I was wondering, if I got a new 500gb internal drive cause my old one is bad, would I be able to transfer everything (Including my seven install) onto the new drive? and if yes, how would I go about doing so?
View 6 RepliesIn my 8 years of serious computing, I have never had to replace a HDD but I am going to have to do it for the first time sometime earlier next week when the new one along with the recovery media from Acer gets here.I have managed to locate a service manual for my Acer Notebook model series here.The new HDD is a WD500BPKT @ 7200RPM The old HDD is a WD3200BEVT-22ZCT0 @ 5400RPM Will I need to install new drivers (SCSI etc.) or anything else, or is it a simple plug-and-play operation once the recovery media is booted off of the disks and installed?I suspect I will need to change the BIOS Boot Order so that the opticle drive is first rather than IDE 0 to get the disks to come up, so that's a non-issue.
View 9 Replies View RelatedI just need your expert opinion on this matter before I call Dell back. Apparently my Hard drive went out on my new computer (6 mos.old) and, I guess a possible Motherboard problem as well, because the Dell tech told me they were sending a Hard drive & a motherboard to a service tech near me. Anyway, the tech came out with only the Hard drive. When I ask him where the Motherboard was, he didn't know anything about a motherboard.Dell did not send him one. He went ahead and installed the Hard drive & every thing seems to be working fine now for 4 days so far. My concern is, do you think my computer would still work ok if it has a faulty motherboard too? My warranty will be up in about 6 months & just want to make sure. I have a message to call Dell back & let them know how my service call went, but Just wanted your opinion before I do. Should I insist on a new motherboard?
View 6 Replies View Relatedalright, I'm posting on behalf of a friend(doing chat on facebook..), who is trying to replace the harddrive on a windows 7 laptop.now.. installation of the new drive did not go to plan, so he tried to put the old one in, and the computer apparently took this as cause to commit seppeku if you will.we have tried everything, up to and including testing for a bad mobo, which I suspect it is.all he's getting is a power light, not even the screen's backlight is coming up.
View 9 Replies View RelatedMy Dell 1525 Windows 7 laptop had begun to experience more and more frequent hard drive errors. So, in an effort to fend off total disaster, I purchased a new hard drive. The new drive was slightly larger than the old one (250GB vs 160GB). With a week old backup in hand, I used Acronis to do a disk CLONE to the new drive in an external enclosure. I was able to do it without any apparent drive errors. I then swapped drive for drive and rebooted. My most frequent apps worked fine, network access was fine, etc. Then I went to do a Windows Update - not fine. The little shield in the upper left corner of the box was red and, when I clicked on the "Check for Updates" box, it replied Windows Update cannot check for updates because the service is not running. You may need to restart your computer." I went to Services, started the service, marked it Automatic, and tried again - no joy. So, as it suggested, I rebooted. No joy again. After trying a couple of different backup versions with the same result. I went back to square one and used the original Windows 7 install disk. The install went fine and I was able to use Windows Update successfully. I hoped that having verified that a vanilla Windows 7 worked, I might be lucky enough to just be able to restore my latest backup. Wrong. The system appears to work fine with the only KNOWN problem being Update - there may be other problems, as yet unknown. Differences I am aware of: new hardware partitions proportionally larger than the previous disk.
View 3 Replies View Relatedlast weekend I was trying to recover the contents of a failed hard drive to a new hard drive using Windows System Repair Disc and Windows System Image.was able to successfully restore the image. Everything is working fine, but here is my question - the original hard drive was 750 GB and the new one is 1TB. After doing the system restore the hard drive properties show the identical size of the failed drive - not the new larger size. The BIOS shows the correct size. Does the Windows System Image set up the new hard drive exactly as the old one, so it will only access the original 750 GB
View 6 Replies View RelatedI have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
View 3 Replies View RelatedSo, I have a i7 2600K system with a solid state disk as the boot drive, and an older (c2008) Samsung Spinpoint F3 500GB drive as the data drive for programs (that I deem as not worthy of the quick load times). The hard drive has given me some errors over time, and I bought a hard disk to replace it (a Hitachi 1TB). The issue I'm having is that the fact that Windows 7 puts a small (100MB) partition on the F3, and for some reason, even though I'm running Acronis 2012, it doesn't seem to be able to clone the F3 over to the Hitachi. I've also tried Drive XML, and for my 2 hour wait, I only managed to acquire a boot error. Thankfully, I've not done anything rash to destroy the data on the F3, but given the fact that I've seen corrupted files in Steam from that drive, I'm not will to trust it long term with my data. I really need to get the data onto that Hitachi, though... Anyone have any advice for upgrading the HDD in a SSD/HDD system? I don't really feel like it should be so hard, especially if I've bought Acronis True Image, but maybe they haven't designed their product to handle this scenario quite yet?
