I run my computer off an SSD.But I have 2 Samsung 2TB drives for storage.I regularly have to transfer filed from one 2TB drive to the other. Until not it has always been a fairly speedy process.I am transferring a large file (5GBish) and for the first 5/10 seconds it transfers between 120 MB/sec - 150 MB/sec, but after that it suddenly starts slowing down, until about a minute later it's sitting at around 20 MB/sec.
View 4 RepliesMy hard drive space is suddenly decreasing rapidly (30MB every few seconds), and I don't know what's causing it. It was 14 GB a couple of days ago. I've restarted my computer, and I've deleted some data, so it's just under 1 GB now (it got to a critical point earlier where it was at 96 KB).My firewall was also oddly deactivated when I restarted my computer, but I've reactivated it now. I'm running a virus scan with AVG at the moment, but I have no idea what this could be.
View 2 Replies View RelatedI have just put together a new PC and have 2 Samsung Spinpoint (sata300) hard disks installed. I have had a look at Windows 7 performance utility and although all the other components rate very well, the disk data transfer rate is the same as my previous PC. Very disappointing to say the least.
I have an Asus P7P55 motherboard with 4Go RAM. Am I to believe this low rating (5.9) or is it not very reliable? If it is, do I need to tweak something?
i seriously cannot understand why the c drive space keeps on decreasing, i have a windows 7 64 bit installed on my laptop and the only major software package installed on it is the adobe cs5 master collection, i use ccleaner and disk clean up regularly and also clean the adobe cache files, but still the space is decreasing just a few weeks back the disk had 77 gb of free space and now its down to 70 -my surfing is a lot and i use any video converter and Internet downloader as well due to my multimedia studies, i cannot understand why is the space decreasing so despite maintenance can anyone help me please
View 7 Replies View RelatedWould formating my hardrive and reinstalling Windows 7 speed up my laptop?Which way will be the best to do it? Do i create a partition not to lose all graphix and sounds software?
View 7 Replies View RelatedI have recently had to format my hard drive and re-install windows. I have also had to replace the motherboard, CPU and power supply. I borrowed a 1.5 TB Freecom firewire external hard drive from a friend to back-up important data before the format, but the transfer speed is uselessly slow now that I am attempting to put the data back on the drive.
I have tried:
- updating the drivers for the firewire card
- switching to 1394 OHCI Compliant Host Controller (legacy) in the device manager
- Optimizing the drive for 'better performance' as opposed to 'speedy removal' in the drive's properties.
As things stand at the moment, I am getting about 400 kb/ps transfer speed from the external to my on-board drive. As you can imagine, this is virtually useless to me, considering I have hundreds of gigabytes worth of data to transfer.
How to play GTA 4 rapidly
View 1 Replies View Relatedtoday i was watching some video on Internet. suddenly, the computer restarts itself. however, it turns on and turn off nonstop. the window does not even start yet, just about 2 3 seconds then it turns off.
View 11 Replies View RelatedI have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
View 3 Replies View RelatedThe cursor pulses rapidly with the blue circle behind it.Especially bad in Word documents.
View 1 Replies View Relatedi have a htpc at home, hooked up to a 1080p tv at 1920x1080. because i sit 10 feet from my tv, i needed to increase the text dpi to 150% so i can see what's on the screen. however, i found that increasing the dpi is just simply reducing the screen resolution to 1280x720, and then enlarged to 1920x1080 so everything is bigger. i know this is true because many program state that as my resolution. full screen Internet videos automatically go to 720p instead of 1080p (unless i disable dpi scaling for chrome, which makes my text small again). there is a dramatic decrease in detail (1080 -> 720) when watching blu-rays with 150% dpi because the resolution is lowered by dpi scaling. pictures in browsers are enlarged and not shown at the original resolution.dpi scaling is pointless if it just reduces resolution. is there a fix for this, or is dpi scaling just this poorly implemented in windows 7?
View 2 Replies View RelatedI am wondering why my Harddisk space on windows 7 keeps decreasing. From 30 Gb of free space to 13Gb. As i had 2 partition. All my downloads are in my second partition while i only store applications like games in the first. However i did not download anything but my free space in the first partition kept decreasing. I tried turning off system restore but only about 1Gb was restored. Is this some system settings with windows 7?
View 2 Replies View RelatedSo, I have a i7 2600K system with a solid state disk as the boot drive, and an older (c2008) Samsung Spinpoint F3 500GB drive as the data drive for programs (that I deem as not worthy of the quick load times). The hard drive has given me some errors over time, and I bought a hard disk to replace it (a Hitachi 1TB). The issue I'm having is that the fact that Windows 7 puts a small (100MB) partition on the F3, and for some reason, even though I'm running Acronis 2012, it doesn't seem to be able to clone the F3 over to the Hitachi. I've also tried Drive XML, and for my 2 hour wait, I only managed to acquire a boot error. Thankfully, I've not done anything rash to destroy the data on the F3, but given the fact that I've seen corrupted files in Steam from that drive, I'm not will to trust it long term with my data. I really need to get the data onto that Hitachi, though... Anyone have any advice for upgrading the HDD in a SSD/HDD system? I don't really feel like it should be so hard, especially if I've bought Acronis True Image, but maybe they haven't designed their product to handle this scenario quite yet?
