I dont have a great graphics card, and it is integrated into my motherboard and uses a percentage of my RAM. I was just wondering if it is possible to dedicate more of my RAM to my graphics since i never use all of it anyway? I know this sounds kind of stupid but my mind wanders on occasion.
View 6 RepliesThe reason I ask this question is because I have heard of it but never really known how or, how large to make the partition. Also what are the pros and cons of this method vs using the whole drive as one partition?
View 3 Replies View RelatedI have a 2006 single-threaded game that sometimes uses 100% of one core. I have a 3 core AMD CPU.
Will dedicating a core to the game boost the performance a little bit? Or is Windows 7 is already automatically moving processes to another core when one core tends to be saturated?
How can I dedicate one core to the game without having to manually set all the other processes to use only the two other cores? Is there a way to pre-set the core affinity before a process is run? (Windows System Resource Manager seems to be able to do this, but there doesn't seem to be a version of it for Windows 7) Maybe defining the game priority as Real Time would achieve the same effect? Or is there a risk that this would hang Windows and other processes?
I wonder, can I assign some of the RAM to the graphics card, so the graphics card will think its its own memory, and will use that along its own memory.
I am asking because I need like 70 MB more memory on the graphics card for GTA IV, so the textures will stop disappearing. I know this would most likely cause slowdown, but I wonder if its possible.
My problem is when i select gpu id software it shows everything normal and it shows you have ati radeon 5770 and shows u have 1gb but when i check my system online with srtest.com or even i open dxdiag through the windows run panel in the display settings i got approx 701mb memory of gpu memory. I don't what is that and also my windows experience score down a little bit. I hv already done a clean installation of windows 7 ultimate but nothing happen. and also i have 8gb ram ddr3
View 1 Replies View RelatedFor my graphics card, it says it is an Intel G33/G31 Express Chipset Family. I know it has 64 MB dedicated to it and I'm not sure if I can increase that or if I have to buy a graphics card.
View 9 Replies View RelatedI'm Trying to change the Dedicated graphics memory for my Laptop Since right now its only 256 MB out of the 3067 MB It has. I can't figure out how to change it[CODE]
View 2 Replies View Relatedhow to check graphics memory of laptop
View 1 Replies View RelatedI have core i3 laptop with windows 7 home basic original os, inbuilt graphics card
View 2 Replies View RelatedThis is my WEI for my graphics card.
Display adapter type NVIDIA GeForce 9300M GS
Total available graphics memory 2303 MB
Dedicated graphics memory 512 MB
Dedicated system memory 0 MB
Shared system memory 1791 MB
Display adapter driver version 8.15.11.9038
Primary monitor resolution 1280x800
DirectX version DirectX 10
Can I change the amount of dedicated system memory?
what settings can i add to my computer with memory of 2040 MB RAM to boost my graphics so that i can be able to play games on windows7?
View 1 Replies View Relatedi have heard a lot of my friends saying that they are unable to play high resolution and high definition games on their pc and told that they are on a low budget to buy a graphics card.here is a solution for that:there is a software named 3-d analyzer available in the internet which acts as a virtual graphics card for playing games. you can enter the graphic card needed from the 4 available graphic cards available and then you can get the attributes of that graphic card..if fine tuned,you can play games at the range of a 128mb ram virutal graphic card on your non graphic card pc. note:graphic intensive games,that requires atleast 512mb of graphics memory can't be played through 3d analyzer if you don't have a graphic card,but you can try running it if you have a 256/128 mb card. steps for using the 3-d analyzer software, *first download the file from here, *then extract that software and open the software, *then,select the exe file of the game that you want to run, *choose the select option, *then you can choose the attributes the options you require to play the game,*the attributes may be pixel shader or disable rendering in the game or emulation or some other options specified, *then,enter the device id and the vendor id for the graphics card you need from the available graphics card on the right.*i would suggest the ati radeon 9800pro to run most of the games like fifa 08/09 or prince of persia two thrones/sands of time, *then choose the run option and then i assure that the game would run for you at a decent/playable speed. note:1.if it shows any error that a file is not found pls reinstall the software.2.if the screen turns black/blank then play with the options in the s/w, by trial and error method,if fortunate,may be,you'll be able to run your favorite game.3.if pixel shader/shader version x.x not found,then select the appropriate shader model and run the game. all the best..happy gaming..if any queries post it below.how to: use 3d analyzer video at Internet
View 9 Replies View RelatedI have a desktop with an ATI Radeon 3200 HD integrated graphics,can that be changed or would i have to change the whole box?
