My OS is Windows 7 Home Edition 64bit. Recently I'm learning to make videos and my routine is editing the raw file in Windows Movie Maker then adding some effects to it in Adobe After Effects. I've been doing fine for months until suddenly the blue screen appeared. At first the problem only occurred occasionally when I tried to import to or export from WMM. But then it happened more and more often even when I was doing nothing until it reached the point where my computer couldn't even make it to windows anymore. I took my friend's advice and reinstall windows but that didn't fix the problem.
I've been getting the BSOD about 2 minutes after startup. During those 2 minutes, I won't be able to open anything and many of my background apps crash. I managed to reach Safe Mode
what this following error code means? I'm guessing it's some kind of hardware failure but I can't figure out what. I bought a new western digital caviar black 1TB hard drive, installed it with Sata cables and installed Windows 7 ultimate on it and it worked fine for a couple of days. All of a sudden today I get this error. I should mention that the reason why I decided to replace the hard drive is because my other hard drive(s) were fine until one of their sata cable broke in half and even tho I replaced the sata cables on those drives they still won't boot and would cause BSOD's. So, I decided to buy a new drive and new cables and try it.
I have been getting a BSOD every couple days. The error is a system_service_exception with stop code 3b. (STOP: 0x0000003b (0x00000000C0000005, 0xFFFFF9600010D010, 0XFFFFF88E011B40, 0x000000000000)To explain further, I have had this exact same error on TWO different computers, one of them completely new, while running the same combination of programs/drivers. They are both Stop code 3b with Parameter 1 the same, 0x00000000C0000005 (though Parameter 2 and 3 are different for each time the BSOD comes up). The two computers have different graphics drivers, so I believe graphics drivers can be ruled out as the problem (one is a AMD Radeon 6750M, the other is an Intel HD Graphics 4000). The graphics drivers are also updated. They are both running Windows 7, one is a Lenovo ThinkPad x1 Carbon, the other is a Macbook Pro running Bootcamp (I blamed bootcamp for the problem, which is why I got the new computer, but it seems that it is not the problem).
In both cases, I am running a 30" external monitor via a DVI-D to Displayport adapter, made by Accell (with additional USB powering). I believe this may be the problem, because after several days not using the monitor I did not have the crash. This is not conclusive though, because it normally only crashes every 2-5 days, but I think it may be a good place for a knowledgeable person to start. However, I used the computer for many months without any crashes with this external monitor, and it has only been crashing in the last month.I am also running a Logitech external trackball mouse and have a somewhat new Brother printer and it's associated drivers. I have Nod32 ESET antivirus, updated to the most recent version. I'm also using a program that uses a PostGreSQL database, and am running several applications at a time (not graphics intensive but I believe it does use up a fair amount of resources). For the most part, the crash has only happened after a couple hours of use. I have had all of these things installed and running on both computers when they crashed.
According to BlueScreenView, on both computers the error is caused by driver win32k.sys, caused by address win32k.sys+7d010. The crash address is ntoskrnl.exe+7efc0.My plan is to keep using the computer(s) without the external monitor, and see if they ever crash. If the monitor is the cause, I would hope for some solution that would allow me to use the monitor (I'd be willing to buy a new adapter if it might make a difference).I can't figure out how to upload the .dmp file, so you can find it here on another post of mine: http://windows7forums.com/blue-scr [...] post275928
I encountered a BSOD while just browsing the internet, I managed to get the STOP code of 124 though before it cleared. I HAVE been having some issues with my HDD not maintaining constant speeds during file transfers, so maybe its a HDD problem?
i have a feeling that there was a bsod when i had left my computer to download a file because when i came back some half an hour later, i found the error that windows has recovered from an unexpected error, plz check online for solutions....in fact today was the first time in around 2 months that i installed my windows updates, and i did them in stes of three with two batches.!st batch) KB2618451, KB2618444, Kb25720772nd batch) KB2538242, Kb2565063, KB2538243
I've been getting the BSOD sporadically for quite some time now and I am finally fed up. Here is the Stop error information:
Problem signature: Problem Event Name:BlueScreen OS Version:6.1.7601.2.1.0.768.3 Locale ID:1033 I've attached the dump file referenced above.
