How To Reboot A Acre Laptop
Jan 11, 2012my daughter was killed in a car accident and we have her acer laptop which is locked with a password...
View 2 Repliesmy daughter was killed in a car accident and we have her acer laptop which is locked with a password...
View 2 RepliesWindows 7 Home Premium 64-bit OS, HP G61-304NR laptop is auto rebooting over and over again. I have tried system recover from my recover disks - it did not work. I ordered system recovery disks from HP and had the recover disk reformat the Windows partition (I have a valid backup of this computer).Tried to boot in the following modes:
-Safe Mode
-Safe Mode w/Command Prompt
-Low Res Video
-Disable Driver Signing Enforcement
None of these things work. It appears that the problem may be associated with atipcie.sys driver. I assume this because the safe mode driver boot stops at disk.sys and the next driver that needs to load is atipcie.sys. At that point, the computer goes into windows and then reboots. I cannot get to a command prompt. I have tried to get to a command prompt by booting from the recover disk, by booting through safe mode with command prompt. I cannot get there. The laptop successfully gets through BIOS, and goes to Windows, but then it goes through some command screens (looks like scripts, cscript.exe), but then automatically reboots.
I manually shut down my computor after a night of online gaming. Next morning turn on, screen remained black, but could her computer try to reboot but sounded like it was stuck recycling. Light also flashing for number lock and capital lock. I am using HP pavillion fv7.
View 1 Replies View Relatedi want to reboot my laptop but i have to type in administrator password
View 2 Replies View Relatedhow do I sort my laptop out, it wont reboot its showing 0x0 samsung windows 7
View 1 Replies View Relatedhow do i reboot my samsung laptop?
View 2 Replies View RelatedWindows 7 will not boot on my HP Laptop G56. The HP logo come on when powered on and then there is just a blank screen with the cursor. I did the diagnostics for the HP side at boot-up and it informs me everything is OK with the hardware. How do I get a reboot disk for Windows 7 since they are not given with computers like in the past.
View 3 Replies View Relatedi had to replace harddrive i went form 320gb to 400 gb had a friend downd load a copy of windows7 then i order windows 7 from gateway did what ins. said look like it done good download then it came up an said it had a error and can get it to reboot how can i fix this
View 1 Replies View RelatedAfter upgrading to Windows 7 everything worked fine for about 3 months. I had it set to sleep when I close the lid nnd it worked well. But suddenly it began getting pernickity. When I opened the lid, about 15 - 20 seconds later the computer totally froze and I had to reboot. Of course, when reloading I get the message that Windows shut down unexpectedly and a 'solution will be searched' but nothing every happened as far as that goes.I made a new profile but it did the same thing when working in that.At approximately the same time as this began, I lost my 'start menu' list, and although I can 'attach items to the list, upon reboot, they disappear.
View 2 Replies View RelatedI reformatted my hard drive to install a copy of Windows 7 Ultimate, 64bit (I had Windows 7 Premium, 64bit before) and the installation ran just fine. After the installation, it boots up to what I guess is the desktop, waits a few moments, then just reboots. Every time before it boots it goes to the "Windows is loading files..." screen. I also tried 32bit, but got the same results. If you need more information, just ask and I'll be glad to provide it for you. A USB stick was used to install.
View 9 Replies View Relatedi7 quad, 8g ram, Home Premium. Delivered Thursday this week. Updated all the way, AVG antivirus, Comodo Firewall (FW only!). every startup, every reboot, the blue tooth (Targus and MS) mouse is incredibly NOT smooth. 20% more and it would be unuseable. If i go to the View Bluetooth devices and remove the mouse then fresh search for it-find it-install it, now the Bluetooth mouse is as sweet and pleasant as can be. If I remove it before shutdown the find and add after boot, same thing.But just reboot and it's back to horrible. A wireless mouse (with dongle thingie) works fine, anytime. Phone and online chats with Dell have led to them pointing me to the Intel site for the driver packageBT_2.2_s64.exe. Downloaded, installed, exact same behavior.
Reboot and the mouse needs a kick- remove and rediscover and it's fine. Uninstall the Intel package, base MS/Win7 bluetooth enum, same thing.Found similar but more comprehensive driver and installer package for the Intel 2200 half card wireless on Lenovo website. (300+MB!) Installed it, at least it does Install the Intel ProSet package into running/starting services.. Same mouse behavior. Tried setting some things to 'Auto-Delayed start'...Search the internet and I see a lot of people have the similar problem, some even when the close the laptop lid and reopen- or half a dozen variations on this.Even more frustrating is I have a slightly aged Inspiron N5010 Laptop with W7 home prem that these same mice work flawlessly with it;s Dell 365 bluetooth module.