View 9 Replies View Relatedhow to convert a shared video memory into dedicated video memory and system video memory? me and my friend have the same specs computers but the same game runs slow in my computer but it runs smoothly in his computer?
View 1 Replies View Relatedi bought a new hp g62 laptop with i5 and ati . i dont know what is the problem with the resolution and the size of the screen..
View 6 Replies View RelatedIn my windows 7 rating i have got 6.3 in gaming graphics but in graphics i have got only 4.9. Why this is happening? A graphics card which is good for gaming is that not good for desktop aero graphics?
View 3 Replies View RelatedHow to switch from onboard graphics to a graphics card
View 2 Replies View Relatedi am having a problem with my memory getting tied up / used up and not being able to access it again until i reboot.
machine: dell xps studio 8100
os: win 7,
processor: i7 2.8
ram: 16gb (max it will take)
video: ati radeon 5700 (running 3 monitors)
versions: as far as i know i am running current versions of everything, including video drivers, flash, chrome, etc. (i've tried running chrome with both the build in version of flash and the system version -haven't seen a difference)
browser: i nearly exclusively run chrome / canary with auto-updates so am at the latest builds.what seems to cause me to use up / run out of memory is after i play videos (Internet, netflix, etc.), the memory seems to get used, but is not returned to the system, even if the browser is closed and re-opened.right now for example things are working fine; i rebooted my system a couple hours ago (but have not played any videos). i have adobe lightroom running, picasa, chrome and canary (currently 4 web browser windows open with 52 tabs open). task manager currently shows me using 8.20gb of ram, that seems pretty reasonable to me.
normally my system will keep running properly (if a program is closed, memory is freed up) right up until i start to play any videos (Internet, netflix, etc.) then it will start using up more memory. (of course i expect it to use more memory during playback) however, even if i restart the browser, the memory does not get freed back up. for example, just prior to the reboot, with everything closed, i was using right around 8gb of ram. once i rebooted, i was using 1.something gb of ram prior to opening any programs.however, once i start playing some videos, i never seem to be able to get my ram freed back up again unless i reboot the whole system. this is not just a problem with how much memory the system shows as being available, i frequently actually run out of memory. (task manager will show me as using around 15gb and then everything starts swapping out like crazy).
I find that if I run chkdsk and watch the memory usage in task manager it jumps by about 50MB every 2 seconds or so until it either finishes or hits around 3.2GB at which point my physical memory shows 99% used (I'm running 4GB), and the system of course slows to a crawl.f you just run a quick chkdsk on your boot drive you may not notice it, but try running something longer like chkdsk /r on a flash drive or chkdsk /f on a bigger internal drive (but not your OS drive as this would require a reboot) and watch the memory usage climb. I have duplicated this on both systems I have running Windows 7. My XP machine (checking the same USB flash drive) uses a much more normal amount of memory for chkdsk (20 - 30 MB).
View 9 Replies View Relatedanyone knows how the HD 2500 compares to the 3000 and 4000? I'm mostly looking for improved video transcoding compared to my Pentium G620 and don't really need the "gaming" graphics capabilities. But I haven't been able to find any information as to how the HD 2500 compare.
