I have Windows 7 on 250 gb hardisk and do not work anymore,may be problem with MBR error. I want to install new instalation (not clean install) because i want to restore my old software back).How can I do that ?
View 2 Replies
it seems to me that Windows 7 search only works for arguments which occur in the front part of a long filename (less than 100 char's total without path).
Whenever I look for a string in the SAME filename that occurs at the end of the filename, Windows 7 search desn't seem to find anything.
I have an OLD computer with a 2.4 GHz processor and 1 GB ram, running XP 32 bit. I wanted to upgrade to Windows 7, So I tried to install 32 bit windows 7, knowing my computer couldn't handle 64 bit. However, at the end, it simply told me "Installation Failed" and reverted to XP, with all my files. I tried multiple times, then I tried installing 64 bit windows 7, and surprisingly, it worked. However, it is laggy beyond belief, so I tried installing 32 bit again. Again the installation failed. Now I'm thinking of reverting BACK to XP.
View 1 Replies View RelatedNew gaming PC project:
Asus Rampage Extreme IV
I7 3960x
32gb Gskill 2133 mhz
Sound Blaster Recon 3D
2 Corsair Force GT 60gb sata3
2 Corsair Force GT 120gb sata3
Windows 7 home 64bit w/anytime upgrade to Professional (Didn't know about the 16gb ram cap...)
9800 GTX video (ran outta money...)
The issue I'm having is everything seems fine till the first reboot, then I get errors about some random important file is missing or corrupt, please insert your DVD and repair windows or whatever the hell it says. The specified missing file is always different each install attempt (I have made about 30ish attemps so far in every drive configuration I could think of). Once it even said 'a system file' is missing or corrupt with no file specified. One attempt (120gb drives in raid0 with no other drives attached) did make it to the Windows 7 load screen, but then windows encountered an 'unknown error' and had to close while finalizing.
What I wanted to do was raid0 the 60's for boot and raid0 the 120's for games, but I can't do that because while this mb has 4 sata3 ports, only 2 ports are raid capable (Intel C600 controller) as the other 2 are on an ASMedia controller. As that is the least of my problems and only my fault for making assumptions before I buy crap, what I thought to do instead was install win on one 60 on the ASMedia sata3 controller in AHCI with OPROM enabled, use the other 60 for task file, and raid0 the 120's for game installs. At first I thought the problem was bad drives because it installs fine on my old HDDs, but all 4 drives DOA seems unlikely so I figure I'm doing something wrong.
There are multiple posts about issues with these drives on Corsair forums, however none of their solutions provide a fix. Currently I have Windows 7 installed on 2 seagate 160gb HDD's in raid0 on sata2 with both 60's on sata3 ASMedia and both 120's in raid0 on sata3 Intel C600 controller. I am convinced there is no problem with any drive as I have multiple games installed on the raid0 with task file on 1 60 and the other 60 is dedicated to ready boost. Honestly I have no idea what ready boost does, and with 32gb of ram it probably doesnt do much - but I can't think of anything else to do with the drive to see if I get any system hangs or issues.
After a week in this configuration I have had no issues whatsoever. I have run error checking from the properties tab in win for all drives, as well as chkdsk from command prompt and the disk checking utility in partedmagic which all came back no problems found. ATTO benchmark shows the the 60's around 475mb/s read/write and the 120's in raid0 are about 1100mb/s read/write. These SSD's are lightning fast. My HDD's are not - 275mb/s read/write in raid0 . Must needs faster boot.
I have tried installing win on each drive individually on each controller twice (16 attempts) and tried each set in raid0 a few times. Every attempt started out with a partition deletion and a secure erase using partedmagic AND sata3 controller in AHCI mode per Corsair forums. I have done Corsair's 1.3.3 firmware update to each drive. I have tried letting windows partition/format each drive during the install. I tried booting from my HDD's, then creating partition tables, allocating sapce, and formatting the SSD's from disk management, then installing win on the drives already setup. And a few other various things in different orders.
My steps for the 1 result that yeilded and actual Windows 7 loading screen after 1st reboot:
- 2 120gb ssd's on Intel C600 sata3
- Enter bios - change sata from raid to ahci - exit
-Boot with partedmagic bootdisk - deleted partitions both drives - system suspend for drive reset - secure erase both drives - shutdown
- Plugged in 2 160gb hdd to sata2
- Enter bios - change sata from ahci to raid - exit
- Enter raid setup utility - create raid0 on 120gb ssd's with 32kb strip - exit
- Boot win from hdd - create MBR partition table, allocate all avail space, format NTFS (not quick format) - shutdown
- Unplugged 2 160gb hdd
- Boot from Windows 7 install disk - install to SSD raid volume - 1st reboot yeilds load screen then 'unknown error', but I guess it was some-what better than windows failed to start due to whatever random file missing or corrupt.