My computer hard drive crashed a week ago and most of my back-ups went with the system. So, I got a new 500 GB drive and have been re-installing everything from scratch. I started with a clean install of Windows XP (service pack 2), which took forever to get all the up-dates done. Then I upgraded to Windows 7 and did the up-dates for that. I didn't make a recovery disk at this point because I wanted to get everything installed first.Unfortunately, the last time I went to reboot it failed. When I power-up the computer it stalls out on the Dell BIOS screen. I can't get into Safe Mode, Setup, or the Boot Menu because my keyboard and mouses are not working. They are both USB and none of my USB ports are working. (Also, I have not PS/2 ports on my machine.).
View 5 Replies View Relatedmy pc shows reboot and select proper boot device or insert boot media in selected boot device and press a key how can i collect my data.
View 1 Replies View RelatedI just reinstalled W7Ultimate so i can do a clean install of SP1 but before i installed the sp1 i get this error when i reboot.
View 1 Replies View RelatedThe reason I ended up there was because I was getting a problem where, at random times during random programs, the computer would lose signal to the monitor... Pause for a while, then reboot. Figuring I might have old hardware profiles that needed updating, I went to check my windows updater and found it was disabled... A short series of checks and Gringo was head to head with a Zero Acess Infection, which he promptly kicked the backside of.However, since then, the black screen issue has returned. It seems it wasn't Malware related. It doesn't seem to have any obvious pattern. Sometimes it happens when nothing it happening at all, and when I get back to the computer there is just an error log.Sometimes it happens twice in a row, sometimes not for hours. CPU and GPU seem to be at normal tempsWhen windows reboots it has the following error log: Problem signature: Problem Event Name[CODE]
View 14 Replies View RelatedDoes anyone know of a software available that lets you reboot from Windows and choose another OS besides the auto default, in a multiboot scenario?
I need something like this because I Dameware into my other computer a lot and would like to be able to get it to boot to another OS than default, remotely.
I guess I could use EasyBCD to change the default OS when I want to reboot but hoping to do this without editing bcd.
I followed the turorial and tried three or four times to make a VHD and it works but upon re-booting my PC the VHD I created is gone. I can get it back by re-attaching it but reboot and it's gone again. Oh my Bios is set up correctly in case any one asks.
View 2 Replies View RelatedI remember a functionality in Vista/XP where you could hold the SHIFT button for a warm reboot which effectively avoided having to go through BIOS POST.
I have tried this in Windows 7 however no luck.
Has this been removed? if so that suck cause i have a RAID controller which takes a long time to go through all of its tests/init.
Anyone?
I was running Windows XP and kept the system up for weeks on end. I just installed Windows 7 7600 last night and throughout the night the system will just restart. I saw some "power" labeled things in the event viewer mostly some wake on things with an "unknown" source but honestly it's not shedding much light on things. Is there anything I can do, change or install that will monitor why this happens?
View 7 Replies View RelatedI just updated Windows 7048 to 7057. It worked perfectly except
that whenever I reboot an empty notepad screen appears which is
labeled " desktop.ini - Notepad " .
I Cannot find anything in the desktop file which would cause this.
I got a bsod after i rebooted i didnt even make it to startup omg why! It took me to tartup repair but the attemping repairs is endless.
View 1 Replies View RelatedI have been following the progress of Windows 7 through beta stages. I currently operate on Windows XP SP3 which runs great, however Ive very recently decided to go for WIndows 7 beta. I completely backed up all my information, booted from DVD, formatted and then started to install.
It copies/ expands all the files to 100%, then does a normal restart, It then comes up with starting windows> registering entries etc, the carries on finalising the install only to reboot itself?
After the reboot it gives me the windows recovery screen. If it tries to boot up it just goes into a reboot loop. I am sooo confused.
The thing is I would say I know my way around PC software and Hardware very well. I have tried different BIOS settings, Optimising defaults, Load-Fail Safe Defaults, Creating New Partitions etc.
I've been trying to install Windows 7 on a brand new computer. It's running RAID 0, and I'm using the latest drivers from my motherboard manufacturer.
Starting up the installation seems to work fine. It goes through the first phase of installation where I choose which partition I want to use, and it starts to copy files from the dvd, yada yada yada. After the "installing updates" section, a window pops up with the following message:
"Windows could not prepare the computer to boot into the next phase of installation. To install Windows, restart the installation."