View 9 Replies View RelatedMemory Usage Goes Up Gradually (Memory Leak)When I starting the Windows (in the first few hours) everything is normal But after 1 day or 2 (sooner or later) the amount of available memory gradually goes down and the physical memory usage increasing. This increasing, continues until the memory usage reaches near the 88% and at that point , there isn't any memory available to operate any software . Also when memory reaches that point, I can't access any drive in the HDD; because everytime I want to open any folder, the following error appears :c: is not accessible.Insufficient system resources exist to complete the requested service At this point, I even can't shutdown or restart Windows normally; I must restart windows manually by pressing the restart button.after restart, everything goes to normal again; but this problem appears again and again ...
my system :
------------------------
OS : Windows 7 x86
Cpu : Intel P4 3.0GH
Vga : nVidia 6600
MB : Gigabyte GA-8I915G Duo
PSU : Corsair 750W
RAM : 2GB DDR-400 Transcend
(I have these memories for 2 years)
Physical Memory: 2000 mb
Paging File: 2000 mb
Virtual Memory: 6000 mb
0- using some optimizing and freeing softwares like (Memory Booster Gold - RAM Saver Pro - CleanMem)
1- Scanning my computer with antivirus and antispywares
2- Changing antivirus software
3- Updating windows with all updates available via Windows Update
4- Updating drivers of all hardwares
5- Downloading and installing the following hotfixes that are related to memory leak : The memory of the nonpaged pool may leak when you enable IPsec on a computer that is running Windows Server 2008 R2 or Windows 7 A memory leak issue occurs in the Windows Management Instrumentation service on a computer that is running Windows Server 2008 R2 or Windows 7 FIX: A memory leak may occur when you use the Microsoft ActiveX Data Objects Library in Windows Vista, in Windows 7, in Windows Server 2008, or in Windows Server 2008 R2 A memory leak occurs when an ADO Recordset object calls the UpdateBatch method A nonpaged pool memory leak occurs when you use a WFP callout driver in Windows Vista, Windows 7, Windows Server 2008, or in Windows Server 2008 R2
I just built a new computer and started with 8GB of memory. A few weeks down the line I purchased another set of the same memory because it was on such a good deal and had great reviews (newegg). It also was working well for me, so I figured maybe more could be better.
I haven't noticed any decrease/increase in system performance except Alt-Tabbing has recently got slower. Also, Windows 7 was sitting tight on 1.3gb to 2gb of memory usage prior to the extra 8 (now 16) being added. Even when gaming, it went up to like 3gb. Now that I've added the extra it's going up to 4.5gb or better. Also, is it possible to speed up my alt-tabbing? It seems to have a good 3-4 second pause in it instead of being immediate like it was.
Computer specs:
Windows 7 HP 64-bit
gSkill 16gb 1866 memory (BIOS shows it at 1866, too)
Intel i5-2500k Sandy Bridge (OC'd 4.6 with factory Overclock presets)
ASRock z68 Extreme4 mobo
I've completed a new custom build, but have had problems with BSOD from the beginning with any installation of Intel Graphics drivers or the installation of any graphics card.
When I first completed the build, the XFX-7950 Black was installed. I booted to BIOS without issue, but when I inserted the Windows 7 (64 bit) it would boot through the windows logo screen but immediately BSOD right after going to the first install screen.
I removed the graphics card, and was able to complete the full Windows install without issue. I updated Windows and the drivers on the system but as soon as I installed the Intel 3000 Graphics driver, it would BSOD on every restart. I recovered back prior to the Graphics driver install and installed all other drivers. I updated the BIOS to the latest version.
I have reattempted the XFX 7950 multiple times in different slots, but with the same results. I also attempted my Radeon HD 4550 from my old computer but it gave the same results. It always boots through the Windows logo screen, but BSOD within a few seconds of reaching the password screen.
I broke down and installed Driver Whiz, which did detect multiple outdated drivers that I had not caught, but none of these fix the issues.
I've attached the requested zip. I don't think all BSOD's are showing up, as I've had to use recovery points after installed drivers didn't work. The last .dmp on 19 JUL was a Intel Graphics driver install attempt that I pulled off in safe mode before recovering back to the pre-driver point.
