I have just one computer. When I connect to the internet via dial-up, my computer says I'm part of a network and it wants me to choose between Public Network and Home Network.
I'm assuming the "network" detected is my dial-up connection and that I should choose "Public Network". Am I assuming correctly, or is my network type selection irrelevant to my dial-up settings.
A week ago i turned my Win 7 HP Laptop into wireless router which is on EVDO 3G dial up using the windows (ICS) to connect my second Win 7 Dell laptop which was successful.Unfortunately, i ran out of data and now that i have recharged my Evdo 3G dial up modem hoping to continue browsing on both laptops, the Dell laptop which in this case is the client is showing connection signal but each time i tried to connect, this error will come up- Access type : No Internet access along with the dreaded yellow triangle alert on the system tray. Although when i plug the modem directly to the Dell laptop, it does browse smoothly. I have Google and read almost everything concerning this online including this forum but i have not come across a solution that is peculiar to mine.
View 1 Replies View Relatedi got problem with my mobile dial up modem, the modem was detected on device manager, and queryable on the modem properties itself, but i dont know why my modem cant be found when i try to create new dial up connection. i try to research over google and found, it could be the telephony problem, and yes when i try to open phone & modem control panel, then the error showed Code: phone and modem control panel can not be opened. you may have a problem starting telephony service , then i try to restaring the telephony service on windows services, i dont know why this problem occured, cause yesterday everything is just fine...
View 5 Replies View RelatedI have a Smartlink 56K PCI modem. I'm assuming there are no 64 bit drivers. any PCI or USB modems that will work with Windows 7 64 bit?
View 9 Replies View RelatedI have speed dial set as my start page. I've got 9 sites on Speed Dial. I don't use custom pics, although I do use a custom skin.Every now and then when opening Opera, it 'freezes' at the Speed Dial tab for 3-7 secs before displaying all tabs/windows. When it 'freezes', all tiles are the + symbol and are blank.Once it 'unfreezes', all is normal.It seems to happen sporadically upon a new start. Once the browser is open, the issue does not reoccur.It's been going on for the last 3 weeks to a month - same version, same skin.Basically, one day it just started happening without any changes to the browser. Prior to this, it loaded instantly 100% of the time.I've cleared cookies/cache the normal way and it's still happening. I've culled a few sites from speed dial without a positive result.
View 3 Replies View RelatedI do a lot of tech support for my family, however I'm a bit stumped a family member presented me with a problem on her hp netbook. She has verizon internet which is dial up and has a belkin router broadcasting the signal. Today however she was unable to connect. Usualy a box would pop up when she would connect to the network or a notification window would come up saying it is connecting to the dial connection. The window did have a box to check or un check asking to do it automaticaly, My question is how would i go about checking the box again and connecting the dial up connection?
View 6 Replies View RelatedI want to share my dial-up internet connection. OS Windows ultimate 64 Bit, my service provider has installed a switch in which the main line is connected. From that switch the line to my PC is been given and a dial-up connection is setup on my PC.
View 3 Replies View RelatedI recently received a HP notebook 110 which has a WLAN setup ( I believe this is WiFi). At home I use an older computer, a HP a1000n Pavillion with a 56k internal modem and MSN dialup. Is it possible to set up a WiFi station so I can my notebook can access the Internet? I am posting this here because the notebook using Windows 7, though my Pavilion uses XP. If this is the wrong area, please let me know and I will be move to the correct area.For anybody who wishes to reply, the answers must be complete and with a minimum of jargon so I will be able to understand them.
View 2 Replies View Relatedhow to configure a dial up modem in windows 7??
View 1 Replies View RelatedI have a new lenovo computer and I have to use that particular modem, cause we have no dsl or related in my area. It has Win 7, and of course no wizard. SO apparently Win 7 does not come with software that opens PDF? If I cannot get online without connecting, how am I supposed to download a free program? Purchase it and download it from my old system?
View 4 Replies View RelatedI have a 3G connection which at times need to be redialled. But the problem is in Windows 7 the maximum limit is 99.
Is there anyway to increase this limit?
