My Outlook 2010 installation has started displaying a dialogue box that my mailbox is over its limit and that I should consider coverting my data file to the new style MS Outlook 2010 data file which can handle larger file sizes.
View 2 RepliesMy Outlook 2010 installation has started displaying a dialogue box that my mailbox is over its limit and that I should consider coverting my data file to the new style MS Outlook 2010 data file which can handle larger file sizes.I was successfully using MS Outlook 2003, and 2010 for a while, now this error message pops up!
View 9 Replies View RelatedI have received a list of data which is in the form of a table containing several columns.This list contains something in excess of 300 lines which I want to put into an Excel 2003 spreadsheet.Is there any way I can achieve this without the tedium of manual input of each line ?
View 5 Replies View Related[FONT=verdana, geneva, lucida, 'lucida grande', arial, helvetica, sans-serif]I initially had 1 500gb dynamic disk, with one partition containing all my documents and windows files. I created a partition in the free space to copy my documents into so I could overwrite Windows keeping my documents intact. However I did not have enough free space for all my documents so after copying over one batch of files I shrunk the windows partition and extended my document partition. I had to repeat this again so I now have three extended document partitions.[/FONT] I then put in the windows CD, formatted the OS Recovery, SYSTEM Reserved and Windows parititions but then was unable to install Windows as it did not recognise any disks. I attempted FixMBR etc but to no avail.
I searched around and saw i may be able to change the sector hex from 42 (dynamic) to 07 (basic), but im wondering whether doing so will preserve the extended partitions i have? So my question is, will changing 42 to 07 preserve the extended partitions. Do I need to repeat for each 42 (like the link you posted) and then the three dynamic extended partitions will then become one basic partition? At the moment I can not actually see the data so have no idea how to back it up? Otherwise I would do as you say and back it up, format and copy back over.
[URL]
DISKPART: Acronis Disk Director (see documents spanned)
Active unDelete (again, three partitions)
HxD (showing 42)
So, basically im asking if i am safe to convert 42 to 07 WITHOUT losing any data?
I have a 500GB dynamic hard drive which had a Windows 7 install on it. I wanted to reinstall Windows, so from within Windows setup I formatted the system and Windows partition, leaving a partition containing documents and pictures (i was unable to delete them). From then, Windows seemed unable to recognise the disk so i searched in DISKPART and found that the disk was labelled as INVALID.
After Googling around it looks as though i can simply change the 1C02 in the hex from 42 to 07 - however, my only concern was that the documents i have on this drive are spanned across three adjacent (dynamic?) partitions - so i am concerned that by focing the disk to be basic i will lose the connection between these partitions. [URL]
DISKPART:
Acronis Disk Director (see documents spanned) Active unDelete (again, three partitions) HxD (showing 42) So, basically im asking if i am safe to convert 42 to 07 WITHOUT losing any data?
I am looking for some advice or suggestions on something that has bugged me on windows 7 since i started using it back when it was released.I have quite a large (almost 200 gig) music collection, and browsing for music to listen to has always been a bit of a chore.Wondering if any of you know of a way to go back to XP style album art folders like this:The one on the left looks so much nicer!It always made me think Microsoft had take a backwards step by doing away with the old folders!Oh and 1 other thing.When you try to group a folders contents by 'Name' does anyone know if there is a way of modding windows so that you can sort by: A,B,C,D etc etc, rather than the standard A-H > I-P > Q-Z ??
View 4 Replies View RelatedI have downloaded various video clips from different websites and would like to copy or burn then to blank DVD's. However, I am not that good with computers and don't exactly know how. I have a DVD burning software which I have taken my own personal DVDs and made a copy of them (which is not illegal by the way, I made sure and checked that). But I don't know how to do the same with various video files I have downloaded from the internet or that friends have emailed to me. Some of the files types include AVI, and MKV file types, others I cant find out what kind of file it is. I can play these on my computer and watch them, but I would like to maybe compile the video files and put hard copies of them on DVDs.
View 7 Replies View RelatedI am doing some data entry and would like to know if instead of having to hand do every part and make a new template each time if I can just somehow convert the file (PDF) into a html (Dreamweaver) file??
View 3 Replies View Relatedhow do i burn dvd files to play on all portable dvd players?
View 1 Replies View RelatedAfter doing a copy and paste, we have, on 3 occasions so far, found the copied data in an entirely different file. Twice data from a copy appeared in an excel spreadsheet and once a picture copied in facebook appeared in an email. The excel problem is very worrysome as it is our family budget. how this could happen? In the case of the excel events no paste operation was intentionally done.
