I have a problem with this device in media center Hauppauge Nova-T Stick DVB-T Tuner Device, it works if i select a channel then re boot pc but as soon as I change channel I get no picture or sound, does anyone have a solution to this problem.
View 0 Replieshow to get around the Hauppauge WinTV PVR PCI II (23XXX) problem where the card wont work with with Windows 7 64-bit and more than 4 GIG's of RAM? This is getting really frustrating and Hauppauge refuses to help/ They just keep chantung that I have to remove some RAM from my system.
View 5 Replies View RelatedI have windows 7 and just cannot find drivers for my Hauppauge 64405 LF REV C1 IMPACTVCB despite visiting the Hauppauge website/s, seems there are only drivers for up to win 2000?? Can you help? I need to transfer old VHS to disk.
View 2 Replies View RelatedI have looked everywhere and can't even find a vista 64 bit driver for this can anyone help? Or can anyone tell me if the AVerMedia AvverTV Bravo Hybred PCI-e tuner is supported or where I can fnd drivers for the same 7100 64.
View 6 Replies View RelatedI bought a brand new 2250 card with remote and the remote does't work. I plugged in the IR sensor to the TV tuner and put new batteries in the remote and the light flashes on the remote when I press a button but the tuner is non responsive to it. I tried using it in both Wintv 7 and Windows Media Center. I've spent about 10 hours doing everything possible and even bought a new cable, but nothing.
When I click a button on the remote should the receiver flash red? because I am not getting any red flashes on the receiver, but when I restart the IR blaster does light up red for about 5 seconds.
IR.exe is running. here is the remote I have: [URL]
i'm looking for the windows 7 driver for hauppauge WinTV 5.9c
View 3 Replies View RelatedIve re-installed windows twice since the pvr stopped working but ever since I just cant get the drivers to install no matter what. I use Windows 7 Home Premium 64bit SP1.
View 9 Replies View Relatedwhy does my shift key stick and caps lock stick
View 3 Replies View RelatedI will probably be getting this motherboard Gigabyte GA-Z68A-D3H-B3 rev. 1.0 Socket 1155 ATX Motherboard Intel Z68 Express Intel Core i7 i5 i3 LGA1155 Processors, Dual DDR3 2133 SATA III SATA 6.0 Gb/s Gigabit LAN SLI CrossFireX USB3.0 HDMI DVI 7.1 Channels Audio-Best Computer Online Store Hous I will be putting in 4 GB of RAM. Do I need to get 2 - 2 GB or can I use 1- 4GB stick? I was thinking if I can used a 4 GB then I can just buy another 4 GB if I decide to go 64 bit.I am shying away from going 64 bit now due to having MS Office 2003.
View 9 Replies View Relatedi am reading a lot a from people not upgrading to a new build because they don't have a spare DVD or a 4 Gb USB stick handy.
Well you don't need all that.
Simply use your favorite mounting tool (i use Magic Disk), mount the image, start the upgrade process.
You might see an message about Magic Disk having to be reinstalled, dont worry, and continue.
You'll see, upgrade works just fine without wasting DVDs or time coping files to a USB drive.
Windows 7 on USB stick, is it possible?
View 2 Replies View RelatedThis is a 1GB thumb drive and its been working just fine. Put some files on it with this machine with the intent of transferring to another machine (which did not come to pass).
View 9 Replies View RelatedI am trying to install a new gig stick of RAM. I took out the old 256 stick but cant start windows with the gig stick in the same slot. I've found some places in the device manager that say RAM and was about to delete them hoping it would let me install the new gig stick but I wanted to post this first to get some help from the pros. Im sure this is a simple problem, so how do I fix it so I can put this gig stick to good use!?
View 7 Replies View Related2.4 GHz single core
1gb ram
256mb video memory
Advisor says not capable of Aero. Stationary computer.
Upgrade to Windows 7 or keep XP?
Is it possible to do an upgrade from 7068 x74 to 7077 x64 from a USB stick?
Do I extract the iso file to the usb stick and then go from there?
