ActiveX Component Can't Create Object
Aug 2, 2012ActiveX component can't create object? How do i fix this i just reinstall windows 7 ultimate and i cannot fix this
View 4 RepliesActiveX component can't create object? How do i fix this i just reinstall windows 7 ultimate and i cannot fix this
View 4 RepliesI get the above error every time on startup since installing some software. I have uninstalled the software but still get the error!
I tried system restore but it failed for an unspecified reason
I have searched high and low for a solution to this problem. I am running Windows 7. This error pops up in a window titled "fatal error" - "Unable to create an instance of required object". It happens in Firefox (14.0.1) and Word (Office 2010) usually when I'm trying to save or download a file. It then crashes the program and sometimes my entire computer.I've found tons of old references to problems relating to Allaire Homesite, but the page that windows support sends you to a Macromedia page that no longer exists as they were purchased by Adobe. At one point in the last year, I had started to install Homesite 5 but wasn't successful as I could not find my serial number. But that was long ago and this error just started happening now.
View 2 Replies View RelatedSystem Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i5 CPU 750 @ 2.67GHz, Intel64 Family 6 Model 30 Stepping 5
Processor Count: 4
RAM: 8190 Mb
Graphics Card: ATI Radeon HD 4600 Series, 1024 Mb
Hard Drives: C: Total - 114370 MB, Free - 71446 MB; D: Total - 953866 MB, Free - 821189 MB; E: Total - 99 MB, Free - 70 MB; F: Total - 476837 MB, Free - 396929 MB;
Motherboard: ASUSTeK Computer INC., P7P55D, Rev 1.xx, 101697990000924
Antivirus: Microsoft Security Essentials, Updated and Enabled
I have started getting message box titled "MTxfr" which states, "Could not create file mapping object(5)" I can click the OK or just close it but I want to know what it is and why I'm getting it.
when i try to run my HP alerts it says "alert with GUID : object reference not set to an instance of an object" an won't run alerts.
View 1 Replies View RelatedFor reasons I won't go into, I had problems with my Win7 Premium upgrade over Vista Basic. So I did a clean install. There are a few quirky things now, the most irritating being the inability to use ActiveX controls from Web sites (i.e., running a PC Pit Stop scan). There are postings all over the place, so I know I'm not the only one. I have rejiggered every conceivable setting under custom settings in IE8, and it just doesn't work. No controls come up, no prompts?
View 3 Replies View RelatedI have a problem with my Windows Services.Each time when I launch Windows Services window, I get a warning:One or more activex controls could not be displayed because either:
1. your current security settings prohibit running activex controls on this page, or
2. you have blocked a publisher of one of the controls.as a result, the page may not display correctly.
The warning pop-up opens only when I click on Extended tab.The problem has nothing to do with IE security, because I can open pages with ActiveX controls on them and so.I have installed Spybot spyware/malware removal tool. Then uninstalled it.I'm not sure if this is the cause of the problem. But I presume it is.
How do I stop Internet Explorer telling me that it has 'restricted this page from running scripts or activex controls', the only option it gives me is to 'allow blocked content' and when I click on it ,it reloads the web page and puts up the same popup message again.
View 4 Replies View RelatedI have flash player in my laptop but it does not working. I tried to download activex but without success?
View 1 Replies View RelatedI need to allow an ActiveX (.cab) add on so I can remotely view my home security DVR.Windows will not allow me to install this add on because the publisher is unknown.I am running Windows 7 home premium whch unfortunately does not have group settings.I think I need to edit the registry in some way to allow this add on but I have not been able to figure it out.How can I configure Windows 7 Home premium to allow ActiveX?
View 9 Replies View RelatedDoes anyone know of a plugin that would allow me to make a reflection of an object on photoshop instead of manually doing it? Suppose if I have an item, I want it to look like its sitting on a glass table (hence thats where the reflection would come in), any suggestions?
