I have a corrupted computer.The first issue is there are 2 hard drives. The second is every time I get on this computer there is a shadow to anything I complete. I attempted to load a program to download files from my camera to this computer. The error: An error occurred during the installation of assembly 'microsoft.msxml2, public key token="6bd6b9abf345378f",version=4.20.9818.0", type="win32", processor Architecture="x86".
I installed windows 7 on my computer that has two hard drives and I tried to remove the secondary drive ( it was used as storage) when I removed the second drive I was then unable to restart my computer. I tried to repair start up from the install disk (3 times) it did not work. when I plug the second drive I am able to start up again. I would like to remove the storage drive and replace with a larger. I bought a wireless seagate 2tb free agent goflex hard drive and wanted to put the 2 tb hard drive into the computer and take my 1 tb drive from the computer and use it in the wireless system.
I'm a photographer with 3 old-tower-based PCs that I look after myself, all with Win7 and SATA2 disks. Naturally, I need ever-larger storage space. To that end I moved all the data from a 1Tb disk to a 2Tb disk, then removed the 1Tb disk intending to replace it with a 3Tb disk. However, without the 1Tb disk, this PC would not boot, and the repair disk couldn't locate any Windows OS. But the OS is on another disk entirely (that remained connected throughout all this). I re-connected the 1Tb disk and the PC booted just fine. On inspection I find that this 1Tb disk - that I thought was entirely empty - has on it a 100MB System Reserved Partition that might relate to the MS back-up system that I've never used (as Win7 seems to point to this, although telling me it's not big enough to use for a backup!) By assigning a letter to this 100MB partition, I can see that there's a handful of (normally hidden) files and a directory relating to booting the PC. I therefore conclude that the PC is booting from this partition on the 1Tb disk, even though the OS is on a separate disk. How do I get the PC to boot from the 'OS' disk so that I can exchange the offending 1Tb drive with a 3Tb one? Or is there some other solution? Maybe I just copy this partition to the new disk? (BTW, I've already registered the 3Tb disk on the system.
I have a new PC running W7 64bit.When I click the safely remove hardware button to remove a USB flashdrive, listed as well is the option to remove my hard drive. Is this normal? The shop that built the PC for me says it is because my hard drive is SATA, but it is still a bit disconcerting.
I was wondering... If I move my video, music, my documents folders etc. from my boot drive (ie C drive) to say a storage drive (D Drive), is the data completely removed from the boot drive or is it still there waiting to be erased next time a new file is written to it?
I have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
So, I have a i7 2600K system with a solid state disk as the boot drive, and an older (c2008) Samsung Spinpoint F3 500GB drive as the data drive for programs (that I deem as not worthy of the quick load times). The hard drive has given me some errors over time, and I bought a hard disk to replace it (a Hitachi 1TB). The issue I'm having is that the fact that Windows 7 puts a small (100MB) partition on the F3, and for some reason, even though I'm running Acronis 2012, it doesn't seem to be able to clone the F3 over to the Hitachi. I've also tried Drive XML, and for my 2 hour wait, I only managed to acquire a boot error. Thankfully, I've not done anything rash to destroy the data on the F3, but given the fact that I've seen corrupted files in Steam from that drive, I'm not will to trust it long term with my data. I really need to get the data onto that Hitachi, though... Anyone have any advice for upgrading the HDD in a SSD/HDD system? I don't really feel like it should be so hard, especially if I've bought Acronis True Image, but maybe they haven't designed their product to handle this scenario quite yet?
I have a HP Touchsmart IQ500. Turning my computer PC on today, all I got was a blue HP invent screen with setup, boot menu, system recovery, and system diagnosis, and I could not get past it. I entered the BIOS and figured out that the hard drive was listed as "not installed." Pretty sure that is the main problem.I tried a system restore (with the Windows 7 install disc), but I guess the computer couldn't read the hard drive enough to enter safe mode (I tried restarting and F8ing several times). I put in an external hard drive, and the BIOS read it; however, windows does not allow you to partition an OS on a hard drive.