My wife keeps most of her data on a USB stick so that she can easily move it around her 3 laptops (in 3 different locations). This morning, the stick was dead. It did not say a piep, no power, nothing. Despite my constant preaching about the importance of backups, she had, of course, not backed it up for a long time.Well, I tried an old trick that may possibly help others. I put it into the fridge for a couple of hours. And low and behold, after that I was able to read the thing and copy all her files. Now she is a happy camper again. So if you have the same problem one day, try the fridge. No guarantee that it will work for you, but it did in this case. I have used the same trick with dead disks with some success.
View 1 Replies View RelatedI recently purchased a Kingston 16GB DataTraveler SE6 USB 2.0 stick. It works without fault in my 2 laptops running Windows 7 (x32), it also works perfectly in my car stereo & Android tablet. It is formatted as FAT.However on my desktop, running Windows 7 (x64) 9 times out of 10 I will get a message saying it needs formatting. 1 out of 10 it will work fine. Even if i try and format it it fails to format, both quick format and regular format.So i've concluded that the USB stick is fine and it must be an issue on my desktop. The desktop is a fairly new build, 3 months old and I'm experiencing no other issues with it. I use a number of other external drives on usb, mini memory sticks via readers and the like without issue. All drivers in Device Manager are reporting fine. i don't unfortunately have another USB stick to test.
View 9 Replies View RelatedI installed one of these recently. Tunes in all SBS channels, but NO C2, C7, C9 or C10 channels.
Anyone got an idea on what might be the problem.
Well, my usb stick is not working. and i've tried it on atleast 3 different computers. and there isn't a problem with the usb port. the thing is the red light doesn't flash when i put my usb stick in the port thingy.
View 1 Replies View RelatedI have a Strong SRT 5410 set top box. I have downloaded the software file to the usb stick. I put it in the back of the stb and the box says NO USB STORAGE.
View 1 Replies View RelatedAfter I forced a shutdown on my computer recently, and rebooted it, all of my folders have gotten all messed up.Before that, folders with lots of pictures used to show icons by default etc., and the file organization was completely different. Now, I can reorganize everything as much as I want, but when I close the folder and open it back up again, nothing has sticked. I might as well not have done it at all. What should I do?I managed to fix it myself by deleting explorer.exe and copying a new one from the backup.The problem seems to persist every time I reboot the computer though. I wonder what's up. For now I'll have to copy and paste the exe every time I boot it up I guess.
View 9 Replies View RelatedI've applied a set of custom cursors that just will not stick after a reboot but will after logging off and logging back in. As you can see by the SS, the Mac scheme cursors are already applied but the actual cursors don't reflect this.
I've applied a set of custom cursors that just will not stick after a reboot but will after logging off and logging back in. As you can see by the SS, the Mac scheme cursors are already applied but the actual cursors don't reflect this.
I know the .ani & .cur files work for me as i had them working perfectly up until i clean installed onto my primary partition on my primary hard drive just the other day. The 'Mac' cursors are in %windir%Cursors btw.
If i select 'Windows Aero (system scheme)' cursor scheme, then re-select the Mac scheme and then Apply, the cursors of course change and stay throughout the session. After a reboot they revert to the default scheme however.
I've tried toggling the "Allow themes to change the mouse pointers" with a reboot.
Saving my current theme, changing the theme, switching back and rebooting.
And finally saving the theme for sharing (.themepack) changing to a different theme, applying the .themepack and rebooting.
All results are the same.
I have a suspicion it's a small reg setting (maybe a toggle setting, (value from 0-1)) but i'm not sure where it'd be and can't find anything relevant in the control panel.
No events are being reported.
I've been running Windows7x64 RTM for about 3 months now. For a couple of days now, whenever i reboot my system it reverts to an old wallpaper i set some time ago. I tried changing the theme & aero border color to see whether it sticks after a reboot & it does!