View 2 Replies View RelatedI want to alter the attachment manager in Local Group Policy Editor, but when I open it up, I am constantly greeted with a warning message that says One or more ActiveX control could not be displayed because either: 1) Your current security settings prohibit running ActiveX controls on this page, or 2) You have blocked a published of one of the controls.The odd thing is I am not trying to access anything online, this is merely a Windows policy editor access from my machine. I am wanting to change the attachment settings to stop warning messages from appearing when certain filetypes are unzipped.
View 1 Replies View RelatedMy Information Bar is not showing, so I can't activate the ActiveX Control (I tried to do a Windows Update today and the computer will not do same without the ActiveX Control, which I can't get because there is no Information Bar to make that possible). How do I get the Information Bar to show up on my IE 8 screen (I understand that it should be right under the Address Window)? I think that, when Microsoft installed IE 8 for me a short time ago during an automatic update procedure, even though I had not asked for that to be done, that is when the Information Bar disappeared. I'm just guessing at that, but I think that is when that happened
View 1 Replies View RelatedThe computer is Windows 7 Professional 64-bit edition version 6.1 Build 7601 service pack 1. The computer is not in a domain environment. I believe this may be a security issue however I completed an in-place windows 7 upgrade to try and fix the problem but after all of the windows updates, etc the error remains and appears every time the computer is rebooted..[CODE]
View 1 Replies View RelatedI had to reinstall Win 7 today. I then installed BitDefender Free 2009 and when I discovered that there was no real time component, I uninstalled with Revo Uninstaller Pro. When I rebooted, nothing appeared on my screen. I checked the display by connecting it to me laptop and it is fine. How do I solve this?
View 4 Replies View Relatedi use ulead 10 on windows 7 and vista but it can't run well, there's a missing component,
View 1 Replies View RelatedWMIDiag.vbs is reporting 30 errors which are all similar (0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found).Sample; Root/CIMV2, MSFT_NetInvalidDriverDependency, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.MOF Registration: 'WMI information not available (This could be the case for an external application or a third party WMI provider).I checked several of these missing items using the wbemtest tool and they are missing.Search is set to search document contents. I searched the WBEM folder, all of Windows 7 and the registry for this item but no joy!Question: What is telling the vbs script that this item (MSFT_NetInvalidDriverDependency) should be there?
View 2 Replies View RelatedI have a Dell Inspiron 14 that I bought last April. The hard drive crashed before Christmas and I had to send it to Dell of replacement. Obviously all other software applications on the computer were gone when we got the computer back from Dell. I have since reinstalled all software using my last license to do so. Now I am having major issues with internet explorer giving me an "Object Error" on some websites. All indications I have to reinstall windows 7. How do I do this and not loose all of my other applications that are on this computer?
View 9 Replies View RelatedI have just purchased a new Sony VAIO top of the line computer with Windows 7. My Studio MX Suite installed but Dreamweaver won't run. I get the initial start up box but nothing else happens. The other components all run OK. I did look at the program properties and selected XP SP3 which was on my old computer
View 3 Replies View RelatedThe computer is Windows 7 Professional 64-bit edition version 6.1 Build 7601 service pack 1. The computer is not in a domain environment. I believe this may be a security issue however I completed an in-place windows 7 upgrade to try and fix the problem but after all of the windows updates, etc the error remains and appears every time the computer is rebooted...
Log Name: System
Source: Microsoft-Windows-TerminalServices-RemoteConnectionManager
Event ID: 1057
Task Category: None
Level: Error
[code]....
for a few days (maybe a week) now I have had trouble with my Canon MX870 Printer/Fax. I have been using it successfully for the past 16 months now, via USB connection, installed on both my Windows 7 laptop and my Windows XP PC (I just unplug it and plug it in to whichever computer I need to print from).For some reason, it has decided not to recognize the drivers on my laptop.I have tried to uninstall and reinstall (no go).I also deleted every instance of MX870 from the registry that it would allow me to (some it wouldn't for some reason no access yes I am Administrator).Reinstall again still no go.The Windows 7 Updates were failing to update the Fax component which I thought was the problem, then all of a sudden it was successful still no printer. Now, it is unsuccessful again.I don't use the Fax component.The reinstall from the CD is successful, but when I plug in the printer, it fails."Device driver software was not successfully installed. Please consult with your device manufacturer for assistance getting this device installed. [code] Also, each time I unplug then plugin the USB cable, it attempts to reinstall the device drivers, the printer successful, the fax failing.It never did this before when I was happily printing away from both computers.
