I am having problem with a device connection sound without any device being connected and when the sound pops up, my pc freezes for few seconds and its happening very frequently like every 10 minutes.
View 1 RepliesIt's recognized in device manager as "Unknown device". But I've not connected anything to pc. Also all of my usb ports are working at 1.1 speed. When I try to connect any device, I get the message "that it could work faster, if i connect it to hi-speed usb port".
View 6 Replies View RelatedI run an ACER Aspire X3950 with Windows 7 Ultimate 64bit. I purchased a "RAYGO eXtreme Hard Drive enclosure (SATA to USB)" and installed within it a 1 Terabite HDD that was working (and can work) flawlessly in a different PC. The HDD is about 85% empty. For no apparent reason, most of the time when I (try to) transfer large files to the external HDD, the latter stops working. However, I've been able to transfer (blocks of) files of more thann 30 Gb without a hitch.
When the external HDD does stops working, Device Manager shows "Unknown device". When it works, Device Manager shows two instances of "USB Mass Storage Device". If I restart the PC, most of the time the external HDD is ignored and not even the "Unknown device" entry appears. The closest thing to a solution I found at "Problems may occur when you try to transfer files to or from a device that is connected to a USB 2.0 hub", where they state:
Code: Resolution for Windows 7
To resolve this problem in Windows 7, add a EnHcSoftRetry registry entry with a DWORD value of 1 under the following registry subkey:
HKEY_LOCAL_MACHINESYSTEMCurrentControlSetEnumPCI<hw id><instance id>Device Parameters
Note To obtain <hw id> and <instance id>, open the Device Manager property page for each EHCI USB host controller, click the Details tab, and then select Device Instance Path in the list. Most systems have only one or two EHCI host controllers, so this should not be too difficult. To no avail, I've tried placing the EnHcSoftRetry registry entry both as part of the "Device Parameters" entry and as a sub of it. I've tried using DWORD and QWORD to no avail, too.
I have windows 7 ' My mobile Partner device is not working while connected to the PC. Asks for Drivers for this device.
View 1 Replies View RelatedI have an emu 1820m soundcard installed in my computer. It seems to be functioning perfectly. I can play dvd'd, cd's, iTunes, etc and the sound plays through my speakers without a problem. I want to record some sounds from a dvd but i cant get anything to record. Recording device is set to Wave EMU DSP as the default device. Im using Audacity to record and have set the recording preference device to be Wave (E-MU _-DSP). When I hit record I get an error 'Error while opening sound device. Please check the input device settings and the project template'And I cant record anything.In the built in Windows sound recorder, when I hit record, I get this error 'An audio recording device cannot be found' Everything seems to be functioning perfectly, yet i just cant record anything.
View 8 Replies View RelatedI connected my laptop to my TV using a VGA cable and although i have no problem with the picture i can't use the volume control on the tv - the sound still comes from the laptop. How do i change it so i can use the tv's bigger speakers?Also is it possible just to connect the tv and laptop using a HDMI cable and get the sound that way as both have HDMI ports?I'm using Windows 7 Home Premium on a Samsung R530 laptop and the tv is a Panasonic Viera.
View 1 Replies View RelatedAn audio device was disconnected or reconfigured how to verify that the audio device is connected or how to connect again please?
View 1 Replies View RelatedSince about 1-2 months ago whenever I hooked up my phone (HTC Rezound) to my computer through my USB chord I get an error message saying that it's an unrecognized device and that it was stopped because the device has shown previous problems. I used to upload videos and pictures from my phone to my computer about once a week for months straight and I didn't have a problem with it. Is there any way that I can adjust something in my computer to fix this?
View 1 Replies View RelatedI recently built a windows 7 home premium PC with an Intel 160 GB SSD as (C) for OS/programs and second 1TB HDD as (D) for data and backups. I also have a DVD burner (H). They are all SATA drives running in AHCI mode. Immediately after installing just windows, I used the windows backup feature to successfully create a system image to a local disk (D) which was and still is nearly empty. The next day, after installing drivers, updates, and a few programs, I went to create a second system image but this time it failed. The process started as it should have but halfway through it failed with the following message:
"The backup failed"
"The device is not connected (0x8007048f)"
At that point, after exiting the program, the D drive does not show up on my computer. Upon rebooting the D drive reappears. I searched the web and found some references to checking whether volume shadow copying services and their dependent services were working and that didn't work. Another reference said to try updating to a newer bios as some have bugs that screw up the enumerator for the drive order. The BIOS I use is the latest and wasn't changed since my first successful attempt at creating the system image.
Windows 7 Home Premium
Gigabyte GA-P55A-UD4 Bios 6 (latest)
Intel 160 GB SSD (C) OS
1 TB HDD (D)
Raedon 5770
4 GB DDR3 RAM
I have an external USB soundcard (Native Instruments Komplete Audio 6), and it has come to my attention that I am completely unable to play DVDs on my computer when my soundcard is connected. WMP does not give me any error message; it just abruptly stops playing the DVD and the DVD title becomes "Unknown DVD". However, when I disconnect my sound card, DVDs play as per normal.
