How To Know If Usb Stick Is Working
Jun 14, 2012I have a Strong SRT 5410 set top box. I have downloaded the software file to the usb stick. I put it in the back of the stb and the box says NO USB STORAGE.
View 1 RepliesI have a Strong SRT 5410 set top box. I have downloaded the software file to the usb stick. I put it in the back of the stb and the box says NO USB STORAGE.
View 1 RepliesWell, my usb stick is not working. and i've tried it on atleast 3 different computers. and there isn't a problem with the usb port. the thing is the red light doesn't flash when i put my usb stick in the port thingy.
View 1 Replies View RelatedI have three memory sticks non now work when entered into usb. Have tried webcam and mouse in same usb they each load correctly. When I enter memory stick I hear an audio ping but no loading follows. I have tried checking if driver is up to date etc and all shows correct
View 45 Replies View RelatedI have tried another memory stick and that one isn't working either. However i have tried them on my laptop and they do work. It keeps claiming that the device drivers are not installing successfully, even though My memory stick clearly works. I performed a DriveCure scan, and everything is installed successfully. I have also tried other usb devices, such as my wacom tablet and it works fine. So it only seems to be having problems with External Memory Devices.
View 5 Replies View RelatedI downloaded about 14 CD's into My Docs Music Library and then sent them to a Kingston 2GB Data Traveler 101 USB 2.0 memory stick which plays OK on my computer.However when I insert the stick into a music player...nothing.
View 2 Replies View Relatedi plug my memory stick in the usb n it normaly comes up with a window to open it but now it dont all i get is a red light on the memory stick.
View 1 Replies View RelatedMy 16 GB Centon memory stick I purchased @ Staples in Canada quit working & is not recognized in my computer under search. I have even installed the stick in another port on my computer & it is still not recognized.I have installed other USB sticks in the same port on my computer & they work fine, I can even download onto them.
View 1 Replies View Relatedwhy does my shift key stick and caps lock stick
View 3 Replies View RelatedI will probably be getting this motherboard Gigabyte GA-Z68A-D3H-B3 rev. 1.0 Socket 1155 ATX Motherboard Intel Z68 Express Intel Core i7 i5 i3 LGA1155 Processors, Dual DDR3 2133 SATA III SATA 6.0 Gb/s Gigabit LAN SLI CrossFireX USB3.0 HDMI DVI 7.1 Channels Audio-Best Computer Online Store Hous I will be putting in 4 GB of RAM. Do I need to get 2 - 2 GB or can I use 1- 4GB stick? I was thinking if I can used a 4 GB then I can just buy another 4 GB if I decide to go 64 bit.I am shying away from going 64 bit now due to having MS Office 2003.
View 9 Replies View Relatedi am reading a lot a from people not upgrading to a new build because they don't have a spare DVD or a 4 Gb USB stick handy.
Well you don't need all that.
Simply use your favorite mounting tool (i use Magic Disk), mount the image, start the upgrade process.
You might see an message about Magic Disk having to be reinstalled, dont worry, and continue.
You'll see, upgrade works just fine without wasting DVDs or time coping files to a USB drive.
Windows 7 on USB stick, is it possible?
View 2 Replies View RelatedThis is a 1GB thumb drive and its been working just fine. Put some files on it with this machine with the intent of transferring to another machine (which did not come to pass).
View 9 Replies View RelatedI am trying to install a new gig stick of RAM. I took out the old 256 stick but cant start windows with the gig stick in the same slot. I've found some places in the device manager that say RAM and was about to delete them hoping it would let me install the new gig stick but I wanted to post this first to get some help from the pros. Im sure this is a simple problem, so how do I fix it so I can put this gig stick to good use!?
View 7 Replies View Related2.4 GHz single core
1gb ram
256mb video memory
Advisor says not capable of Aero. Stationary computer.
Upgrade to Windows 7 or keep XP?
Is it possible to do an upgrade from 7068 x74 to 7077 x64 from a USB stick?
Do I extract the iso file to the usb stick and then go from there?