I have no problem printing from the XP machine when it's plugged in there all is good there.I have been to the Canon website and downloaded the latest drivers, which installed perfectly, but again when I plug in the printer, it fails to install the fax driver and the printer won't work..I have also tried all of the various USB ports and ruled that out.I've also run the Hardware and Devices Troubleshooter also without success.Also, I don't know if this is relevant or not, but I can't even print to PDF. My CutePDF program is also not working. I thought this may have been a workaround until I got the printer working again, but no luck.CutePDF will go thought its processes (it's now ticked as default as my Canon is now longer even listed), up till the point where you need to name the file you're creating (that box doesn't appear) all you get to do is print, choose CutePDF, then it disappears no file or if there is, I have no idea where it's gone or what it's called can't find a trace of it.I have not downloaded or installed any other programs (except Windows Updates) in some time that could have caused this. I am at a loss. This is a business computer and printer and is causing much angst.I am running Windows7 (64bit) on an Acer Aspire Laptop (only 16 months old) Firefox 13.0.1.Also running Microsoft Fixit for Printers doesn't even detect the printer and tells me to install one it already is As does the Troubleshooter Does not detect the printer.
I have windows 7 so decided to have a go at the windows media center. Showed up all music but can't get my photos to show up? How to view my photos in windows media center. When I try to select photos. A box comes up with info "Media Player has a necessary component of Windows Media center did not start properly. Restart WMC"
I tried that sill no joy.
I got a program which after the installation does not work and gives Run time error 339 component MSFLXGRD.OCX or one of its dependencies not correctly registered: a file is missing or invalid.
View 1 Replies View RelatedWhat is the framework component used in win 7 Ultimate and Enterprise..?? Is there any difference between these two?
View 1 Replies View Relatedsystem could not register component error 2908
View 2 Replies View RelatedWindows 7 update is stuck at last check for updates on 25th June on this laptop belonging to a friend. Tried running the System Update Readiness Tool but the Hotfix for Windows KB947821 it wants to install first always fails, and you can't say no to this or it says process aborted by user.Some other sites discuss copying files from another PC, which I don't have as I have a Mac. Also registry editing. Is there any way to fix this without doing either?Win 7 SP1 isn't installed. Tried downloading it (as Win Update won't find it) but it won't run - the same 800737 error and advises downloading the SURT as above. The error again is Windows component store corrupt.Win Update constantly wants to install 3 important updates, suspiciously all the same minute size of only 15kb - KB2676562, 2679255 and 2709715 from April, May and June 2012. These appear to install ok and go into the update history, but then show again and again as needing to be installed - clearly all related to the corrupt component store.
View 2 Replies View RelatedSome time ago I installed WinCleaner on my pc (which I had been successfully using for the previous decade on various machines) and obviously managed to damage/delete some key registry entries, as when I try to access various functions as an administrator (most notably trying to open Services) I get a message:C:Windowssystem32services.mscWindows cannot access the specified device, path or file. You may not have the appropriate permissions to access the item.I've also lost the option to change start menu/control panel etc to Classic View - the option just isn't there any more.So I tried to do a System Restore but there are no restore points and when I try to create one I get another message:The restore point could not be created for the following reason:A Volume Shadow Copy Service component encountered an unexpected error. Check the Application event log for more information. (0x80042302)I assume the problem is all connected but have no idea what to try, short of doing a "reset to factory settings" which I'm loathe to do in case anything goes wrong - if it will even work
View 6 Replies View RelatedWe have identified a potential bug in the installer for Microsoft Office 2010 32-bit under Windows 7 32-bit. After entering the initial product key, if Office 2007 is already installed, the user will be prompted to perform an Upgrade or Custom install. If the user chooses a custom install under the 32-bit platform, the installer will attempt to first uninstall Office 2007 and then install the Office 2010 components. However, a symptom of the problem will begin with an unusually slow installation process, after which an error will appear: "Error 1935: An error occured during the installation of assembly component {E60D1DD4-B04F-4D3A-9E6D-63A0D4D8E4F1}. HRESULT: 0x80070005. Setup failed. Rolling back changes." This error occured with Microsoft Security Essentials v2 resident in the background, as well as XMarks for IE, Logitech Mouse and Keyboard, Realtek HD Audio Manager, and Intel Graphics Media Accelerator for Mobile. After some time the setup will apparently hault a roll-back.
