I have looked everywhere and can't even find a vista 64 bit driver for this can anyone help? Or can anyone tell me if the AVerMedia AvverTV Bravo Hybred PCI-e tuner is supported or where I can fnd drivers for the same 7100 64.
View 6 Replies
I have tried the 190 and the 185.85 drivers but when I try sli I get a 19 in screen on my 23 in what's up with running sli in win 7? When I enable sli it wants to close the Nview progem not allowing SLI is this build not capable of SLI? 3dmark05 win 7 11305 xp in sli 17326. I need some information on how to enable sli in win 7, both cards show up in device mngr. but no g.
View 0 Replies View RelatedI have windows 7 and just cannot find drivers for my Hauppauge 64405 LF REV C1 IMPACTVCB despite visiting the Hauppauge website/s, seems there are only drivers for up to win 2000?? Can you help? I need to transfer old VHS to disk.
View 2 Replies View Relatedi'm looking for the windows 7 driver for hauppauge WinTV 5.9c
View 3 Replies View RelatedI have something going on but not sure what. I tried system restore which is not working neither. Tried multiple restore points. Says they are corrupted or deleted.The computer boots a bit slow, but it was never a fast booter. The info it
Event ID: 7000
Source: Service control Manager
Seems to to do with my Killer NIC, but i dont even run anything off it and always worked fine when hooked up
Event ID: 7001
Source: Service Control Manager
Locale ID: 1003
States: The HomeGroup Provider service depends on the Function Discovery Provider Host servicewhich failed to start cause of the following error: The service cannot be started, either because it is disabledor because it has no enabled devices associated with it.I run a Quad Core with a geforce 560 and 4 sticks of ram. I ran malewarebytes and found nothing. It started when a program froze my computer.I rebooted, and when i did, my clock was messed up on wrong time and this error has showed up on every reboot now.
how to get around the Hauppauge WinTV PVR PCI II (23XXX) problem where the card wont work with with Windows 7 64-bit and more than 4 GIG's of RAM? This is getting really frustrating and Hauppauge refuses to help/ They just keep chantung that I have to remove some RAM from my system.
View 5 Replies View RelatedI have a problem with this device in media center Hauppauge Nova-T Stick DVB-T Tuner Device, it works if i select a channel then re boot pc but as soon as I change channel I get no picture or sound, does anyone have a solution to this problem.
View 0 Replies View RelatedI bought a brand new 2250 card with remote and the remote does't work. I plugged in the IR sensor to the TV tuner and put new batteries in the remote and the light flashes on the remote when I press a button but the tuner is non responsive to it. I tried using it in both Wintv 7 and Windows Media Center. I've spent about 10 hours doing everything possible and even bought a new cable, but nothing.
When I click a button on the remote should the receiver flash red? because I am not getting any red flashes on the receiver, but when I restart the IR blaster does light up red for about 5 seconds.
IR.exe is running. here is the remote I have: [URL]
Ive re-installed windows twice since the pvr stopped working but ever since I just cant get the drivers to install no matter what. I use Windows 7 Home Premium 64bit SP1.
View 9 Replies View RelatedI'm running Windows 7 32 bit and I just noticed that all my drivers for the USB controllers, Audio/Sound devices and the Networking internet (Broadcom Netxtreme Drivers) have all died. They indicate that a Code 39 is the problem. I tried to load some of the drivers but it wouldn't allow them to install. I did a last known configuration attempt, no results. Did a system restore and it gave me an error message saying it didn't restore properly. I am trying to get the drivers online, burn them to a disk and load them. I have no internet access on that PC and the USB ports obviously don't work. I can get drivers on this PC online. Some I can't find. I did the uninstall driver, disable, all the usual for this problem. I am stumped. Any recovery attempts produce nil results. Thanks to Microsoft, I have no installation disc to do a new install or a backup image.
View 3 Replies View RelatedComputers says thers audio and drivers are all correct and enabled tried reinstalling the drivers. but still. No sound?!
View 3 Replies View RelatedDRIVERS FOR sony laptop model PCG71312L DRIVERS DOWNLOADS?
View 1 Replies View RelatedI NEED NVIDIA DISPLAY DRIVER FOR TOSHIBA SATELLITE C665-I5011 LAPTOP
View 2 Replies View Relatediam using windows 7 ulitimate 32 bit.while connecting net setter does not recognise the system .what is problem? solve as soon as possible.
View 1 Replies View RelatedI'm taking a ghosted image to another machine. On the image I have my device drivers set with static IP (e.g. Local Area Connection 1 is the static IP I want). I have two local area connections, 1 and 2, and 1 is what I want it to be while 2 is a default Microsoft IP.I put that image onto another system and after loading it I don't have Local Area Connections 1 and 2 anymore but Local Area Connections 3 and 4. When I first boot, the computer says Device Drivers Successfully Installed.Why am I losing Local Area Connections 1 and 2 and thus creating 3 and 4 which both have default Microsoft IPs? I want to retain the Local Area Connection 1 that has the static IP that I desire.