Here are some details on my machine: Gateway DX4300 AMD Phenom(tm) II X4 810 Processor 2.60 GHz 8GB RAM Windows 7 - 64-bit, full-retail Hardware purchased in 2010, Windows 7 upgrade occurred early 2011. Also, there are a ton of files in my minidump in addition to the one attached, is this normal?
My laptop has been crashing rather frequently, and is starting to be a pain. Microsoft Windows 7 Home Premium 64-bit, original installed OS on system, OEM. Bought in 2009. I have not re-installed the OS.
The BlueScreen that comes up has no line of data at the top on bold print! It has the STOP code at the bottom, but the screen only stays up long enough for it to quickly make a dmp file before it automatically reboots. Therefore, no idea what it's trying to tell me! Once it restarts successfully, the little window pops up with the BCCodes etc., and links to the Minidump folder. Oldest saved Info (after the first time, when I was clueless and closed the window):
Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.768.3 Locale ID: 1033
Additional information about the problem: BCCode: 1000007e BCP1: FFFFFFFFC0000005 BCP2: 0000000000000000 BCP3: FFFFF880039B2A28 BCP4: FFFFF880039B2280 OS Version: 6_1_7601 Service Pack: 1_0 Product: 768_1 Newest saved Info:
upgrade my system from Windows XP Pro SP3. The setup starts and gets past creating a user account, setting a computer name etc and then restarts and looks like Windows 7 is going to startup and then I get a BLUE SCREEN OF DEATH with:
STOP: C000021a [Fatal System Error}
The intial session process or system process terminated unexpectedly with a status of 0x00000000 (0xC0000001 0x00100400)
It then mentions about dumping the memory out to disk and reboots. If i press F8 and attempt to boot SAFE MODE I get a requester saying that setup cannot be completed in Safe Mode. If try the startup recovery the first time it says it fixed a problem and wants to restart again but it has fixed nothing. Next time the startup recovery just runs and doesn't appear to finish.
I have run the Windows Memeory Diagnostic within the setup and memory checks out fine. I initially thought the onboad audio chipset was the issue and disabled that but it made no difference. I did get one successful installation but it eventually crashed and burned with the same error after approximately 12 hours.
I'm randomly getting BSOD when my computer is not in safe mode. The last one I got I was able to get the error code and a mini dump file. Since I am not proficient in reading the logs
I have been getting a new BSOD error message, it was happened every 15 minutes or so while trying to play BF3 last night.I also ran a Memtest overnight, 8 passes and 0 errors.-x64-OEM-Asus mobo, i5, PSU, 8GB Ram, are all 3 months old when I did a fresh Windows 7 install.
Recently I've been getting this BSOD over and over. It happens about 20 seconds after my computer reaches my desktop when I start up. I happens about 95% of the time I start up my computer. The other 5% it starts up normally w/o any problems. ( Which I think is weird)I had recently bought a graphic card (check my specs), but I had it for about 2 months before I started getting the BSOD.
I keep getting BSOD's with three of them being 0x0000001e and one being 0x0000000A. I'm not sure whats wrong, as the system was running fine before. I have included the four dumps
Windows 7 Ultimate x64 Custom Built System Store bought OEM OS System Built January 2012 OS age June 2012 Attachment 222638
I was on my comp for about... an hour or 2 and it BSOD'd it happened before but hasn't happened in a while til now i restarted it and its running good but i would like to know why its happening the error code is 0x0000001e i realize this won't fully help you guys so i included a system health report and the DMP report OS= Windows 7 64 Bit Installed less than a year agoFull Retail
Windows 7 Home Premium 64bit. Bought as a student upgrade edition online. The computer is mostly new. I put it together myself and it hasn't had any problems until now. I had League of Legends up in the background, and I was surfing on Firefox when my mouse cursor...changed. It looks glitchy, becoming white/multicolored lines and looking fuzzy. I know that isn't right, so I immediately restarted my computer. After a few minutes it BSOD'ed, and now I am officially worried.
I started off getting the 0x0000007f BSOD and I think it was relating to my graphics card drivers so I reinstalled the drivers, now I've been getting 0x0000001e BSOD and I haven't a clue what the problem is. These seem to happen only once each day and I can't seem to find any relation to what I was doing at the time.
I recently got an ASUS X54H laptop and it has windows 7 ultimate x64. I randomly get the BSOD error 0x0000001a and 0x0000001e and I've tried updating the drivers and still no luck it could be running great for a week or so and then give me the BSOD. I've attached the .zip made from the performance monitor.
