I got a program which after the installation does not work and gives Run time error 339 component MSFLXGRD.OCX or one of its dependencies not correctly registered: a file is missing or invalid.
View 1 RepliesWhile installing MP3 Cutter we have got an error saying "Component 'Comdlg32.ocx' or one of its dependencies not correctly registered: a file is missing or invalid".
View 1 Replies View RelatedTech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i3-2120 CPU @ 3.30GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 4
RAM: 6056 Mb
Graphics Card: Intel(R) HD Graphics Family, -1259 Mb
Hard Drives: C: Total - 938661 MB, Free - 887873 MB;
Motherboard: Dell Inc., 0GDG8Y
Antivirus: PC Tools Spyware Doctor with AntiVirus, Updated and Enabled
I use my computer for logging amateur radio contacts and e-mail primarily.I uninstalled a program yesterday that I guess I shouldn't have. It was Roxio.After doing this I tried to open one of the logging programs. These programs are used for logging contacts,controling and following my radio as well as my antenna rotor, puts me on telnet and it even sends morse code fom the Function keys.Anyway when trying to open the program I ger an 'error 39' Component MScomm32.osx or one of it's dependencies is missing or unregistered.I had the same problem with another file and after spending over 60 bucks, I got it fixed... but they would only answer that one question and I couldn't follow up with other problems.Another program I use exhibits basically the same problem but it is MSINET.ocx.
When I start a game called Chart Wars 3, I get this error:
View 5 Replies View RelatedI had to reinstall Win 7 today. I then installed BitDefender Free 2009 and when I discovered that there was no real time component, I uninstalled with Revo Uninstaller Pro. When I rebooted, nothing appeared on my screen. I checked the display by connecting it to me laptop and it is fine. How do I solve this?
View 4 Replies View Relatedi use ulead 10 on windows 7 and vista but it can't run well, there's a missing component,
View 1 Replies View RelatedI get this error message when i boot up Windows 7:Wireless Configuration: Notification dll has not been registered, program will not work correctly.When i turn it on it goes into Windows Error Recovery mode and only gives me the options of Safe Mode or Start Windows normally.Whichever I choose looks like it's loading up but when it gets to the blue Win 7 Welcome screen the error message pops up.The only option is to click OK. When I do, nothing happens the page blinks on and off and won't go any further until I do a hard shut down.Before this happened i was trying to uninstall Windows live messenger.
View 2 Replies View RelatedI get this error when trying to create a new data access page in MS Access 2003:OLE Server is not registered.To register the OLE server, reinstall it.Now, I have no idea what that is but it's halting progress that is wasting precious time.
View 3 Replies View Relatedhow do i register
View 1 Replies View RelatedI have just purchased a new Sony VAIO top of the line computer with Windows 7. My Studio MX Suite installed but Dreamweaver won't run. I get the initial start up box but nothing else happens. The other components all run OK. I did look at the program properties and selected XP SP3 which was on my old computer
View 3 Replies View RelatedActiveX component can't create object? How do i fix this i just reinstall windows 7 ultimate and i cannot fix this
View 4 Replies View RelatedI had no problems with CNET but when I got this new PC every time the TechTraker says I have new updates, every time I try, it says "no registered application for this extension". This is using my normal browser Opera. When I copy and paste the address to Internet Explorer, no problem but why does it give me this problem and I would much prefer to do it on Opera.
View 8 Replies View RelatedHaven't had this error since Win 2000, but after installing a clean copy of Windows 7 on my workstation, and a number of programs, when I try to run mmc from the run prompt I get a Class Not Registered Error, which is causing havoc on all my software installations.how to fix or re-register?
View 9 Replies View RelatedI am trying to register netgear 83 and I am unable to do so.
View 1 Replies View Relatedfor a few days (maybe a week) now I have had trouble with my Canon MX870 Printer/Fax. I have been using it successfully for the past 16 months now, via USB connection, installed on both my Windows 7 laptop and my Windows XP PC (I just unplug it and plug it in to whichever computer I need to print from).For some reason, it has decided not to recognize the drivers on my laptop.I have tried to uninstall and reinstall (no go).I also deleted every instance of MX870 from the registry that it would allow me to (some it wouldn't for some reason no access yes I am Administrator).Reinstall again still no go.The Windows 7 Updates were failing to update the Fax component which I thought was the problem, then all of a sudden it was successful still no printer. Now, it is unsuccessful again.I don't use the Fax component.The reinstall from the CD is successful, but when I plug in the printer, it fails."Device driver software was not successfully installed. Please consult with your device manufacturer for assistance getting this device installed. [code] Also, each time I unplug then plugin the USB cable, it attempts to reinstall the device drivers, the printer successful, the fax failing.It never did this before when I was happily printing away from both computers.