View 9 Replies View RelatedMy hard disk space is decreasing rapidly, about 150mb/sec. When I restart my PC it resets back to normal and starts decreasing again. Once it reaches zero, I can work any programs and browse the internet. It will happen in about 10-15 minutes again, maybe less. What do I do?
View 17 Replies View RelatedI've searched everywhere, including (when you click F1) in windows 7. I need a keyboard shortcut for increasing and decreasing volume, and I don't mean when playing a video or something, I mean the "general" one. (Not in Media Player)
View 5 Replies View RelatedAfter installing a skin pack from called simplfy,I used a restore point that i created before installing the skin pack ill call it restore point A. i installed the skin pack again and then used system restore to restore to the same point (restore point A) without undoing the last restore which was restore point A. Earlier this morning I tried to save a text file and it said disk space was low.I know that wasn't correct a text file shouldnt exceed 14.75gb.So I checked the disk and it said 0 kb free. Restarted Computer opened defraggler (I didnt do anything with defragler I only used it to look at the graph) and ccleaner (I ran the file cleaner and the registry cleaner which cleared only 299mb) and I noticed that the space was returning back to normal at about 150 mb/sec. After about 6 hours the problem returned and now I'm posting this.
View 9 Replies View RelatedI have a HP Touchsmart IQ500. Turning my computer PC on today, all I got was a blue HP invent screen with setup, boot menu, system recovery, and system diagnosis, and I could not get past it. I entered the BIOS and figured out that the hard drive was listed as "not installed." Pretty sure that is the main problem.I tried a system restore (with the Windows 7 install disc), but I guess the computer couldn't read the hard drive enough to enter safe mode (I tried restarting and F8ing several times). I put in an external hard drive, and the BIOS read it; however, windows does not allow you to partition an OS on a hard drive.
View 2 Replies View RelatedI have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable
View 3 Replies View RelatedMe and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?
View 6 Replies View RelatedI have a virus infected sata hard drive with windows 7 on it. It has the win 7 anti virus 2012 on it, and it's a cybercriminal virus. I have lots of files I want to transfer to the new sata drive. I already have windows 7 installed on the new drive. How do I get the files from the bad drive to the new one?
View 4 Replies View RelatedI have a USB Webcam 6.1.7601.17514 from Microsoft installed on a Fujitsu Laptop (Windows 7 ) and I want to copy and install it on another Fujitsu laptop (Windows 7).The other laptop the camera is not working and there is no webcam driver installed.
View 1 Replies View Relatedhow do I speed up boot time using drive?
View 4 Replies View RelatedI have a problem with the speed of my mapped network drive. At first al is wel and file loading is as fast as to be expected. But after some time the transfer speed drops dramaticaly and it becomes very slow. I tested it primaraly with loading of image sequences, but it affects all file loading the same. If I logoff and login to windows again the speed is back to its full potential. And then after some time again it drops. I have seached the internet for similar ploblems, but could not find this kind of problem, only the dropping of the connection entirely, but thats not the case here.
All user PC's that have the network drive mapped are windows7 Pro PC's with gigabit lan. The server PC is also windows7 with quad gigabit lan, teamed to 1 connection. A 4 ssd raid setup via a MSI megaRaid controller provides the drive for mapping. The switch is a HP proCurve 1810G-24. Jumbo frames is disabled on all devices. Because i have no domain, the password protection for file sharing on the server is disabled, so al user PC's can connect to the mapped network drive with their own username.
Is there some sort of idle timer on the mapped network drive that could be responsible or something?
I have Vista installed on my Hard Drive, 250 GB.
But i recently purchased a 2nd Hard Drive, 500 GB, and i want to install Windows 7 on it.
Is that possible, to have both separately?
I just want to be able to increase the speed of my fans beyond their spec, and have complete manual control over their RPMs without a care about the temps. I have a liquid cooling setup and the fans on my radiator as they are right now simply aren't cutting it. I have them hooked up to the motherboard in hopes of finding something to just boost their speed via software, but SpeedFan is the only thing I could find and it simply sucks for that purpose.
