Diskpart Lists No Volumes Other Than DVD-ROM Drive
Mar 18, 2012
I just put in a new second hard drive, but my machine won't start into windows anymore (win7 64-bit sp1). I just have a black screen after boot with a blinking cursor top left corner and the HD led on the pc is on permanently. So I decided to pop in the installation dvd and was able to get into recovery environment. Launched the command window and diskpart, but DP lists no drives or volumes.
When I take the new disk out, the system boots up normally. I can see where this is going, so is there anyway to use the recovery environment to scan the drive for errors? Chkdsk doesn't work cos no drives are present, supposedly. Can I manually mount a drive? Unfortunately I don't have an external hdd dock to stick the drive in.
I have an HP xw8600 on which I am trying to install and format raid 0. My boot drive and OS use the on board controller. This raid is on a 3rd party card (3 Ware 9550SXU-12). I am using this board for its supposed speed over my on board LSI controller, which is capable of raid with only 2 ports. I have used the Bios level utility from 3 Ware to set up the array of 2 Samsung 103F3 1 TB drives in raid 0. The 3 Ware utility says these are now 'exportable' meaning available to Win for formatting.I go to Diskpart, making sure I am an administrator, and can view, select and partition the drives. When I go to format however I get and error message that the format has failed. I checked the system event log and it says: ChipStatus=16807000 (PCI parity error) The event log mentions that it was the 3 Ware that generated it. The drivers for this board are loaded and under device manager it functions normally. I have seen some posts that say this might be a driver error. I have the latest 64 bit driver for this board.
I just got my laptop back from Acer and they had given me a new hard drive. I restored a disk image backup that I had made from Acronis True Image. The backup seemed a little strange going in, but none the less it worked anyway. I then went to Disk Management to look at the setup and noticed that my primary partition is now listed as a Logical. I'm posting a screen shot of the partions and someone tell me if that looks right to them and if not how do I get my C drive back to Primary. As I said it boots ok but when I did the recovery with Acronis it didn't seem to go as smoothly as it should have.
I've been reading up on dynamic volumes, and while they are interesting, I wonder if they are actually used in the real world, and if so, more by enterprises than individuals?
know of a way to tweak jump lists, so that instead of disabling them system wide, you can just disable them for specific programs?For example, I would like to turn off jump lists for IE and Notepad, but leave the jump lists for RDC and VPC enabled.
I have Win 7 64 and I have created a vbscript file to launch Windows Media Centre - the script tweaks the registry settings for WMC window size and position (so it always opens in the same position and size on my second montor) before shelling to WMC (which also includes command line swtches to open in the TV Guide).The trouble is that I have created a shortcut to the vbscript file and put it into the start menu - but when I right click on it, it doesn't give me the option to pin it to the task bar. If, however, I edit target for the original WMC shortcut to point to the vbscript then I can pin it. Interestingly, when I do it this way, the Jump List on the pinned shortcut on the taskbar still retains the WMC Jump List which is great(although the Jump List doesn't appear to work on the Start Menu shortcut).So the question is - is there any detailed information that someone can point me at to help me understand how the shortcuts, pinning and jump lists work? Specific questions are:- How does Win 7 tell the difference between the short cut I created for the vbscript file and the "standard" shortcut for WMC?- Why does the pin-to option not appear on the vbscript shortcut?- Can I programmatically, or manually, add shortcuts to the "pinned" area on the task bar?- What controls the Jump List and can it be customised?