System:
ASUS P8Z68-V Pro/GEN 3
Intel 2600K
XFX R7950 Black Edition
OCZ 850W
Crucial 128 GB SSD
Seagate Barracuda 1 TB HD
Corsair H100
Windows 7 64 bit (full)
I recently bought 2x1GB Ram Sticks for a Dell DimensionE510It has a Pentium4 2.80Gh Processorand factory 1 GB RAMIt's currently running Windows 7 x64hen I put the new RAM sticks in the system recognizes the new memory says it has 3.0 GB of ram and runs until I start actually using to new memory, as in start running more programs simultaneously and it crashes and I get two BSOD*. As far as I know the sticks match the motherboard, as in that's what I was told.*"Memory Management" and "PFN List Corrupt"As far as I understand it is a driver issue, but I honestly am not sure.
View 6 Replies View RelatedTo start, I have Windows 7, on Sony Vaio laptop. I have been working on the issues with the malware removal team, but now machine looks clean, I am still having issues. When starting the computer and going to the task manager, I can watch explorer.exe start at about 18K memory usage and then grow constantly until it is running with almost all of the computer's physical memory after about seven min. I cannot get the context menu to show up after a few min by right clicking on anything. I had been experiencing "freezing" while playing Eden Eternal (an online role playing game) before that, which made me consider malware and seek help here at BleepingComputer. The freezing has ended, last time I played on that machine at least, but now there seems to be some issue with the explorer.exe taking all of the memory. I haven't been using the machine since I don't trust that there's not something running in the background that shouldn't be. In resource monitor there were "connections" that had "-" for both the name and the PID, but I don't know if that was the malware of if that's normal somehow? Issue with explorer.exe seems to be limited to only one user account, and not the other one. That is to say that if I log on one of the other accounts explorer.exe behaves normally, as far as memory usage.
View 12 Replies View RelatedI have windows 7 64 bit and also running a ssd. Just a few days ago I've started to have an issue where after my computer is running for a couple hours all processes continually increase the amount of memory they are using until I get an out of memory error. Here is a pic of it around 75%. I have 8 gigs of ram (kingston) that before this never went above 4gigs of use, so not sure what is causing this suddenly.
View 9 Replies View Relatedmy camara says memory card is protected (reset switch on memory card) how do you do this the camara wont take photos untill this is dun
View 1 Replies View RelatedWin 7 x64, all updates. intel core 2 duo E8800. 8gb ram in 2 pairs. Nvidia 9800GT.2x HDD with lots of free space. ESET antivirus + Outpost firewall Every time I shut down the computer, I get an error like this:The instruction at 0x72f151d3 referenced memory at 0x72f151d3. The memory could not be written.Sometimes they will auto close, others I will have to force the shutdown.The thing that seems interesting is that there's a pattern to the memory addresses.When it's a software exe crashing, it's always 0x7xxx51d3.When it's explorer.exe crashing, it's always 0x7xxx87bc.
View 4 Replies View RelatedSo i have 32x Windows 7 I also have 8GB of memory.
My question is how much memory can this architecture actually see? its 32bit, so shouldn't it only see a max of 4? in the my computer properties, it tells me i have 8, but a bunch of programs tell me i have the 3.25.
Do i need to move to 64x? and what happens with the drivers for my custom built pc? will i be able to find them? (most of my disks wont install 32 bit drivers on Windows 7 beta) i cant really do the vista driver backup with driver max, because i use XP
any help? ideas? suggestions? Thoughts? Comments? Wize cracks?
which graphics need for nfs run my grapics card id 1gb,,should i play game on dat kind of graphica
View 2 Replies View RelatedPreviously when i was with XP.
i was able to share my RAM with my graphics, i had 128Mb on board graphics and was able to share my RAM with it to make it 512Mb, this was done through my BIOS.
Since i installed Windows 7. It is like it has compltely changed my BIOS user interfacce, and i havnt a clue on how to do it now.
Any ideas?