It then kicks me back to the start of installation. If I start the install again, it does the same thing. If I reboot and restart installation, also the same.
If I try a startup repair, I get a message saying that Startup Repair cannot repair this computer automatically.
I've tried this on two builds--7000 and 7077. Both have the same result.
Whats your Restart Time?
View 9 Replies View RelatedHave installed Realtek Semi. Corp.,
Driver date: 10/28/2009
Driver version: 6.0.1.5969
All functions work fine, but when I reboot Windows 7, after the reboot the audio volume is set to max (100%); this does not happen when rebooting into Vista Ultimate x64 or XP Pro x32.
I followed the turorial and tried three or four times to make a VHD and it works but upon re-booting my PC the VHD I created is gone. I can get it back by re-attaching it but reboot and it's gone again.Oh my Bios is set up correctly in case any one asks.
View 9 Replies View RelatedOnce i reboot my computer I get the issue shown in the picture attached.
In order to fix it, I go into the screen resolution and change it. Everything will go back to normal and I will then revert it back to the original. It's a tough thing to explain, so I havnt done much googling. any ideas?
Oh and it started happening after I added the RSS feed. I have tried removing it but it doesn't seem to help.
I have a Dell Inspiron 1440, and after it crashed while I was out for Dinner yesterday, I have been encountering so many problems..Yesterday, I was able to get back into my "Account" and access my desktop, but after a few minutes of being on, every single program/application I had opened turned "Not Responding" and stayed that way.
Now today.. I thought it had gotten better, so I did virus scans, registry updates, defragmenting, all of that, and my Laptop worked fine for a few hours. Then it became worse.
I scheduled a Disk Check, and when it finished, it restarted my laptop, but after the Windows Logo that pops up, all I get is a black screen and a cursor that I can move around. This not only occurs in Normal Mode, but Safe Mode, Safe Mode + Network, and Safe Mode + Command Prompt
Before I go along with my rant, I'm not a computer expert nor near one. I'll try to provide as much information as I know/have. I'm desperate for any answer and if this is located in the incorrect aI have a Lenovo Windows 7 64-bit laptop. I currently have 4.00GB of RAM ( 3.80GB usable ), my processor is Intel(R) Pentium(R) CPU P6100 @ 2.00GHz.I've always had problems with my two USB slots and the bottom one stopped working all together. Last night, after pushing my USB cord in the incorrect slot, I heard a crack. After replugging my mouse into the correct USB slot, it would not work. After rebooting my computer, it completely slowed down as if someone recorded what I was doing on the computer and played it in slow-motion.
Start up took about 5 minutes and was quite sluggish. It told me to pick an OS and my choices were either "7" and I forgot the other option, unfortunately. Freaking out, I tried to shut it back off, but once I took my finger off the button, it turned on automatically no matter how long I held it down. This time it asked if I wanted to " repair ( recommended ) " or start normally. I chose to repair my computer and it showed no difference.When I finally got on my name I right away noticed the sluggish performance. Again, it was like my actions were being performed in slow motion. I turned on some music and instead of hearing some lovely piano, I heard a completely lagged song. When getting on my internet ( which I'm still struggling with at this moment ) it took me nearly half an hour just to create an account here, when usually I'd be done lickity split.
I was told by a few friends who are knowledgeable with computers that the USB cannot effect the actual hardware. I'm afraid that, that crack I heard at least did something, since right before I restarted the computer it was working fast and perfectly. Mind you, this computer is only 6 months old.I restored my computer and it made no difference. I check for viruses and malware everyday ( using Spybot, microsoft essentials and malwarebytes anti-malware ) and my results came clean. I'm sorry for the long rant, but I tried to provide as much information as I could. I did try contacting Lenovo, but I do not have a phone nor a cell phone due to financial reasoning and that's the ONLY way to contact their tech support.
When I first use my Drive E and insert a disc it works fine. When insert a second disc later I keep getting the information from the first disc and cannot use Drive E for another disc until I reboot. I do have another drive (F) but would really like to resolve this problem.
View 8 Replies View RelatedThe problem is minor and it's just a bit of an annoyance I've been dealing with from time to time.[CODE]Basically, If I were to I put my computer to sleep(using the sleep function, not hibernate) and try to wake it up within a few seconds, the computer would go into an automatic reboot loop that would continue to boot, shut down, boot, shut down until I turn off the PSU completely. I'm trying to figure out which component might be causing this problem, if any. I've updated my bios, drivers, and ran memtest but nothing seemed out of the ordinary and it didn't fix the problem.
View 2 Replies View Related