed that Alt-Tab is not working correctly either. When I hit alt-tab the selection menu is again only flashed on screen even while holding Alt.Restarting computer doesn't fix it.Already ran the troubleshooter and no problems were found.Did a system restore to before the problems were there but that did not solve the issue either.Checked performance settings and everything is enabled.Like I said earlier I can't think of anything that was changed between the time when it was working and the time that it was not. I literally got up from my computer, sat down in another chair in my office, read a book for a couple hours, came back and it did not work.
I am puzzled as to why my aero peek display (is this the little mini pictures of the open windows?) has diappeared when I hover my mouse over the taskbar. All I have now is the title of the page, rather than a miniature of what's open. I did have to update display drivers a couple of days ago after having some nasty display problems that led to BSOD. Could that have caused it? When I go to Task Bar -Properties I can't check "Use Aero Peek to preview desktop"
I upgraded from Vista to Win 7 Pro, everything was working fine until a few days ago. The Aero Peek flashes for a second then goes away. Also the screen saver doesn't kick in or sleep or hibernate. I did a repair install and then a complete install also uninstalled the video card driver and and put it back on, but still nothing. I did notice when I have the device manager screen open that peek will work with everything that is open. The only thing that was changed to the laptop is that I hooked it up to a TV through the VGA. Also I deleted the old files from Vista that were stored in C:windowsold. Haven't touched the register.
Anything that I hoover over that should show a display of some sort (such as picture, that will show the date taken, and size) it will only show for a second then disappear.
Also did a sfcscannow which showed no problems.
System Manufacturer/Model Number Dell, Vostro 1000 OS Windows 7 Pro, 32-bit CPU Mobile AMD Sempron Processor 3600+, 2.0GHz Memory 2gigs Graphics Card ATI Radeon Xpress Series 128mb Sound Card High Definition Audio Device Screen Resolution 1280x800
I have installed Win7 Ult Ed into my latpop but I noticed that when for example i download a number of files, and hover my mouse over it to preview it, it actually does not show the progress of my download in real time, this only happens when i actually click on the thumb nail iteself where I can fully see it. I am running a 32 -bit machine with 4gb ram, why it does not show things in real time? The same thing happens when I play music in Windows Media Player.
First af all, hi all, i'm new to the forum. I found it out couse i'm using windows 7 right now (well, i haven't any particular file on my desktop so nothing to loose) and i'm searching a few things to improve my (till now really good) experience with this os.
Now the little problem: i'm searching for a keyboard shortcut to switch through windows with aero peek (x-ray vision) just like i do with flip3d, is that possible?
The only thing i found near to what i'm searching is the shortcut to switch through active elements that is like moving the mouse over icons of pinned-apps, that is not the same.
Aero peek has many useful features but, compared to my standard work, it takes me too long to move mouse on an icon, wait for preview to show, than move again mouse on previews of different windows of the same app.
i have a problem with my "aero peek show desktop" at the right side of the task bar. it is double size, i read in a few forums about this case with installing tablets. i installed my wacom tablet a few days ago,so i suppose its because of this.
So here is my issue: my aero peek thumbnails don't stay up, as I move my mouse over the active icon, it shows and then disappears. It flickers as my mouse moves across the icon. But when I click the explorer bar itself and then mouse over my active icon, it *will* show. I've tried to research it myself, updating my 9800gtx+ driver, running aero peek repair, and even windows Repair Install. It must be a registry thing, because I've done everything else.
7 x64 goes in/out of Sleep Mode successfully, but Aero Peek's visual effects disable approx. 2 sec. after the system wakes. If I log out/on the effects are still disabled; I have to reboot to establish.
Phenom 9850 x4 2.5 GHz GeForce 9600 GS
* I also have issue with right-clicking and Explorer crashing, however mine only occurs when I right-click on the Recycle Bin, and only after my computer has been running for awhile and I am recycling multiple files.
I only learnt about this a couple of weeks ago!If you want to make the Aero Peek button at the far right of your Taskbar into a plain and simple Show Desktop button:Simply right-click the Aero Peek button and un-check the "Peek at desktop" option. Et Voila!! That's it!
i booted up my comp and Aero wasnt enabled. I reinstalled my graphics drivers, it came back on. However, whenever I restart my comp, Aero disables again. so , if I reinstall my graphics drivers every time i boot there wouldn't be an issue, but thats a bit annoying. So I ran the windows diagnostic tool for aero and it told me that my desktop window manager was disabled. So I ran services.msc and found the desktop window manager in the list, only it said that hte desktop window manager was in face running and operational. [code]
[code] This was the error I received for many months when I attempted to play a game or watch a video through Media Player Classic.At the same time, I always got the error that Desktop Window Manager had stopped working and was closed upon start-up, so I had no access to Windows Aero et al. Basically, the errors went hand in hand with each other.Then after a while, the computer began freezing after 20 minutes of use. So now, even if I went and used Driver Sweeper to remove all old drivers for the GPU, and installed fresh drivers, the computer would freeze within 20 minutes of use. (Previously to that, a fresh install guaranteed no problems atleast for a week)I finally decided it had to be a GPU error, so I sent in the GPU for repair at ASUS. I still haven't received it back, but in the meanwhile, installed an old BFG 7800GTX I had lying around to have a temporary computer.Clearly it means it's not the GPU's fault. Is it the RAM? The Motherboard? Maybe not enough power to the system? [code]
I have an Acer Aspire One AOA150Bb running 7 Ultimate X86 and up until last week i think everything was running as normal but now when i drag my program windows it comes up with a black box outline as it does in the Basic theme why is this is there a quick fix to it or will i have to live with it or reinstall.