View 4 Replies View RelatedI have an older PC (AMD Athlon II x4 630 Processor) running Windows 7 Home Prem - 64 bit. I noticed about a week ago my mouse was acting up (figured it was a bad mouse and didn't think much about it), soon afterwards I started getting that blue screen of death and it would shut down. My current virus protections is AVG, which I ran. I then ran Malewarebytes, Superantispyware and Spybot in both regular and safe mode. They seem to find a few things but nothing that really looked serious. I tried System Restore but got an error statement that it wasn't functioning correctly because of some type of Volume Shadow component problem (which I researched and turned back on to no avail).
Other symptoms are when I try going to control panel or even the microsoft update page they open but are minimized - when I try to open them larger they almost look like they open and go to the far right of my screen out of site. The reason I think it is a virus is that in safe mode the control panels opens right up - but still cant get to microsoft update page. This problem seems to be getting worse the last couple of days. What is weird I really don't notice much else wrong with pc. I can still go online without a problem, home page hasn't changed any and haven't noticed pc slowing down at all.
After recently downloading the service pack, I've had issues with my computer, including the themes service not working. I want to uninstall the pack so that I can do a system repair using my disc because my disc is older than the service pack. However, the service pack doesn't show up on the programs list. If I try to uninstall by looking at windows update or the command prompt I get an error message that says:
Installer encountered an error: 0x80073712
The component store has been corrupted.
I have already done a sfc file checker thing through the command prompt, and it said that some files were corrupted, and I couldn't access the log (access denied). I'm currently running the 64 bit version of Windows 7 Home Premium. I obtained the log from the sfc scan. [URL]
I have a Windows 7 Home premium x64 OS and it has been giving me more and more problems. I've ran virus scan on AVG and Windows security and came up with nothing. I've tried msconfig and disabling all non-windows services from starting and still nothing has worked! Windows Live ID Sign in use to start after I had to manually start it (even though it was set for automatic), and now it won't even start at all, giving me the error it didn't respond in a timely fashion. My windows task manager doesn't respond, and my system restore gives me an error saying "A volume shadow copy service component encountered an unexpected error".
The problem seemed to start when my web browser would start to not load pages. Then my printer wouldn't work because the "printer spool" service wouldn't start, then of course the hardware and devices in the control panel wouldn't load. After resolving that by manually starting the bluetooth service, the Task Manager stopped working, and the "printer spool" service failed and would not stay started. My start up speed has seemed to have hit a brick wall as well, I've ran start-up repair to no avail. This is my build as copied from newegg.com:
ASUS P6X58-E PRO LGA 1366 Intel X58 SATA 6Gb/s USB 3.0 ATX Intel Motherboard
EVGA SuperClocked 01G-P3-1461-KR GeForce GTX 560
CORSAIR Enthusiast Series TX750 V2 750W ATX12V v2.31
Intel Core i7-950 Bloomfield 3.06GHz LGA 1366 130W Quad-Core Processor
G.SKILL Ripjaws Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1066
Microsoft Windows 7 Home Premium SP1 64-bit
Western Digital Caviar Green WD10EARX 1TB IntelliPower 64MB Cache SATA 6.0Gb
This computer was quick as can be when I built it, and had had no problem with it whatsoever until now. I can't think of any program that may be messing with it, I've gone through my installed programs and startup programs and nothing to me is out of the ordinary.