Behaviour of a dropdown changes in case we are changing the screen resolution. In case we are having lot of items, place of launch of dropdown list is getting changes as soon as we are changing the resolution.
View 2 RepliesIn graphic programs, explorer, etc when I right click I get a drop down box showing "rename". Well right above that is "delete" and I'm frequently getting the two mixed when clicking, though I don't usually actually delete cause I catch that first. Is there a way to seperate those and reorder the drop down list so they are farther apart. It gets to be a nuisance sometimes when I am rename picture files.
View 3 Replies View RelatedI have been having an issue that is occurring at random where after the laptop has been woken up from having powered the screen off, everything else still running, that it starts randomly opening and selecting loads of different windows and options.
Its almost like its racing through and redoing actions almost as if in a recorded session playing back at high speed, however many of the optins its selecting are options I never went into in any session since last full reboot.
Typically this happens for anywhere between 5 and 20 seconds then the system stabalises and runs fine. However I am concerned that during that time options and setttings may be changed without me seeing them occurring which will cause oother problems later.
I am running 7600 RTM, I have done several full virus scans (as well as daily automatic scans) all of which have been clean.
Anyone got any ideas what could be causing this?
I changed the skin, and now i use MAC OS X. Everything is perfect, but i can't change the fonts from right click on desktop...I want them just a bit bigger.I tried with WBS but i have a problem after i restart. I cannot logon again.
View 2 Replies View RelatedOn a Win XP machine you could delete the registry keys under HKLMEnum as the last step before removing the MB and when the new MB was installed the Plug & Play would install the your hardware drivers and properly configure the new MB.Is there a similar process that will work with Win 7? There is no HKLMEnum key in Win 7 registry. There is a HKLMSystemControl Set 001Enum.
View 3 Replies View RelatedEach time I decide to change the theme on my Dell Inspiron laptop Windows 7 automatically turns sounds back on and changes the screen saver. It's so annoying and unnecessary.How can I prevent it from doing this when all I want to do is vary the themes? Or do I have to go through the same routine each time - that of switching off the sounds and restoring my screensaver?
View 10 Replies View RelatedSo in the last month i noticed some of my folders i keep on the desktop change form the newer slicker icon of a folder back to the typical windows yellow folder. Then more and more until all of my folders where like that.Then all of sudden some sounds started to go from a normal contemporary notification sound to a dull sound from XP or older.Then about a week ago the "bar" if you will changed from a typical Win7 style back to a XP one where its dull. And its like that everywhere.
I have tried icon programs at first to fix the folder issue and unless i wanna do it one buy one its sucks and i just want them back to a normal win7 folder nothing fancy.I have tried changing themes via the ones pre installed and it might change my desktop wallpaper it never changes the "bars"Also tried other non microsoft theme programs with the same results.
ALSO i scanned my pc with Malwarebyes, CCleaner, WinASO, AVG and cleaned all up and so on rebooted all the same.Thought i may have installed too many apps or at least big apps (photo/video editing) and i uninstalled a few with no difference.So then i decided to check out my ram. So i make a bootable disc of a memory scanner. Ended up getting into the millions of errors with the ram i had and i stopped it before it was done with the intentions on getting ram and not waiting until scan was done to tell me i had 500 trillion errors lol.
Bought new ram installed it started her up and BAM .... same thing.I have not scanned this ram as my wife uses it while im at work and when im home i do alota 2nd job stuff on it so i dont like having it offline long.
i am running windows 7 ultimate N and well i have a U3 Titanium drive made by san disk. all other usb pen drives work perfectly except for mine, the one with all my work on it. i hav tried uninstalling it but when it tells me it is installed. i am not sure if this is a diver problem or something. i have tried searching google. but i really need a quick solution to this because i hav a major assessment due next week and its on the pen drive.
it is not U3 because i tested my sister's u3 and it works fine, it is not the pen drive because it works on XP and Mac OSX. it is not that my computer cant mount pen drives, because everyone else's works... and i hav attempted al ports, using hubs, KVM's nothing seems to work o.o
the cd drive that is mounted for u3 to start up will mount but the usb wont, cannot access through computer manage> disk management.