I've recently installed a new AMD 8150-FX 8-Core processor (Black Edition)Ever since I replaced my old AMD Phenom II 4X 965 Black Edition, with the above mentioned, I've had blue screens.Now this is only happening when I am playing demanding games such as ARMA2, GTA4, Crysis ect ect ect;I also note that it only seems to be happening when I've got the settings to Ultra or highest settings.Now I know that my PC is more than capable of playing today's best games on Max/ Ultra because I was playing with those settings on my old CPU.I'm sure this has got something to do with the new CPU.Below is a copy of what the 'Event Viewer' is telling me:The computer has rebooted from a bugcheck.
The bugcheck was: 0x000000d1 (0xfffff800480d47...., 0xfffff800480d479e). A dump was saved in: C:WindowsMEMORY.DMP. Report Id: 072012-33914-01.
I've been recently getting the BSOD when I open almost any program, when I try to open it my display stops and I get the BSOD error STOP: 0x0000001E. The latest thing I would have downloaded with suspicion would be a game torrent. I've gotten a BSOD error STOP: 0x00000050 and error STOP: 0x0000001a, but mainly error STOP: 0x0000001E. I'm thinking that my RAM is corrupted, looks like its a memory problem. I'm currently in Safe Mode with Networking. Anyways, sorry for using Winrar, I didn't have 7-ZIP installed.
If the computer is shut down and disconnected from the power supply for about 5 hours or longer I get a bluescreen right after the windows boot screen. Otherwise it starts without problems and works fine. My workaround for the problem after long shut down is to switch on the power supply, then immediately switch it off and then on again. This works always fine!
My System:
Windows 7 Home Premium 64bit SP1 AMD Phenom II X6 1090T Black Edition Asus M4A89GTD PRO/USB3 4GB (2x2) 1333-777 RAM ATI Radeon HD 5570
Blue Screen: *** STOP: 0x0000001E (0x0000000000000000, 0x0000000000000000, 0x0000000000000000, 0x0000000000000000)
I already used all of the windows debugging, diagnostic tools and Memtest but without success.
Had one of the fake viruses on my machine and so I download and ran Malware Bytes it now appears to boot up fine but within a minute or two of being in the Windows screen it goes to a BSOD. I have booted the machine with the MSDART 7 program and have attached the dump file to see what you all think might be going on. not being able to run the utility from this site but it does not give me enough time on boot before it does the BSOD.
Make: Acer Model: Aspire (5349-2481) Windows 7 64-bit Home Premium OEM install..
I built a computer about a month ago and ever since the first attempt to install windows it has been giving me blue screens. The computer is working someone fine most of the time now, but still has a daily to twice a day blue screen error. I have done everything that google has said (Memtest, driver updates, HDD diagnostics, BIOS update, check registry, scan for virus, etc.)
i always crash whenever i play need for speed world. it would start for a few minutes or a few seconds. im not sure if its driver related, overheating GPU, or worst, a dead GPU.
XP 32 bit. Has since had the drive reformatted.The Operating System was a student upgrade version but is now a full retail version (I called Microsoft Support a while back)System is approximately 1 and a half years old (Graphics card only seven months) It is self-built.OS is seven months old. I reinstalled the OS MORE TIMES THAN I CAN COUNT (whatmpted me to call MS) but the BSODs persisted.AMD Phenom II X2 555 Black EditionXFX Radeon 6870 1GBASUS M4A88T-M AM3 AMD 880G XFX 550W Core Editionrus Software: Malware Bytes Anti-Malware AND MSE OFCCPU-Z Validator 3.1(For a little more information)I was receiving constant blue screens throughout the month of December, and after having replaced my HDD and RAM (which didn't fix the problem) I RMA'd my processor back to AMD. I received the new processor in early January and went a full month without any problems. As of a few days ago the bluescreens have returned in full force.At this point I'm thinking it's a problem with the motherboard. But I'm posting here to make sure before I try to RMA something again.While I wait for a reply I will run memtest and a HDD diagnostic.EDIT: Also, I think it's worth noting that motherboard does not seem to be able to provide a steady current to the Vcore. If I set the Vcore to 1.35, it will fluctuate between 1.32-1.35.