View 5 Replies View RelatedI am wanting to copy my application data file from my PC (Win 7 Prof 64)to my laptop(win 7 hope premium). I have autocad user info etc and other prog info which has been stored in the roaming profile which I need to access on laptop. I want the same autocad settings available on laptop
Can I simply copy across the entire roaming profile or will this cause problems
problem either stopped on the usb data transfer from windows 7 PC to a usb HDD or flash drive; or crashed and give errors. However, i dont encount this sreious problem but rather annoying problem.
As soon as i use my Windows 7 PC to copy a file to usb stick, the process is all ok, but when i read the file, it seems to be corrupted, example, if i have put a avi file in the usb drive, it will play as skipped.
I have updated the hotfix http://support.microsoft.com/kb/976972 but still doesnt fix my problem. I have updated the chipset driver from nvidia web site, still no help.
I know for sure that problem occured after i fresh installed to windows 7 from xp pro. I have also tried to uninstall the usb root hub but still give me the same driver as it was.
When I try to open my 2010 Oulook the following window opens: Heading - "Outlook data file password." Message - "Type the password for [my e-mail address]" I cannot change any settings in Outlook, everything is blank except for the window described above. I have tried all the passwords I know I could have or usually use and nothing works. There is no option to type in a username. I do not use an exchage server, only the POP and SMTP settings. I have Windows 7 Pro 32 bit loaded with Office 2010 Home & Business.
View 1 Replies View RelatedI have WIN 7 with Excel 2003. Is it possible to transfer data contained in a .pdf file onto an Ecel spreadsheet ?
View 3 Replies View RelatedPurchased a website and email domain. I have a fresh install of MS office 2010 and when trying to incorporate my pop3 mail everything works fine, even the test emails, but I can not save profile because i get an error, "This information service is not installed on your computer", so it wont let me create a new data file. when I search for an existing .pst none are found on hard drive. so I'm kinda stuck. I tried the same basic thing via control panel > mail > data file tab > add data file, but i get the same error. "This information service is not installed on your computer." I took a look at my add/remove windows features pane to see if maybe on windows install I missed some email protocols or something but I could not find any. did the same for the office 2010 install, checked to see if I did not install a key feature. still nothing.Tried using IMAP as well since this does not require .pst access but still same error. "This information service is not installed on your computer."
View 5 Replies View RelatedI have another issue regarding Office Outlook 2007 and Windows 7 RC (Build 7100). When I open up Outlook sometime (pretty frequently lately).
I get a message telling me that the data file was not closed properly last time it was opened and a check is now is progress (whoo-hoo).
I am happy for it to check the file to make sure that there is no problem with it but doing it every single time I open Outlook for the days work ahead (gimme a break).
There was a thread that I came across on here that Ian had posted about disabling the iTunes Add-On in the Trust Center. But I have tried this to no avail.
Does anyone have any suggestions?
I keep an Outlook data file on my external HDD that I carry between work and home.How do I get it to stop downloading emails twice!?I have three accounts; a Gmail account (which doesn't have this problem), a work account that uses SmarterMail and another account that's set up through Windows Live Mail.
View 2 Replies View RelatedMy WIn 7 as failed and I had to re install it, I thought that I was safe with my server backup, but some file where note saved.I did try with some software like Recuva, R_Studio, Mareew Company but nothing came out
View 1 Replies View RelatedI read a couple threads on trying to change the default outlook account from POP to IMAPI realize it is not that easy to do, I have tried to do it by just deleting the pop account and setting up a new one but that does not work.When I try to change the default data file it is grayed out.
View 2 Replies View RelatedI've just upgraded my Outlook 2010 ANSI .pst file to an Unicode format by creating a new .pst and importing data from the old .pst. I want to delete the old .pst,but I get the error message "You cannot delete this Outlook data file. Configuration information in the file is being copied to your new default data file. You can delete the file after this information is copied."I don't think information is being copied, as I've waited to see if it would resolve, but I do think that there is still some connection to the old .pst file that is preventing deletion. I have changed the folder of my email accounts' storage location to the new Unicode .pst. What else do I need to do?
