Installing Printer And Scanner In XP Mode?
Jun 28, 2010
I have an Epson multi function printer which I am trying to install in XP mode. The reason I am doing this is because the scanner wont work in Windows x64 bit, so I have tried to install it in XP mode. I went to the Epson website and got the x32 bit drivers and downloaded both the printer and scanner driver. The thing is though when I try to install them I get a message saying that I need to install the printer driver manually but I don't know what port it should go in.
View 2 Replies
ADVERTISEMENT
Apr 26, 2011
I have installed the 32 bit driver for my Minolta 1300W. I can print happily in XP mode but I don't seem to be able to be able to use the printer in the Windows 7 host (64 bit Pro). Should I be able to see it as a printer if I attempt to print a document in Office? Launching the application doesn't help.
View 2 Replies
View Related
Sep 5, 2011
I have a 64 bit Win7 OS and I need drivers for a Lexmark 3200 printer and a Mag Innovision DTS 3060 scanner.Neither the printer nor scanner are usb. The latest drivers for them seem to be for either XP or Vista, depending on which web site your'e on.
View 1 Replies
View Related
Feb 19, 2011
i have windows 7 and a dell 1600n multifunctional printer - i can print just fine but i cant scan things up - the printer is connected etc as i can print so no probs there but when i go to scan and use the dell software/ms paint it doesn't recognise the scanner - the scanner subfolder is in the driver folder on the printer installation?
View 3 Replies
View Related
Nov 26, 2009
Windows 7 Pro 64bit
Intel DP55WB
i5-750
4GB DDR3
Have installed XP mode, & V PC.
Have installed Epson Perfection 1250 Scanner in XP mode.
I am unable to access the scanner dfrom windows 7.
I have to restart XP mode, USB/Attach scanner. Then i can use the shortcut to the scanner from Win 7, but i then get error message;
Windows XP Mode - Windows Virtual PC
To open a virtual application, the virtual machine must be closed
Click Continue to open the virtual application. This will close the virtual machine and you will lose any unsaved data.
To avoid losing data, click Cancel and save any unsaved data. Then, log off from the virtual machine and try again.
[V] See details [Continue] [Cancel]
Once it has closed i can then use the Scanner. Which is fine for that session. Once i restart win 7, i have to go through the same again to be able to use the scanner.
Is this right.
I note that whenever i close XP mode, and then reopen i have to do a USB/Attach for the Scanner.
There are no 64bit win 7 drivers for the Scanner, hence XP mode.
View 3 Replies
View Related
Jun 15, 2010
some of the important Mustek 600 II EP Plus flatbed Scanner installing?
View 9 Replies
View Related
Nov 10, 2009
I upgraded my system from XP pro to Win7 64 Pro. My scanner is still resisting to is installation. Did not succeed yet
I downloaded the Win7 driver from Canon site, but drivers is not installing. No message, no result, nothing.
View 9 Replies
View Related
Jul 9, 2011
I shall shortly be taking delivery of a new desktop which runs with Windows 7 Home Premium 64bit.I have a Canon 4400F Scanner and a Canon iP4300 Printer. Will these work OK with Windows 7?
View 3 Replies
View Related
Mar 27, 2009
The XP driver for this was pretty good for a typical cumbersome driver from HP. The Vista/Windows 7 driver works minimally and the control panels look great but:
1. Normal vs. Fastdraft print selection results in terrible low density quality.
2. Can't change the default printer selection.
View 1 Replies
View Related
Jul 18, 2011
How to install vivid 3XE Scanner with window 7?
View 1 Replies
View Related
May 9, 2011
looking for driver for scanner printer type hp6213
View 1 Replies
View Related
Oct 30, 2011
I have a HP Laserjet 3050 PCL 5. The scanner software worked great with XP but won't install with Windows 7. Has anyone found an alternate software? The printer is an all in one and it doesn't make sense to have to replace it because of the software. HP has been no help.
View 4 Replies
View Related
Jan 28, 2012
I have a canon MP620 printer which works fine. The scanner has just stopped working and I get a message that the scanner driver is not installed even though it is installed.
View 5 Replies
View Related
Jan 27, 2012
In the 20 years I have used Backup programs like Acronis True Image which don't give free support. I have never seen a company give free support with their backup programs. Support is worth half of the product. So is there or does anyone know of a backup and restore program that gives free support like a printer, scanner, router, hard drives which gives you years of support and no change?
View 1 Replies
View Related
Dec 3, 2010
I am trying to figure out if its possible to print from applications instaled in Win 7 Using an XP compatible pdf printer software (Print2Pdf) installed in XP mode. The problemis because its installed on the XP virtual machine the printer does not appear in the Win 7 printers list. I do not wish to install the programmes I wish to print from in XP mode as well just to use this pdf printer.