When I listen via headphones to Pandora.com streaming music, RealTek will alternate between giving me the background music and almost no vocals, or the vocals (or lead guitar solo etc.) but very faint background. Sometimes the entire song is faint, like right now ("House of the Rising Sun" by The Animals).I've updated the RealTek driver to 6.0.1.6482 and installed the codecs from Realtek..
View 6 Replies View RelatedI notice since upgrading to Windows 7, Explorer shows some quirky behaviour compared with the XP version.My current irritation is when I open a folder containing (say) 500 jpegs that were in filename (ascending) sequence, the folder opens quite quickly and I can see the file icons, but I get a message 'Searching for items...' and a progress bar at the top of the window which takes up to a minute to complete. The end result is always the same... the files are now sorted into descending sequence.It seems to be the case only for jpegs, only when sorted on filename, and only when 'Large Icons' were selected. Even then it only seems to display this behaviour when the folders contain a lot of files (maybe more than 200 jpegs).And it doesn't seem to matter whether or not the folder has recently been opened.I note that if I click on the 'X' next to the progress bar, to stop 'Loading', there isn't a problem.The thumbnails have already been drawn, so what's going on during this process? And why the inversion?
Okay, so I was having some issues before with pinning network files to the explorer item on the taskbar.
I can now replicate the bug happening. I want to see if it's just my setup or windows 7, so I'd be much obliged if someone can test this out for me as well.
First Scenario
1) First map a network drive.
2) Pin it to the explorer item on the taskbar by dragging it there.
3) Open up the destiation through the jump list.
4) navigate a couple of folders down and open any file.
What you should get is the network drive is no longer pinned. However, the folder where the file you just opened resided has taken it's place.
Second Scenario
1) Navigate to a network destination through windows explorer (not a mapped drive)
2) Pin a Folder from that network destination by gragging to the taskbar.
3) Pin another folder than resides inside a folder in step 2
Result: Folder pinned in step 2 is replaced by folder pinned in step 3
All of a sudden after turning on my Windows 7 based notebook this morning, when I select a folder or file with the left mouse button in Windows Explorer, all folders and files from the first to the one being pointed at will be selected. The files & directories stay selected. Double clicking will attempt to open the lot. Very annoying behaviour. Right click on the desired item gets me out of trouble. ANy selected files are deselected and I can then use right click option menu's Open item.
View 3 Replies View RelatedI recently moved to Win 7 and I changed my Windows Explorer configuration to display the file extensions.
Now when I use the F2 shortcut to copy file names, it does not select the file extension.
How can I restore XP behaviour where the file extension was selected as well when I hit F2 ?
i'm not able to change the resolutions in win 7
View 1 Replies View Relatedhow do i change my screen brightness? i have a dell 15 r, and my fn keys aren't working for the brightness. is there a way through control panel?
View 6 Replies View Relatedhttp://007tinar.deviantart.com/art/RONIZ-86392112
RONIZ by ~007TINAR on deviantART Their is a totally cool background. But is it customizable? How can i change the text to make it say Windows Windows 7, instead of that windows xp stuff. And how can i remove that "water-mark"-like thing in the top left corner.
Sometimes when UAC pops up my screen resolution changes from the native 1680x1050 resolution to 1024x768. There doesn't seem to be any reason for the change. Is anybody else having this problem or is it just me?
Windows 7 build 7000 32-bit
Core2Duo E7300 @ 2.66 GHz OC'd to 3 GHz
2 GB RAM
NVIDIA GeForce 9600 GT / 181.22 Vista drivers
I have my screen resolution set to 1920x1080 and it is the right size for me. It keeps changing on me. I right click on my desktop and then click that i want to keep it at this point but it still changes to 800x 600. I took my computer in to get fixed but they couldn't so they put a new hard drive in it free if that makes any difference. I have windows 7. I have internet 8.