View 5 Replies View Relatedmake a dualboot comp by adding windows XP to a new partition. I created the new partition with 20gb. (From the 500 of my actual harddrive)But before I actually installed on that, I got distracted with a second harddrive that my dad got(for no reason). It had a full copy of Windows XP backed up on it from another computer, so I figured I would just use that for the dualboot. I plugged it in (wired the same way as my old harddrive, but different data slot), restarted, checked the harddrive in explorer - all the data was there / reading correctly / etc, and I used 'easyBCD' to add the new harddrive to the boot list.(Which, of course, crashes if I try to start it. I just wanted to see what it would do). For a reason I can't remember, I unplugged the second harddrive for a bit, started the computer on accident (I don't know if anything loaded before I shut it off), and then when I plugged it back in.Windows 7 would not launch. It goes to a DOS-like window, except it's just a flashing _ and it never does anything even after a few minutes. XP didn't work still.. so I decided to reinstall XP (as I couldn't tell which harddrive was which on the list, I unplugged the main harddrive while installing onto the new).. and when I did this.. it formatted and installed fully... then restarted.. then restarted.. and restarted.. and just kept restarting, never showing any thing past the manufacturer logo/BIOS load-button-message-thing. So, I then try to use my 3-disk Windows7Recovery disk(burned myself with a program apparently included by the manufacturer.) It installed fully, appearing to work.. but when I launched it, it said "Invalid Partition Table" and wouldn't boot past that. When I insert my driver installer disk, it gives me a basic DOS window thing. dir A: shows the files in the disk. dir B: for some reason shows the same. C: says "Error reading from drive C: DOS area: general failure". All other letter:'s just say "invalid drive". (I'm doing this with both harddrives in.) I attempted connecting the harddrives to an old computer, but it gave an error for both. (It detected the harddrives, but said it had an error reading from it. Windows Explorer asked me to format it... {i'm willing to format one of the drives if anybody thinks it will help, but the old harddrive has data I'd prefer not to lose.} ) Looking on google, I saw several problems that all have similar problems (less overdescripptive than I am though) but none of the fixes suggested worked for me. Also - as I have two different with different errors, I only need to make one of them work.)Also - my other available computer has a CD burner / floppy drive if either are required. I also have several USB's. The computer can boot from USB's and CD's (tested), and I could easily take the floppy thingy and connect it to the computer.also - this computer is probably still under warranty unless unscrewing the hard drive voids it. .. does that count as modification of the computer?
View 5 Replies View RelatedHow To Speed Up Windows 7 - Speed Tweaks by doing the following:-
Disable indexing
Disable defragmentation
Disable Write Caching
Configure Superfetch
Disable the Page File
Disable System Restore
Disable Hibernation
I have a USB external hard drive that I keep all my documents etc on (had it for years)I upgraded from Vista Home to & Home Premium then had to upgrade recently to Professional to run my Sage. Through all these upgrades my ext. drive ran fine. Occasionally the drvie letter would change if I had something else plugged into the USB, this was always easily corected in disk management by changing the drive path.The connection on the case packed up so I had to get the drive put into a new case, now when I plug it in the drive is assigned G instead of F, I tried to change the drive letter allocation in Disk Management but it won't let me as the program still thinks I have a second ext. hard drive which is labelled F. I suspect this has happened because when the usb connection broke the drive was disconnected suddenly instead of a proper eject.How do I get Disk Management to remove the inactive drive - i can't find any obvious way - eject, delete etc are all missing when I click on tools or tasks.
View 2 Replies View RelatedI installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive. I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.
There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked. Can someone explain how to do this, please? I'm not completely computer illiterate, but I'm not familiar with partitioning disks. It was just the one time with Ubuntu.
My laptop is Acer with Windows 7 home premium 64 bit OS. It contain only 1 single partition disk that is c drive only.Recently, i accidentally convert the c drive which contain OS into dynamic disk.After i restart the laptop, it shows the following: BootMgr is missing Please press Alt, Ctrl +del to restart Now, i not able to enter the window. I am so worry because my important data is kept inside the hard disk, and i still not yet do any back up copy on it.I searching on this forum and learnt that i need a window 7 installation disk to repair it, but my problem is the computer dealer not give me any windows 7 installation disk when i baught this laptop as their said all the driver and windows program already kept in side the harddisk.I tried to remove the laptop hardisk which is a 500GB toshiba SATA hardisk. Then, i use the other laptop with Windows XP professional with the intention to copy yhe file inside the toshiba hard disk.However, after plugged in the hard disk to the other laptop, under the disk management, it shows that the toshiba disk as : dynamic disk, unreadable.i having problem to backup the data inside the toshiba hard disk.....
View 8 Replies View RelatedI've been noticing after re-installing Win 7 that I get random floppy drive seeks and the hard drive light flashes like crazy and then everything is fine again.I have Clamwin AV,Spyware Blaster and Spybot S&D installed,but that's it,no Windows Defender or Essentials AV.Any ideas what causes this? It's a minor annoyance,but I just want to make sure it's not damaging anything.Also would Readyboost help me? I've got 2 gigs dual channel PC3200 ram(or I could go with 2.5 gig single channel PC2700)and a P4 at 3 gig until I can afford to upgrade my comp.This is my first post in quite awhile so I hope this is in the right place
View 7 Replies View Related