View 9 Replies
View Related
Nov 14, 2011
Windows 7 refused to install an old program that was probably intended for Win98, so I am downloading XP Mode, but Im not sure if I can install something from a CD onto a virtual PC, this is the first time I do this.
View 1 Replies
View Related
Jun 15, 2011
I have a new Tosh laptop with Windows 7 Professional and want to get XP Mode installed and running. I have checked that the processor etc is OK with XP Mode so everything should be fine. However after I have downloaded the upgrade file from the Microsoft web site and run it there is no sign of XP MOde other than in Control Panel it is listed as a program and there is also a folder in program files called Windows XP Mode.
What do I need to do to get the XP Mode up and running?
View 5 Replies
View Related
Jan 19, 2013
It seems after hours of searching, I've learned that there's a problem with using XP Mode with AMD Bulldozer-based CPUs, like my FX-4170 (lucky me.) Microsoft has a hotfix, url...but after running it "successfully," XP Mode still will not install properly--I get an error message right at the end of the install process. I also ran Microsoft's virtualization checker, and my machine checks out as compatible.
View 1 Replies
View Related
Sep 30, 2009
My printer is attached via USB. I can get my printer installed in both Windows 7 and XP mode. In XP mode it shows as shared in USB devices. However, it is online in Windows 7 and can be used, but offline in XP mode. If I click Attach it will work in XP mode, but then shows as offline in Windows 7 and can't be used. Integration features the Printers box is check, as well as enable at startup.
Is it possible to use the printer on both machines without havind to attach and unattach it?
View 2 Replies
View Related
Aug 20, 2011
I'm running Windows 7 Professional 64 bit in bootcamp on a MacBook Pro 13". I installed XP mode but the version that installed was XP 64 bit. I would like to install XP mode 32 bit so I can run Splinter Cell and a few other older games. Is there a way to load XP mode 32 bit under Windows 7 64 bit Pro?
View 1 Replies
View Related
Jun 3, 2010
Ok so I think one of my buddies messed up my windows vista cuz it will not boot windows anymore it goes to launch repair windows or launch windows normally. I tried launching repair but nothing happens same with launch windows normally. So I got a windows 7 install cd and I pressed f8 and windows loads files then I see the windows 7 logo saying starting windows but after that it goes to a black screen with the mouse on the screen. And it stays on that screen. I don't have the cd that came with my laptop, is there anything I can do to get windows running again?
View 9 Replies
View Related
Sep 8, 2011
I have completed the installation of xp mode on my windows 7 64-bit professional computer with the exception of the antivirus. I'm using a multi-user Trend Titanium Maximum Security 64-bit version on windows 7 and have tried to install the second copy from the xp mode as per the instructions that I am following. Due to the xp mode being a 32-bit system I tried loading the 32-bit Trend version but the install failed with a "incompatiable version of internet explorer" error message. Therefore due I load from the xp mode or thru the virual machine and/or install the 64-bit version for xp mode. I do have Internet Explorer access when in the xp mode.
View 9 Replies
View Related
Dec 26, 2009
I have an NEC Superscript 870 that does not have Windows 7 drivers. Is it at all possible to run a printer in WXP compatibility mode as we can run programs in WXP compatibility mode??? Sure would not only save a few (very dear) dollars, but also prevent idiotic waste of a perfectly good asset (where is all of their "think green" money where their mouths are???). I am intentionally not upgrading one computer to Windows 7 just so I can copy docs over to the WXP computer and bring them up on it so I can print them.
View 6 Replies
View Related
Mar 4, 2010
Does anybody know where I can set the printer redirection in Windows 7 Virtual PC? I cannot find it and the Virtual XP Mode does not have the printers that are installed local on Windows 7.
I see everywhere on the internet that one of the features is printer redirection, but I can't find where to set it.
View 3 Replies
View Related
Jun 12, 2010
I tried to install with my graphics card ATI ASUS EAH4350, but I couldn't install win 7. It stopped when "starting for first use" message. But I found solution to install Windows 7 in vga mode and it worked. Then again I put my graphics card and started win 7. It automatically installed vga driver and asked me to restart before I install ati catalyst driver from cd. After restarting when black screen comes before "win 7 welcome screen" it freezes with mouse pointer. It only starts in vga mode or safe mode. By the way I have win xp as well in c drive nad installed win 7 in h drive.
