I moved from dsl to cable and of course changed routers. I have three computers on a network and and an HP officejet J4680 which had a ip of 192.168.1.68 on the old network and everything worked well. On the new network the printer ip has changed to 192.168.1.2 and the computers can print to the printer ok however I cannot scan a document. The paperport software seems to be looking for 192.168.1.68 and I cannot find a way to get paperport to look to 198.168.1.2. The exact same problem exists with irfranview.
I've changed my internet provider and the provided router uses a different range from my old one. The printer (OKI M361) needs a fixed IP. How can I change it back to DHCP so the new router can detect it and I can make it permanent?
I really want to change my ip address. Not the ipv4 one, but the actual one e.g. the one when i go to [URL].I am Running Virgin Media Broadband, and recently got a brand new Hub [URL] along with a new ip and i was told that it is "dynamic". But if i reboot it etc it still stays the same? what can i do to change it? im on Windows 7... and im on a laptop with wireless.
I would like to know if it is possible to change my Ip address because i don't know if it is possible for web owner to block my IP because i'm trying to access a website my from my laptop and it's saying i cant but when i go across the street to use a diff wifi signal the site works fine
I am using acer as 4738z(intel pentium p6200). os: windows7.my adapter name is Atheros AR5B97 Wwireless network adaptor. i want to change mac of my adaptor completely.My mac address is 1C-65-9D-C2-68-AB. I want to put the value 70-F1-A1-5C-BE-7C.
This isn't a question about a printer sitting somewhere in the house.During tax season we go to the local library to do free tax preparation. We use an online program. We plug in our Ethernet cable to the library's system and each laptop has a static IP to identify it to the network.What we would like to do now is bring in a wireless printer to use for tax forms. Attached directly to this printer is a small router we have used before. But if we simply pressed the print button, I suspect it might look on the libraries wireless network for that printer.Besides assigning a static IP to this printer, I'm thinking we might also have to include the MAC address as well so it finds that router connected to the printer.
I have been doing a lot of reading on how to change your IP and to me in windows 7 it is not possible. How to change (Dynamic) IP address in Windows 7 or Vista? How to be able to change there IP? I have tried everything. run/ipconfig /release, unpluging modem and router and no change.
i recently was new to omegle and in about a week or so i was " banned " and automaticcaly redirected to a pornography site.how do i change my ip pass on a mini gateway windows 7 laptop without unplugging the router?
how to change my new email address over to the old computer ..the older computer still has the previous email address on it Now that server has closed so I need to rid the old computer of the old email address?
I have a Linksys WRT54G v2 & latest OEM firmware. A few days ago I tried to release & renew my IP address to get a new one. It did not change, and just thought the Comcast modem was remembering the IP and just went about my normal web surfing. Today, nothing would connect to the internet. My WRT54Gs status was fine & had the same IP it had a few days ago.
I tried to release & renew the IP again, nothing changed. I called Comcast tech, and the automated thing reset the modem, still no internet, still same IP address. I released the IP & unplugged the router for about 5 mins, renewed & got the same IP again. I released again, and reset to factory defaults, same IP again. I tried connecting directly to the modem and see if I works, and it did!
I had another D-Link DI-624 Rev C v2.70 .. released the IP, and hooked it up .. everything works fine. So for S&Gs I released and hooked up the WRT54G to see if the IP changed at all, nope same IP! I would like to use the Linksys again, as the D-Link sometimes got funky under heavy load.
There are programs to accomplish this, but here is the roll-your-own method of changing the Media Access Control (MAC) address of your wireless adapter.CHANGE YOUR WIRELESS MAC ADDRESS
The possible MAC addresses in Windows 7 for wireless adapters: X2-XX-XX-XX-XX-XX X6-XX-XX-XX-XX-XX XA-XX-XX-XX-XX-XX XE-XX-XX-XX-XX-XX WIN | cmd.exe | enter | Ipconfig /all > ipinfo.txtIpInfo.TXT has your original IP address.WIN | DevMgmt.MSC | ENTER | dbl-clk on Network Adapters |rt-clk on your ...Wireless Network Adapter | Properties | Advanced tab | select Network Address (in Property area) | Value radio button | enter desired MAC address | OK
Examples of MAC addresses: 023344556677 16A098765432 3Affeeddbbcc 4E44667799aa
WIN is the key with the Microsoft flag on top. MAC Media Access Control address
I am using a windows application which has a feature to change the IP address to 10.XX.XX.1 to connect to a server and restore it back to its original address on exit of connection to the server. The windows application is run with administrator rights. Now i want to run the application without admin rights and change estore the IP address. My application for changing the IP it uses netsh commands from command prompt.
we have Laptop's with windows 7 professional 64bit in domain. admin rights are restricted to the domain users. But many users most of the time use to travel out of station and need to change the IP that time. I tried adding domain user ID's in "network configuration operator" group but still not able to change IP from domain user without giving admin right. can any body tell me any other processes to change IP from domain user not having admin rights in windows 7 ?
I have added a windows 7 computer on a network with a network printer which gets the address dynamically but Windows 7 gives it a static address during configuration and cannot find the printer when the address changes. All other computers on the network are OK.
Just want to clarify one little item regarding thunderbird backup.I have the mozbackup installed just would like to confirm my setting just for the backup of thunderbird emails,Address book & My settings This my setup,Is it correct or do I need to change some of the check boxes?
My internet connection shows 'no internet access' even though my ISP shows the connection is coming into the house just fine. I usually use a router (NetGear-WNR3500U) but I right now I have the Ethernet connection plugged directly into my PC. I tried directly plugging into my laptop and the internet works just fine. So I know the problem resides in the PC.
Some troubleshooting things I have tried.
-Power cycled my modem, router and PC.
-Repinged my connection from my ISP(Comcast Xfinity)
-Used the reset option on the router and the modem
-I was walked through the internet options needed with the tech support from my ISP to make sure DHCP was enabled and every other setting was correct, and he cleared me that all settings were correct.
-Tried ipconfig commands to /renew and /release my IP When I tried ipconfig /renew I get the error 'An error occurred while renewing interface Local Area Connection : unable to contact your DHCP server'
-Restored my PC to a restore point where the Internet was working
All of these options did not work.
What I think the problem is and I am not sure how to fix it, when I run the ipconfig /all command my Auto configuration IPv4 Address shows 169.254.112.76 which I was told is a router IP address even though I am plugged directly from the modem to my PC with an Ethernet cord. So I think that's my problem? But I am not sure.