I checked the group policy settings for any change & didn't find any. I use up2date AV & I'm fairly certain that my system hasn't been compromised. I'm a fairly sophisticated user & find this very annoying.
i have got a Realfine LTD DVB-T Stick, working perfectly on WindowsXP. But Windows 7 doesn't find any drivers. On Windows XP the driver's name wosIntel CE9500 DVB-T Receiver
or CE6230 Standalone Driver (BDA). Both drivers worked.
Someone has a defaultdriver for dvb-t sticks for windows 7 64 bit?
I know it's doable. I did it for 7100. I can't seem to do it for 7127 though.
Basically, I loaded the ISO in PowerISO. Then I told it to burn it to the USB stick. That's it. Now I can't find out how I did it. I tried a search on here and on Google.
Anyone know what I'm talking about?
Never mind. It was UltraISO that let me do this.
Is it possible to turn a usb stick in to ram and then use that stick for a certain program
View 7 Replies View RelatedI've been trying to boot windows from a USB stick for several weeks now and I finally got it to work. There is a lot of information on how to INSTALL windows from a bootable USB stick...WinToFlash is a great program...but little info on installing Win 7 ONTO a USB drive and then booting from it. The methods that I did find didn't seem to work for me. I always got the BSOD...usually the dreaded "Unmountable_boot_volume" 0000000ED error. I used a mixture of the various methods to finally get it to work. First, I created a 16GB VHD on my main HD, an 80GB Intel SSD. I then used GImagex GImageX - AutoItScript to install an image from a .wim I had created from an install of Windows 7 complete with all updates (yes, even service pack 1, that had killed previous attempts at a bootability), Office and some other progams. I then used EasyBCD EasyBCD - Take control of your boot loader | NeoSmart Technologies to add the VHD to my boot list.
Next, I booted to the VHD and installed PWBoot [project] PWBoot <Latest version: 3.0.2> - Project forge - reboot.pro and used the "Patch existing system" option. I then restarted my system, booted normally (not to the VHD), and copied the .vhd file to my freshly formatted 32GB USB stick (Patriot Rage XT). After the VHD was copied, I went back to EasyBCD and used the BCD deployment tab and created bootable external media and installed the Windows 7 bootloader to the MBR. Next, I selected the newly created BCD store using the file menu, then used the Add New Entry to add the VHD using the Disk Image tab under Portable/External Media. To boot, I selected the USB drive in the start up BIOS settings.
Firstly, I have setup the Windows 7 superbar to never group programs and they appear similar to the way they do in Windows XP. I am now trying to figure out a way to get the programs to not "stick" together (e.g. when I launch firefox, all of the firefox icons open up adjacent to one another, instead of at the end of the last application that was opened).
I know this is probably a rare request because everyone seems to love the way the Superbar currently works, but I figure it never hurts to ask.
Also, I would politely request that if you intend to contribute to this thread with a response that is akin to "just get used to the new superbar", than I ask you to kindly ignore this post and continue along with your life.
I bought my FIRST Memory Stick, 16GB, to use wehn I uprgrade from W'7 Trial Version to Retail Version.........the seller said it was compatible with Vista and W'7'; I put the stick into my USB port and it showed it had FAT 32 on it and, NOT knowing for sure, I figured that it probably should have NTFS system on it before I transfer things on to it. I told my W'7 to format it to NTFS and it came back that it could not be done.
Please tell me IF I can use this stick with FAT32 to store data off of my present W'7 OS - to be re-installed onto a NEW install of W'7 in the near future.....OR.....does this stick have to have NTFS on it??
Why is it that some shortcuts that I have on my desktop (shortcuts that I made) will not, while othr will, stick in the taskbar?
View 9 Replies View RelatedBasically, I bought a new USB stick and plugged it in. My computer would search for windows updates, but it would never find the ones required, and the USB wouldn't install. When I unplug the USB and plug it back in again, the computer doesn't even recognize it, and nothing happens. Currently, my computer is not updated, so that's one thing I won't try. I've installed windows 7 updates numerous times in the past, and every time I did, my computer would have problems starting up (i.e. my desktop would be a black screen when it starts and I can't do anything, or the place where I enter my password to log in doesn't load at all).
View 6 Replies View Related