View 3 Replies
View Related
Jan 24, 2011
First thing, my build:
Board: Gigabyte GA-P55A-UD4
CPU: Core i7 870 @ 2,93 Ghz
Graphic: Sapphire AMD Radeon 8670 Mushkin 2x2Gb Red Culvert Kit @ 1600Mhz CAS 6-7-7-18
Seagate 320 GB SATA II HDD + WD Caviar Black 1TB SATA III HDD
Running: Windows 7 Ultimate
Trying to install: Windows 7 Ultimate
PSU: LC Power Arkangel 850W
I have Windows 7 Ultimate installed on my 320 Gb HDD and everything is running ok. I just bought a WD Caviar Black 1TB SATA III disk and I want to install Windows 7 there, since the disk is faster. Here's what happens. When I connect the disk (it is connected GSATA 3 connectors), the disk will be recognized in bios and in Windows, but wont show under My Computer. I figured it must be some software bug so I formatted the disk in diskpart (clean format) and installed Windows 7 on it. At that time the GSATA 3 interface was set to IDE mode. It ran fine but after installing a big batch of Windows updates, the system hung at windows startup screen. After restoring the system to a previous state (i.e. before the updates), the system booted up normally.
I didn't know what was wrong so I formatted again, and this time I set the GSATA 3 to AHCI mode, since I realized this is a better option. When installing in AHCI mode, the computer expands the windows files but when the system is restarted, I get a BSOD (code Stop 0x000000B4 video driver failed to initialize) at Setup is updating registry settings. I really want to use the AHCI mode, but I cant get the system to work in IDE either so its really a bugger. I have no idea what could be causing this as the system works fine when using the other disk. Can the BSOD be caused by the HDD? Anyway, I really want to start using the disk. I have tried installing Windows 7 from a dvd as well as from a USB key.
View 5 Replies
View Related
Jan 24, 2011
First thing, my build: Board: Gigabyte GA-P55A-UD4 CPU: Core i7 870 @ 2,93 Ghz Graphic: Sapphire AMD Radeon 8670 Mushkin 2x2Gb Red Culvert Kit @ 1600Mhz CAS 6-7-7-18 Seagate 320 GB SATA II HDD + WD Caviar Black 1TB SATA III HDD Running: Windows 7 Ultimate Trying to install: Windows 7 Ultimat PSU: LC Power Arkangel 850W
Ok so here's the deal. I have Windows 7 Ultimate installed on my 320 Gb HDD and everything is running ok. I just bought a WD Caviar Black 1TB SATA III disk and I want to install Windows 7 there, since the disk is faster. Here's what happens. When I connect the disk (it is connected GSATA 3 connectors), the disk will be recognized in bios and in Windows, but wont show under My Computer. I figured it must be some software bug so I formatted the disk in diskpart (clean format) and installed Windows 7 on it. At that time the GSATA 3 interface was set to IDE mode. It ran fine but after installing a big batch of Windows updates, the system hung at windows startup screen. After restoring the system to a previous state (i.e. before the updates), the system booted up normally. I didnt know what was wrong so I formatted again, and this time I set the GSATA 3 to AHCI mode, since I realized this is a better option. When installing in AHCI mode, the computer expands the windows files but when the system is restarted, I get a BSOD (code Stop 0x000000B4 video driver failed to initialize) at Setup is updating registry settings. I really want to use the AHCI mode, but I cant get the system to work in IDE either so its really a bugger. I have no idea what could be causing this as the system works fine when using the other disk. Can the BSOD be caused by the disk? Note: I have tried installing Windows 7 from a dvd as well as from a USB key.
View 7 Replies
View Related
Dec 2, 2009
I cannot find out why my Windows 7 install only has two options: "Start Recovery Console/Mode?" and "Start Windows Normally"... Where is safe mode.
View 9 Replies
View Related
Jun 12, 2010
first i tried to install with my graphics card ATI ASUS EAH4350,but i couldnt install win 7. it stopped when "starting for first use" message. but i found solution to install Windows 7 in vga mode and it worked.
then again i put my graphics card and started win 7. it automatically installed vga driver and asked me to restart before i install ati catalyst driver from cd.after restarting when black screen comes before "win 7 welcome screen" it freezes with mouse pointer.
i have been searching many forums,but found no solution. it only starts in vga mode or safe mode. by the way i have win xp as well in c drive nad installed win 7 in h drive.
View 7 Replies
View Related
Jul 22, 2012
I also have big problem with my notebook. After installing windows 7 x64, my notebook cant do hibernate...
View 2 Replies
View Related
Jun 7, 2012
just bought compaq presario, win7, 64 bit laptop. trying to install hp officejet 4500 G510a printer driver. when type in www.hp.com, it takes me to www8.hp.com and a black and white HP screen. Am running Kaspersky Internet Security 2012. Takes forever to download. Save it to my docs folder. When it's done, I unzip it and run it. Steps me through the process, asks to plug printer in and then wait until it finds it.
View 1 Replies
View Related