View 2 Replies View Relatedhad a few problems dual booting and managed to get every thing fine. Installed easyBCD and clicked install to the wrong partitionNow when i boot after the bios it appears "windows failed to start, a recent hardware change might be the problem." Offers solutions to boot from CD which i have but wont boot. Will just appear the same screen.file:\boot\bcdinfo the windows boot configuration data file does not contain a valid OSDell inspiron 1720
View 1 Replies View RelatedI built this machine a while back and I've had this appear a few times. I am the only one who uses the computer and as far as I know everything is set as administrator. These files were on an external USB drive and I was trying to open them from there. I checked permissions and it appears there is full access. However, editing within the permissions dialog boxes are not as that clear to me.
View 2 Replies View RelatedImageShack� - Online Photo and Video Hosting I just did a 2 pass overwrite of my entire HDD using copywipe, but yet Easus is still finding over 60,000 + NTFS file records and near 4,000 files identified?Why didn't the overwrite erase this data? I don't understand - I've been at this for a whole day now. I literally formatted, booted from a usb and ran copywipe, did a 2 pass overwrite, and reinstalled windows. How do I get rid of these NTFS file records?I'm looking through my RAW recovered files and it's still all there...
View 5 Replies View RelatedI was trying to get my laptop to boot into safe mode to get rid of a file. I went to msconfig and picked Safe Boot, after I restarted my laptop, I got the message:Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your Windows installation disc and restart your computer.
2. Choose your language settings, and then click "Next."
3. Click "Repair your computer."
If you do not have the disc, contact your system administrator or computer manufacturer for assistance.File: BootBCD Status: 0xc0000034 Info: The Windows Boot Configuration Data file is missing required information.When I hit enter, it just restarts my laptop and brings me to the same screen. My laptop did not come with a installation disc.. The only thing I did was change a setting which I thought was going to boot me into safemode in msconfig.
I tried to install new updates of Ableton live and the machine crashed badly... and since them it has really gone a bit wonky. When I press the on button to boot up the laptop I get the following message.The Windows Boot Configuration Data (BCD) Store file contains some invalid information.[CODE]I have a back up on another external drive ..... plus I have made a repair disk and so on when I first got the machine.
View 2 Replies View RelatedOne of my friends has a Windows 7 computer, but suddenly it could not start,I got an error like this
File: BootBCD
Status: 0xc0000098
Info: The Windows Boot Configuration Data file does not contain a valid OS entry
And I ran a Code: chkdsk c: /f /r followed by a Code: Bootrec /RebuildBcd , where it asked me, if I want to add the entry to the BCD store, and of course I answered yes Afterwards I rebooted the computer, but it came up with a blank screen. I then tried to restart the computer and it keeps coming up with a blank screen. I tried to repair using the Windows 7 - cd's repair, but with no succes. It found the Windows 7 Home Professionel, but when I tried to repair it, it says, that it could not find the OS (something like noOSInstalled). I then came into cmd again, and tried first with Code: BootRec , but it could not find the OS.Now I set it to run Code: chkdsk over the night, but what can I do, if I comes up with the blank screen again? Do I have to reinstall the computer, or are there other solutions?
CHKDSK found ad sectors in the following files Code: WindowsassemblyNATIVE~1.303PRESEN~1FFB7C7~1PRESEN~1.DLL
WindowsassemblyNATIVE~2.303SYSTEM~3.SER559EBA~1SYSTEM~1.DLL If this indicates something
Maybe I have to try with F8, when I restarts the computer for the first time after running the Code: BootRec .
windows boot configuration data file does not contain a valid OS entry (0xc0000098)Trying to fix my aunts laptop (Toshiba satellite/windows 7). Tried a recovery disc, which was painfully slow but no joy.
[code]....
I did the diskpart thing in command prompt:
vol 0= E dvd rom
vol 1= C 100mb partition (active)
vol 2= D 232gb partition
I'm looking for a program to get all of my personal data organized. I know there are plenty duplicate file finder apps out there, but what are your experiences with them? I'd love to find one that will show me duplicate pictures, even if renamed. It would be even better if it easily allowed me to specify a directory to put all of the duplicates in...so they can be removed from a drive. I probably don't need to worry about other types of files, as it is just my photos that would have duplicates.
View 2 Replies View RelatedHitman blood money data file MSVCR71 dll download?
View 1 Replies View RelatedMSVCR71.dll is missing?
View 3 Replies View RelatedI want to backup my PC's data files to an external HD using Windows 7 backup & restore utility. If I use the recommended default option that also includes a back mirror of Windows 7 will the PC automatically backup only New data since the backup at the scheduled option chosen? Will the backed up files on the backup drive appear as windows file folders (My Pictures, My Documents etc.) or be in an encoded file format?
View 1 Replies View Related