Installing software that works with xp but won't install in windows7
View 2 Replies View Relatedi bought a new setup, moved all old stuff to another empty computer case or what.the only i didnt moved to the old case was the PSU and some harddrives. first time i started the computer with the SSD (with functional OS of win7x64)everything works fine.. but it crashed some random times inside the windows, i thought it was because of the drivers, i got that fixed by removing one graficcardSo i thought it was better to whip all the data from SSD and make a clean installation, stability installation.i wipe the SSD drive from my old OS and installed a new one, in one step of the win7x64 installation, it crash and wont boot upstrange, i had not been at the bios with my fingers, after trying with some solution in 6h i change the ODC-> marvellSata6G controller to AHCI mode, main -> storage configuration to ACHI, in bios. Wont work.. I tried to change them to IDE, wont work either. I removed the two others ram sticks, it wont work either..uhm,the total time i been working of this in three days to get a clean Windows 7 to boot at this motherboardat last.. i luckly installed the OS to the SSD at my new setup and then move it to the old setup. That works.. first time, then the computer wont boot windows again.
View 3 Replies View RelatedJust did a clean install of Windows 7 Pro on an HP dc7700, got the drivers fixed then did and update of windows. After doing the updates, Internet Explorer 8 no longer works. Can still connect to our server, but no outside connectivity.
View 7 Replies View RelatedEach day, the first time I opening 'any' existing Microsoft Works Word Processor file that I have, such as ones I have for phone numbers, addresses, etc., I have to wait about 45 seconds for the file to open. And while I'm waiting, I can't do anything else on the computer. Any of those files I open the rest of the day, open immediately. It's just the first time each day.
View 1 Replies View RelatedI have docs on XP running MS Works 4 and I need to open them on new computer running Windows 7 with MS 2010 and Open Office. I have the following:Tried to install "Works 6-9 Converter".
View 1 Replies View RelatedI NEED to open docs created on older computer running XP and MS WORKS 4. I have transferred all data to new computer running Windows 7, MS Word 2010 and Open OfficeI'm unable to access most Works docs in either program.I've tried the following:1. Downloaded the "Works 6-9 Converter" and got nowhere.2. Installed MS Works 4 but it will not open as a program.
View 1 Replies View RelatedFriend has some old documents from the days of Windows 3.1. They are written in Microsoft Works 3.0 (or was it 4.0).
The problem is all the solution I found to open those documents in Word are for Word 2000, which I don't have.
Is there a way to open them in Word 2007 or Word 2010?
I have an old DOS cookbook program which contains all my old recipes from many years. I have it installed on my Windows 7 32-bit system and would like to put it on my laptop for use on the road. Laptop is Windows 7 64-bit and I get a message that it is not compatible. Is there a workaround so I can use that program on the 64-bit system? I tried choosing the compatibility to work with Windows XP 3 but still get that incompatible message.
View 9 Replies View Relatedwhen I put my xp disk in cp it finds it right off but win 8 spins for a minute or so and stop stoshiba a25- s205
View 2 Replies View RelatedWindows 7 Ultimate, 32 bit. Not on a domain. After I installed SP1, "Switch User" disappeared as an option. "Hide entry points for Fast User Switching" in GP Editor is set to Not Configured.
I also checked the Application Information service as Andre suggested, and it was not running. I started it, set it to automatic startup, and rebooted. Still no joy.
I have uninstalled SP1, and I now have the option to switch users as I did before installing SP1.
I'd prefer to keep my system updated, but for this system anyway, the ability to switch users as opposed to logging off is more important.
Finding it impossible to install Security Update for Microsoft Works 9 (KB2680317) from WIndows Update
Details Download size: 2.1 MB
You may need to restart your computer for this update to take effect.
Update type: Important
A security vulnerability exists in Microsoft Works 9 that could allow arbitrary code to run when a maliciously modified file is opened. This update resolves that vulnerability. I get error code 646. All other updates are installing successfully - have also run the Windows Update "fixit" which is the only available way from MS but makes no difference. I don't routinely open any files unless I am sure of their provenance so I'm not overly concerned - it's just annoying to have constant update failures on this one. Not even sure I have Works 9 ...although obviously it thinks I do ....