View 9 Replies View RelatedI have a HP Touchsmart IQ500. Turning my computer PC on today, all I got was a blue HP invent screen with setup, boot menu, system recovery, and system diagnosis, and I could not get past it. I entered the BIOS and figured out that the hard drive was listed as "not installed." Pretty sure that is the main problem.I tried a system restore (with the Windows 7 install disc), but I guess the computer couldn't read the hard drive enough to enter safe mode (I tried restarting and F8ing several times). I put in an external hard drive, and the BIOS read it; however, windows does not allow you to partition an OS on a hard drive.
View 2 Replies View RelatedI have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable
View 3 Replies View RelatedMe and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?
View 6 Replies View RelatedI have a virus infected sata hard drive with windows 7 on it. It has the win 7 anti virus 2012 on it, and it's a cybercriminal virus. I have lots of files I want to transfer to the new sata drive. I already have windows 7 installed on the new drive. How do I get the files from the bad drive to the new one?
View 4 Replies View RelatedI have a USB Webcam 6.1.7601.17514 from Microsoft installed on a Fujitsu Laptop (Windows 7 ) and I want to copy and install it on another Fujitsu laptop (Windows 7).The other laptop the camera is not working and there is no webcam driver installed.
View 1 Replies View RelatedI have Vista installed on my Hard Drive, 250 GB.
But i recently purchased a 2nd Hard Drive, 500 GB, and i want to install Windows 7 on it.
Is that possible, to have both separately?
make a dualboot comp by adding windows XP to a new partition. I created the new partition with 20gb. (From the 500 of my actual harddrive)But before I actually installed on that, I got distracted with a second harddrive that my dad got(for no reason). It had a full copy of Windows XP backed up on it from another computer, so I figured I would just use that for the dualboot. I plugged it in (wired the same way as my old harddrive, but different data slot), restarted, checked the harddrive in explorer - all the data was there / reading correctly / etc, and I used 'easyBCD' to add the new harddrive to the boot list.(Which, of course, crashes if I try to start it. I just wanted to see what it would do). For a reason I can't remember, I unplugged the second harddrive for a bit, started the computer on accident (I don't know if anything loaded before I shut it off), and then when I plugged it back in.Windows 7 would not launch. It goes to a DOS-like window, except it's just a flashing _ and it never does anything even after a few minutes. XP didn't work still.. so I decided to reinstall XP (as I couldn't tell which harddrive was which on the list, I unplugged the main harddrive while installing onto the new).. and when I did this.. it formatted and installed fully... then restarted.. then restarted.. and restarted.. and just kept restarting, never showing any thing past the manufacturer logo/BIOS load-button-message-thing. So, I then try to use my 3-disk Windows7Recovery disk(burned myself with a program apparently included by the manufacturer.) It installed fully, appearing to work.. but when I launched it, it said "Invalid Partition Table" and wouldn't boot past that. When I insert my driver installer disk, it gives me a basic DOS window thing. dir A: shows the files in the disk. dir B: for some reason shows the same. C: says "Error reading from drive C: DOS area: general failure". All other letter:'s just say "invalid drive". (I'm doing this with both harddrives in.) I attempted connecting the harddrives to an old computer, but it gave an error for both. (It detected the harddrives, but said it had an error reading from it. Windows Explorer asked me to format it... {i'm willing to format one of the drives if anybody thinks it will help, but the old harddrive has data I'd prefer not to lose.} ) Looking on google, I saw several problems that all have similar problems (less overdescripptive than I am though) but none of the fixes suggested worked for me. Also - as I have two different with different errors, I only need to make one of them work.)Also - my other available computer has a CD burner / floppy drive if either are required. I also have several USB's. The computer can boot from USB's and CD's (tested), and I could easily take the floppy thingy and connect it to the computer.also - this computer is probably still under warranty unless unscrewing the hard drive voids it. .. does that count as modification of the computer?
View 5 Replies View RelatedI cannot find my windows 7 dvd, I am thinking that one of my little ones was playing in the office and threw it away or hid it somewhere. . I have the product key but no dvd. Is there a way get a replacement dvd and just use the key that i have. I really dont want to spend the $300 that i spent for the full ultimate edition.
View 5 Replies View RelatedMy HP p6710f came with �PDF Complete� which lets you save a single page of a PDF as its own PDF file. This option comes up when you right click on a PDF and choose Print & then the printer, which is PDF Complete.However I did not know this was a trial program & mine just ran out. Every month I generate a PDF with several pages, but each page is for a different person. I found it convenient to print or save each person�s page separately in order to email to them.
I need a replacement for PDF Complete & was hoping to find something which has the same functions. I have seem some free programs for creating PDF files but am unable to figure out if they can save individual pages as new PDFs.
I have an HP 6000 officejet printer and would like to know how I can tell when the cartridge needs replacement.There used to be some kind of chart to measure ink levels?
View 9 Replies View Relatedwe are using Netmeeting's Remote Desktop Sharing feature to assist us when helping users on our network. It has proven to be a very useful tool that our IT department uses on an almost daily basis. What I like about Netmeeting is it is very easy to set up RDS when I get a new Windows XP (we haven't made the move to Vista) workstation ready to replace one on the "shop floor". Now I'm testing Windows 7 and I was wondering what the concensus (if any) on what to use when the move to Windows 7 is made, as I don't think MS is going to let us slide anymore with XP, for RDS in a mixed environment (XP, Windows 7, Server 2003)?