I have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable
Me and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?
I have a virus infected sata hard drive with windows 7 on it. It has the win 7 anti virus 2012 on it, and it's a cybercriminal virus. I have lots of files I want to transfer to the new sata drive. I already have windows 7 installed on the new drive. How do I get the files from the bad drive to the new one?
I have a USB Webcam 6.1.7601.17514 from Microsoft installed on a Fujitsu Laptop (Windows 7 ) and I want to copy and install it on another Fujitsu laptop (Windows 7).The other laptop the camera is not working and there is no webcam driver installed.
i have two hard drives:A 250gb and a 1TBWhen I installed windows I chose the 1TB, but just left my other in there as it had some files I wanted on it. Now when I try to remove the 250gb drive, windows will not boot up.I tried marking the 250gb drive as inactive, but then during boot up it would say bootmgr is missing, so i had to use the installation disk then mark as active again.
How can i remove my Western Digital CASE i want to take the hard disk and plug it into my Pc and see if i can view my files cause i don't want to lost them
I'm planning on buying an Asus Zenbook UX32VD soon and it comes with a standard 7200 rpm drive instead of an SSD. So because of that i want to upgrade it to an SSD drive.But I also want to have the same windows thats installed moved over to the new drive. The drives i've looked at all have data migration tools and one comes with norton ghost but i've never had to do something like this before where i didn't have an optical drive and a windows disk for a reinstall so i'm looking for some help here before i order everything and then do something stupid.i don't mind if i have to lose whatever settings and data i might have setup already, but i just want to make sure i have the same windows and the additions it comes with moved over to the new SSD drive.
I have tried numerous times on my PC to install Windows 7 onto my Sata Drive to no avail. Yet as soon as I plug in my IDE HD it installs fine.I have unplugged all external peripherals USB and internal Card Reader. Set my Bios ok as it sees both the Hard Drive and DVD fine (Both in the bios and during selection of hard drive during windows 7 installation). Yet when I come to install it, it craps out at a random percentage saying cannot read from source or worse yet it crawls so slow through the percentages (I really don't think Windows 7 should take 6 hours to get to 15%!!) Yet both the hard drive and dvd are fine and the disc works great on my other PC without the sata drive in.
My motherboard is a Biostar G31-M7 TE with latest bios now what is odd is that I recently updated the BIOS to the latest one so does my problem come from here or was it always going to be a problem on this board? Also when I do have Windows 7 installed on the IDE drive when I plug in ther sata drive inside the whole system goes belly up (from freezes when transferring large files to just not seeing the drive)
I have an Alienware M14x R1 with a SSD - Crucial M4 in the main spot and the stock HD in the optical drive. I have never had any issues with any of this stuff before this clean install - and I have done clean installs previously. I also used Parted Magic to Secure Erase my SSD and HD before install.I am experiencing some pretty frustrating problems:
1. I have NO INTERNET CONNECTION (everyone keeps telling me to install drivers...how can I do this without internet connection??)
2. Windows is not recognizing my second hard drive in the optical drive even though it did when I was installing and showed it at the section where you can add new partitions etc
