I changed my user account to the Windows 7 Super Admin account because I am easily annoyed when a computer tries to lock me out of areas :P I am completely okay with this and have no issues. However, many people keep telling me all about how this is a very bad thing to do, e.g.if I get a virus the virus has full control of my system. I dont disagree with this and I can understand it, I just find the benefits of super admin outweigh the risk considering I generally know what I am doing, how to avoid viruses, etc.
I have considered though swapping back to a regular admin account and enabling UAC, however there is so much data, programs installed, program preferences, etc stored on my user, last time I changed it was about a month before things were back to normal. Does anyone know how I could just change the permissions of my current account (the super admin account)?
I just remade my PC and reinstalled Windows 7 and now working on the Software. I must of fixed this in the past, but for the life of me can't remember what I did. when getting into certain folders, or even trying to save certain files, I get the message basically saying. Not allowed, would you like to save to My Documents instead?
I changed the values in HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionProfileList in order to move the default user locations to my second partition. I then created a new user profile but when I try to login I get the message 'The User Profile Service failed the login'. When I set these values back to normal, new accounts work fine but I really want my user accounts on the second partition.
've got a problem getting offline folder permissions to stick after restarts in our domain. Here's what I do:Go to MC>shared folders>shares>C$ (as an example)>properties>offline settings> and then I change "only files and folders users specify..." to "All files...". Apply and done.It works like a champ for what I'm trying to do (enable Restore Previous Versions of files to actually work- I learned that RPV fix from another thread here at seven), but after each restart the settings are restored to default. I'm assuming there's a group policy I can implement that'll auto-set those permissions permanently but I can't find any 'offline' shared folder permissions options anywhere
I want to install the AI utilities that came with my Asus P8P67 Motherboard. When I have them installed, however, all of the non-admin accounts keep getting a string of 5-6 admin password requests to allow the programs to make changes. This happens upon every login and is more than a little tedious.I tried to run them as an administrator but that didn't change anything.I'm running Windows 7 64-bit Professional if it matter.
I'd like to share a folder only for a certain user on a LAN. I'm on Windows 7-hp and the user is on XP-h. But when I go to assign permissions, the Location field only allows choices from my Windows 7 machine. If I put the XP user's name in directly, it flags that error.The Windows 7 user is an admin, and I've tried this with both an XP admin and user account.Surely there is some way to do this? Or alternatively, is there some way to do this via subnets?
I have Windows 7 account named Joe and it is an Administrator. Whenever I try to open a program or shortcut I get the "Open with..." dialog box and my option is Internet Explorer. Another odd thing that I discovered is that if I right click and select on "Run as Administrator" a program or shortcut will open as it should.I also created a seperate Administrator account named Jim and everything opened normally.
So I have just been setting up my new rig and, for several reasons, I was wanting to allow my desktop complete access to my laptop. However, I live in a very friendly household and my computer is in the main area. I allow other people to use the guest account on it all the time, but keep my own account with a password.
We also have many other computers on the same homegroup. I was wanting to allow just my account on my desktop complete access to some (or prefferably all) files on my laptop.
I tried going Local Disk (C Properties >> Sharing tab >> Advanced Sharing button >> 'Share this folder' checkbox >> Permissions button >> Add button
However when i had entered this I could not get my laptop to access any other locations that itself. It was there that I got stuck.
I am grabbing a text file with a list of users in it. I want to then create folders for all those people and then set explicit permissions on those folders to only allow the users and admin access to it. So for the create user folder, I have...
When I try to loop these together it says the folder already exists or the setaccessrule identity references could not be translated. how I loop it in with creating the folder? Or is there a way to just say...create folder based on this username, then take that username and make it the only admin on the folder along with the system admin?
With NTFS and Share permissions is there any way I can allow a user to (in a specific folder):
- Edit and overwrite existing files (like a notepad file) But - Not be allowed to create new files or folders
I have spent quite a while staring at the special permissions screen. When reading about the meanings of the special permissions from the Microsoft, it says that the "Create Files/Write Data" permission allows for the overwriting of existing files but it also allows for the creation of new files. Is there some way i can have one without the other? Split the permission? I have also been told that there is a flaw to this as when you open a word document it creates a temp file in the folder where the word document is, and having permissions set this way would cause the word document not to be able to open because it couldn't create that temp file.