I have an external 2Tb hard disk that's gone bad. It is under warranty so I can return it back. I was trying to wipe it clean and erroneously ran "diskpart clean" instead of "diskpart clean all". Now that all partitions are all gone, my laptop won't recognize it anymore. It shows up as "unknown", "not initiated" & "unallocated" on disk management. Trying to initialize the disk gives the error "the device cannot find the sector requested". There's no drive letter. Diskpart doesn't list its volume but lists the disk. It is listed under disk drives on device manager and device status says "This device is working properly". Is there anyway to run "diskpart clean all" now? I guess a disk's volume needs to be selected before diskpart clean all" is executed.
i attempted a dual boot of debian and windows 7 yesterday, on a HP laptop with a single HD. this is where ive come a cropper as i think ive installed grub into the windows partition - and thus now it cannot boot windows.i have a recovery disk, but cannot run chkdsk, scannow and diskpart does not let me select any volume other than the recovery disk itself.example output;chkdsk /fthe type of the file system is NTFS.cannot lock current drive.windows cannot run .... because it is write [CODE]those commands are all i can find to fix the problem and none of them do. i DO NOT HAVE a installation disc as it's a HP with windows pre installed on it.
If you remove a folder feom the Windows Explorer taskbar jump list, the folder never appears in the list again. That indicates there must be a file that remembers the names of the folders removed. I want to permit folders I previously removed to appear in the jump list again.
In this tutorial, it's time to explore the new Windows 7 Taskbar further. We'll look at jump lists on the Taskbar and take a look at some customization options. Want to go back to the old style Taskbar with labels as well as icons? Want to add toolbars to your Taskbar? We'll show you how to do all that and more in this video.
I tried to add a new HDD to my computer which ended up making my computer unbootable.At first I had the "Restart and select proper boot device" problem, which was fixed.After that the Bootmgr is missing. I searched all over and still have not been able to fix the problem, here's the things I tried: [code] Having it the only HDD in the computer no change.The harddrive only worked with my laptop's HDD inside.
I'm trying to install Windows 7 Ultimate x86 on an HP 430 laptop. The Windows installer can't find the laptop's hard drive so (as a solution I found while googling) I tried Diskpart's clean and clean all functions. The clean function finished quickly but the clean all has been going on for more than 24 hours now. Is it supposed to take this long? The laptop has a ~500gb hard drive and an i3 processor.
i was trying to read on how to create the BSOD dump file, but how i'm supposed to do that if i can't get into windows 7 to install that software or change anything? My system is complete unacessible. I was trying to recover one harddrive using a case and usb when i found a tutorial saying i should open prompt DOS and type commands: diskpart and rescan but of course im not able to find that tutorial again it's sticky with my windows 7, i'm using dual boot windows xp x64 here now, and the windows 7 crashed after that rescan command, i tried the recovery options and chkdsk it did not fix the problem, i'm thinking as last option to create a triple boot shrink the windows 7 to install another and copy all to there 0x0000007B 0xfffff880009a97e8
I am trying to do a Windows 7 reinstall from my Samsung Recovery disk, as I have a Samsung laptop. I have received the infamous "windows could not format a partition on disk 0...Error code: 0x80070057" error. Through researching this forum it seems the diskpart program is used to troubleshoot. However, the program only displays English from the command lines or numbers (i.e. - 465 GB).Everything else is displayed as Chinese or Japanese characters. Is there a way to change the language to all English?
after running Advanced System Care Free (latest version), I noticed that my windows explorer pinned folders jumplist disappeared. Is there a way I can prevent that from happening again? I can't find a specific setting for it.
I was triying to wipe my HDD with diskpart >> clean all to overcome "Windows could not configure one or more system components" issue which I post to technet forum afew days ago.But I have some concerns about wiping process. Most of the notebooks are being sold with hidden partition which contains OEM Windows 7 and required driver files for a clean systems recovery. That partition made hidden by the manufacturers as factory defaults. I was wondering if diskpart can handle with this hidden partition?If not, that won't be a actual wiping the HDD that may reason of the issue mentioned in the link.
I have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
I have a USB external hard drive that I keep all my documents etc on (had it for years)I upgraded from Vista Home to & Home Premium then had to upgrade recently to Professional to run my Sage. Through all these upgrades my ext. drive ran fine. Occasionally the drvie letter would change if I had something else plugged into the USB, this was always easily corected in disk management by changing the drive path.The connection on the case packed up so I had to get the drive put into a new case, now when I plug it in the drive is assigned G instead of F, I tried to change the drive letter allocation in Disk Management but it won't let me as the program still thinks I have a second ext. hard drive which is labelled F. I suspect this has happened because when the usb connection broke the drive was disconnected suddenly instead of a proper eject.How do I get Disk Management to remove the inactive drive - i can't find any obvious way - eject, delete etc are all missing when I click on tools or tasks.
I installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive. I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.
There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked. Can someone explain how to do this, please? I'm not completely computer illiterate, but I'm not familiar with partitioning disks. It was just the one time with Ubuntu.
I have Win 7 home premium on an HP laptop with 4 usb ports. I have 2 Western Digital Elements 1.5 TB drives for backups. If I plug in one of the drives, Win assigns a drive letter, but if I add the second one it doesn't.
To troubleshoot, I've plugged each drive into every usb port on the laptop, and each port reads each drive alone, but if I plug in the second drive while the first is still in, it shoes up in devices but does not get a drive letter. I tried assigning a different drive letter to the device plugged in first, but Win still doesn't assign a letter to the second drive.
My laptop is Acer with Windows 7 home premium 64 bit OS. It contain only 1 single partition disk that is c drive only.Recently, i accidentally convert the c drive which contain OS into dynamic disk.After i restart the laptop, it shows the following: BootMgr is missing Please press Alt, Ctrl +del to restart Now, i not able to enter the window. I am so worry because my important data is kept inside the hard disk, and i still not yet do any back up copy on it.I searching on this forum and learnt that i need a window 7 installation disk to repair it, but my problem is the computer dealer not give me any windows 7 installation disk when i baught this laptop as their said all the driver and windows program already kept in side the harddisk.I tried to remove the laptop hardisk which is a 500GB toshiba SATA hardisk. Then, i use the other laptop with Windows XP professional with the intention to copy yhe file inside the toshiba hard disk.However, after plugged in the hard disk to the other laptop, under the disk management, it shows that the toshiba disk as : dynamic disk, unreadable.i having problem to backup the data inside the toshiba hard disk.....
Background: I have a WinXP desktop machine with a hard drive that may have a virus/trojan/rootkit/etc. Normal scans on the WinXP machine with MSE or ThreatFire have not discovered the problem. But the best way to scan a drive is to remove it and treat it as a purely 'dummy' data drive plugged into a usb drive dock and run the scan from a clean machine. This way any infected programs and/or O.S. on the drive will have no control to mask or hide themselves. My other computer is an HP Windows 7 laptop. So I removed the hard drive from the WinXP machine and via the USB drive dock and the Windows 7 laptop saw the WinXP drive icon appear. However, double-clicking that icon results in the popup window message[CODE]
I've been noticing after re-installing Win 7 that I get random floppy drive seeks and the hard drive light flashes like crazy and then everything is fine again.I have Clamwin AV,Spyware Blaster and Spybot S&D installed,but that's it,no Windows Defender or Essentials AV.Any ideas what causes this? It's a minor annoyance,but I just want to make sure it's not damaging anything.Also would Readyboost help me? I've got 2 gigs dual channel PC3200 ram(or I could go with 2.5 gig single channel PC2700)and a P4 at 3 gig until I can afford to upgrade my comp.This is my first post in quite awhile so I hope this is in the right place
I installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive.
I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.
There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked.
Before I even go further: yes, the "hide empty drives" has been unchecked)I had to reinstall my machine and I was able to to see the drive letters for the internal flash card reader. However I think something might have gone wrong when I give my external HDD a drive letter that was held by one of the flash card reader).I wrote "I think" because I am not really sure since I never wanted to use the internal card reader till today so I never noticed there was an issue. Anyway, the internal card reader does not show up even when I insert a card in the reader. Basically nothing happens. I have uninstalled the "USB Mass storage device" and it gets installed without any issue but the problem is still there: I can't see the reader. the INTERNAL flash card reader has a USB slot and when I insert a EXTERNAL flash drive, the EXTERNAL flash drive shows up.