Suddenly, my direct connected (Cat 5 to the broadband modem) computer is asking me to dial a connection. It no longer seems to know that it is simply connected. When I look at the devices tab, it shows Enabled for my network card and I have tried to reinstall the drivers.I dual boot with Ubuntu and Ubuntu is able to access the internet (and network) fine.
View 3 Replies View Relatedhow do i create a shortcut to dial up modem in win7?
View 1 Replies View RelatedI am using a Dial up connection but when I have to connect dial up connection then I have to change my local area connection ip. Is there any tip or method which is able to my local area connection ip through batch programming/Command prompt ?I need random ips every time before connect from dial up connection. Would it be possible from batch programming.
Windows 7 64 bit
4GB RAM
4MB DSL connection
I have a win 7 pc connected to internet through dial-up connection. It is being connected but i can't open any pages.. saying dns not detected.
View 1 Replies View RelatedI have a Dell xps laptop with Win7 home premium. I have a wireless network connection through my netgear, as it shows when open the "network & sharing center." As the screenshot shows, there is an annoying "dial up connection" window that randomly appears while I'm using the pc. I can't access the inter net while this is there so I have to close it
View 4 Replies View RelatedBefore my computer was working fine when i am connecting to the internet using a portable usb internet huawei. Then one morning when i tried to connect i got this "Error: 720".
View 1 Replies View RelatedHow to Configure Opera's "Speed Dial" ?
View 0 Replies View Relatedknow if there is a similar feature, or plugin in Internet Explorer 9, like Safaris' "Top Sites" or Operas' "Speed Dial" pages?
[URL]
I have a peculiar issue where I would need to have "Network and Sharing Center" open to be able to see that my my laptop's wireless connection. I would see the signal bar and also see the dreaded red x.Even when I have it open, I can see it refreshing each second; like its losing connection and reestablishing.My internet connection is working and has no issues.
Network and Sharing Center - Open
Network and Sharing Center - Open and refreshed
Network and Sharing Center - Closed
I'm having difficulty trying to get my new Windows 7 pc set up to share files across my existing home (wired) network which consists of 1 desktop pc running WinXP and 1 laptop running WinXP.I want the 'C' drive on each of the 3 computers to be shared. I've had the 2 Windows XP computers set up and working like this for several years without a problem but I can't seem to get the 'C' drive on the Windows 7 computer to do the same.All 3 computers have the same workgroup name and none of them require passwords to log on to Windows. There are no problems with the firewalls on any of the machines.On the Windows 7 PC when I right click on the 'C' drive and select the 'Sharing' tab, I have set this up to be shared and when I click on the 'Advanced Sharing' button there is a tick in the 'Share this folder' box, the 'Share name' is 'C'. If I then click on the 'Permissions' button, this shows a 'Group or user name' 'Everyone' and this group has Full Control, Change and Read boxes ticked. As far as I can see there is nothing more I can do.
However from my Windows XP computer, when I go to My Network Places and double click on the icon for the Windows 7 'C' drive, I get the message "\Computername is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.The network path was not found"I've subsequently set up a sub folder (of the Windows 7 'C' drive) for sharing by right clicking on the folder, choosing 'Share with' and then selecting 'Specific people'. I then set up a group called 'Everyone' with read/write permissions. Now I can navigate to this folder from my 2 WinXP computers.
My rig uses a Centrino Advanced-N 6230 wireless mini half-card. It reports the correct name except within the wireless network list. Instead of 6230 it reports 6320. I searched the registry to see if I could find the error, but nothing found. It's only a nuisance, and a minor one at that.
View 1 Replies View RelatedUnable to see home network computers in Windows Explorer Network screen.
I have a home network with 2 laptops and 1 desktop. The desktop I use as a "file server" in that all work done on the laptops is stored to the desktop. The desktop computer name is HAL. One laptop is fine and sees the network. The other just stopped seeing it; rebooted the laptop; rebooted HAL; did a number of refreshes without any luck. I opened EXCEL and found a worksheet that was listed that I knew was saved on HAL. Was able to open the file and when I tried the SAVE AS I could navigate through all of HAL just as normal. Went to Windows Explorer and still no HAL listed as a COMPUTER on the NETWORK. I have a internet connection so I know I am making it to the router at least. And when I check NETWORK AND SHARING CENTER it shows an active home network. The laptop is running Windows 7 Home Premium Service Pack 1 Build 7601.