View 4 Replies View RelatedI am using windows 7 64 bit on my desktop (motherboard ASUS P5E) ASUS - Motherboards- ASUS P5E And I installed VGA SAPPHIRE HD 3870 (ATI RADEON Technology) 512 MB.This VGA has a converter plug from DVI to HDMI.connected a 3 m HDMI cable from a converter to the Samsung TV.I can see a picture on the TV but no sound?
1- download latest driver from AMD website from the link below : AMD Catalyst
2- Follow the instructions here : How to Set Up Audio on an ATI Radeon HD | [URL] No audio from HDTV when playing audio / video from a computer system
3- Digital Audio (HDMI) option was grayed out (not clickable) as can be seen in the snapshot below :[URL]
I'm in a pickle with my machine and Windows 7 after this latest update. On startup I get an error from MMDevApi.dll saying that it might not run on Windows or... something else. This also occurs anytime a program tries to use the sound card ie. WoW, Yahoo IM, Live IM, SL, etc. I've updated my sound card drivers to the newest ones. I still get an error that says the device is detected when going to "Sound Devices" in the control panel.
Trying to adjust the sounds themselves leads me to the Windows Audio thing... which won't start even from the component list.
[window 7 ultimate]
normally i only have 1 sound card/sound device in sound settings when i use hdmi with my tv, i have 2 sound devices in there, and i can choose 1 one of them as default, and all applications i run will play sound on that default device, so i choose hdmi (my tv) as default, open chrome for my mom watch movies, sound play on my tv (hdmi), that's what i want and i open firefox, go to Internet, sound also play on my tv (hdmi), that's not what i want, i want it (firefox) to play sound on my pc, so my mom can watch movies on tv, and i can watch Internet on pc
is there a way to do this? a way to set per-application sound card/sound device setting? i know some programs like windows media player or vlc can let you choose sound card, but firefox, chrome do not. i tried indievolume and it did not work, even uninstalled, reinstalled but did not work, or is there any browser that let me choose sound card setting (like wmp and vlc, but these 2 are not browser)
and does anyone know if mac or windows 8 has this feature as built-in? if windows 8 does then i might upgrade
I have connect my laptop using an HDMI cable to my TV. And from my tv I have connected my two HiFi speakers. When the TV is on an AV channel I have sound coming from the TV and HiFi speakers but when I switch it to the HDMI source channel, sound only comes from the TV and not HiFi speakers.This is frustrating because I want to watch movies on my TV through my laptop and get the feel of some surround sound through the HiFi speakers but it is not working!
View 2 Replies View RelatedI've had this problem since windows vista, in windows xp i could record my line in perfectly, without any problems, but now, even if i enabled Stereo mix(tried mono also) it won't make any sound when i try playing some music.
Anyony that can help me with this?
Also, as stated in the title, i'm using an USB sound card device.
i have a brand new toshiba laptop connected wirelessly. however it keeps showing connected however no internet access.i have a notebook as well that is brand new and it connects no problems what so ever.im using windows 7 home premium and 64 bit os.
View 1 Replies View RelatedI have recently installed Win7 Ultimate on my PC - was running Vista Home Premium.Had no problems until last week. I had a BSOD, which surprised me, haven't seen one of those in a while. Major error on my part to not write down all that sais, but there it is.Now I have NO sound at all. Actually, my computer does not recognize the monitor speakers, nor does it recognize external speakers, when I tried using a pair of them instead, nor does it recognize headphones when plugged in to the jack. The computer informs me that the device is simply not plugged in - even though it IS.I have downloaded and updated every driver I can think of to no avail. So I am now at a standstill as to what to do.
[code]...
For my radio project and podcasts I've invested in a digital microphone. I also got a wireless keyboard and mouse with volume control, not very important but it factors in.
When I start Windows I have two sound devices: The actual speakers and this ProSound mic. Under the actual speakers would be things like VLC and under the mic would be other vital things like Iron (Chrome). If I want to watch/listen to something online I have to plug out the mic. This puts all the programs under the Speakers device. If I plug it back in these programs RETURN to the ProSound mic.
So first of all I need to know why my programs made this choice and how do I put a stop to it? Secondly how do I make my speakers my primary device so I can use these awesome volume controls I paid out the *** to use.
I could really do with some help. Just installed W7 64 but when I come to install drivers it cannot even detect my x-fi SB at all. Thus I cannot install the driver. No sound at all - I am at a loss. Does anyone have a solution? ps I have a ASUS ABN-SLI Nvidia chipset.
View 6 Replies View Relatedi am not hearing sound
View 1 Replies View RelatedAfter virus attack on ibm Thinkcentre 832077g, I formatted xp and installed windows 7 but there is no sound . If I try to play a song, there is a message saying no sound device installed. Which drivers should I install becuse have tried many without success.