I have no problem printing from the XP machine when it's plugged in there all is good there.I have been to the Canon website and downloaded the latest drivers, which installed perfectly, but again when I plug in the printer, it fails to install the fax driver and the printer won't work..I have also tried all of the various USB ports and ruled that out.I've also run the Hardware and Devices Troubleshooter also without success.Also, I don't know if this is relevant or not, but I can't even print to PDF. My CutePDF program is also not working. I thought this may have been a workaround until I got the printer working again, but no luck.CutePDF will go thought its processes (it's now ticked as default as my Canon is now longer even listed), up till the point where you need to name the file you're creating (that box doesn't appear) all you get to do is print, choose CutePDF, then it disappears no file or if there is, I have no idea where it's gone or what it's called can't find a trace of it.I have not downloaded or installed any other programs (except Windows Updates) in some time that could have caused this. I am at a loss. This is a business computer and printer and is causing much angst.I am running Windows7 (64bit) on an Acer Aspire Laptop (only 16 months old) Firefox 13.0.1.Also running Microsoft Fixit for Printers doesn't even detect the printer and tells me to install one it already is As does the Troubleshooter Does not detect the printer.
I have windows 7 so decided to have a go at the windows media center. Showed up all music but can't get my photos to show up? How to view my photos in windows media center. When I try to select photos. A box comes up with info "Media Player has a necessary component of Windows Media center did not start properly. Restart WMC"
I tried that sill no joy.
What is the framework component used in win 7 Ultimate and Enterprise..?? Is there any difference between these two?
View 1 Replies View Relatedsystem could not register component error 2908
View 2 Replies View RelatedI installed Registry Booster on my mom's laptop. I used a video to slightly hack the registry to get it for free (don't interrogate me, she needed a cleanup badly). If it helps, here's the video I used: < piracy advice removed> Now everytime her computer boots up, a pop-up comes up saying that the wireless configuration notification.dll has not been registered about two minutes after it boots up completely.it is a Dell Inspiron 1764 with Windows 7 Home Premium 64-bit.
View 1 Replies View RelatedI just did a clean install of Windows 7 x64, and now I have 2 pop-ups telling me somethings wrong.They are both called Name Setup, and they say:1 - efm sys file corrupt. Reinstall2 - rmorsm.dll not registeredI did a SFC /scannow as stated in SFC /SCANNOW Command - System File Checker and although it found and repaired some errors, none were of the 2 I mentioned above, and they reappeared also after doing the SFC scan.I even did several scans, but the problem still occurs.Googling either of these 2 error messages only yields: Missing Files but no side effects, which led me to the SFC scan in the 1st place, which solved the problem for him, but persist for me.
View 1 Replies View Relatedi didnt know where to put this thread. Anyways, when i try to instal Call of Duty 2 on my windows 7 i get an error that says Library not registered, and i have to go to Task manager to close it. CoD2 is original, no cracked **** and i downloaded the evaluation copy of Windows 7 from microsoft.
View 7 Replies View RelatedWindows 7 update is stuck at last check for updates on 25th June on this laptop belonging to a friend. Tried running the System Update Readiness Tool but the Hotfix for Windows KB947821 it wants to install first always fails, and you can't say no to this or it says process aborted by user.Some other sites discuss copying files from another PC, which I don't have as I have a Mac. Also registry editing. Is there any way to fix this without doing either?Win 7 SP1 isn't installed. Tried downloading it (as Win Update won't find it) but it won't run - the same 800737 error and advises downloading the SURT as above. The error again is Windows component store corrupt.Win Update constantly wants to install 3 important updates, suspiciously all the same minute size of only 15kb - KB2676562, 2679255 and 2709715 from April, May and June 2012. These appear to install ok and go into the update history, but then show again and again as needing to be installed - clearly all related to the corrupt component store.
View 2 Replies View RelatedSome time ago I installed WinCleaner on my pc (which I had been successfully using for the previous decade on various machines) and obviously managed to damage/delete some key registry entries, as when I try to access various functions as an administrator (most notably trying to open Services) I get a message:C:Windowssystem32services.mscWindows cannot access the specified device, path or file. You may not have the appropriate permissions to access the item.I've also lost the option to change start menu/control panel etc to Classic View - the option just isn't there any more.So I tried to do a System Restore but there are no restore points and when I try to create one I get another message:The restore point could not be created for the following reason:A Volume Shadow Copy Service component encountered an unexpected error. Check the Application event log for more information. (0x80042302)I assume the problem is all connected but have no idea what to try, short of doing a "reset to factory settings" which I'm loathe to do in case anything goes wrong - if it will even work
View 6 Replies View RelatedI get the above error every time on startup since installing some software. I have uninstalled the software but still get the error!