View 9 Replies View RelatedI use Chameleon Clock in WinXP, but apparently it isn't available in 64-bit. Anyone know of a good replacement for Windows 7?
View 7 Replies View RelatedWhat's the replacement for Helpctr.exe in Windows 7?
View 1 Replies View RelatedI RMA'd the motherboard of a new system I am building because one of its' two banks of DIMM slots was defective.Is it necessary for me to re-install of the OS once I have the same replacement motherboard installed? If it is necessary for me to re-install, am I going to have issues with my licensed copy of Windows 7, since in theory it is being installed on another system?BTW, the OS installed fine and the system appears to be stable running off 16GB of memory. Nevertheless, I returned the mobo because I couldn't get my system it to recognize the other 16GB of memory installed. I am a PC convert after having spent the last 15 years working with Macs so my knowledge of PC OSs is not terribly sophisticated. This is my second PC build (the first being a hybrid with a mac OS).Delvin P. Blanders
[code]...
I have a USB external hard drive that I keep all my documents etc on (had it for years)I upgraded from Vista Home to & Home Premium then had to upgrade recently to Professional to run my Sage. Through all these upgrades my ext. drive ran fine. Occasionally the drvie letter would change if I had something else plugged into the USB, this was always easily corected in disk management by changing the drive path.The connection on the case packed up so I had to get the drive put into a new case, now when I plug it in the drive is assigned G instead of F, I tried to change the drive letter allocation in Disk Management but it won't let me as the program still thinks I have a second ext. hard drive which is labelled F. I suspect this has happened because when the usb connection broke the drive was disconnected suddenly instead of a proper eject.How do I get Disk Management to remove the inactive drive - i can't find any obvious way - eject, delete etc are all missing when I click on tools or tasks.
View 2 Replies View RelatedI installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive. I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.
There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked. Can someone explain how to do this, please? I'm not completely computer illiterate, but I'm not familiar with partitioning disks. It was just the one time with Ubuntu.
My laptop is Acer with Windows 7 home premium 64 bit OS. It contain only 1 single partition disk that is c drive only.Recently, i accidentally convert the c drive which contain OS into dynamic disk.After i restart the laptop, it shows the following: BootMgr is missing Please press Alt, Ctrl +del to restart Now, i not able to enter the window. I am so worry because my important data is kept inside the hard disk, and i still not yet do any back up copy on it.I searching on this forum and learnt that i need a window 7 installation disk to repair it, but my problem is the computer dealer not give me any windows 7 installation disk when i baught this laptop as their said all the driver and windows program already kept in side the harddisk.I tried to remove the laptop hardisk which is a 500GB toshiba SATA hardisk. Then, i use the other laptop with Windows XP professional with the intention to copy yhe file inside the toshiba hard disk.However, after plugged in the hard disk to the other laptop, under the disk management, it shows that the toshiba disk as : dynamic disk, unreadable.i having problem to backup the data inside the toshiba hard disk.....
View 8 Replies View RelatedI've been noticing after re-installing Win 7 that I get random floppy drive seeks and the hard drive light flashes like crazy and then everything is fine again.I have Clamwin AV,Spyware Blaster and Spybot S&D installed,but that's it,no Windows Defender or Essentials AV.Any ideas what causes this? It's a minor annoyance,but I just want to make sure it's not damaging anything.Also would Readyboost help me? I've got 2 gigs dual channel PC3200 ram(or I could go with 2.5 gig single channel PC2700)and a P4 at 3 gig until I can afford to upgrade my comp.This is my first post in quite awhile so I hope this is in the right place
View 7 Replies View RelatedI installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive.
I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.
There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked.
Low disk space, Can transfer data on D drive to an external hard drive
View 5 Replies View RelatedAlmost new Inspiron 5720- Home Premium. i7 quad.
After installing three or four updates yesterday my laptop now clicks the optical drive a couple of times as I start any video or music file on the hard drive. Not a fatal flaw, but, very irritating just the same. Did a system restore to the morning before the updates- same behavior remains. Installed updates again, removed them one at a time, same thing. Restored to over a week ago, same behavior! What is up with this clicking. The files start and play immediately, no problem there, I'd just like the optical drive to mind it's own business. Movie discs play fine, burns stuff fine, just go to your corner and SHUT UP!
I am considering XPS 17 laptop but it has touch screen. Are there any problems using mouse as a replacement. I do not hanker touch screen.
View 2 Replies View RelatedHD crashed on Dell Inspiron 580 desktop. Replaced with a new one. No back-ups discs available. Installed Windows 7 Starter from Notebook backup disc to boot it up.
Now it will not connect to the internet. Message is that it can't find a network adapter.
Is it because of the Starter version of Windows? Will installing a new copy of Home Premium fix it