My wife keeps most of her data on a USB stick so that she can easily move it around her 3 laptops (in 3 different locations). This morning, the stick was dead. It did not say a piep, no power, nothing. Despite my constant preaching about the importance of backups, she had, of course, not backed it up for a long time.Well, I tried an old trick that may possibly help others. I put it into the fridge for a couple of hours. And low and behold, after that I was able to read the thing and copy all her files. Now she is a happy camper again. So if you have the same problem one day, try the fridge. No guarantee that it will work for you, but it did in this case. I have used the same trick with dead disks with some success.
View 1 Replies View RelatedI recently purchased a Kingston 16GB DataTraveler SE6 USB 2.0 stick. It works without fault in my 2 laptops running Windows 7 (x32), it also works perfectly in my car stereo & Android tablet. It is formatted as FAT.However on my desktop, running Windows 7 (x64) 9 times out of 10 I will get a message saying it needs formatting. 1 out of 10 it will work fine. Even if i try and format it it fails to format, both quick format and regular format.So i've concluded that the USB stick is fine and it must be an issue on my desktop. The desktop is a fairly new build, 3 months old and I'm experiencing no other issues with it. I use a number of other external drives on usb, mini memory sticks via readers and the like without issue. All drivers in Device Manager are reporting fine. i don't unfortunately have another USB stick to test.
View 9 Replies View RelatedI installed one of these recently. Tunes in all SBS channels, but NO C2, C7, C9 or C10 channels.
Anyone got an idea on what might be the problem.
After I forced a shutdown on my computer recently, and rebooted it, all of my folders have gotten all messed up.Before that, folders with lots of pictures used to show icons by default etc., and the file organization was completely different. Now, I can reorganize everything as much as I want, but when I close the folder and open it back up again, nothing has sticked. I might as well not have done it at all. What should I do?I managed to fix it myself by deleting explorer.exe and copying a new one from the backup.The problem seems to persist every time I reboot the computer though. I wonder what's up. For now I'll have to copy and paste the exe every time I boot it up I guess.
View 9 Replies View RelatedI've applied a set of custom cursors that just will not stick after a reboot but will after logging off and logging back in. As you can see by the SS, the Mac scheme cursors are already applied but the actual cursors don't reflect this.
I've applied a set of custom cursors that just will not stick after a reboot but will after logging off and logging back in. As you can see by the SS, the Mac scheme cursors are already applied but the actual cursors don't reflect this.
I know the .ani & .cur files work for me as i had them working perfectly up until i clean installed onto my primary partition on my primary hard drive just the other day. The 'Mac' cursors are in %windir%Cursors btw.
If i select 'Windows Aero (system scheme)' cursor scheme, then re-select the Mac scheme and then Apply, the cursors of course change and stay throughout the session. After a reboot they revert to the default scheme however.
I've tried toggling the "Allow themes to change the mouse pointers" with a reboot.
Saving my current theme, changing the theme, switching back and rebooting.
And finally saving the theme for sharing (.themepack) changing to a different theme, applying the .themepack and rebooting.
All results are the same.
I have a suspicion it's a small reg setting (maybe a toggle setting, (value from 0-1)) but i'm not sure where it'd be and can't find anything relevant in the control panel.
No events are being reported.
I've been running Windows7x64 RTM for about 3 months now. For a couple of days now, whenever i reboot my system it reverts to an old wallpaper i set some time ago. I tried changing the theme & aero border color to see whether it sticks after a reboot & it does!
I checked the group policy settings for any change & didn't find any. I use up2date AV & I'm fairly certain that my system hasn't been compromised. I'm a fairly sophisticated user & find this very annoying.
i have got a Realfine LTD DVB-T Stick, working perfectly on WindowsXP. But Windows 7 doesn't find any drivers. On Windows XP the driver's name wosIntel CE9500 DVB-T Receiver
or CE6230 Standalone Driver (BDA). Both drivers worked.
Someone has a defaultdriver for dvb-t sticks for windows 7 64 bit?
I know it's doable. I did it for 7100. I can't seem to do it for 7127 though.
Basically, I loaded the ISO in PowerISO. Then I told it to burn it to the USB stick. That's it. Now I can't find out how I did it. I tried a search on here and on Google.
Anyone know what I'm talking about?
Never mind. It was UltraISO that let me do this.