I recently set up a new Windows 7 machine and, when asked for the name to be given to the users folder, I let it use the default name USER. I set up an account with my name on it but the folder name is still USER. It's locked and Rename isn't listed in the options menu displayed when I right-click it. How can I change the folder name?
I recently bought my wife a T510i HP laptop. She felt it was too big for her and wanted a smaller one. I took over the laptop, I had initially set it up for her and had named it as she had wanted turing initial set up.. Example: Computer > Local Disk > Users > MyWifethe mywife is the locked folder that I want to change to my nameHow in the world do I go about doing this? I will do a complete system restore if I must. I realize that I'd have to reload a bunch of software, etc. and my music. I don't mind that but am conconcerned that if that was the case in the restore that the old user name would be put back in.
I have an HP machine that came with Vista. When I got this machine it had some major hardware problems these were fixed.I then had to replace th OS so I went with Win 7. The OS installed fine but I used my name during the install process that was ok because I was going to keep it. Then a very close friend of mine needed a computer because her old XP had died. I decided to give her the HP. I went into system and chaged the, computer name, and control panel, User's and changed that name both area's show that name. But when I go into my computer, C: drive, users my name is still there and I can not change it. The only solution I know might be to get into the regedit and change it there.
i am currently using windows 7 home premium 32 bit and having problem with changing size of user account picture.
what it is is when i change the 128 x 128 picture's size to 64 x 64 and set it as user account picture and see the log on screen, it doesn't actually shrink. instead what i am getting is a blurry version still with the size of 128 x 128.
I have changed my profile picture now many times but for somereason Facebook keeps changing my user id to somebody elses picture and i have no idea how to change it, has anybody else had the same issue or can anybody tell me how to change it???
I build, and then support many computers for my friends and family. I have recently started making them feel a bit more "manufactured" by using a factory-style recovery option (press F9 at boot to enter recovery / uses a hidden recovery partition etc...).
The issue I have though, is I often get asked to "wipe" someone's computer following a virus/malware infestation (and yes, I do supply AV, but that isn't always enough).
So, I use Sysprep to install all additional software, drivers etc... but the one problem I have is that I like to have, and usually always configure PC's to store items like Documents/Pictures/Music/Videos etc... on a seperate partition.
The problem is, when I configure this in Sysprep - the settings are lost when the user completes OOBE.
Ideally, I do not want to move the entire "Users" directory, I just want the libraries to never look at any folders on the C: drive, only the ones on D: (D:\%USERNAME%Documents etc...).
I want it so that when files "detect" where to save, it locates the appropriate directory on the D: drive, so they dont have to always manually locate the folders.
The reason I dont want the entire "Users" folder on D: is that following a restore or 2, it will get messy...
I would like to either automate this during setup, or would happily take a manual approach during Sysprep - as long as it applied these settings to all users as and when they are created.
I would like the cleanest way to do this, ideally without junctions/symlinks.
i've changed drive letters of my hdd and partitions so that coused loss of user;s files foldr content. before i have done that change there were two partitions - C and D. on parition D were my music, my pictures and my videos content, but after i changed drive letter from D to E all those folders are gone. i can make shortcuts, but i want it to be like it used to be when i have installed Windows 7.
I am currently running Windows 7 64-bit off of an 80 GB SSD while storing the majority of my programs (and documents, videos, etc.) on my 1 TB other drive. I am quickly running out of space on the SSD and I think it has to do with the fact that it keeps my saved game files there in the User directory while some saves stay on the F (1 TB) drive. Is there a way to transfer/redirect the profile so that it defaults to saving in a User folder on my F drive?
This all started whenever I wanted to change my text size different by changing my DPI settings. What I did was right click, go to screen resolution, and clicked on "Make text and other items larger or smaller". From this I changed it to 100% from 125%. I noticed it had changed my font size to the 100%. It then made everything SUPER small when I changed my theme settings.Whenever I right click and go into personalization settings, I do the usual customizing to my likings. Since I want to save the theme, I do so by naming it, blah. Now I want to use the blah theme by click on it, and I do so. Everything is fine and dandy until I right click my desktop to refresh(out of habit). This is the before and after of the font sizes.