View 8 Replies View RelatedEvery time I boot up, the screen settings have changed to a "two monitors" setting. At this setting, the mouse pointer will run off the screen to the right.I have to go to "Screen Resolution" and click "Detect", it finds only one monitor, click OK, and it works fine 'til next boot up.
View 5 Replies View RelatedI'm trying to change the background for the log-on screen for Windows 7 Home Premium. I tried the method explained here [URL](and on other websites), but when I navigated to the backgrounds folder, I wasn't able to add a new picture or delete the current one.I downloaded the Tweaks.com Logon Changer [URL], but it only gives me the choice between pictures in C: / Windows / Web / Wallpaper.And I can't add any pictures there either (nothing happens after I give administrator permission).
View 3 Replies View Relatedhow to change the background of the logon screen however, I'd like to change the little blue ring animation. I'm familiar with resource hacker and restorator but haven't been able to find where this animation is stored to make the desired change.
View 5 Replies View RelatedI used a very simple program in August when the RTM first came out to change the logon screen without having to deal with the registry. Now I can't find it; it was something that didn't require installation, because it doesn't appear in the start menu. Just needed to point to the jpg I wanted and it changed it for me. Can someone point me in the right direction?
Eh, I just found it online again: Windows 7 Logon Background Changer - Customize your Windows 7 welcome screen wallpaper.
I just bought a new Dell N311z I've noticed that when the brightness of my screen is anywhere between maximum and minimum it automatically decreases or increases on will, without me doing anything.
I've also noticed that when the background on the LCD is of a darker colour the brightness decreases and when it's a lighter background the brightness increases itself.
I've tried everything from disabling the ambient light sensor to calling up Dell customer care and after having spent 3 hours on doing what they made me do it still hasn't fixed my problem. I reset the laptop to the factory settings, i reinstalled all the drivers as well.
I have a Dell N311z. Windows 7 Home Premium 64bit.
I find that the Windows 7 boot screen slows down the boot process on my machine. Is there a way to restore the old Vista scrolling loading bar? I know it's there as my netbook uses it.
View 6 Replies View RelatedWhen I click on drop down menu they won't stay open. Could this be something wrong with my mouse?
View 7 Replies View RelatedWhen I have tried to install a font there is no "Install" in the drop down. I open the Zip file, then try to install. Not there like it was with Vista.
View 7 Replies View RelatedI seem to remember that there was a setting that I could change to prevent a drop-down from appearing whenever I clicked on an icon. Now I am presented with a drop-down that has "OPEN' as it's top item.
View 9 Replies View RelatedThis isn't a problem per se, but I'm curious to know if it's possible to change the login screen mouse cursor. It's just the boring plain white arrow. There's probably a registry setting for it but I don't know where. A google search turned up nothing useful. It seems it's not something that interests many others. I'm running W7 Home Premium.
View 3 Replies View RelatedI have been looking for a way to change the logon screen to more of a classic windows look, without success. Then the other day I saw this image on a blog: [URL]. That is basically what I would like to have. DSurely that is a modified logon screen? It does say "Copyright 2008 Microsoft...", so maybe this is from one of the earlier builds of 7?
View 4 Replies View RelatedYou can change the lock/boot screen on Windows 7 by adding the following key:
[HKEY_LOCAL_MACHINE]SoftwareMicrosoftWindowsCurrentVersionAuthenticationLogonUIBackground
Add a DWord value to that key of OEMBackground = 1.
Finally, create a JPG < 250k of the correct size for your default resolution named backgroundDefault.jpg and place it in:
C:WindowsSystem32oobeinfoBackgrounds
Now when you lock or boot you will have a customized image.
Have not tried it my self but saw it somewhere, i dont know if this has been posted but im sure a lot of people would be interested.
How to remove win7 user account picture from logon screen.
View 2 Replies View Related