Is it possible to turn a usb stick in to ram and then use that stick for a certain program
View 7 Replies View RelatedI've been trying to boot windows from a USB stick for several weeks now and I finally got it to work. There is a lot of information on how to INSTALL windows from a bootable USB stick...WinToFlash is a great program...but little info on installing Win 7 ONTO a USB drive and then booting from it. The methods that I did find didn't seem to work for me. I always got the BSOD...usually the dreaded "Unmountable_boot_volume" 0000000ED error. I used a mixture of the various methods to finally get it to work. First, I created a 16GB VHD on my main HD, an 80GB Intel SSD. I then used GImagex GImageX - AutoItScript to install an image from a .wim I had created from an install of Windows 7 complete with all updates (yes, even service pack 1, that had killed previous attempts at a bootability), Office and some other progams. I then used EasyBCD EasyBCD - Take control of your boot loader | NeoSmart Technologies to add the VHD to my boot list.
Next, I booted to the VHD and installed PWBoot [project] PWBoot <Latest version: 3.0.2> - Project forge - reboot.pro and used the "Patch existing system" option. I then restarted my system, booted normally (not to the VHD), and copied the .vhd file to my freshly formatted 32GB USB stick (Patriot Rage XT). After the VHD was copied, I went back to EasyBCD and used the BCD deployment tab and created bootable external media and installed the Windows 7 bootloader to the MBR. Next, I selected the newly created BCD store using the file menu, then used the Add New Entry to add the VHD using the Disk Image tab under Portable/External Media. To boot, I selected the USB drive in the start up BIOS settings.
Firstly, I have setup the Windows 7 superbar to never group programs and they appear similar to the way they do in Windows XP. I am now trying to figure out a way to get the programs to not "stick" together (e.g. when I launch firefox, all of the firefox icons open up adjacent to one another, instead of at the end of the last application that was opened).
I know this is probably a rare request because everyone seems to love the way the Superbar currently works, but I figure it never hurts to ask.
Also, I would politely request that if you intend to contribute to this thread with a response that is akin to "just get used to the new superbar", than I ask you to kindly ignore this post and continue along with your life.
I bought my FIRST Memory Stick, 16GB, to use wehn I uprgrade from W'7 Trial Version to Retail Version.........the seller said it was compatible with Vista and W'7'; I put the stick into my USB port and it showed it had FAT 32 on it and, NOT knowing for sure, I figured that it probably should have NTFS system on it before I transfer things on to it. I told my W'7 to format it to NTFS and it came back that it could not be done.
Please tell me IF I can use this stick with FAT32 to store data off of my present W'7 OS - to be re-installed onto a NEW install of W'7 in the near future.....OR.....does this stick have to have NTFS on it??
Why is it that some shortcuts that I have on my desktop (shortcuts that I made) will not, while othr will, stick in the taskbar?
View 9 Replies View RelatedBasically, I bought a new USB stick and plugged it in. My computer would search for windows updates, but it would never find the ones required, and the USB wouldn't install. When I unplug the USB and plug it back in again, the computer doesn't even recognize it, and nothing happens. Currently, my computer is not updated, so that's one thing I won't try. I've installed windows 7 updates numerous times in the past, and every time I did, my computer would have problems starting up (i.e. my desktop would be a black screen when it starts and I can't do anything, or the place where I enter my password to log in doesn't load at all).
View 6 Replies View Relatedgot problems with my USB sticks. I have 2 Platinum 16gb sticks. I run a dual boot system with XP an Windows 7. If I plug the sticks when I'm running seven, seven says the volumes have to be formated. When I plug them while I'm running XP everything is fine. No problems...
Same system. Different OS...
The sticks are new. I tried to format them, but after I plug them into my Pioneer CDJs. The same behaviour appears.
I've been carrying the same one, a Kingston Data Traveler in a tiny ziploc in my pocket for years.Write the Windows 7 ISO to stick using UltraISO trial version: on File tab open ISO, on Bootable tab Write Image, then Format, Write.The installer files will be in the root but you can keep them in a folder when not installing so they don't accidentally get deleted.so that I add XP, Vista, various Office installers, Works, Adobe, Flash, Java, CCleaner, Auslogics Defraggers, PowerISO, Acronis boot disk, PW, memtest86, GWScan, etc.Instant tool kit for the pocket.
View 1 Replies View Related