I've got:
HP notebook a Pavillion dv9000 9930us
4 gig DDR2 SDRAM
Nvidia Geforce 8600M GS
320 gig HD
Was: Windows Vista Home Premium x64
Now: Windows 7 Ultimate x64
and windows 7 does not love me. Every time I install things look to be going smoothly, then on the first boot (and from then on) every time I try to access any admin privileges I get the BSOD usually from IRQ, or page memory or a number of messages and the computer immediately reboots. This isn't a problem when I'm in safe mode, but when I'm there it shows that all the hardware is installed and working. Even then safe mode only gives me about 2 hours before it BSODs again.
Does this laptop just hate windows 7 or is there something I can do about this?
I torrented a windows 7 install disc iso. I burned it to a disc but when i tried to install windows 7 it gets to "expanding files" and freezes at 0% . After that i tried using the exact same iso but from a thumb drive, and it worked. I tried the disc on multiple computers and it always sticks at 0% on expanding files. I have also reburned the iso multiple times and it still doesn't work. If i use a jump drive it always works. I know someone is gonna say that its the iso because i got it from a torrent, but the same iso works from a usb drive so it cant be that. I know someone is gonna say it is the optical drive, but i have tried it on 3 different computers with optical drives that i know work but it still sticks at 0% so its not that. Its also is not that i haven't waited long enough because i have left it for multiple hours and it still didn't move from 0%. I suspect that its an little feature in the burning program that i overlooked during the burn process.
View 2 Replies View Relatedtell me if a re-install from a system image file on my notebook is as good as a clean install from say a retail disk.I can not format all my drive and start a fresh. Can my System image file become glitchy or infected with a virus.?
View 5 Replies View RelatedI am going to reinstall Win 7 Ultimate from a USB. I have been following your guide but i wanted to ask - I have downloaded my ISO file from Heidos. Its showing as an archive. I think this is normal? To be sure I DON'T need to extract this do I? It will be automatically done by the USB creation and /or install process ?
View 4 Replies View RelatedSystem Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 4
RAM: 16294 Mb
Graphics Card: EVGA 550 ti sc
Hard Drives: C: Total - 114470 MB, Free - 60367 MB; D: Total - 240028 MB, Free - 229143 MB; E: Total - 236906 MB, Free - 199477 MB; F: Total - 114470 MB, Free - 100953 MB;
Motherboard: BIOSTAR Group, TZ68K+
Antivirus: Microsoft Security Essentials, Updated and Enabled
New computer above and my previous computer have Windows Updates for the same file with no KB number. Both computers have tried to install the update numerous times but fail. It says the file is Windows Internet Explorer 9. I get an error code 9C48 for which I find little info The new machine was put together April 11 and shows IE9 being installed on that date and I am already running IE 9.
I just built my first computer, and it has an SSD and an HDD. I installed a fresh copy of Windows 7 on the brand new SSD, and on the C Drive I'm seeing a windows.old file that is 11.5GB, and there is a windows file that is 12.3GB. I don't get this at all. Like I said, it is my first computer.....everything seemed to go well with the build, and sp far things are working, but I know this isn't right. This was a brand new drive, like I said, I do remember when it was going through the different parts of the install, and restarting several times, that it seemed like it was staarting at the beginning again.....as If when it had finished, I didn't take the DVD out, and was basically starting the install "again"....if that makes sense, I stopped it, and pulled the DVD and it booted up, and seems o.k.
View 3 Replies View Related1. Same computer in my signature/specs except for the optical drive.
2. Hardware passes Windows 7 compatibility test.
3. The install DVD can be read properly. Creating an ISO image of it works perfectly. No read errors on the disk itself.
4. The optical drive is practically brand new, the cable is brand new, never had any I/O errors using this drive.
5. RAM passes MS memory testing 6 times. 0 errors.
6. Windows 7 Ultimate install fails at the same point, during file unpacking, 3 times. Says files are missing or corrupt.