View 5 Replies View RelatedHaving issues with RAID0 array being detected by Windows7 Ultimate x64 as SCSI. Apparently these drivers are the 'default' drivers that install when the RAID array is initialized. There is no option at this point to install other drivers instead.Using DeviceManager, there is an option to 'update drivers', and regardless of the method chosen, even selecting the file for a previously-downloaded set of drivers, Windows7 always comes back with a message of "Windows has determined that the best drivers for your system are already installed". Considering that SCSI drivers are the OLDEST ones out there, and actual SCSI devices are becoming rarer and rarer, how is it that these drivers cannot be replaced with more current and more applicable drivers?
View 5 Replies View RelatedSony vaio e series drivers for windows 7 64 bit LAN drivers?
View 1 Replies View Relatedsend webcam & audio drivers for HP G 6000
View 1 Replies View RelatedI've installed Windows 7 instead of Vista in my Vaio vgn-fw250j. After that cd-dvd does not read nor burn dvd's.
View 1 Replies View RelatedI've recently been having various issues with my pc, among the things I tried to do was update my graphics card driver: found the newest driver crashed madly, and rolled back.What benefits are there in going for the newer ATI Catalyst drivers compared to the one defaulted by windows but which hasn't updated in 3 years. Generally what could have changed? Compatablity? If it works it works. Stablity? Performance? Heat management?Since it takes me 2 hours to download a driver (slow connection) I'm sticking on my Windows 7 default ones: I know they work. It does make me ask though if there is a benefit to upgading after i've got my PC stable again.
View 5 Replies View RelatedWhats the recommended installation procedure for installing drivers for specific hardware from a developers site or using the windows 7 default drivers?
For example when I install my windows 7 x64 Betas it found and installed the drivers for my chipset and everything fine. However browsing my Motherboard manufactures website I see they Drivers for chipset, audio, and other components I can download.
Would you recommend I stick with Microsoft drivers or use the drivers on the developers site?
whether I can replace the Elantech drivers with Synaptics drivers, I have tried adjusting the sensitivity in my Elantech touchpad in my Acer Aspire 5750 but still not comfortable with it.I have tried to use windows7 generic drivers by uninstalling Elantech drivers but when I restart Elantech drivers are installed again. would preferably like to install Synaptics drivers if that's possible but I am not sure whether that will work.
View 2 Replies View RelatedI have a simple question, I recently fresh installed Windows7 and was wondering if I should Install the new mobo drivers from the ASUS site (i have an ASUS P5Q Pro) or should I just keep the current microsoft drives for all the chipsets/lan/etc. The only Thing I installed was the Realtek sound driver. Would there be any advantages to install proper drivers? because right now my computer runs perfectly stable and smooth using the Windows7 ones.
View 5 Replies View Relateddownload dell optiplex 380 drivers LAN drivers
View 1 Replies View Relatedcan't find ethernet drivers for sony vaio vpcea31fx windows-7 64-bits laptop.
View 2 Replies View RelatedI have a GTS250 made by EVGA. When I installed windows 7, it knew it automatically.
I would prefer to leave it alone, but I am I missing out? Will it perform better with the Drivers from EVGA?
I've just updated my Acer Notebook to Windows 7. I've installed all the drivers that Acer supplies for Windows 7.
But what about the drivers that are not supplied? Should I install the ones that Acer supplies for Vista or stick with the 'pre-installed' drivers by Windows 7 ... Everything seems to work with the pre-installed ones.
And how do I check wether or not the Intel Turbo Memory is working correctly?
Have one question, When I installed Windows 7 the only drivers I have installed were my video and audio which are not part of the motherboard (not onboard). My computer runs fine but 1 game but more or less I never installed any driver for my motherboard.
Normally you install the motherboards nforce drivers, raid SATA/IDE drivers etc... Do I need to go back to my motherboard vendor and find updates for windows 7 or just leave it they way it is, or should I install the drivers off the motherboard CD I have here? My mobo doesn't have any windows 7 updates btw there all windowsXP based drivers.
How can i get ethernet drivers optiplex 380?
View 1 Replies View RelatedOn my Lenovo W510 laptop I'm currently using the 14.1.1 PROSET drivers from Intel's website for my Centrino Ultimate 6300 wireless adapter. Lenovo just released new drivers on their web site with 14.02.0000. Going off of numbering the 14.1.1 drivers are obviously latest although I have seen that whatever drivers are made for Lenovo are always a little different (features and such). In this case is it better to go off of the laptop manufacturer's drivers (even though they are a lower number and seemingly older) or the wireless manufacturer's page (Intel).
View 1 Replies View RelatedLAN drivers for Dell Optiplex 380 for widows 7.
View 1 Replies View Related