Before After
My workaround was to set a custom DPI setting, log off like it prompts me to, then changing it back to 100%, again prompting to do so. It is so annoying to do so.
So a new box recently built, when booted, defaults to the local administrator account.This is a Windows 7 machine for a Linux guru that doesn't want to be bothered pressing more buttons than is necessary, if you get my drift. So my question is, after pressing Ctrl+Alt+Del...how do I dictate to Windows that the preferred used is "HisDomainAccount" on our company domain, as opposed to the local admin account?
Earlier today I turned on my Toshiba laptop (Satellite P855-S5200) and got some sort of error screen, and then it brought me to a screen asking if I wanted to do a system repair or start windows normally. I chose system repair, but then it seemed to get stuck in that process (It was taking forever and nothing was happening), so I turned off the laptop (I know, big no no), booted in safe mode, and did a system restore to a restore point from about a week ago. The "starting Windows" screen came and went, no problem. Everything seemed fine till I got to the User Selection screen (the default blue one with the little hummingbird or whatever). Then it just sat there on that screen. I could see the hummingbird and the little squiggly lines, but there were no buttons to click my user. I just let it sit there, and after about 5 minutes, the user names popped up, and I was able to continue using the computer without any problems, no other speed issues whatsoever. It now makes me wait every time, always about 5 minutes, before the user names pop up. It does this when I restart the machine and when I try to switch users.
It is a Pentium Core i7 2.3 Ghz 8 GB RAM Windows 7 Home Premium 64 bit
I changed a user from admin to standard after creating a new admin account. When I boot into the standard user, I am prompted by UAC for the admin password for 4 programs to start. All the programs are ASUS utilities that came with mymotherboard.I have checked the permissions of the programs and the User group has full control.Also, these programs do not show up in the MSCONFIG startup tab. I want the utilities to run but do not want to have to authenticate every time I boot
I am a lab technician for Microsoft classes at a community college. One of our students somehow messed up his hard drive. The computer is running Windows 7 Enterprise SP1 64-bit. The system has two administrator accounts and one standard user account. I am still able to logon with those accounts and there are SID keys for each of these users in the registry.
Now when we create a new user, the account is created without any problems. The user shows up on the logon page and after running the net user command, it shows up there as well. When I try to logon with the new user, I get a message: The User Profile Service failed the logon. User profile cannot be loaded.
None of the new user accounts show up in the registry. The other anomaly that I see is that the Default User folder is missing in each of the Users subdirectory for the three accounts where I have no problems.
I have read the Microsoft Knowledge Base Article 947215 and none of the methods apply to my problem. I also checked Local Group Policies and the Do not logon users with temporary profiles setting is not configured.
I have a fresh system with Windows 7. I have an admin account. I cannot set ownership or permissions on a file contained in a USB drive that I brought over from another XP system. I saw some suggestions to start a control panel with run as rights but could not find the run as option.
I am the only user of my laptop but when I try to open- left click on my CD/DVD drive I get Windows cannot access the specific device,path or file. You may not have the appropriate permissions to access the item.if I right click then click on the play I get the same warning.
How do I map existing User Folders to a newly created User Account?I had existing User Folders on drive D. I added a new drive C and installed the OS on C but changed default location of User Folders to D. Now my existing User Folders are in the Users folder on D but there is no User Account associated with them. If I create a user account with the same name will it map to the existing folder within Users?I did a test of this. I created a folder called Test within Users then created a User account called Test and logged in. It created another folder within Users called Test.Computername.
From my husband's Admin account, I deleted my own User Account, but the account is still there (with a lock icon on it) and I am unable to delete it (gives me the message that the folder is open or in use by another program). I changed the owner to my husband (checked the box "Replace owner on subcontainers and objects") as suggested on this thread and I still can't delete it.istory:- My user profile was corrupted, got the message that a temporary user profile was created.- Rather than going the route of going into the registry as suggested here, I deleted the account but kept the files (was this my mistake)?- When I went to create a new account, it appended HOME.DESKTOP to the end of my name