The install disk was created at home from an ISO download, student licensed Windows 7 Ultimate, 32 bit but I don't think that really matters. See #3.Is there anything else left to look at? Any ideas why this won't work?
is there anyway i can do this? also i dont know how to do it from the bios i also want to make sure there are no traces of vista and all data is gone.
additional informartion:
toshiba satellite a500
4gb ram
500gb hd
I have recently built my own computer. The only thing i was missing was an OS. I downloaded Windows 7 home premium 64 bit(from microsoft's partner Digital River). I took the ISO file onto my USB stick and tried to plug it in to my new computer. It did not work, which was logical. Then i used "Windows 7 USB/DVD download tool" from Microsoft, to make the usb bootable and the ISO. when it was done, i tried to plug the USB stick into my new computer, sadly it did not work. Then i tried to install the OS on a virtual machine "Oracle virtual box". I mounted the ISO file to the DVD drive on my laptop. Then i opened up virtual box to install the OS. It worked! I do not know why i does not work when i try to install it from the usb stick on my new computer.
View 7 Replies View RelatedI do the Windows 7 Clean install and now I cant delete or add folder or file in to some folder or drivers they ask administrator permission. How can I change that and there is unknown security members also !!!!
View 3 Replies View RelatedCompaq Presario SR5010NX
Celeron D processor 360
Vista Home Basic
512 MB RAM
120 GB HDD
Intel graphics media accelerator
DVD/CD w/Lightscribe
This system is so sluggish it either has multiple infections or is just overloaded given its puny 512 MB of RAM, so I can't really use the system specs utility at the moment.Since I'm working on a similar clean install for an ACER notebook which is Win7HP 32-bit, what are the chances that the .iso file I'm burning to DVD can also be used for this much older technology. I have no problem upgrading the RAM to its max, unless it's already at its max?
My company computer (hooked up to our internal network; no homegroup) has just had a fresh install of Windows 7 Pro 64-bit. I went through the process of mapping network drives and had a problem when it came to connecting to IP addresses and folders in the format of '\servershared folder'. Turned out that I had to change a security setting.
Following the instructions on this site, I was able to resolve that issue. These network locations are CNC machines and the files that I am placing on the machines contain CNC code (G&M code and X, Y, Z values for 3D machining). Basically, G&M code cannot have multiple X, Y or Z values on the same line (it wouldn't make sense to go to two X locations in the same move).
When I transfer CNC files from a network location (all of our files are stored on a server) to the CNC machine, they occasionally get corrupted where part of one file is contained in another file. I have tried transferring one at a time and in bulk, both with the same result.
Just got all the parts yesterday, put i all together today, all is running fine.Just in case i'll post the components:
Gigabyte 990fx-ud3
Amd fx-8120
Gigabyte hd8950 OC
HyperX 2x4GB 1600Mhz
So i bought Windows 7 Home Premium from the same store i got this at (Webhallen, pretty much swedens largest component retailer) to replace the standard Home edition (which i got with my "old" packard bell!).
I have 2 HDDs, one from the packard bell (1tb) and one i recieved from a friend, a 320gb seagate. I ran with both in my packard bell for a while, using the 320gb for the system. It ran without any problems.So, i boot the CD, go through the setup and format the 320GB. (I also formatted some reserved space for OEM files from the Packard bell harddrive since i won't be using the packard bell any time soon).I proceed with the installation.The copying of the files goes very quick and when it reaches the expanding of files it takes ages before it finally comes to the error:Windows cannot install required files. The file may be corrupt or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0x80070017.Immedieatly i whipped up the laptop and googled it, trying the different "sollutions" to no avail, like simply trying to install again without rebooting, taking out a RAM stick and only running with one in the master slot, taking out all excess Harddrives etc etc. i also ran Memtest86, clean, no errors!
I tried install Ubuntu on it, but that didn't go well either. It loaded for ages and then i got a very strange horizontal black and white striped screen, the black stripes being jagged and pixelated.I found my old windows 7 home cd from my packard bell and tried installing with that one. Same result, Error code: 0x80070017.
Old post, look for more info. Okay, boopme directed me to here, how do I preform a system file check without a windows 7 install disc handy? I have oem, so is all the win7 computers on my property, am I sunk?
View 14 Replies View Relatedwhen i try to install windows 7 on i3 desktop ,after loading file it show white lines..but windows vista install sucessufully
View 29 Replies View RelatedI just installed Windows 7 Ultimate on my Dell Optiplex 755. It originally had Windows Vista Business. 64 bit OS. After Win 7 Ultimate installed I immediately want to access files or folders and I'm hit with a Explorer.EXE
Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item.So after doing some research I re-installed a second time this time formatting the drive first. Then installing Windows 7 Ultimate. As soon as I get to the desktop I received the same error as mentioned.