I tried system restore but it failed for an unspecified reason
When i try to open my shortcuts on my desktop,i get an error saying the protocol (http) does not have a registered destination. What can i do?
View 2 Replies View RelatedIve just bought secondhand laptop hp mini 210-2000 with windows starter, am complete beginner but need to get rid of registered owners name throuout the system without complete system restore, have tried everything I can find on internet, but nothing comes up like what people are saying, or it just refuses to change name!
View 1 Replies View RelatedWe have identified a potential bug in the installer for Microsoft Office 2010 32-bit under Windows 7 32-bit. After entering the initial product key, if Office 2007 is already installed, the user will be prompted to perform an Upgrade or Custom install. If the user chooses a custom install under the 32-bit platform, the installer will attempt to first uninstall Office 2007 and then install the Office 2010 components. However, a symptom of the problem will begin with an unusually slow installation process, after which an error will appear: "Error 1935: An error occured during the installation of assembly component {E60D1DD4-B04F-4D3A-9E6D-63A0D4D8E4F1}. HRESULT: 0x80070005. Setup failed. Rolling back changes." This error occured with Microsoft Security Essentials v2 resident in the background, as well as XMarks for IE, Logitech Mouse and Keyboard, Realtek HD Audio Manager, and Intel Graphics Media Accelerator for Mobile. After some time the setup will apparently hault a roll-back.
View 4 Replies View RelatedI have an older PC (AMD Athlon II x4 630 Processor) running Windows 7 Home Prem - 64 bit. I noticed about a week ago my mouse was acting up (figured it was a bad mouse and didn't think much about it), soon afterwards I started getting that blue screen of death and it would shut down. My current virus protections is AVG, which I ran. I then ran Malewarebytes, Superantispyware and Spybot in both regular and safe mode. They seem to find a few things but nothing that really looked serious. I tried System Restore but got an error statement that it wasn't functioning correctly because of some type of Volume Shadow component problem (which I researched and turned back on to no avail).
Other symptoms are when I try going to control panel or even the microsoft update page they open but are minimized - when I try to open them larger they almost look like they open and go to the far right of my screen out of site. The reason I think it is a virus is that in safe mode the control panels opens right up - but still cant get to microsoft update page. This problem seems to be getting worse the last couple of days. What is weird I really don't notice much else wrong with pc. I can still go online without a problem, home page hasn't changed any and haven't noticed pc slowing down at all.
This popped up all of a sudden when I went to windows update.
"Cocreateinstance failed; code 0x80040154 class not registered".
System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Ultimate , Service Pack 1, v.721, 64 bit
Processor: AMD Phenom(tm) II X4 940 Processor, AMD64 Family 16 Model 4 Stepping 2
Processor Count: 4
RAM: 3839 Mb
Graphics Card: ATI Radeon HD 3300 Graphics, 384 Mb
Hard Drives: C: Total - 476937 MB, Free - 375796 MB; D: Total - 76308 MB, Free - 30433 MB; F: Total - 57295 MB, Free - 26892 MB;
Motherboard: BIOSTAR Group, TA790GX 128M, , None
Antivirus: Microsoft Security Essentials, Updated and Enabled
I recently bought the PC game The Movies. I tried downloading but "Compatibility Issues" and "Library Not Registered" shows up. So I went "Computer" right clicked the game "Open in new Window" than tried to install it by "Run as Administrator" on Setup. But nothing seems to happen, instead my computer starts to make jittery noises. I've tried this several times.
View 7 Replies View RelatedI have a laptop with Windows7 from work, registered to the domain from my company. At home I have a desktop with XP with shares on it. When I bring the laptop home and try to access the shares on the desktop, I am asked to enter user and pass (ok, I use the admin account on that desktop), the Seven shows me the list of shares. Very good, you might say. That is so until you try to enter the shares when it pops a "network error": "Windows cannot acess \xp-desktopshare1 You do no have permission to access \xp-desktopshare1. Contact your network administrator to request access." What access?! These are full shares for the admin account used to authenticate.
I have a third machine with Seven on it, this time a personal machine, not registered to a domain, and with this one I can properly access the shares mentioned earlier. Also, my laptop from work, can properly access shares from my work place and shares on the personal laptop with Seven on it. So this issue happens only when trying to access shares on XP at home.