This sounds really noobie of me but is it possible to improve local network transfer speed by adding a 2nd network card. I was planning to connect one exclusively for lan transfers and another one hooked to a separate wireless router.
Right now only a maximum of 3 users can stream SD videos off the PC before it gets a little choppy.
The pc in question runs on windows 7 and it's board has built in gigabit, I happen to have a spare gigabit card.
Home network with Wifi and ethernet. Using 3x Notebooks and 3x workstations. One of the workstations (W7 ultimate) keeps changing between Public and Home. When this happens, the internet connection dies. I cannot see other workstations either when on public network. Workstation using wifi. Does the same on cable. When it changes to Public, it disconnects from the internet and I cannot get to the router even though it has the workstation has an IP(DHCP or static). Default gateway and subnet is correct. TCP v4 is being used and nothing else is enabled.
Why is this happening?
- I have tried DHCP as well as Static addresses
- Reconfigured NIC(Netgear WG311T), uninstalled and reinstalled it.
- Removed Wifi connection and re-added it.
- Changed auth type, encryption type and keys to connection
Have I covered everything? The only thing different is that I installed a new router - Duo Plus 300wr. It cannot be the router because all the other notebooks connect to it wireless and so does my iPad, Android device and tablet...so it rules that out?
My problem is windows 7 hangs and freeze when access 2003 server Enterprise edition. This is not a small network, one of the biggest network.i have doubt on individual users on domain. before 2 months we had department wise users mean, for example Accounts@domainname.local. But after we created the individual users like john@domainname.local to all users. this is i believe the cause of problem. When we acess the server via the software it freezed for 5 seconds and then repeat to normal state. And after some time it hangs for 2 minutes.
View 5 Replies View RelatedI disabled my network adapter then restarted and now the adapter is no longer showing up in my network connections. How in the world do I get it back? I have looked at other options (like under the registry which was suggested on a couple of places). I have never seen this happen before. I even reinstalled my drivers and still nothing. How do I enable it again?
View 7 Replies View Relatedhow do i keep microsft explorer from trying to surf and find other providers and stay on one instead of showing every provider it can connect too ant2twon@yahoo.com
View 1 Replies View RelatedShould I turn off network discovery on each Windows 7 pc in a domain network after mapping each pc to server shares
View 2 Replies View RelatedToday, I managed to redecorate my bedroom; where my computer sat on top of a shaky, wooden desk. That desk is now gone, caput, and replaced by a much bigger, sturdier and prettier glass replacement.Before I dissasembled the computer to re-decorate, I was able to browse the internet at ease. There were no problems at all...However, after the new desk was setup - and all wires replaced in their correct slots, I find that I am unable to connect to the internet, or even the house's network! For the past year, I have been wired to the router using a RTL8168C(P)/8111C(P) Family PCI-E Gigabit Ethernet NIC. It was plugged into an extension cord, in my room, into the Ethernet port in the back of my computer. Downstairs, it's twin was situated no less than 2 feet away from the router - plugged into the first port.Now, when I boot up the computer, the network notification presents the following message: "Unidentified Network. No network access", and sometimes presents a yellow ! next to it. So, I am reduced to typing on my mother's laptop - which has no problems connecting to the network.I am able to use the ipconfig /release command, but unable to use the /renew - it hangs in the command prompt, then tells me that the DHCP server cannot be located. The IP, beforehand, was reverted to 169.254.223.117 - before all of this, I was 192.168.0.5?
View 2 Replies View RelatedI have a linksys usb600n (v2) using the Windows 7 driver from linksys. It installs and is displayed correctly in Device Manger - BUT it doesn't appear in the Network and Sharing Center as an adapter. This same device and driver were previously working just fine in this system - but I rebuilt the OS (clean install) after testing a number of security products out.
The initial install went fine - no problems that I remember - just plug in the adapter and install the drivers obtained from Linksys (Ver 3.00.01.0). I tried the same thing on the re-build and it looks fine until I go into the Network Center and can't set up wireless networking since the adapter does not appear.
SIW shows TWO (2) linksys USB adapters under Hardware/Network Adapters, but does not show the network adapters in the Network Information section.
Any ideas?