3. My display adpater is not working as I have a 1600x900 screen and I can only go up to 1024x768...
make a dualboot comp by adding windows XP to a new partition. I created the new partition with 20gb. (From the 500 of my actual harddrive)But before I actually installed on that, I got distracted with a second harddrive that my dad got(for no reason). It had a full copy of Windows XP backed up on it from another computer, so I figured I would just use that for the dualboot. I plugged it in (wired the same way as my old harddrive, but different data slot), restarted, checked the harddrive in explorer - all the data was there / reading correctly / etc, and I used 'easyBCD' to add the new harddrive to the boot list.(Which, of course, crashes if I try to start it. I just wanted to see what it would do). For a reason I can't remember, I unplugged the second harddrive for a bit, started the computer on accident (I don't know if anything loaded before I shut it off), and then when I plugged it back in.Windows 7 would not launch. It goes to a DOS-like window, except it's just a flashing _ and it never does anything even after a few minutes. XP didn't work still.. so I decided to reinstall XP (as I couldn't tell which harddrive was which on the list, I unplugged the main harddrive while installing onto the new).. and when I did this.. it formatted and installed fully... then restarted.. then restarted.. and restarted.. and just kept restarting, never showing any thing past the manufacturer logo/BIOS load-button-message-thing. So, I then try to use my 3-disk Windows7Recovery disk(burned myself with a program apparently included by the manufacturer.) It installed fully, appearing to work.. but when I launched it, it said "Invalid Partition Table" and wouldn't boot past that. When I insert my driver installer disk, it gives me a basic DOS window thing. dir A: shows the files in the disk. dir B: for some reason shows the same. C: says "Error reading from drive C: DOS area: general failure". All other letter:'s just say "invalid drive". (I'm doing this with both harddrives in.) I attempted connecting the harddrives to an old computer, but it gave an error for both. (It detected the harddrives, but said it had an error reading from it. Windows Explorer asked me to format it... {i'm willing to format one of the drives if anybody thinks it will help, but the old harddrive has data I'd prefer not to lose.} ) Looking on google, I saw several problems that all have similar problems (less overdescripptive than I am though) but none of the fixes suggested worked for me. Also - as I have two different with different errors, I only need to make one of them work.)Also - my other available computer has a CD burner / floppy drive if either are required. I also have several USB's. The computer can boot from USB's and CD's (tested), and I could easily take the floppy thingy and connect it to the computer.also - this computer is probably still under warranty unless unscrewing the hard drive voids it. .. does that count as modification of the computer?
1st. Installed XP on IDE drive, 2nd. installed a Sata drive, installed Windows 7 on that drive, want to remove the IDE drive, is it as simple as disconnecting the XP drive and do a startup repair, or is there going to be an issue with the XP drive being the Active drive, will startup repair make the Sata drive the Active drive?
I can't format my USB pen Drive, it shows the error as "The Disk is Write Protected".I tried various methods to solve this but all are not working.Like regedit.msc,devicemgmt.msc,DOS prompt & safe mode command prompt.
I recently installed windows 7 home premium 64 bit, previous OS was Vista home premium 32 bit. My desktop is an HP pavilion d4650y. I have the OS loaded on my main HD which is a SATA.
HD & DVD drive worked perfectly before on vista. I tested both devices on another pc with XP and they work fine. I've triple checked the connections but still the devices are not recognized by Windows 7. I've also tried renaming the HD & changing the drive letter, but still no luck.
Both drives are connected to a PCI E card, and are set to cable select, on separate cables. In the BIOS both drives show up. In disk management they do not show up at all.
My HD is a western digital 250 gb EIDE, and the DVD drive is a IDE Pioneer DVD burner (secondary disc drive).
Recently i bought a windows7 Ultimate, and i want to install it on my laptop. , my laptop working with vista.My hard disk drive has two partitions. one is OS(C: ) and another is called Recovery(D: ).my question is: How can i remove Recovery driver (which is related to vista) and install a completely new Windows 7 on my laptop?
having a laptop with windows 7 and Linux installed in the same drive .....nw windows 7 got detected as Not Genuin .....so want to format but linux is still in the same drive ......i want to remove windows 7 without removing linux or any else data frm the drive......
i want to remove all data from my c: drive which has win 7 ultimate without removing my os and my d: drive which has win8 pro + data should not be affected.
I want to remove my optical drive (ASUS dvd/rw) as I never use it, however after I disconnected it Windows wont load. It begins to load and then flashes a blue screen and restarts. If I plug my optical drive back in everything is boots up fine. how I can remove my drive and still be able to boot?
Things I have tried (with no success):
- Disabling and uninstalling the drive from the control panel
- checking boot priority (SSD is my boot drive), optical drive is now completely removed from boot sequence in BIOS (it was 3rd)
In windows repair (following the restart from blue screen) I found this: Root cause found recent driver installation or uprgrade may be preventing the system from starting Repair Action: system files integrity check and repair Result: Failed Error Code: 0x490