View 2 Replies View RelatedI have system with multiple Sound playback devices. Most of the time it needs to be on the first entry in the list of devices (HDMI output with me).I'm looking for a way that when I have manually set it to another device in the list, and then shut down the pc that at the next boot it automatically reverts back to the first in the list without manual intervention.
View 2 Replies View Relatedi am in the process of setting up my audio preferences but i'm confused about various aspects of windows 7 audio settings in the device/sound manager. my computers are part of a recording studio setup, and as such, one of my computers has an maudio 1010lt audio interface card. as my studio is also an entertainment setup, i began to investigate if win 7 has some kind of audio "profile" manager, whereby i might be able to select various "devices" or outputs that would automatically be selected when various applications are started. for instance, when i use my daw(reaper), i would like win 7 to automatically select the maudio card as the in/out as the maudio outputs(8) are connected to a patchbay, and are normalled to be connected to an analog mixer. however, if i am listening to audio on the net, like Internet etc, i would like the mobo onboard stereo(front) outputs to be selected by the os, as they are connected to a pair of standard computer powered speakers, as i do not want the mixer powered on during regular listening. and then there is the movie thing. since my mobo has stereo, 5.1, and 7.1 as well as s/pdif output jacks,(and input), from what i understand, the s/pdif output must be used for sound surround as the onboard realtec chips decode dvd etc to the s/pdif outputs, which i would like to connect to a soundsurround reciever, with 5.1 speaker setup, of which the front speakers are used for standard stereo listening..anyway, as i looked at the device/sound manager screen, i saw an "hdmi" device in the list.(see screenshot). well, i don't have anything in the computer that has an hdmi output. so, i am curious. can anyone tell me what this "hdmi" device is or what it is referring to?
View 6 Replies View Relatednormally i only have 1 sound card/sound device in sound settings when i use hdmi with my tv, i have 2 sound devices in there, and i can choose 1 one of them as default, and all applications i run will play sound on that default device,so i choose hdmi (my tv) as default, open chrome for my mom watch movies, sound play on my tv (hdmi), that's what i want and i open firefox, go to Internet, sound also play on my tv (hdmi), that's not what i want, i want it (firefox) to play sound on my pc, so my mom can watch movies on tv, and i can watch Internet on pc is there a way to do this? a way to set per-application sound card/sound device setting? i know some programs like windows media player or vlc can let you choose sound card, but firefox, chrome do not. i tried indievolume and it did not work, even uninstalled, reinstalled but did not work,or is there any browser that let me choose sound card setting (like wmp and vlc, but these 2 are not browser)
View 1 Replies View RelatedI'm on the verge of re-installing Windows. It started earlier today, I'd just installed Call of Duty: World at War off Steam, tried to launch it and it kept crashing. Tried a few things, but nothing worked and read it might be a sound driver issue. Tried updating my ASUS Xonar DX drivers to the latest version, but once the PC had restarted I had no sound and a the speaker on the taskbar said there's no output device installed.
Uninstalled these drivers and tried installing the ones I was using and same problem. I opened up playback devices and the default speakers were my monitor as I connect via HDMI from my graphic card to my main monitor. The "set default" option was greyed out and I couldn't change the default speakers unless I disabled the HDMI audio, but still I had no sound. Tried uninstalling the graphic drivers and re-installing the drivers first, but still nothing. Even when the only audio device was the sound card, there was no sound.
If I troubleshoot, it says the audio device is disabled, even though it isn't. I've checked all the audio services and they're all running. I even tried enabling my onboard audio again, but I still get the same problem of the audio device apparently being disabled. I ran an sfc /scannow, and that fixed a few things, but still no audio. Only thing I can think of doing now is just re-installing Windows.
I need device driver for soundmax integrated audio digital for Windows7
View 1 Replies View Relatedwhen I changed windows xp to windows 7 on my laptop .I lost multimedia audio controller, pci modem, mass storage controller drivers .i have no sound.
View 1 Replies View RelatedI installed windows 7 on my Sony VGN NR498E and I want to know if I need to install another sound card to have my sound input devices option availiable again.
View 2 Replies View RelatedDownloading sound device for hp 500bmt
View 1 Replies View RelatedFor about 2 weeks ago my battery on my laptop (ASUS Eee PC - Windows 7) got low and the computer turned off. When I turned it on again the sound on the computer didn't work, the sound symbole on the right corner on the bottom has a red X sign. I've just recovered my computer to fabric-new and the sound still doesn't work and the red X symbole is still there.When clicking on the sound symbole with the red X on the right corner in the bottom it says "identifying problem..." and then it says that it couldn't identify the problem... My webcam on the computer doesn't work either after that.On control panel it says "no audio device installed" and when I deleted RealTek and downloaded it again it still doesn't work.
View 1 Replies View Relatedam trying play music on Internet i am not able to hear anything and when i open windows media player it wont play put all the other sounds on my computer work properly.
View 1 Replies View Related