Windows 7 home premium 64 Geforce GTX 560 296.10 drivers
What caused the problem: Thursday I had my hard drives replaced, and had to reinstall windows. I have basically the same problem as the OP in Windows 7 Aero/glass color not working, was working before this thread
What I've done:- I ran the aero troubleshooter, came back with no issues.
The first thing I do after installing win 7 is apply the uxtheme patch. I've been running custom themes for a while, but yesterday decided to change the look of things. I applied a os x leopard type theme, it didn't work and now I've lost all desktop visual effects (transparency, themes, win+tab).I run the diagnostic and it detects that 'Windows Desktop Manager is disabled' - so I think "Ok, I'll just go into services and re-enable it"... but it's GONE! How the hell can a service just remove it self?So I run System Restore back to when I knew it was working, but still no damn transparency, that service or themes, just the default non-transparent Aero!
I have a recurring issue that drives me nuts to no end: Everytime I put my computer to sleep (I'm 99.5% sure this is the cause), Aero preview crashes, and prevents me from switching to an application with more than one window open (that is, using the taskbar). I have to kill and relaunch explorer to bring it back, but as I shut my laptop lid often, this is hardly ideal.
I am currently looking a way to enable Aero in my machine. (as note, currently I am missing the Aero Glass, Aero Peek, and Aero Flip.
I did a clean install of Windows 7 on the machine. Because my screen is WideScreen, at first the graphics are all large and mushy. But at this point I HAVE AERO!
Then, I installed the driver for the gfx card, which was SIS UniVGA3 v.3.85. After installing and restarting, I get the normal resolution (1280x800) but NO AERO.
I thought this was driver problem, so I downloaded UniVGA5 v5.07, UniVGA5 v5.20 (which is the driver for Windows7, according to the site), and the SiS driver update from Windows Update, all of which didn't enable Aero for me.
I am completely stumped on this. I just don't get why the heck I get Aero WITHOUT driver, but no Aero with drivers.
I have tried to get the ms fax on my 64bit computer to work but get an error message saying" an unexpected error has occurred" what do I do? The modem is a c net 56k v92 modem and the device manager says its working properly.I did initially try to install an old Duxburry Modem but it did not have the correcr drivers so took the card out and put the new cnet internal modem in.I do notice e that there is no audible dialing to be heard when I say send the fax. My old machine had a very distinct audio of the dialing out.
I purchased a new Asus laptop a few weeks ago with Windows 7 Home Premium installed. The laptop has Conexant Cocoa II High Definition SmartAudio speakers. The problem I'm having is in regards to the sound I am getting from both my laptop speakers and my external speakers which plug into the headphone port not having any bass. When I have my external speakers plugged into my old laptop running Windows XP the sound is fine and all speakers and subwoofer work, so I know it is all wired properly. When I unplug from my old laptop and plug it into my new one with Windows 7, there is no bass being played. The subwoofer doesn't work and the bass that usually comes from the speakers is not present, and turning up the subwoofer doesn't do anything. I've tried to use the "Bass Management" enhancement feature in the speaker properties, but it has no effect. The only thing I've been able to find that will lead to the sound having bass, is when I enter the set-up for the "Room Correction" feature in the enhancement tab for the speaker properties. During the set-up, the sound has bass, but as soon as the set-up finishes the sound returns to having no bass. The odd part is when sound is playing out of just the laptop speakers, the "Room Correction" set-up menu causes bass to be played out of them too. So I know my laptop has the potential to play bass, it just seems like something is stopping it. I cannot find any equalizer feature. My laptop didn't have Realtek when I got it, but I've downloaded the latest version and installed it (I think) but it hasn't changed anything.
how do I solve this problem?every time i run MOHPA, this message always pop up."A Problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available"
On windows 7 64 bit the start button(orb) does not load Right click does? I have scanned for viruses and restarted in last good configuration When I reboot I get one go at the start button and it works but never again I use a Toshiba Qosmio laptop.
I have a PC with a Gigabyte mother board and an i3 processor with 8gig ram and 2 tb hard drive. When I got the computer, it was running Windows 7 Ultimate 32 bit. Once I checked the computer, and found it was 64 bit compatible, I installed the 64 bit version. I did this as a new install. I have had nothing but problems since. I have an intelli mouse which clicks away when I try to go back or forward on a web page. If I try to check a box, it checks and then automaticaly unchecks. I have to keep clicking on it until the check stays. Some web pages won't even work, ie Bank of America Website. I can go to anything I want to except My Portfolio. It causes IE9 to shut down. When I try to open programs, it opens multiple times. I have formatted and re-installed again, but still have the same problems.
I have windows 7 on a acer notebook and able to use my HP 5610xi w/no problem. I recently bought an acer desktop emachine el1352g and cannot use my hp or some other software. It says that product cannot be installed with operating system. The only difference i can see is that the emachine desktop is a 64bit processor. I tried to go through hp (download driver) website but got no where.
